Search

Abstract 45S5 Bioglass (BG) is composed of a glass network with silicate based on the component and can be doped with various therapeutic ions for the enhancement of hard tissue therapy. Nanoceria (CeO2) has been shown to indicate redox reaction and enhance the biological response. However, few studies focus on the proportion of CeO2-doped and its effect on the cellular bioactivity of CeO2-doped BG (CBG). In this study, we synthesized the CBG series with increasing amounts of doping CeO2 ranging (1 to 12) wt.%. The synthesized CBG series examined the characterization, mineralization capacity, and cellular activity against BG. Our results showed that the CBG series exhibited a glass structure and indicated the redox states between Ce3+ and Ce4+, thus they showed the antioxidant activity by characterization of Ce. The CBG series had a stable glass network structure similar to BG, which showed the preservation of bioactivity by exhibiting mineralization on the surface. In terms of biological response, although the CBG series showed the proliferative activity of pre-osteoblastic cells similar to BG, the CBG series augmented not only the alkaline phosphatase activity but also the osteogenic marker in the mRNA level. As stimulated the osteogenic activity, the CBG series improved the biomineralization. In conclusion, the CBG series might have a potential application for hard tissue therapeutic purposes.

Abstract The study investigated the effects of temperature and centrifugation time on the efficacy of removing uncured resin from 3D-printed clear aligners. Using a photo-polymerizable polyurethane resin (Tera Harz TC-85, Graphy Inc., Seoul, Korea), aligners were printed and subjected to cleaning processes using isopropyl alcohol (IPA) or centrifugation (g-force 27.95g) at room temperature (RT, 23 °C) and high temperature (HT, 55 °C) for 2, 4, and 6 min. The control group received no treatment (NT). Cleaning efficiency was assessed through rheological analysis, weight measurement, transparency evaluation, SEM imaging, 3D geometry evaluation, stress relaxation, and cell viability tests. Results showed increased temperature and longer centrifugation times significantly reduced aligner viscosity, weight (P

Abstract This in vitro study evaluated comprehensively the performances of zirconia brackets with varying yttria proportions in manufacturing advanced orthodontic brackets. Three experimental groups of zirconia brackets were fabricated using yttria-stabilized zirconia (YSZ) materials with different yttria proportions—3 mol% yttria (3Y-YSZ), 4 mol% yttria (4Y-YSZ), and 5 mol% yttria (5Y-YSZ) (Tosoh Ceramic, Japan). A polycrystalline alumina ceramic bracket (3M™ Clarity™ Advanced, MBT 0.022-in. slot) was employed as the control group. Morphological properties, including slot surface structure and dimensions, were examined using scanning electron microscopy and surface profiler analysis. Manufacturing accuracy was assessed with root mean square calculations of trueness and precision. Mechanical properties were tested, encompassing static and kinetic frictional resistance (FR) and fracture strength. Optical stability was evaluated through 20,000 cycles of thermocycling and a 7-day immersion in various coloring agents. Within the limitations of this study, zirconia brackets containing 3 to 5 mol% YSZ presented enhanced reliability in terms of dimensional accuracy and demonstrated favorable optical stability. Notably, owing to its advantageous mechanical properties, the 3Y-YSZ variant showed remarkable potential as an advanced material for fabricating orthodontic brackets.

Abstract Guided bone regeneration aided by the application of occlusive membranes is a promising therapy for diverse inflammatory periodontal diseases. Symbiosis, homeostasis between the host microbiome and cells, occurs in the oral environment under normal, but not pathologic, conditions. Here, we develop a symbiotically integrating occlusive membrane by mimicking the tooth enamel growth or multiple nucleation biomineralization processes. We perform human saliva and in vivo canine experiments to confirm that the symbiotically integrating occlusive membrane induces a symbiotic healing environment. Moreover, we show that the membrane exhibits tractability and enzymatic stability, maintaining the healing space during the entire guided bone regeneration therapy period. We apply the symbiotically integrating occlusive membrane to treat inflammatory-challenged cases in vivo, namely, the open and closed healing of canine premolars with severe periodontitis. We find that the membrane promotes symbiosis, prevents negative inflammatory responses, and improves cellular integration. Finally, we show that guided bone regeneration therapy with the symbiotically integrating occlusive membrane achieves fast healing of gingival soft tissue and alveolar bone.

Abstract The present study compared the thickness and gap width of thermoformed and 3D-printed clear aligners (CAs) using micro-computed tomography (micro-CT) and evaluated their translucency using spectrophotometer. Four groups of CAs were tested: thermoformed with polyethylene terephthalate glycol (TS) or copolyester-elastomer combination (TM), and 3D-printed TC-85 cleaned with alcohol (PA) or with centrifuge (PC). CIELab coordinates were measured (n = 10) to evaluate translucency. CAs (n = 10) were fitted onto respective models and micro-CT was performed to evaluate the thickness and gap width. Thickness and gap width were measured for different tooth type and location in sagittal sections on all sides. The PC group showed significantly higher translucency than the PA group, which was similar to the TS and TM groups (p

Abstract The present study aimed to evaluate the performance of automated skeletal maturation assessment system for Fishman’s skeletal maturity indicators (SMI) for the use in dental fields. Skeletal maturity is particularly important in orthodontics for the determination of treatment timing and method. SMI is widely used for this purpose, as it is less time-consuming and practical in clinical use compared to other methods. Thus, the existing automated skeletal age assessment system based on Greulich and Pyle and Tanner-Whitehouse3 methods was further developed to include SMI using artificial intelligence. This hybrid SMI-modified system consists of three major steps: (1) automated detection of region of interest; (2) automated evaluation of skeletal maturity of each region; and (3) SMI stage mapping. The primary validation was carried out using a dataset of 2593 hand-wrist radiographs, and the SMI mapping algorithm was adjusted accordingly. The performance of the final system was evaluated on a test dataset of 711 hand-wrist radiographs from a different institution. The system achieved a prediction accuracy of 0.772 and mean absolute error and root mean square error of 0.27 and 0.604, respectively, indicating a clinically reliable performance. Thus, it can be used to improve clinical efficiency and reproducibility of SMI prediction.

Abstract Background The purpose of this study is to evaluate stability of vertical dimension following total arch intrusion using miniscrews by measuring the change during treatment and relapse amount after more than one year of retention. Methods Thirty patients (6 men, 24 women) were included in this study. Lateral cephalographs were taken with conventional radiography at the start of treatment (T0), after treatment (T1), and at least one year after treatment (T2). The evaluation was performed by measuring changes of selected parameters during treatment and the extent of relapse after more than one year. Results During total arch intrusion treatment (T1-T0), anterior and posterior teeth intruded significantly. The mean vertical distance between the maxillary posterior teeth and palatal plane was reduced by 2.30 mm (P

Abstract Biofilms induce microbial-mediated surface roughening and deterioration of cement. In this study, zwitterionic derivatives (ZD) of sulfobetaine methacrylate (SBMA) and 2-methacryloyloxyethyl phosphorylcholine, were added in concentrations of 0, 1, and 3% to three different types of commercially available resin-modified glass ionomer cement (RMGIC) (RMC-I: RelyX Luting 2, RMC-II: Nexus RMGI, and RMC-III: GC FujiCEM 2). The unmodified RMGICs served as the control group for comparison. The resistance of Streptococcus mutans to ZD-modified RMGIC was evaluated with a monoculture biofilm assay. The following physical properties of the ZD-modified RMGIC were assessed: wettability, film thickness, flexural strength, elastic modulus, shear bond strength, and failure mode. The ZD-modified RMGIC significantly inhibited biofilm formation, with at least a 30% reduction compared to the control group. The addition of ZD improved the wettability of RMGIC; however, only 3% of the SBMA group was statistically different (P 0.05). The experimental groups' flexural strength, elastic modulus, and shear bond strength showed an insignificant decrease from the control group; there was no statistical difference within the RMC-I (P > 0.05). The mode of failure differed slightly in each group, but all groups showed dominance in the adhesive and mixed failure. Thus, the addition of 1 wt.% ZD in RMGIC favorably enhanced the resistance to Streptococcus mutans without any tangible loss in flexural and shear bond strength.

The first breeding of osprey (Pandion haliaetus) on Jeju Island, South Korea, were observed in 2015, and ospreys bred on three sites. We found a total of three nests and observed that A site nest bred on successfully from 2017 to 2020. The number of eggs per clutch ranged from two to four, with a mean ± SD of 3.16 ± 0.75. The nesting period varied from 71 days to 79 days, with an average duration of 76.2 ± 3.18 days. The incubation period ranged from 34 days to 38 days, averaging 35.8 ± 1.72 days. Fledging dates ranged from July 4th to 13th. The nest tree species was Pinus thunbergii, and the average tree height was 16.2 ± 3.12 m. On average, the nest height from the ground was 14.8 ± 2.57 m. The average diameter at breast height of the nesting trees was 36.1 ± 2.02 cm. Of the total 19 eggs produced, the hatching rate was 91.4% ± 10.2%, fledgling rate was 68.6% ± 26.9%, and breeding success was 65.6% ± 25.1%. Little ecological information is available on osprey living in South Korea; therefore, this study makes a meaningful contribution to provide baseline ecological data from South Korea for this species.

Abstract Low dose and accessibility have increased the application of cone beam computed tomography (CBCT). Often serial images are captured for patients to diagnose and plan treatment in the craniofacial region. However, CBCT images are highly variable and lack harmonious reproduction, especially in the head’s orientation. Though user-defined orientation methods have been suggested, the reproducibility remains controversial. Here, we propose a landmark-free reorientation methodology based on principal component analysis (PCA) for harmonious orientation of serially captured CBCTs. We analyzed three serial CBCT scans collected for 29 individuals who underwent orthognathic surgery. We first defined a region of interest with the proposed protocol by combining 2D rendering and 3D convex hull method, and identified an intermediary arrangement point. PCA identified the y-axis (anterioposterior) followed by the secondary x-axis (transverse). Finally, by defining the perpendicular z-axis, a new global orientation was assigned. The goodness of alignment (Hausdorff distance) showed a marked improvement (> 50%). Furthermore, we clustered cases based on clinical asymmetry and validated that the protocol was unaffected by the severity of the skeletal deformity. Therefore, it could be suggested that integrating the proposed algorithm as the preliminary step in CBCT evaluation will address a fundamental step towards harmonizing the craniofacial imaging records.

Abstract Orthodontic facemasks are extraoral orthodontic appliances that influence maxillary and mandibular development in children with skeletal Class III malocclusion. While a facemask is most effective in patients before the growth spurt, skin irritation is common during the treatment. Therefore, this retrospective study aimed to investigate the prevalence and pattern of such skin changes and identify their possible associated risk factors. We included 177 patients with skeletal Class III malocclusion who underwent facemask therapy. Patient age and sex, orthodontic parameters expressing the severity of malocclusion, the presence of complaints in the temporomandibular joint (TMJ) areas, and the level of patient cooperation were evaluated. Additionally, the severity and onset time of skin reactions were further analyzed. The results indicated that 43.5% of patients developed skin changes typical of irritant contact dermatitis. Skin irritation was significantly associated with the presence of TMJ complaints and female sex. Furthermore, skin irritation was more common in younger patients. Clinicians should pay special attention to the skin areas that come into contact with the appliance during each follow-up visit to detect potential problems. Moreover, patients and their parents should be given adequate information about the possibility, prevention, and management of skin problems during facemask therapy.

Abstract Current method of analyzing three-dimensional soft tissue data, especially in the frontal view, is subjective and has poor reliability. To overcome this limitation, the present study aimed to introduce a new method of analyzing soft tissue data reconstructed by marching cube algorithm (Program S) and compare it with a commercially available program (Program A). Cone-beam computed tomography images of 42 patients were included. Two orthodontists digitized six landmarks (pronasale, columella, upper and lower lip, right and left cheek) twice using both programs in two-week intervals, and the reliability was compared. Furthermore, computer-calculated point (CC point) was developed to evaluate whether human error could be reduced. The results showed that the intra- and inter-examiner reliability of Program S (99.7–100% and 99.9–100%, respectively) were higher than that of Program A (64.0–99.9% and 76.1–99.9%, respectively). Moreover, the inter-examiner difference of coordinate values and distances for all six landmarks in Program S was lower than Program A. Lastly, CC point was provided as a consistent single point. Therefore, it was validated that this new methodology can increase the intra- and inter-examiner reliability of soft tissue landmark digitation and CC point can be used as a landmark to reduce human error.

This study analyzed 5322 camera trap photographs from Halla Mountain Wetland, documenting 1427 independent bird sightings of 26 families and 49 species of Passeriformes. Key observations include morning activities in Cyanoptila cyanomelana and Horornis canturians and afternoon activity in Muscicapa dauurica and Phoenicurus auroreus. Wetlands were significantly preferred (P_i = 0.398) despite their smaller area, contrasting with underutilized grasslands (P_i = 0.181). Seasonal activity variations were notable, with overlap coefficients ranging from 0.08 to 0.81 across species, indicating diverse strategies in resource utilization and thermoregulation. Population density was found to be a critical factor in habitat usage, with high-density species showing more consistent activity patterns. The study’s results demonstrate the ecological adaptability of Passeriformes in the Halla Mountain Wetland while highlighting the limitations of camera trapping methods. These limitations include their fixed field of view and intermittent recording capability, which may not fully capture the spectrum of complex avian behaviors. This research underlines the need for future studies integrating various methodologies, such as direct observation and acoustic monitoring, to gain a more comprehensive understanding of avian ecology.

Abstract Colonization of auto-polymerized acrylic resin by pathogenic Candida albicans is a common problem for denture users. In this study, zinc-modified phosphate-based glass was introduced into an auto-polymerized acrylic resin at concentrations of 3, 5, and 7 wt.%. The mechanical or physical properties (flexural strength, elastic modulus, microhardness, and contact angle), surface morphology of the resultant materials, and the antimicrobial effect on C. albicans were investigated. There were no statistical differences in the mechanical properties between the control and the zinc-modified phosphate-based glass samples (p > 0.05); however, the number of C. albicans colony-forming units was significantly lower in the control group (p

Abstract This cross-sectional study aimed to classify the radiographical characteristics of impacted maxillary canines that were surgically exposed following orthodontic traction and to find out which factor is most closely related to traction duration. This study enrolled 74 patients with 87 maxillary canines. Cone-beam computed tomography images, panoramic radiographs, and medical records were analyzed. Cystic-appearing lesion and resorption of adjacent roots were observed in 26.4% and 23.0% of cases, respectively. Impacted maxillary canines were mostly distributed in the lateral incisor area. The mean (± standard deviation) traction duration for the 47 teeth that met the study criteria was 13.9 (± 8.9) months. Impacted maxillary canines treated with surgical exposure and orthodontic traction showed increasing possibilities of palatal impaction and resorption of the adjacent root as they were located mesially (p

Polyalkenoate cement (PAC) is a promising material for regenerative hard tissue therapy. The ionically rich glass component of PAC encourages bioactive interaction via. the release of essential ions. However, PAC bioactivity is restricted owing to (i) structurally inherent cationic network formers and (ii) surface bacterial biofilm formation. These two factors cause a deficiency in ion release, further complicated by secondary infections and premature therapeutic failure. Here, a multivalent zwitterionic network modifier (mZM) is presented for upregulation of ionic exchange and bioactivity enhancement. By introducing a non-zero charged mZM into PACs, an increase in the proportion of non-bridging oxygen occurs. The network modification promotes ion channel formation, causing a multiple-fold increase in ion release and surface deposition of hydroxy-carbonate apatite (ca. 74%). Experiments ex vivo and animal models also demonstrate the efficient remineralization ability of the mZM. Furthermore, divalent cationic interaction results in bacterial biofilm reduction (ca. 68%) while also influencing a shift in the biofilm species composition, which favors commensal growth. Therefore, PAC modification with mZM offers a promising solution for upregulation of bioactivity, even aiding in customization by targeting site-specific regenerative therapy in future applications.

Abstract This study evaluates the accuracy and efficiency of automatic tooth segmentation in digital dental models using deep learning. We developed a dynamic graph convolutional neural network (DGCNN)-based algorithm for automatic tooth segmentation and classification using 516 digital dental models. We segmented 30 digital dental models using three methods for comparison: (1) automatic tooth segmentation (AS) using the DGCNN-based algorithm from LaonSetup software, (2) landmark-based tooth segmentation (LS) using OrthoAnalyzer software, and (3) tooth designation and segmentation (DS) using Autolign software. We evaluated the segmentation success rate, mesiodistal (MD) width, clinical crown height (CCH), and segmentation time. For the AS, LS, and DS, the tooth segmentation success rates were 97.26%, 97.14%, and 87.86%, respectively (p DS), the means of MD widths were 8.51, 8.28, and 8.63 mm, respectively (p AS > LS), the means of CCHs were 7.58, 7.65, and 7.52 mm, respectively (p DS, AS), and the means of segmentation times were 57.73, 424.17, and 150.73 s, respectively (p

Abstract Background This prospective randomized clinical trial aimed to evaluate the immediate and short-term skeletal, dentoalveolar, and periodontal effects of rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE) in adolescent and young adult patients. Methods This study followed a two-arm, parallel, randomized clinical trial design that recruited patients with transverse maxillary deficiency in a 1:1 allocation ratio. Forty patients (14 men and 26 women) requiring maxillary expansion were randomly allocated to the RPE (n = 20, age = 14.0 ± 4.5) or MARPE (n = 20, age = 14.1 ± 4.2) groups. The assignment was performed via computer-generated block randomization, with a block size of four. Upon identical (35 turns) amount of expansion, low-dose cone-beam computed tomography images were taken before treatment (T0), immediately after expansion (T1), and after a 3-month consolidation period (T2). The primary outcome of this study comprised the assessment of midpalatal suture separation. Secondary outcomes included, skeletal, dentoalveolar, and periodontal measurements, which were performed at each time point. Results The frequency of midpalatal suture separation was 90% (18/20) and 95% (19/20) for the RPE and MARPE groups, respectively. A greater increase in nasal width in the molar region (M-NW) and greater palatine foramen (GPF) was observed immediately after the expansion (T1-T0) and consolidation periods (T2-T0) in the MARPE group compared to the RPE group (P

Abstract Controlling of thickness profile in micro‐scale pixels via an inkjet printing process remains a challenge and strict control of surface energy is required. Herein, the surface energy of each substrate is controlled by using CF4 plasma treatment (CPT) to control thickness profile and improve color conversion efficiency (CCE) of the inkjet printed quantum dots (QDs) color conversion layer (CCL). The bank surface becomes hydrophobic due to the fluorination, while the glass becomes hydrophilic due to the cleaning effect by the CPT. Through a systemic investigation of the polar and non‐polar components of the surface energy, it is found that the ink behavior of inkjet‐printed QDs in the pixels is closely related to the non‐polar component of the surface energy. In addition, it is found that more rigorous control of the surface is required for array printing and a wide range of thickness profile control is possible by CPT. The thickness increases by up to 10 µm, the blue leakage is reduced by 26.38%, and the CCE increases by a maximum of 5.71% depending on the CPT. As a result, the relationship between the thickness profile of the CCL and CCE is confirmed through the fabrication of QD‐organic light emitting diodes.

Abstract To elucidate genetic factors affecting orthodontic treatment duration, we employed targeted next-generation sequencing on DNA from the saliva of 117 patients undergoing orthodontic treatment after premolar extraction. The clinical characteristics of patients are summarized, and the association of clinical variables with treatment duration was assessed. Patients whose treatment duration deviated from the average were classified into an extreme long group or an extreme short group. We identified nine single nucleotide polymorphisms (SNPs) of six genes that significantly differed in the two groups via targeted sequencing. The frequency of the CC genotypes of WNT3A, SPP1 (rs4754, rs9138), and TNFSF11, TT genotype of SPP1 (rs1126616), and GG genotype of SFRP2 was significantly higher in the extreme long group than in the short group. In the extreme short group, the TC genotype of SPP1, AA genotype of P2RX7, CT genotype of TNFSF11, and AG genotype of TNFRSF11A tended to exhibit higher frequency than in the long group. Taken together, we identified genetic polymorphisms related to treatment duration in Korean orthodontic patients undergoing premolar extraction. Our findings could lead to further studies predicting the prolongation of the orthodontic treatment duration, and will be of great aid to patients as well as orthodontists.

Calcium silicate cement (CSC) is widely used as an endodontic material in clinical applications such as direct pulp capping, pulpotomy, or root canal. CSC has good biocompatibility, sealing properties, and the ability to enhance hard tissue regeneration. However, the disadvantage of CSC is the difficulty in handling when placing it into endodontic tissue due to the long setting time. Several attempts have been made to improve handling of CSC; however, these methods were limited by osteogenic properties. To overcome such a disadvantage, this study investigated the use of Pluronic F127 (F127) for the development easy-to-handle novel endodontic CSCs with osteogenic properties. In this case, different concentrations of F127 (5%, 10%, 20%, 30%, and 40%) were implemented to generate CSC specimens H5, H10, H20, H30, and H40, respectively. Calcium ion was continuously released for 28 days. In addition, each group resulted in apatite formation for 28 days corresponding to calcium ion release. The concentration of F127 showed opposite relationships with water solubility and compressive strength. The H20 group showed a high level of osteogenic activity compared to other groups at 14 days. Mineralization of the H20 group was higher than that of the other groups. This study indicates that the novel F127-based hydrogel with CSC can potentially be used as endodontic filler.

A facial scanner and three-dimensional computed tomography (CT) were used to evaluate the three-dimensional change in lip asymmetry before and after two-jaw surgery for 22 patients with facial asymmetry (menton deviation > 3 mm). We used the labrale superius (Ls), deviated/non-deviated-side cheilions (Ch-D/Ch-ND), and labrale inferius (Li) to construct the upper and lower lip planes to evaluate the lip asymmetry. A correlation analysis was performed to determine the factors related to the vertical change in the cheilions (ΔChZ-D/ND). In the transverse axis, Ch-D and Li moved to improve the asymmetry after surgery. All landmarks, except the Ls, moved backward in the anteroposterior axis. In the vertical axis, significant upward movement was observed in all hard tissue landmarks; however, there were no significant changes in the soft tissue. In the lip plane, the difference in the height of Ch-D and Ch-ND was significantly reduced (1.38 mm vs. 0.72 mm). In the anteroposterior axis, the ΔChZ-D/ND showed significant correlations with the mandibular setback. In the vertical axis, the ΔCh-ND showed significant correlations with the maxillary impaction of the non-deviated side. The improvement in lip asymmetry post-surgery was mainly achieved by the movement of the lower lip and Ch-D rather than the upper lip and Ch-ND.

This report describes the case of a 12-year-old female patient with a long mandible experiencing difficulty chewing with the right molar. Considering the age of the patient, bone-anchored maxillary protraction using four miniplates placed below the maxillary zygomatic arch and anterior symphysis of the mandible and Class III intermaxillary elastics were planned. After 12 months, orthodontic treatment was initiated. After extraction of the impacted maxillary right second premolar and mandibular right second primary molar, protraction of the mandibular right molars was performed using a miniplate placed on the anterior part of the mandible as an anchor. Miniscrews were placed in the left posterior part of the mandible to improve the molar relationship and correct the dental midline through distalization of the mandibular left posterior teeth. We reported successful sequential comprehensive nonsurgical treatment in an adolescent with skeletal Class III malocclusion.

Non-native species threaten native ecosystems and species, particularly on islands where rates of endemism and vulnerability to threats are high. Understanding species invasion will aid in providing insights into ecological and evolutionary processes. To identify the non-native sika deer (Cervus nippon) population in Jeju, South Korea, and their phylogenetic affinities, we collected tissue samples from roadkill and the World Natural Heritage Headquarters in Jeju. Mitochondrial DNA cytochrome B (CytB) gene sequences were analyzed to determine two distinct CytB haplotypes. Phylogenetic analysis using maximum likelihood tree revealed two haplotypes of CytB clustered into two different groups representing two subspecies: C. n. yakushimae, native to Japan, and C. n. taiouanus, native to Taiwan. The tentative divergence time between the two subspecies was estimated at 1.81 million years. Our study confirmed that the two subspecies of sika deer are sympatric in the natural ecosystem of Jeju Island. This study provides valuable information to help government and conservation agencies understand alien species and determine control policies for conserving native biodiversity in South Korea.

Biocompatibility is important for the 3D printing of resins used in medical devices and can be affected by photoinitiators, one of the key additives used in the 3D printing process. The choice of ingredients must be considered, as the toxicity varies depending on the photoinitiator, and unreacted photoinitiator may leach out of the polymerized resin. In this study, the use of ethyl (2,4,6-trimethylbenzoyl) phenylphosphinate (TPO-L) as a photoinitiator for the 3D printing of resin was considered for application in medical device production, where the cytotoxicity, colour stability, dimensional accuracy, degree of conversion, and mechanical/physical properties were evaluated. Along with TPO-L, two conventional photoinitiators, phenylbis (2,4,6-trimethylbenzoyl) phosphine oxide (BAPO) and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO), were considered. A total of 0.1 mol% of each photoinitiator was mixed with the resin matrix to prepare a resin mixture for 3D printing. The specimens were printed using a direct light processing (DLP) type 3D printer. The 3D-printed specimens were postprocessed and evaluated for cytotoxicity, colour stability, dimensional accuracy, degree of conversion, and mechanical properties in accordance with international standards and the methods described in previous studies. The TPO-L photoinitiator showed excellent biocompatibility and colour stability and possessed with an acceptable dimensional accuracy for use in the 3D printing of resins. Therefore, the TPO-L photoinitiator can be sufficiently used as a photoinitiator for dental 3D-printed resin.

The wide application of additive manufacturing in dentistry implies the further investigation into oral micro-organism adhesion and biofilm formation on vat-photopolymerization (VP) dental resins. The surface characteristics and microbiological analysis of a VP dental resin, printed at resolutions of 50 μm (EG-50) and 100 μm (EG-100), were evaluated against an auto-polymerizing acrylic resin (CG). Samples were evaluated using a scanning electron microscope, a scanning white-light interferometer, and analyzed for Candida albicans (CA) and Streptococcus mutans (SM) biofilm, as well as antifungal and antimicrobial activity. EG-50 and EG-100 exhibited more irregular surfaces and statistically higher mean (Ra) and root-mean-square (rms) roughness (EG-50-Ra: 2.96 ± 0.32 µm; rms: 4.05 ± 0.43 µm/EG-100-Ra: 3.76 ± 0.58 µm; rms: 4.79 ± 0.74 µm) compared to the CG (Ra: 0.52 ± 0.36 µm; rms: 0.84 ± 0.54 µm) (p < 0.05). The biomass and extracellular matrix production by CA and SM and the metabolic activity of SM were significantly decreased in EG-50 and EG-100 compared to CG (p < 0.05). CA and SM growth was inhibited by the pure unpolymerized VP resin (48 h). EG-50 and EG-100 recorded a greater irregularity, higher surface roughness, and decreased CA and SM biofilm formation over the CG.

This retrospective observational study aimed to examine the correlation and correspondence between skeletal maturation indicators (SMI), cervical vertebral maturation indicators (CVMI), and radius-ulna-short bones (RUS) skeletal maturity scores in Korean adolescents, and to determine whether easily obtainable SMI or CVMI can replace the RUS skeletal maturity score. A total of 1017 participants were included with both hand-wrist radiograph and lateral cephalogram acquired concurrently. From the lateral cephalogram, CVMI was determined; through the hand-wrist radiograph, SMI was categorized, and the RUS skeletal maturity score was evaluated as well. Associations were examined using the Mann–Whitney U test, Spearman’s rank-order correlation analysis, and multiple correspondence analysis. There was no statistically significant difference in chronological age between males and females; however, the SMI, CVMI, and RUS skeletal maturity scores were significantly higher in females. The SMI, CVMI, and RUS skeletal maturity scores showed a statistically significant strong degree of both positive correlation and correspondence. However, a precisely corresponding RUS skeletal maturity score was difficult to obtain for a specific CVMI and SMI stage, implying the absence of a quantitative correlation. In conclusion, detailed evaluation should be conducted using the RUS skeletal maturity score, preferably in cases that require bone age determination or residual growth estimation.

The aim of this study is to investigate the resistance of various fluoride-releasing restorative materials against the demineralization and remineralization of enamel surfaces, including those that have been recently introduced to the market. Three different fluoride-releasing restorative materials were considered: glass ionomer (FI), resin-modified glass ionomer (RL), and an alkasite restorative material (CN). The acid neutralization ability was investigated using pH measurement, and the concentrations of released fluoride and calcium ions were measured. Finally, the demineralization resistance and remineralization effects of enamel were observed using a microhardness tester and SEM. CN showed an initial substantial increase in pH followed by a steady increase, with values higher than those of the other groups (p < 0.05). All three groups released fluoride ions, and the CN group released more calcium ions than the other groups (p < 0.05). In the acid resistance test, from the microhardness and SEM images, the CN group showed effective resistance to demineralization. In the remineralization test, the microhardness results showed that the FI and CN groups recovered the microhardness from the values of the demineralized enamel surface (p < 0.05). This was confirmed by the SEM images from remineralization tests; the CN group showed a recovered demineralized surface when immersed in artificial saliva for 7 days. In conclusion, alkasite restorative material can be an effective material when used in cariogenic environments.

Background: Enterovirus D68 (EV-D68) is a re-emerging pathogen that is particularly common in children and may cause asthma-like respiratory infection and acute flaccid myelitis. However, in Korea, EV-D68 has never been reported thus far. This study aimed to identify EV-D68 from nasopharyngeal aspirates (NPAs) in Korean children with a respiratory tract infection. Materials and Methods: The EV-D68 reference strain was purchased and blindly used to assess the detection ability of three commercial and one in-house mRT-PCR kit in 2018. Then, we selected children whose specimens were positive for human rhinovirus (HRV) and/or enterovirus (EV) by Allplex mRT-PCR (Seegene, Inc., Seoul, Korea) from April to December 2022. Total RNA was extracted from NPAs, and a partial 5’-UTR gene was amplified and sequenced for the identification of HRV/EV species. Additionally, PCR targeting the VP1 gene was performed to assess EV-D68- positive NPAs, followed by sequencing. Phylogenetic analysis and comparison of amino acid sequence alignments were performed using a partial VP1 gene of our and recent international EV-D68 strains. Results: Among the mRT-PCR kits tested, only the in-house kit was able to detect EV-D68 in 2018. However, we detected three EV-D68 strains among children hospitalized with fever and/or respiratory symptoms in September - December 2022 who tested positive for EV by the Allplex kit. Two of them were healthy toddlers with lower respiratory infections accompanied by new-onset wheezing but no neurologic complications. Among 34 children with lower respiratory infection who tested positive for HRV during the same period, EV-D68 was not detected. Phylogenetic analysis revealed that the first Korean EV-D68 belonged to subclade B3. Amino acid sequence alignment of international subclade B3 EV-D68 strains also showed that our strain is genetically more related to those from Europe than those from Japan. Conclusion: We first detected EV-D68 in three Korean children who had EV detected by the Allplex mRT-PCR kit in 2022. EV-D68 also circulated in Korea in fall 2022, but the prevalence and severity seemed to be lower than those in previous reports from other countries. [ABSTRACT FROM AUTHOR]

Ramsar wetlands are known for their high ecological and economic value; however, in some cases, the indigenous species community is rapidly changing owing to the presence of invasive alien plants (IAPs). To address this issue, we conducted a plant survey of five Ramsar wetland sites on Jeju Island from August 2021 to August 2022 and constructed a list of IAP species. A total of 24 IAP plant species belonging to 13 families were identified. Species of the Asteraceae and Poaceae families, which have high seed production, high adaptability to damaged ecosystems, and a wide range of organisms, from annuals to perennials, were found to be abundant. The distribution of IAP species was consistent with the pattern expected during the early stages of IAP invasion in Korea. Additionally, a positive correlation was observed between the distance from residential areas and the number of IAP species. Wetlands not visited by people were found to be relatively intact, while those frequented by tourists and visitors were susceptible to IAPs. These results suggest that the introduction of IAP species into the Jeju Ramsar wetlands may have been the result of anthropogenic activities, such as tourism. Our study demonstrated that the introduction of IAPs into the Jeju Ramsar wetlands is in its early stages and is mainly attributable to human activity. Therefore, it is necessary to identify the invasion pathways, develop strategies to control or reduce invasion, and control the geographic expansion of these species. Our study highlights the threat of alien species to Jeju Ramsar wetlands, providing the basis for a strategy to protect these wetlands from the threat of invasive species. [ABSTRACT FROM AUTHOR]