Search

Interoperability is the key to implementing a wide range of energy systems applications. It involves the seamless cooperation of different methods and components. With smart energy systems, interoperability faces challenges due to integrating differ-ent approaches and technologies. This includes dealing with heterogeneous approaches with various communication proto-cols and data formats. However, it is essential for smart energy systems to carry out thorough interoperability tests. They are usually diverse, and challenging, thus requiring careful consideration of compatibility issues and complex integration scenari-os. Overcoming these challenges requires a systematic approach that includes thorough test planning, rigorous testing, and continuous test monitoring. Although numerous testing approaches exist, most are more developed at the component/device level than at the system level. Consequently, there are few approaches and related facilities to test the interoperability of smart energy approaches and solutions at the system level. This work analyses existing interoperability test concepts, identi-fies enablers and the potential for harmonisation of procedures, and proposes further developments of these approaches., Comment: 14th Mediterranean Conference on Power Generation Transmission, Distribution and Energy Conversion (MED POWER 2024)

The frequency stability of a power system is of paramount importance, as a fast frequency swings in the system can lead to oscillatory instability, and thereby blackouts. A grid-connected microgrid, that can operate in the islanded mode can also possess such deteriorating effect due to the higher share of converter-based sources. In this paper, a coordinated frequency control within a distribution network is discussed, with a higher share of Photovoltaics (PV). The main objective of this paper is to test the grid-forming capabilities of PVs, without the requirement of an energy storage in the network. The tests were carried out with the help of the Typhoon Hardware-in-the-loop (HIL) platform using a real Cypriot network feeder. The real-time results confirm the efficacy of the PV as a grid-forming inverter, provided it has sufficient input (irradiance) to provide for the loads within the system of interest. The grid-forming PV also possesses the capability of reconnection with the utility grid through a synchronizer switch that requires minimal communication, makes the overall control independent of any other power source, subject to certain irradiance and loading conditions., Comment: 13th Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion (MEDPOWER 2022)

Smart energy systems comprise multiple domains like power, thermal, control, information, and communication technology, which increases the complexity of research and development studies. This expansion also requires larger and ever so complex experimental pilot environments driving the demand for geographically distributed multi-research infrastructure tests. The Holistic Test Description approach supports the design of multi-domain and multi-research infrastructure tests by organizing the test cases into comprehensive segments, ensuring all relevant items for testing are covered. These test cases eventually form a pool, which to understand holistically would require studying and reading all the descriptions. This work proposes therefore the concept of Test Case Profiles to improve test case discovery and the structured creation of them. Test Case Profiles add further structure to the indexing in test case repositories. Along with the proposed indexing method, four different use cases are introduced to motivate additional applications of the proposed concept., Comment: 2023 Open Source Modelling and Simulation of Energy Systems (OSMSES)

Modeling and simulation of electrical power systems are becoming increasingly important approaches for the development and operation of novel smart grid functionalities -- especially with regard to data-driven applications as data of certain operational states or misconfigurations can be next to impossible to obtain. The DeMaDs framework allows for the simulation and modeling of electric power grids and malfunctions therein. Furthermore, it serves as a testbed to assess the applicability of various data-driven malfunction detection methods. These include data mining techniques, traditional machine learning approaches as well as deep learning methods. The framework's capabilities and functionality are laid out here, as well as explained by the means of an illustrative example., Comment: 2023 Open Source Modelling and Simulation of Energy Systems (OSMSES)

The changes in the electric energy system toward a sustainable future are inevitable and already on the way today. This often entails a change of paradigm for the electric energy grid, for example, the switch from central to decentralized power generation which also has to provide grid-supporting functionalities. However, due to the scarcity of distributed sensors, new solutions for grid operators for monitoring these functionalities are needed. The framework presented in this work allows to apply and assess data-driven detection methods in order to implement such monitoring capabilities. Furthermore, an approach to a multi-stage detection of misconfigurations is introduced. Details on implementations of the single stages as well as their requirements are also presented. Furthermore, testing and validation results are discussed. Due to its feature of being seamlessly integrable into system operators' current metering infrastructure, clear benefits of the proposed solution are pointed out., Comment: 27th International Conference on Electricity Distribution (CIRED 2023)

Due to the increased deployment of renewable energy sources and intelligent components the electric power system will exhibit a large degree of heterogeneity, which requires inclusive and multi-disciplinary system assessment. The concept of co-simulation is a very attractive option to achieve this; each domain-specific subsystem can be addressed via its own specialized simulation tool. The applicability, however, depends on aspects like standardised interfaces, automated case creation, initialisation, and the scalability of the co-simulation itself. This work deals with the inclusion of the Functional Mock-up Interface for co-simulation into the DIgSILENT PowerFactory simulator, and tests its accuracy, implementation, and scalability for the grid connection study of a wind power plant. The coupling between the RMS mode of PowerFactory and MATLAB/Simulink in a standardised manner is shown. This approach allows a straightforward inclusion of black-boxed modelling, is easily scalable in size, quantity, and component type., Comment: 2019 IEEE PES Innovative Smart Grid Technologies Europe (ISGT-Europe)

Smart grid interoperability is the means to achieve the twin green and digital transition but re-mains heterogeneous and fragmented to date. This work presents the first ideas and corner-stones of an Interoperability Roadmap for the Energy Transition that is being developed by the Horizon Europe int:net project. This roadmap builds on four cornerstones that address open interoperability issues. These are a knowledge base to address the lack of convergence among existing initiatives, a maturity model and a network of testing and certification facilities to ad-dress the lack of practical tools for the industry, and a governance process to address the gap between standards-related approaches of Standards Development Organisations and Research and Innovation projects. A community of practice will be set up to ensure the continuity of the ongoing activities related to smart grid interoperability. To outlive the duration of the int:net project, the aim is to formalise the community of practice as a legal entity., Comment: 12. (Hybrid) Symposium Communications for Energy Systems (ComForEn 2023)

The low-voltage ride-through service is carried out in this paper according to the voltage profile described by the IEC 61400-21 European normative when short-duration voltage sags happen, and some instantaneous reactive power is delivered to the grid in accordance with the Spanish grid code; the mandatory limitation of the amplitude of the three-phase inverter currents to its nominal value is carried out with a novel control strategy, in which a certain amount of instantaneous constant active power can also be delivered to the grid when small or moderate voltage sags happen. A Multiple second order generalized integrator frequency-locked loop synchronization algorithm is employed in order to estimate the system frequency without harmonic distortions, as well as to output the positive- and the negative- sequence of the {\alpha}\b{eta} quantities of the three-phase grid voltages when balanced and unbalanced voltage sags happen in a frequency-adaptive scheme. The current control is carried out in the stationary reference frame, which guarantees the cancellation of the harmonic distortions in the utility grid currents using a Harmonic compensation structure, and the implementation of a constant active power control in order to protect the DC link capacitor from thermal stresses avoiding the appearance of large harmonic distortions at twice the fundamental frequency in the DC link voltage. A case study of a three-phase single-stage grid-connected PV system with a maximum apparent power about 500 kVA is tested with several simulations using MATLAB/SIMULINK firstly, and secondly, with some experiments using the Controller hardware-in-the-loop (CHIL) simulation technique for several types of voltage sags in order to do the final validation of the control algorithms.

The electrical power network is gradually migrating from a centralized generation approach to a decentralized generation with high shares of renewable energy sources (RES). However, power systems with low shares of synchronous generation and consequently low total system inertia, are vulnerable to power imbalances. Such systems can experience frequency stability problems, such as high frequency excursions and higher rates of change of frequency even under small disturbances. This phenomenon is intensified when the grid under investigation has low or no interconnections (islanded) and thus the challenge for stable operation becomes more significant for the operators. This work focuses on how the frequency stability is affected when a photovoltaic (PV) inverter is integrated into a real non-interconnected distribution grid in Cyprus. In order to capture the realistic interactions of this integration, stability experiments in a hardware-in-the-loop (HIL) environment are performed with the aim to provide insightful results for the grid operator., Comment: The 12th Mediterranean Conference on Power Generation, Transmission, Distribution and Energy Conversion (MEDPOWER 2020)

The transition to the smart grid introduces complexity to the design and operation of electric power systems. This complexity has the potential to result in safety-related losses that are caused, for example, by unforeseen interactions between systems and cyber-attacks. Consequently, it is important to identify potential losses and their root causes, ideally during system design. This is non-trivial and requires a systematic approach. Furthermore, due to complexity, it may not possible to reason about the circumstances that could lead to a loss; in this case, experiments are required. In this work, we present how two complementary deductive approaches can be usefully integrated to address these concerns: Systems Theoretic Process Analysis (STPA) is a systems approach to identifying safety-related hazard scenarios; and the ERIGrid Holistic Test Description (HTD) provides a structured approach to refine and document experiments. The intention of combining these approaches is to enable a systematic approach to hazard analysis whose findings can be experimentally tested. We demonstrate the use of this approach with a reactive power voltage control case study for a low voltage distribution network., Comment: 2020 IEEE 18th International Conference on Industrial Informatics (INDIN)

As the landscape of devices that interact with the electrical grid expands, also the complexity of the scenarios that arise from these interactions increases. Validation methods and tools are typically domain specific and are designed to approach mainly component level testing. For this kind of applications, software and hardware-in-the-loop based simulations as well as lab experiments are all tools that allow testing with different degrees of accuracy at various stages in the development life-cycle. However, things are vastly different when analysing the tools and the methodology available for performing system-level validation. Until now there are no available well-defined approaches for testing complex use cases involving components from different domains. Smart grid applications would typically include a relatively large number of physical devices, software components, as well as communication technology, all working hand in hand. This paper explores the possibilities that are opened in terms of testing by the integration of a real-time simulator into co-simulation environments. Three practical implementations of such systems together with performance metrics are discussed. Two control-related examples are selected in order to show the capabilities of the proposed approach., Comment: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society