Search

This paper presents the first analysis of the contact binary TYC 3801-1529-1. We observed four sets of multiple bands complete light curves and one set of radial velocity curve of the primary component. Based on a simultaneous investigation of our observed and TESS light curves and the radial velocity curve, we found that TYC 3801-1529-1 is an extremely low-mass-ratio, medium contact binary with $q=0.0356$, with the contribution of the third light at a level of about 10\%. Its mass ratio is lower than V1187 Her, making TYC 3801-1529-1 the lowest mass-ratio contact binary ever found in the universe. The light curves observed in 2022 are asymmetric, which is aptly explained by a hot spot on the primary component. A 16-year eclipse timings analysis indicates a secular increase orbital period with a rate of dp/dt$=7.96(\pm0.35)\times10^{-7}$ d yr$^{-1}$. We studied the stability of this target and identified that not only the value of $J_{spin}/J_{orb}$, but also the mass ratio surpass the unstable boundary. Hence, TYC 3801-1529-1 presents a challenge to theoretical research and ought to be considered a progenitor of a contact binary merger., Comment: 6 pages, 3 figures, and 1 table, accepted by A&A Letters, Data available via China-VO PaperData repository

Modern autonomous vehicle perception systems often struggle with occlusions and limited perception range. Previous studies have demonstrated the effectiveness of cooperative perception in extending the perception range and overcoming occlusions, thereby improving the safety of autonomous driving. In recent years, a series of cooperative perception datasets have emerged. However, these datasets only focus on camera and LiDAR, overlooking 4D Radar, a sensor employed in single-vehicle autonomous driving for robust perception in adverse weather conditions. In this paper, to bridge the gap of missing 4D Radar datasets in cooperative perception, we present V2X-Radar, the first large real-world multi-modal dataset featuring 4D Radar. Our V2X-Radar dataset is collected using a connected vehicle platform and an intelligent roadside unit equipped with 4D Radar, LiDAR, and multi-view cameras. The collected data includes sunny and rainy weather conditions, spanning daytime, dusk, and nighttime, as well as typical challenging scenarios. The dataset comprises 20K LiDAR frames, 40K camera images, and 20K 4D Radar data, with 350K annotated bounding boxes across five categories. To facilitate diverse research domains, we establish V2X-Radar-C for cooperative perception, V2X-Radar-I for roadside perception, and V2X-Radar-V for single-vehicle perception. We further provide comprehensive benchmarks of recent perception algorithms on the above three sub-datasets. The dataset and benchmark codebase will be available at \url{http://openmpd.com/column/V2X-Radar}., Comment: 11 pages, 5 figures

In this article we study the inverse problem of determining a semilinear term appearing in an elliptic equation from boundary measurements. Our main objective is to develop flexible and general theoretical results that can be used for developing numerical reconstruction algorithm for this inverse problem. For this purpose, we develop a new method, based on different properties of solutions of elliptic equations, for treating the determination of the semilinear term as a source term from a point measurement of the solutions. This approach not only allows us to make important relaxations on the data used so far for solving this class of inverse problems, including general Dirichlet excitation lying in a space of dimension one and measurements located at one point on the boundary of the domain, but it also allows us to derive a novel algorithm for the reconstruction of the semilinear term. The effectiveness of our algorithm is corroborated by extensive numerical experiments. Notably, as demonstrated by the theoretical analysis, we are able to effectively reconstruct the unknown nonlinear source term by utilizing solely the information provided by the measurement data at a single point.

The concept of skyrmions was introduced as early as the 1960s by Tony Skyrme. The topologically protected configuration embedded in skyrmions has prompted some investigations into their fundamental properties and versatile applications, sparking interest and guiding ongoing development. The topological protection associated with skyrmions was initially observed in systems with interactions. It is widely believed that skyrmions are stable yet relevant confirmation and empirical research remains limited. A pertinent question is whether skyrmion configurations formed by single-particle wave functions also exhibit topological stability. In this study, we affirm this hypothesis by investigating the effects of local decoherence. We analytically and numerically demonstrate the topological resilience of skyrmions and occurrence of transition points of skyrmion numbers in local decoherence of three typical decoherence channels. On the other hand, we show that these qualities are independent of the initial state. From the numerical results, we verify that inhomogeneous but continuous decoherence channels also adhere to the same behaviors and hold topological stability of skyrmions as homogeneous decoherence channels. These properties of skyrmions contribute to further applications in various areas including communication and imaging., Comment: 19 pages

The electron dynamics and SiO2 etching profile evolution in capacitively coupled Ar/CHF3 plasmas driven by sawtooth-waveforms are investigated based on a one-dimensional fluid/Monte-Carlo (MC) model coupled with an etching profile evolution model. The effects of the sawtooth-waveforms synthesized from different numbers of consecutive harmonics, N, of a fundamental frequency of 13.56 MHz on the electron dynamics, ion and neutral transport, as well as the etching profile evolution are revealed in different mixtures of Ar/CHF3. By increasing N, a reduction in electronegativity, a decrease of the DC self-bias voltage, and a transition of the discharge mode from the Drift-Ambipolar (DA) to an {\alpha}-DA hybrid mode is observed accompanied by an enhanced plasma asymmetry. As the CHF3 gas admixture increases, the electronegativity initially increases and then decreases, following a similar trend as the absolute value of the DC self-bias voltage. This is mainly caused by the change in ionization, attachment and de-attachment reaction rates. The obtained results show that placing the substrate on the grounded electrode and using a higher number of harmonic frequencies (N) can achieve a faster etching rate, since higher ion fluxes can be obtained in these scenarios. Additionally, the Ar/CHF3 gas mixing ratio impacts the neutral surface coverage, which in turn affects the etching rate. Therefore, selecting an appropriate gas mixture is also essential for optimizing etching results., Comment: slope asymmetry effect, capacitive radio frequency Ar/CHF3 plasmas, etching profile, synergy of neutral radicals and ions

Non-Hermitian topology provides a research frontier for exploring topological phenomena, revealing novel topological effects and driving the development of emergent materials and platforms. Here, we explore the non-Hermitian Chern insulator phases and the hybrid skin-topological effects in checkerboard lattices with synthetic gauge fluxes. Such lattices can be realized in integrated silicon photonic nanocircuits and microresonators as well as in arrays of evanescently coupled helical optical waveguides. With a simple and tunable design, the system is found to support non-Hermitian hybrid skin topological effects, exhibiting corner skin effects when the lattice symmetry either $C_4$ or $C_2$. An unconventional physical mechanism is revealed as the origin of such a transition which is connected to the corner-induced scattering between the multiple chiral edge channels. These properties are enabled by the large Chern number and the rich non-Hermitian topological edge states in our system, revealing the diverse non-Hermitian topological bulk-boundary correspondence. Our design offers excellent controllability and experimental feasibility, making it appealing for studying non-Hermitian topological phenomena.

P\'olya in 1926 showed that the hypergeometric function $F(z)=\null_2F_1(a,b;c;z)$ has a totally monotone sequence as its coefficients; that is, $F$ is the generating function of a Hausdorff moment sequence, when $0\le a\le 1$ and $0\le b\le c.$ In this paper, we give a complete characterization of such hypergeometric functions $F$ in terms of complex parameters $a,b,c.$ To this end, we study the class of general properties of generating functions of Hausdorff moment sequences and, in particular, we provide a sufficient condition for the class by making use of a Phragm\`en-Lindel\"of type theorem. As an application, we give also a necessary and sufficient condition for a shifted hypergeometric function to be universally starlike., Comment: 15 pages

Crop production management is essential for optimizing yield and minimizing a field's environmental impact to crop fields, yet it remains challenging due to the complex and stochastic processes involved. Recently, researchers have turned to machine learning to address these complexities. Specifically, reinforcement learning (RL), a cutting-edge approach designed to learn optimal decision-making strategies through trial and error in dynamic environments, has emerged as a promising tool for developing adaptive crop management policies. RL models aim to optimize long-term rewards by continuously interacting with the environment, making them well-suited for tackling the uncertainties and variability inherent in crop management. Studies have shown that RL can generate crop management policies that compete with, and even outperform, expert-designed policies within simulation-based crop models. In the gym-DSSAT crop model environment, one of the most widely used simulators for crop management, proximal policy optimization (PPO) and deep Q-networks (DQN) have shown promising results. However, these methods have not yet been systematically evaluated under identical conditions. In this study, we evaluated PPO and DQN against static baseline policies across three different RL tasks, fertilization, irrigation, and mixed management, provided by the gym-DSSAT environment. To ensure a fair comparison, we used consistent default parameters, identical reward functions, and the same environment settings. Our results indicate that PPO outperforms DQN in fertilization and irrigation tasks, while DQN excels in the mixed management task. This comparative analysis provides critical insights into the strengths and limitations of each approach, advancing the development of more effective RL-based crop management strategies., Comment: 10 pages

One dimensional fluid/electron Monte Carlo simulations of capacitively coupled Ar/O2 discharges driven by sawtooth up voltage waveforms are performed as a function of the number of consecutive harmonics driving frequencies of 13.56 MHz, N (1-3), pressure (200-500 mTorr) and gas mixture (10-90 % admixture of O2 to Ar). The effects of these external parameters on the electron dynamics, and the transport of ions and neutrals are revealed at constant peak-to-peak driving voltage. The electronegativity is found to decline as the number of consecutive harmonics increases and the DC self-bias voltage decreases. Increasing the pressure also leads to a decrease in electronegativity. The combination of a decrease in the mean free path of electrons and the presence of the Electrical Asymmetry Effect (EAE) result in different spatio-temporal distributions of the ionization rate, which lead to a reduction in the amplitude of the DC self-bias at higher pressure. As the admixture of electronegative O2 increases, the electronegativity is enhanced, and the discharge mode changes from an {\alpha}-Drift Ambipolar (DA) hybrid to DA mode. This work focuses on linking these fundamental changes of the plasma physics induced by changing external parameters to process relevant charged particle and neutral fluxes to the electrodes. Particular attention is paid to O(1D) flux, because it is a precursor of deposition. In discharges driven by sawtooth up voltage waveforms, placing the substrate on the grounded electrode and increasing the number of consecutive harmonics, N, can facilitate the deposition process, since the O(1D) flux to the substrate is higher in these scenarios. Moreover, at an O2 admixture of 20%, the O(1D) flux is nearly as high as that at an O2 admixture of 90%, indicating that a higher O(1D) flux can be achieved without excessively increasing the O2 admixture., Comment: Ar/O2 gas discharges, electron dynamics, transport of charged and neutral particles, sawtooth up voltage waveforms

Defect engineering in two-dimensional (2D) materials is essential for advancing applications such as gas sensing, single-atom catalysis, and guided nanoparticle self-assembly, enabling the creation of materials with tailored functionalities. This study investigates ion implantation effects on highly ordered pyrolytic graphite (HOPG) surfaces, using scanning tunneling microscopy (STM) and density functional theory (DFT) simulations to identify distinct defect structures. High-energy heavy ions cause inelastic scattering, increasing surface damage, while gold atoms deposited onto defect sites preferentially form atomic clusters. Through focused ion beam techniques, spatially distributed defects were engineered, guiding the self-assembly of nanoparticles. This research highlights the precision of ion irradiation for modifying HOPG surfaces, with significant implications for catalysis, nanotechnology, and the development of functional materials with controlled nanoscale properties., Comment: 16pages, 6figures

Aside from regular beamline experiments at light sources, the preparation steps before these experiments are also worth systematic consideration in terms of automation; a representative category in these steps is attitude tuning, which typically appears in names like beam focusing, sample alignment etc. With the goal of saving time and manpower in both writing and using in mind, a Mamba-based attitude-tuning framework is created. It supports flexible input/output ports, easy integration of diverse evaluation functions, and free selection of optimisation algorithms; with the help from Mamba's infrastructure, machine learning (ML) and artificial intelligence (AI) technologies can also be readily integrated. The tuning of a polycapillary lens and of an X-ray emission spectrometer are given as examples for the general use of this framework, featuring powerful command-line interfaces (CLIs) and friendly graphical user interfaces (GUIs) that allow comfortable human-in-the-loop control. The tuning of a Raman spectrometer demonstrates more specialised use of the framework with customised optimisation algorithms. With similar applications in mind, our framework is estimated to be capable of fulfilling a majority of attitude-tuning needs. Also reported is a virtual-beamline mechanism based on easily customisable simulated detectors and motors, which facilitates both testing for developers and training for users., Comment: 12 pages, 8 figures

This paper developed an efficient method for calibrating triaxial MEMS gyroscopes, which can be effectively utilized in the field environment. The core strategy is to utilize the criterion that the dot product of the measured gravity and the rotation speed in a fixed frame remains constant. To eliminate the impact of external acceleration, the calibration process involves separate procedures for measuring local gravity and rotation speed. Moreover, unlike existing approaches for auto calibration of triaxial sensors that often result in nonlinear optimization problems, the proposed method simplifies the estimation of the gyroscope scale factor by employing a linear least squares algorithm. Extensive numerical simulations have been conducted to analyze the proposed method's performance in calibrating the six-parameter triaxial gyroscope model, taking into consideration measurements corrupted by simulated noise. Experimental validation was also carried out using two commercially available MEMS inertial measurement units (LSM9DS1) and a servo motor. The experimental results effectively demonstrate the efficacy of the proposed calibration approach.

Unmanned aerial vehicle (UAV) remote sensing is widely applied in fields such as emergency response, owing to its advantages of rapid information acquisition and low cost. However, due to the effects of shooting distance and imaging mechanisms, the objects in the images present challenges such as small size, dense distribution, and low inter-class differentiation. To this end, we propose a multimodal remote sensing detection network that employs a quad-directional selective scanning fusion strategy called RemoteDet-Mamba. RemoteDet-Mamba simultaneously facilitates the learning of single-modal local features and the integration of patch-level global features across modalities, enhancing the distinguishability for small objects and utilizing local information to improve discrimination between different classes. Additionally, the use of Mamba's serial processing significantly increases detection speed. Experimental results on the DroneVehicle dataset demonstrate the effectiveness of RemoteDet-Mamba, which achieves superior detection accuracy compared to state-of-the-art methods while maintaining computational efficiency and parameter count.

Large-scale speech generation models have achieved impressive performance in the zero-shot voice clone tasks relying on large-scale datasets. However, exploring how to achieve zero-shot voice clone with small-scale datasets is also essential. This paper proposes SF-Speech, a novel state-of-the-art voice clone model based on ordinary differential equations and contextual learning. Unlike the previous works, SF-Speech employs a multi-stage generation strategy to obtain the coarse acoustic feature and utilizes this feature to straighten the curved reverse trajectories caused by training the ordinary differential equation model with flow matching. In addition, we find the difference between the local correlations of different types of acoustic features and demonstrate the potential role of 2D convolution in modeling mel-spectrogram features. After training with less than 1000 hours of speech, SF-Speech significantly outperforms those methods based on global speaker embedding or autoregressive large language models. In particular, SF-Speech also shows a significant advantage over VoiceBox, the best-performing ordinary differential equation model, in speech intelligibility (a relative decrease of 22.4\% on word error rate) and timbre similarity (a relative improvement of 5.6\% on cosine distance) at a similar scale of parameters, and even keep a slight advantage when the parameters of VoiceBox are tripled., Comment: Submitted to TASLP

In this paper, we investigate a transmission eigenvalue problem that couples the principles of acoustics and elasticity. This problem naturally arises when studying fluid-solid interactions and constructing bubbly-elastic structures to create metamaterials. We uncover intriguing local geometric structures of the transmission eigenfunctions near the corners of the domains, under typical regularity conditions. As applications, we present novel unique identifiability and visibility results for an inverse problem associated with an acoustoelastic system, which hold practical significance.

In this study, we propose and develop an enhanced three-dimensional coupled wave theory (3D CWT) to investigate the optical field behavior in photonic crystal surface-emitting terahertz quantum cascade lasers (THz-QCLs). By incorporating an effective permittivity enhancement (EP) model and a self-consistent iteration (SCI) method, we successfully address the numerical dispersion issues encountered in analytical methods when dealing with metallic waveguide structures. The results demonstrate that the EP and SCI-enhanced 3D TM mode CWT achieves computational accuracy comparable to traditional numerical simulation methods such as finite-difference time-domain (FDTD), while significantly reducing the required computational resources, including time and memory, to just tens of minutes. Moreover, this method provides a clear physical insight, revealing the reasons behind the current low extraction efficiency in surface-emitting THz-QCLs. Our study showcases the potential of the EP and SCI-enhanced 3D CWT as a powerful simulation tool in the research of photonic crystal surface-emitting lasers, offering a new theoretical foundation and optimization direction for future laser designs., Comment: 12 pages

Hallucination is a key roadblock for applications of Large Language Models (LLMs), particularly for enterprise applications that are sensitive to information accuracy. To address this issue, two general approaches have been explored: Retrieval-Augmented Generation (RAG) to supply LLMs with updated information as context, and fine-tuning the LLMs with new information and desired output styles. In this paper, we propose Honest AI: a novel strategy to fine-tune "small" language models to say "I don't know" to reduce hallucination, along with several alternative RAG approaches. The solution ranked 1st in Task 2 for the false premise question. The alternative approaches include using RAG with search engine and knowledge graph results, fine-tuning base LLMs with new information and combinations of both approaches. Although all approaches improve the performance of the LLMs, RAG alone does not significantly improve the performance and fine-tuning is needed for better results. Finally, the hybrid approach achieved the highest score in the CRAG benchmark. In addition, our approach emphasizes the use of relatively small models with fewer than 10 billion parameters, promoting resource efficiency.

Image style transfer has attracted widespread attention in the past few years. Despite its remarkable results, it requires additional style images available as references, making it less flexible and inconvenient. Using text is the most natural way to describe the style. More importantly, text can describe implicit abstract styles, like styles of specific artists or art movements. In this paper, we propose a Contrastive Learning for Artistic Style Transfer (CLAST) that leverages advanced image-text encoders to control arbitrary style transfer. We introduce a supervised contrastive training strategy to effectively extract style descriptions from the image-text model (i.e., CLIP), which aligns stylization with the text description. To this end, we also propose a novel and efficient adaLN based state space models that explore style-content fusion. Finally, we achieve a text-driven image style transfer. Extensive experiments demonstrate that our approach outperforms the state-of-the-art methods in artistic style transfer. More importantly, it does not require online fine-tuning and can render a 512x512 image in 0.03s., Comment: 18 pages, 8 figures

In the post-fifth generation (5G) era, escalating user quality of service (QoS) strains terrestrial network capacity, especially in urban areas with dynamic traffic distributions. This paper introduces a novel cooperative unmanned aerial vehicle relay-based deployment (CUD) framework in satellite air-ground integrated networks (SAGIN). The CUD strategy deploys an unmanned aerial vehicle-based relay (UAVr) in an amplify-andforward (AF) mode to enhance user QoS when terrestrial base stations fall short of network capacity. By combining low earth orbit (LEO) satellite and UAVr signals using cooperative diversity, the CUD framework enhances the signal to noise ratio (SNR) at the user. Comparative evaluations against existing frameworks reveal performance improvements, demonstrating the effectiveness of the CUD framework in addressing the evolving demands of next-generation networks., Comment: 5 pages, 3 figures, to appear in IEEE 100th Vehicular Technology Conference (VTC2024-Fall)

Radio map construction based on extensive measurements is accurate but expensive and time-consuming, while environment-aware radio map estimation reduces the costs at the expense of low accuracy. Considering accuracy and costs, a first-predict-then-correct (FPTC) method is proposed by leveraging generative adversarial networks (GANs). A primary radio map is first predicted by a radio map prediction GAN (RMP-GAN) taking environmental information as input. Then, the prediction result is corrected by a radio map correction GAN (RMC-GAN) with sparse measurements as guidelines. Specifically, the self-attention mechanism and residual-connection blocks are introduced to RMP-GAN and RMC-GAN to improve the accuracy, respectively. Experimental results validate that the proposed FPTC-GANs method achieves the best radio map construction performance, compared with the state-of-the-art methods.

Counterfeit products such as drugs and vaccines as well as luxury items such as high-fashion handbags, watches, jewelry, garments, and cosmetics, represent significant direct losses of revenue to legitimate manufacturers and vendors, as well as indirect costs to societies at large. We present the world's first purely computer-vision-based system to combat such counterfeiting-one that does not require special security tags or other alterations to the products or modifications to supply chain tracking. Our deep neural network system shows high accuracy on branded garments from our first manufacturer tested (99.71% after 3.06% rejections) using images captured under natural, weakly controlled conditions, such as in retail stores, customs checkpoints, warehouses, and outdoors. Our system, suitably transfer trained on a small number of fake and genuine articles, should find application in additional product categories as well, for example fashion accessories, perfume boxes, medicines, and more.

Motivated by a rheumatoid arthritis clinical trial, we propose a new Bayesian method called SPx, standing for synthetic prior with covariates, to borrow information from historical trials to reduce the control group size in a new trial. The method involves a novel use of Bayesian model averaging to balance between multiple possible relationships between the historical and new trial data, allowing the historical data to be dynamically trusted or discounted as appropriate. We require only trial-level summary statistics, which are available more often than patient-level data. Through simulations and an application to the rheumatoid arthritis trial we show that SPx can substantially reduce the control group size while maintaining Frequentist properties.

Inverse problems in physical or biological sciences often involve recovering an unknown parameter that is random. The sought-after quantity is a probability distribution of the unknown parameter, that produces data that aligns with measurements. Consequently, these problems are naturally framed as stochastic inverse problems. In this paper, we explore three aspects of this problem: direct inversion, variational formulation with regularization, and optimization via gradient flows, drawing parallels with deterministic inverse problems. A key difference from the deterministic case is the space in which we operate. Here, we work within probability space rather than Euclidean or Sobolev spaces, making tools from measure transport theory necessary for the study. Our findings reveal that the choice of metric -- both in the design of the loss function and in the optimization process -- significantly impacts the stability and properties of the optimizer.

Let $(\mathcal{A}, \mathcal{B}, \mathcal{C}, i^{*}, i_{\ast}, i^{!},j_!, j^\ast, j_\ast)$ be a recollement of extriangulated categories. We show that there is a bijection between thick subcategories in $\mathcal{C}$ and thick subcategories in $\mathcal{B}$ containing $i_{\ast}\mathcal{A}$. Futhermore, the thick subcategories $\mathcal{V}$ in $\mathcal{B}$ containing $i_{\ast}\mathcal{A}$ can induce a new recollement relative to $\mathcal{A}$ and $j^{\ast}\mathcal{V}$. We also prove that silting subcategories in $\mathcal{A}$ and $\mathcal{C}$ can be glued to get silting subcategories in $\mathcal{B}$ and the converse holds under certain conditions., Comment: 19 pages

Diffusion-based image super-resolution (SR) models have attracted substantial interest due to their powerful image restoration capabilities. However, prevailing diffusion models often struggle to strike an optimal balance between efficiency and performance. Typically, they either neglect to exploit the potential of existing extensive pretrained models, limiting their generative capacity, or they necessitate a dozens of forward passes starting from random noises, compromising inference efficiency. In this paper, we present DoSSR, a Domain Shift diffusion-based SR model that capitalizes on the generative powers of pretrained diffusion models while significantly enhancing efficiency by initiating the diffusion process with low-resolution (LR) images. At the core of our approach is a domain shift equation that integrates seamlessly with existing diffusion models. This integration not only improves the use of diffusion prior but also boosts inference efficiency. Moreover, we advance our method by transitioning the discrete shift process to a continuous formulation, termed as DoS-SDEs. This advancement leads to the fast and customized solvers that further enhance sampling efficiency. Empirical results demonstrate that our proposed method achieves state-of-the-art performance on synthetic and real-world datasets, while notably requiring only 5 sampling steps. Compared to previous diffusion prior based methods, our approach achieves a remarkable speedup of 5-7 times, demonstrating its superior efficiency. Code: https://github.com/QinpengCui/DoSSR., Comment: This paper is accepted by NeurIPS 2024

In this paper, we mainly consider the arithmetic properties of the cyclotomic matrix $B_p(k)=\left[J_p(\chi^{ki},\chi^{kj})^{-1}\right]_{1\le i,j\le (p-1-k)/k}$, where $p$ is an odd prime, $1\le k

Non-Hermitian systems, going beyond conventional Hermitian systems, have brought in intriguing concepts such as exceptional points and complex spectral topology as well as exotic phenomena such as non-Hermitian skin effects (NHSEs). However, previous studies on non-Hermitian systems predominantly focus on the properties of eigenstates, with rather limited discussions on non-Hermitian dynamic phenomena. Here, inspired by the celebrated success of the parity-time symmetry in non-Hermitian physics, we theoretically study a one-dimensional non-Hermitian system with glide-time reversal (GT) symmetry. We discover that the GT symmetry leads to unique physical properties and enables rich dynamic phenomena in non-Hermitian systems. Remarkably, we reveal the dynamic NHSEs that exhibit diverse behaviors across distinct dynamic phases, elucidating the richness of non-Hermitian dynamics. We establish the theoretical frameworks for understanding the rich non-Hermitian dynamic phenomena. We further show that the rich dynamic phases in the GT-symmetric systems enable the remarkable tuning of the dynamics in the bulk as well as at the edge boundaries. These include the directional wave propagation and amplification in the bulk, as well as the wave trapping and the dynamic patterns at the edge boundaries. With both the development in the theoretical framework and the study of the rich non-Hermitian dynamic phases, this work serves as a stepstone for future studies on non-Hermitian dynamics with a special emphasize on the pivotal role of the lattice symmetry.

In this letter, we propose an airborne maneuverable bi-static integrated sensing and communication system where both the transmitter and receiver are unmanned aerial vehicles. By timely forming a dynamic bi-static range based on the motion information of the target, such a system can provide an adaptive two dimensional tracking and communication services. Towards this end, a trajectory optimization problem for both transmits and receive UAV is formulated to achieve high-accurate motion state estimation by minimizing the time-variant Cramer Rao bound, subject to the sufficient communication signal-to-noise ratio to maintain communication channel prediction error. Then we develop an efficient approach based on the successive convex approximation technique and the S-procedure to address the problem. Numerical results demonstrate that our proposed airborne maneuverable bi-static ISAC system is able to obtain higher tracking accuracy compared with the static or semi-dynamic ISAC system.

Inspired by the gradient flow viewpoint of the Landau equation and corresponding dynamic formulation of the Landau metric in [arXiv:2007.08591], we develop a novel implicit particle method for the Landau equation in the framework of the JKO scheme. We first reformulate the Landau metric in a computationally friendly form, and then translate it into the Lagrangian viewpoint using the flow map. A key observation is that, while the flow map evolves according to a rather complicated integral equation, the unknown component is merely a score function of the corresponding density plus an additional term in the null space of the collision kernel. This insight guides us in designing and training the neural network for the flow map. Additionally, the objective function is in a double summation form, making it highly suitable for stochastic methods. Consequently, we design a tailored version of stochastic gradient descent that maintains particle interactions and significantly reduces the computational complexity. Compared to other deterministic particle methods, the proposed method enjoys exact entropy dissipation and unconditional stability, therefore making it suitable for large-scale plasma simulations over extended time periods.

The data volumes generated by the WALLABY atomic Hydrogen (HI) survey using the Australiian Square Kilometre Array Pathfinder (ASKAP) necessitate greater automation and reliable automation in the task of source-finding and cataloguing. To this end, we introduce and explore a novel deep learning framework for detecting low Signal-to-Noise Ratio (SNR) HI sources in an automated fashion. Specfically, our proposed method provides an automated process for separating true HI detections from false positives when used in combination with the Source Finding Application (SoFiA) output candidate catalogues. Leveraging the spatial and depth capabilities of 3D Convolutional Neural Networks (CNNs), our method is specifically designed to recognise patterns and features in three-dimensional space, making it uniquely suited for rejecting false positive sources in low SNR scenarios generated by conventional linear methods. As a result, our approach is significantly more accurate in source detection and results in considerably fewer false detections compared to previous linear statistics-based source finding algorithms. Performance tests using mock galaxies injected into real ASKAP data cubes reveal our method's capability to achieve near-100% completeness and reliability at a relatively low integrated SNR~3-5. An at-scale version of this tool will greatly maximise the science output from the upcoming widefield HI surveys., Comment: 14 pages, 12 figures, accepted for publication in the Publications of the Astronomical Society of Australia

In recent years, speech generation technology has advanced rapidly, fueled by generative models and large-scale training techniques. While these developments have enabled the production of high-quality synthetic speech, they have also raised concerns about the misuse of this technology, particularly for generating synthetic misinformation. Current research primarily focuses on distinguishing machine-generated speech from human-produced speech, but the more urgent challenge is detecting misinformation within spoken content. This task requires a thorough analysis of factors such as speaker identity, topic, and synthesis. To address this need, we conduct an initial investigation into synthetic spoken misinformation detection by introducing an open-source dataset, SpMis. SpMis includes speech synthesized from over 1,000 speakers across five common topics, utilizing state-of-the-art text-to-speech systems. Although our results show promising detection capabilities, they also reveal substantial challenges for practical implementation, underscoring the importance of ongoing research in this critical area., Comment: Accepted in SLT 2024

This paper selected eight totally eclipsing contact binaries for photometric and spectroscopic studies, spectral data were analyzed by ULySS, and photometric data were analyzed using PHOEBE through MCMC sampling. We used two methods to calculate the initial values for running MCMC: one method is a new approach proposed by ourselves to model light curves without spots, while the other method is the genetic algorithm (GA) which can determine physical parameters with spot. Due to the results, these eight targets are all small mass ratio contact binary stars with a mass ratio below 0.25. There are four systems exhibiting O'Connell effect. By adding a dark spot on the primary component, the ideal fitting can be obtained. Meanwhile, it was found that two systems are shallow contact binaries, while the remaining six are moderate contact binaries. An O-C analysis of the eight eclipsing binary stars revealed that seven of them exhibit long-term changes. Four of them display a long-term decreasing trend, while the other three show a long-term increasing trend, and two targets exhibit periodic variations. The decrease in period may be caused by the transfer of matter from the more massive component to the less massive component, while the increase in period may be caused by the transfer of matter from the less massive component to the more massive component. The absolute physical parameters, orbital angular momentum, initial masses, and ages of these eight systems were calculated. Additionally, their mass-luminosity and mass-radius distributions were analyzed., Comment: 20 pages, 9 figures, and 12 tables, accepted by ApJ

The transition metal dichalcogenides (TMDCs) with a 1T' structural phase are predicted to be two-dimensional topological insulators at zero temperature. Although the quantized edge conductance of 1T'-WTe$_2$ has been confirmed to survive up to 100 K, this temperature is still relatively low for industrial applications. Addressing the limited studies on temperature effects in 1T'-TMDCs, our research focuses on the electronic and crystal properties of the epitaxial 1T'-WSe$_2$ monolayers grown on bilayer graphene (BLG) and SrTiO$_3$(100) substrates at various temperatures. For the 1T'-WSe$_2$ grown on BLG, we observed a significant thermal expansion effect on its band structures with a thermal expansion coefficient of $\sim$60$\times$10$^{-6}$ K$^{-1}$. In contrast, the 1T'-WSe$_2$ grown on SrTiO$_3$(100) exhibits minimal changes with varied temperatures due to the enhanced strain exerted by the substrate. Besides, A significant Coulomb gap (CG) was observed pinned at the Fermi level in the angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling spectroscopy (STS). The CG was founded to decrease with increasing temperatures, and can persist up to 200 K for 1T'-WSe$_2$/BLG, consistent with our Monte Carlo simulations. The robustness of the CG and the positive fundamental gap endow the epitaxial 1T'-WSe$_2$ monolayers with huge potential for realizing the quantum spin Hall devices.

Variational Auto-Encoders (VAEs) have emerged as powerful probabilistic models for generative tasks. However, their convergence properties have not been rigorously proven. The challenge of proving convergence is inherently difficult due to the highly non-convex nature of the training objective and the implementation of a Stochastic Neural Network (SNN) within VAE architectures. This paper addresses these challenges by characterizing the optimization trajectory of SNNs utilized in VAEs through the lens of Neural Tangent Kernel (NTK) techniques. These techniques govern the optimization and generalization behaviors of ultra-wide neural networks. We provide a mathematical proof of VAE convergence under mild assumptions, thus advancing the theoretical understanding of VAE optimization dynamics. Furthermore, we establish a novel connection between the optimization problem faced by over-parameterized SNNs and the Kernel Ridge Regression (KRR) problem. Our findings not only contribute to the theoretical foundation of VAEs but also open new avenues for investigating the optimization of generative models using advanced kernel methods. Our theoretical claims are verified by experimental simulations., Comment: Accepted by Machine Learning journal

Two-dimensional metal oxides play an important role in electronics and optoelectronics, and it is still a challenge to obtain thin oxides film. Here, a fluidic exfoliation method is applied to synthesis the metal oxides film by using galinstan as the reactant, and Ga2O3 film with ~1 cm size is obtained. Optical microscope and scanning electron microscope images show that the Ga2O3 film is exfoliated from the galinstan without any droplets left. Energy Dispersive X-Ray measurements confirm the existence of the Ga2O3 film. Transmission electron microscope and selected area electron diffraction patterns indicate the oxidation process do not have a prior direction. The alloy liquid based fluidic exfoliation method in room temperature provide a promising route for the synthesis of two-dimensional mental oxides, which shows significant applications in electronic and photoelectronic devices., Comment: 10 pages, 4 figues

Motivated by the challenge of moment recovery in hydrodynamic approximation in kinetic theory, we propose a data-driven approach for the hydrodynamic models. Inspired by continuous data assimilation, our method introduces a relaxation-based nudging system coupled with a novel discretization technique. This approach facilitates the simultaneous recovery of both the force term and a high-resolution solution from sparsely observed data. To address potential numerical artifacts, we use kernel regression to fit the observed data. We also analyze the convergence of the proposed nudging system under both full and partial data scenarios. When applied to moment systems, the source term involves the derivative of higher-order moments, our approach serves as a crucial step for data preparation in machine-learning based moment closure models. Multiple numerical experiments demonstrate the effectiveness of our algorithm, and we discuss its potential extension to high-dimensional systems.

Cross-domain recommendation (CDR) aims to improve recommendation accuracy in sparse domains by transferring knowledge from data-rich domains. However, existing CDR methods often assume the availability of user-item interaction data across domains, overlooking user privacy concerns. Furthermore, these methods suffer from performance degradation in scenarios with sparse overlapping users, as they typically depend on a large number of fully shared users for effective knowledge transfer. To address these challenges, we propose a Federated Prototype-based Contrastive Learning (CL) method for Privacy-Preserving CDR, named FedPCL-CDR. This approach utilizes non-overlapping user information and prototypes to improve multi-domain performance while protecting user privacy. FedPCL-CDR comprises two modules: local domain (client) learning and global server aggregation. In the local domain, FedPCL-CDR clusters all user data to learn representative prototypes, effectively utilizing non-overlapping user information and addressing the sparse overlapping user issue. It then facilitates knowledge transfer by employing both local and global prototypes returned from the server in a CL manner. Simultaneously, the global server aggregates representative prototypes from local domains to learn both local and global prototypes. The combination of prototypes and federated learning (FL) ensures that sensitive user data remains decentralized, with only prototypes being shared across domains, thereby protecting user privacy. Extensive experiments on four CDR tasks using two real-world datasets demonstrate that FedPCL-CDR outperforms the state-of-the-art baselines.

Generating controllable optical vortex (OV) lattices (OVLs) with arbitrary-order topological charge (TC) and superior optical characteristics are highly desirable for various applications. Here, we report an experimental realization of circularly-symmetric OVLs with alternating positive and negative TCs of order +/-n, referred to the $n$th-order circularly-symmetric alternating OVL (CSAOVL). The focusing fields of such CSAOVLs exhibit the very interesting patterns with a period of 4 for different n values, and their intensity and phase distributions can be regulated using the radial and azimuthal parameters. Particularly, the formed central bright spot in the focusing fields of those CSAOVLs with n equaling to a multiple of 4 is observed to be much smaller than a Gaussian spot. The results can promote significantly the exploration of structured OVLs and provide potential applications in particle manipulation, imaging, and the realization of complex interactions between optical lattices and microscope particles such as atoms and micro- or nano-particles., Comment: 9 pages, 5 figures, 1 table and plus the supplemental materials

Bio-inspired flapping wings have been extensively studied for their remarkable aerodynamic performance. Recently, their noise emission has attracted growing interest, but a careful analysis of scaling laws for their sound generation is missing. This work presents scaling laws for the sound generation of bio-inspired flapping wings during hovering flight based on the potential flow theory and Ffowcs Williams-Hawkings acoustic analogy. Direct numerical simulations considering a range of parameters including the Reynolds number, Mach number and wing kinematics confirms that the proposed scaling laws capture the major physics involved and their predictions agree well with the numerical results. The scaling laws can be used as a powerful tool for engineers in the design of micro-aerial vehicles considering both aerodynamics and acoustics performances simultaneously.

With the increasing complexity of the traffic environment, the significance of safety perception in intelligent driving is intensifying. Traditional methods in the field of intelligent driving perception rely on deep learning, which suffers from limited interpretability, often described as a "black box." This paper introduces a novel type of loss function, termed "Entropy Loss," along with an innovative training strategy. Entropy Loss is formulated based on the functionality of feature compression networks within the perception model. Drawing inspiration from communication systems, the information transmission process in a feature compression network is expected to demonstrate steady changes in information volume and a continuous decrease in information entropy. By modeling network layer outputs as continuous random variables, we construct a probabilistic model that quantifies changes in information volume. Entropy Loss is then derived based on these expectations, guiding the update of network parameters to enhance network interpretability. Our experiments indicate that the Entropy Loss training strategy accelerates the training process. Utilizing the same 60 training epochs, the accuracy of 3D object detection models using Entropy Loss on the KITTI test set improved by up to 4.47\% compared to models without Entropy Loss, underscoring the method's efficacy. The implementation code is available at \url{https://github.com/yhbcode000/Eloss-Interpretability}.

Precipitate shearing mechanisms during compressive creep of L12-containing CoNi-base alloys with different Ti/Al ratio have been investigated in this work. Interrupted creep tests were conducted at 950 degree under air with constant load stress of 241 MPa. It was found that the creep resistance increases with Ti/Al ratio rising in CoNi-based alloys. In addition, we firstly found that the type of planar defects on (111) planes during precipitate shearing change from antiphase boundary (APB) towards superlattice extrinsic stacking fault (SESF) with Ti content increasing - shearing of the gamma' phase is mainly dominated by APB in Ti-free and low-Ti alloys but dominated by SESF in high-Ti alloys. By employing density functional theory (DFT), the APB energy was found be lower than complex stacking fault (CSF) energy in Ti-free and low-Ti alloys but this situation becomes opposite in high-Ti containing alloys. Additionally, the SESF energy is lower than SISF energy in L12-(Co,Ni)3Ti structure strongly supporting SESFs formation in high-Ti alloys. By energy dispersive X-ray spectroscopy analysis under the scanning transmission electron microscope mode, the observed chemical segregation enables APB becoming disordered gamma phase structure in Ti-free and low-Ti alloys and enables SESF becoming local ordered Eta phase structure in high-Ti alloys. However, the microtwins were found as well in high-Ti alloys which usually contributes higher creep strain than other planar defects, e.g. SESF and APB. This finding provides a new insight how to use Ti content reasonably in superalloy design.

The surface morphology of the developing mammalian brain is crucial for understanding brain function and dysfunction. Computational modeling offers valuable insights into the underlying mechanisms for early brain folding. Recent findings indicate significant regional variations in brain tissue growth, while the role of these variations in cortical development remains unclear. In this study, we unprecedently explored how regional cortical growth affects brain folding patterns using computational simulation. We first developed growth models for typical cortical regions using machine learning (ML)-assisted symbolic regression, based on longitudinal real surface expansion and cortical thickness data from prenatal and infant brains derived from over 1,000 MRI scans of 735 pediatric subjects with ages ranging from 29 post-menstrual weeks to 24 months. These models were subsequently integrated into computational software to simulate cortical development with anatomically realistic geometric models. We comprehensively quantified the resulting folding patterns using multiple metrics such as mean curvature, sulcal depth, and gyrification index. Our results demonstrate that regional growth models generate complex brain folding patterns that more closely match actual brains structures, both quantitatively and qualitatively, compared to conventional uniform growth models. Growth magnitude plays a dominant role in shaping folding patterns, while growth trajectory has a minor influence. Moreover, multi-region models better capture the intricacies of brain folding than single-region models. Our results underscore the necessity and importance of incorporating regional growth heterogeneity into brain folding simulations, which could enhance early diagnosis and treatment of cortical malformations and neurodevelopmental disorders such as cerebral palsy and autism., Comment: 43 pages, 16 figures

Accurately estimating data density is crucial for making informed decisions and modeling in various fields. This paper presents a novel nonparametric density estimation procedure that utilizes bivariate penalized spline smoothing over triangulation for data scattered over irregular spatial domains. The approach is likelihood-based with a regularization term that addresses the roughness of the logarithm of density based on a second-order differential operator. The proposed method offers greater efficiency and flexibility in estimating density over complex domains and has been theoretically supported by establishing the asymptotic convergence rate under mild natural conditions. Through extensive simulation studies and a real-world application that analyzes motor vehicle theft data from Portland City, Oregon, we demonstrate the advantages of the proposed method over existing techniques detailed in the literature.

The conventional approach to the fronthaul design for cell-free massive MIMO system follows the compress-and-precode (CP) paradigm. Accordingly, encoded bits and precoding coefficients are shared by the distributed unit (DU) on the fronthaul links, and precoding takes place at the radio units (RUs). Previous theoretical work has shown that CP can be potentially improved by a significant margin by precode-and-compress (PC) methods, in which all baseband processing is carried out at the DU, which compresses the precoded signals for transmission on the fronthaul links. The theoretical performance gain of PC methods are particularly pronounced when the DU implements multivariate quantization (MQ), applying joint quantization across the signals for all the RUs. However, existing solutions for MQ are characterized by a computational complexity that grows exponentially with the sum-fronthaul capacity from the DU to all RUs. This work sets out to design scalable MQ strategies for PC-based cell-free massive MIMO systems. For the low-fronthaul capacity regime, we present alpha-parallel MQ (alpha-PMQ), whose complexity is exponential only in the fronthaul capacity towards an individual RU, while performing close to full MQ. alpha-PMQ tailors MQ to the topology of the network by allowing for parallel local quantization steps for RUs that do not interfere too much with each other. For the high-fronthaul capacity regime, we then introduce neural MQ, which replaces the exhaustive search in MQ with gradient-based updates for a neural-network-based decoder, attaining a complexity that grows linearly with the sum-fronthaul capacity. Numerical results demonstrate that the proposed scalable MQ strategies outperform CP for both the low and high-fronthaul capacity regimes at the cost of increased computational complexity at the DU (but not at the RUs)., Comment: submitted for a journal publication

Let C be an extriangulated category. We prove that two quotient categories of extriangu?lated categories induced by selforthogonal subcategories are equivalent to module categories by restriction of two functors E and Hom, respectively. Moreover, if the selforthogonal sub?category is contravariantly finite, then one of the two quotient categories is abelian. This result can be regarded as a generalization of Demonet-Liu and Zhou-Zhu., Comment: 16 Pages

Cross-domain recommendation (CDR) aims to address the data-sparsity problem by transferring knowledge across domains. Existing CDR methods generally assume that the user-item interaction data is shareable between domains, which leads to privacy leakage. Recently, some privacy-preserving CDR (PPCDR) models have been proposed to solve this problem. However, they primarily transfer simple representations learned only from user-item interaction histories, overlooking other useful side information, leading to inaccurate user preferences. Additionally, they transfer differentially private user-item interaction matrices or embeddings across domains to protect privacy. However, these methods offer limited privacy protection, as attackers may exploit external information to infer the original data. To address these challenges, we propose a novel Federated User Preference Modeling (FUPM) framework. In FUPM, first, a novel comprehensive preference exploration module is proposed to learn users' comprehensive preferences from both interaction data and additional data including review texts and potentially positive items. Next, a private preference transfer module is designed to first learn differentially private local and global prototypes, and then privately transfer the global prototypes using a federated learning strategy. These prototypes are generalized representations of user groups, making it difficult for attackers to infer individual information. Extensive experiments on four CDR tasks conducted on the Amazon and Douban datasets validate the superiority of FUPM over SOTA baselines. Code is available at https://github.com/Lili1013/FUPM.