Search

Even though most information is digitized today, paper as a printing substrate is still essential. The quality of the paper depends on whether it has the properties required for its intended use, which will fundamentally rely on the raw materials used. Nowadays, the production of paper and board is increasingly focused on alternative non-wood raw materials. In this context, the main objective of this research is to improve the quality of prints on laboratory-made papers with supplementary barley pulp by coating the surface of the papers with titanium dioxide coating. Since laboratory-made papers were not subjected to the bleaching process and no additional surface treatments were used, TiO2-based coating proved to be one of the ways to improve the quality of the prints on such substrates. In this study, it was concluded that TiO2-based coating did not affect the colorimetric values of the black prints to the extent that it affected the colorimetric values of the magenta prints. However, density of printed inks was increased up to 14% for prints on laboratory-made papers with higher amount of barley pulp and TiO2-based coating in two layers.

Packaging and labels are used for a variety of products and have become an indispensable part of daily life, while products without labels or packaging cause uncertainty among consumers. The global trend is to reduce the amount of packaging waste by recycling and reusing the same material or using other available waste raw materials. With large quantities of stalks remaining discarded in the fields after harvest each year, cereal straw is emerging as an alternative source of lignocellulosic fibers for secondary green packaging and labels. In this study, the usability of printed papers with discarded lignocellulosic fibers by offset and gravure printing processes for secondary green packaging and labels was observed based on the qualitative parameters of reproduction and ink penetration into the printing substrate. From the obtained results, it can be concluded that gravure prints have greater penetration of the ink into the printing substrate, resulting in more uneven surface coverage with printing ink, compared to offset prints, where the viscosity of the ink and the printing process itself have the greatest influence. Therefore, these substrates with discarded lignocellulosic fibers can be used for secondary green packaging and labeling printed by the offset printing process, while gravure printing requires an additional coating or a larger amount of filler in the paper structure.