Search

In the phase diagram U-Cd, only one compound has been identified so far─UCd11 (space group Pm3̅m). Since the discovery of this material, the physical properties of UCd11 have attracted a considerable amount of attention. In particular, its complex magnetic phase diagram─as a result of tuning with magnetic field or pressure─is not well-understood. From a chemical perspective, a range of lattice parameter values have been reported, suggesting a possibility of a considerable homogeneity range, i.e., UCd11-x. In this work, we perform a simultaneous study of crystallographic features coupled with measurements of physical properties. This work sheds light on the delicate relationship between the intrinsic crystal chemistry and magnetic properties of UCd11.

Sn3P8N16 combines the structural versatility of nitridophosphates and Sn within one compound. It was synthesized as dark gray powder in a high‐pressure high‐temperature reaction at 800 °C and 6 GPa from Sn3N4 and P3N5. The crystal structure was elucidated from single‐crystal diffraction data (space group C2/m (no. 12), a=12.9664(4), b=10.7886(4), c=4.8238(2) Å, β=109.624(1)°) and shows a 3D‐network of PN4 tetrahedra, incorporating Sn in oxidation states +II and +IV. The Sn cations are located within eight‐membered rings of vertex‐sharing PN4 tetrahedra, stacked along the [001] direction. A combination of solid‐state nuclear magnetic resonance spectroscopy, 119Sn Mössbauer spectroscopy and density functional theory calculations was used to confirm the mixed oxidation of Sn. Temperature‐dependent powder X‐ray diffraction measurements reveal a low thermal expansion of 3.6 ppm/K up to 750 °C, beyond which Sn3P8N16 starts to decompose. [ABSTRACT FROM AUTHOR]

Although beryllium and its compounds show outstanding properties, owing to its toxic potential and extreme reaction conditions the chemistry of Be under high‐pressure conditions has only been investigated sparsely. Herein, we report on the highly condensed wurtzite‐type Be2PN3, which was synthesized from Be3N2 and P3N5 in a high‐pressure high‐temperature approach at 9 GPa and 1500 °C. It is the missing member in the row of formula type M2PN3 (M = Mg, Zn). The structure was elucidated by powder X‐ray diffraction (PXRD), revealing that Be2PN3 is a double nitride, rather than a nitridophosphate. The structural model was further corroborated by 9Be and 31P solid‐state nuclear magnetic resonance (NMR) spectroscopy. We present 9Be NMR data for tetrahedral nitride coordination for the first time. Infrared and energy‐dispersive X‐ray spectroscopy (FTIR and EDX), as well as temperature dependent PXRD complement the analytical characterization. Density functional theory (DFT) calculations reveal super‐incompressible behavior and the remarkable hardness of this low‐density material. The formation of Be2PN3 through a high‐pressure high‐temperature approach expands the synthetic access to Be‐containing compounds and may open access to various multinary beryllium nitrides. [ABSTRACT FROM AUTHOR]

Although beryllium and its compounds show outstanding properties, owing to its toxic potential and extreme reaction conditions the chemistry of Be under high‐pressure conditions has only been investigated sparsely. Herein, we report on the highly condensed wurtzite‐type Be2PN3, which was synthesized from Be3N2 and P3N5 in a high‐pressure high‐temperature approach at 9 GPa and 1500 °C. It is the missing member in the row of formula type M2PN3 (M = Mg, Zn). The structure was elucidated by powder X‐ray diffraction (PXRD), revealing that Be2PN3 is a double nitride, rather than a nitridophosphate. The structural model was further corroborated by 9Be and 31P solid‐state nuclear magnetic resonance (NMR) spectroscopy. We present 9Be NMR data for tetrahedral nitride coordination for the first time. Infrared and energy‐dispersive X‐ray spectroscopy (FTIR and EDX), as well as temperature dependent PXRD complement the analytical characterization. Density functional theory (DFT) calculations reveal super‐incompressible behavior and the remarkable hardness of this low‐density material. The formation of Be2PN3 through a high‐pressure high‐temperature approach expands the synthetic access to Be‐containing compounds and may open access to various multinary beryllium nitrides. [ABSTRACT FROM AUTHOR]

Tetrahedron‐based nitrides offer a wide range of properties and applications. Highly condensed nitridophosphates are examples of nitrides that exhibit fascinating luminescence properties when doped with Eu2+, making them appealing for industrial applications. Here, we present the first nitridomagnesophosphate solid solution series Ba3−xSrx[Mg2P10N20] : Eu2+ (x=0–3), synthesized by a high‐pressure high‐temperature approach using the multianvil technique (3 GPa, 1400 °C). Starting from the binary nitrides P3N5 and Mg3N2 and the respective alkaline earth azides, we incorporate Mg into the P/N framework to increase the degree of condensation κ to 0.6, the highest observed value for alkaline earth nitridophosphates. The crystal structure was elucidated by single‐crystal X‐ray diffraction, powder X‐ray diffraction, energy‐dispersive X‐ray spectroscopy (EDX), and solid‐state NMR. DFT calculations were performed on the title compounds and other related highly condensed nitridophosphates to investigate the influence of Mg in the P/N network. Eu2+‐doped samples of the solid solution series show a tunable narrow‐band emission from cyan to green (492–515 nm), which is attributed to the preferred doping of a single crystallographic site. Experimental confirmation of this assumption was provided by overdoping experiments and STEM‐HAADF studies on the series as well on the stoichiometric compound Ba2Eu[Mg2P10N20] with additional atomic resolution energy‐dispersive X‐ray spectroscopy (EDX) mapping. [ABSTRACT FROM AUTHOR]

Nitridophosphates, with their primary structural motif of isolated or condensed PN4 tetrahedra, meet many requirements for high performance materials. Their properties are associated with their structural diversity, which is mainly limited by this specific building block. Herein, we present the alkaline earth metal nitridophosphate oxide Ba3[PN3]O featuring a trigonal planar [PN3]4− anion. Ba3[PN3]O was obtained using a hot isostatic press by medium‐pressure high‐temperature synthesis (MP/HT) at 200 MPa and 880 °C. The crystal structure was solved and refined from single‐crystal X‐ray diffraction data in space group R 3‾ ${\bar 3}$ c (no. 167) and confirmed by SEM‐EDX, magic angle spinning (MAS) NMR, vibrational spectroscopy (Raman, IR) and low‐cost crystallographic calculations (LCC). MP/HT synthesis reveals great potential by extending the structural chemistry of P to include trigonal planar [PN3]4− motifs. [ABSTRACT FROM AUTHOR]

Sn3P8N16 combines the structural versatility of nitridophosphates and Sn within one compound. It was synthesized as dark gray powder in a high‐pressure high‐temperature reaction at 800 °C and 6 GPa from Sn3N4 and P3N5. The crystal structure was elucidated from single‐crystal diffraction data (space group C2/m (no. 12), a=12.9664(4), b=10.7886(4), c=4.8238(2) Å, β=109.624(1)°) and shows a 3D‐network of PN4 tetrahedra, incorporating Sn in oxidation states +II and +IV. The Sn cations are located within eight‐membered rings of vertex‐sharing PN4 tetrahedra, stacked along the [001] direction. A combination of solid‐state nuclear magnetic resonance spectroscopy, 119Sn Mössbauer spectroscopy and density functional theory calculations was used to confirm the mixed oxidation of Sn. Temperature‐dependent powder X‐ray diffraction measurements reveal a low thermal expansion of 3.6 ppm/K up to 750 °C, beyond which Sn3P8N16 starts to decompose. [ABSTRACT FROM AUTHOR]

Although beryllium and its compounds show outstanding properties, owing to its toxic potential and extreme reaction conditions the chemistry of Be under high‐pressure conditions has only been investigated sparsely. Herein, we report on the highly condensed wurtzite‐type Be2PN3, which was synthesized from Be3N2 and P3N5 in a high‐pressure high‐temperature approach at 9 GPa and 1500 °C. It is the missing member in the row of formula type M2PN3 (M = Mg, Zn). The structure was elucidated by powder X‐ray diffraction (PXRD), revealing that Be2PN3 is a double nitride, rather than a nitridophosphate. The structural model was further corroborated by 9Be and 31P solid‐state nuclear magnetic resonance (NMR) spectroscopy. We present 9Be NMR data for tetrahedral nitride coordination for the first time. Infrared and energy‐dispersive X‐ray spectroscopy (FTIR and EDX), as well as temperature dependent PXRD complement the analytical characterization. Density functional theory (DFT) calculations reveal super‐incompressible behavior and the remarkable hardness of this low‐density material. The formation of Be2PN3 through a high‐pressure high‐temperature approach expands the synthetic access to Be‐containing compounds and may open access to various multinary beryllium nitrides. [ABSTRACT FROM AUTHOR]

Although beryllium and its compounds show outstanding properties, owing to its toxic potential and extreme reaction conditions the chemistry of Be under high‐pressure conditions has only been investigated sparsely. Herein, we report on the highly condensed wurtzite‐type Be2PN3, which was synthesized from Be3N2 and P3N5 in a high‐pressure high‐temperature approach at 9 GPa and 1500 °C. It is the missing member in the row of formula type M2PN3 (M = Mg, Zn). The structure was elucidated by powder X‐ray diffraction (PXRD), revealing that Be2PN3 is a double nitride, rather than a nitridophosphate. The structural model was further corroborated by 9Be and 31P solid‐state nuclear magnetic resonance (NMR) spectroscopy. We present 9Be NMR data for tetrahedral nitride coordination for the first time. Infrared and energy‐dispersive X‐ray spectroscopy (FTIR and EDX), as well as temperature dependent PXRD complement the analytical characterization. Density functional theory (DFT) calculations reveal super‐incompressible behavior and the remarkable hardness of this low‐density material. The formation of Be2PN3 through a high‐pressure high‐temperature approach expands the synthetic access to Be‐containing compounds and may open access to various multinary beryllium nitrides. [ABSTRACT FROM AUTHOR]

Ammeline is a simple, readily available, molecular compound, which has been known for nearly 200 years. Despite that, no proper structural characterization of ammeline has been conducted so far. For this reason, the prevalent tautomeric form of ammeline in the solid remained unknown to this date. In the course of this study, its crystal structure was finally established by single-crystal X-ray diffraction. In this structure, ammeline is exclusively found as its 4,6-diamino-1,3,5-triazin-2(1H)-one tautomer and adopts layered structure with an exceptionally high hydrogen bond density. Ammeline shows an interesting amphoteric behavior. Therefore, the synthesis and structural characterization of some of its salts were carried out to investigate the influence of the protonation degree on its molecular structure. In particular, the crystal structure of silver ammelinate monohydrate was solved as the first reported structure containing deprotonated ammeline. Moreover, the crystal structures of three different modifications of ammelinium perchlorate were elucidated and the transformation conditions between them were studied. Lastly, the crystal structure of ammelinediium diperchlorate monohydrate, containing unprecedented doubly protonated ammeline, was determined. The products' thermal behavior was studied by differential thermal analysis and thermogravimetric analysis. The perchlorate salts were additionally examined for their potential as insensitive high-energy-density materials., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

We report on the synthesis, crystal, and electronic structure, as well as the magnetic, and electric properties of the phosphorus-containing tantalum nitride P1-xTa8+xN13 (x = 0.1-0.15). A high-pressure high-temperature reaction (8 GPa, 1400 °C) of Ta3N5 and P3N5 with NH4F as a mineralizing agent yields the compound in the form of black, rod-shaped crystals. Single-crystal X-ray structure elucidation (space group C2/m (no. 12), a = 16.202(3), b = 2.9155(4), c = 11.089(2) Å, β = 126.698(7)°, Z = 2) shows a network of face- and edge-sharing Ta-centered polyhedra that contains small vacant channels and  PN6 octahedra strands. Atomic resolution transmission electron microscopy reveals an unusual P/Ta disorder. Mixed-valent tantalum atoms exhibit interatomic distances similar to those in metallic tantalum, however, the electrical resistivity is quite high in the order of 10‑1 Ω cm. The density of states and the electron localization function indicate localized electrons in both covalent and ionic bonds between P/Ta and N atoms, combined with less localized electrons that do not contribute to interatomic bonds., (© 2024 Wiley‐VCH GmbH.)

Nitridophosphates are in the focus of current research interest due to their structural versatility and properties, such as ion conductivity, ultra-incompressibility and luminescent properties when doped with suitable activator ions. Multinary representatives often require thorough investigation due to the competition with the thermodynamically more stable binary and ternary compounds. Another point of concern is the synthetic control of structural details, which is usually limited by conventional bottom-up syntheses. In this study, we report on the synthesis and characterization of the quaternary nitridophosphate CaLi2PN3. Various synthesis protocols were used for the preparation of CaLi2PN3, including the novel nitridophosphate double salt approach. The crystal structure was solved and refined from single-crystal X-ray diffraction data and confirmed by Rietveld refinement, solid-state NMR spectroscopy, EDX measurements and low-cost crystallographic calculations. The experimental results were corroborated by DFT calculations, which revealed the electronic band structure. Formation energy calculations allowed conclusions to be drawn about the stability in comparison to the initial ternary nitridophosphates. The synthesis of CaLi2PN3 exemplifies the enormous potential of medium-pressure syntheses in the field of nitridophosphate research. Furthermore, the presented new synthesis route allows a certain degree of structural control, which is a promising addition to previous synthesis strategies in nitridophosphate chemistry., (© 2024 Wiley‐VCH GmbH.)

Sn 3 P 8 N 16 combines the structural versatility of nitridophosphates and Sn within one compound. It was synthesized as dark gray powder in a high-pressure high-temperature reaction at 800 °C and 6 GPa from Sn 3 N 4 and P 3 N 5 . The crystal structure was elucidated from single-crystal diffraction data (space group C2/m (no. 12), a=12.9664(4), b=10.7886(4), c=4.8238(2) Å, β=109.624(1)°) and shows a 3D-network of PN 4 tetrahedra, incorporating Sn in oxidation states +II and +IV. The Sn cations are located within eight-membered rings of vertex-sharing PN 4 tetrahedra, stacked along the [001] direction. A combination of solid-state nuclear magnetic resonance spectroscopy, 119 Sn Mössbauer spectroscopy and density functional theory calculations was used to confirm the mixed oxidation of Sn. Temperature-dependent powder X-ray diffraction measurements reveal a low thermal expansion of 3.6 ppm/K up to 750 °C, beyond which Sn 3 P 8 N 16 starts to decompose., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The research for wurtzite-type ternary nitride semiconductors containing earth abundant elements with a stoichiometry of 1:1:2 was focused on metals like Mg or Zn, so far. The vast majority of these Grimm-Sommerfeld analogous compounds crystallize in the β-NaFeO2 structure, although a second arrangement in space group Pmc21 is predicted to be a viable alternative. Despite extensive theoretical and experimental studies, this structure has so far remained undiscovered. Herein, we report on BeGeN2 in a Pmc21 structure, synthesized from Be3N2 and Ge3N4 using a high-pressure high-temperature approach at 6 GPa and 800 °C. The compound was characterized by powder X-ray diffraction (PXRD), solid state nuclear magnetic resonance (NMR), Raman and energy dispersive X-ray (EDX) spectroscopy, temperature-dependent PXRD, second harmonic generation (SHG) and UV/VIS measurements and in addition also compared to its lighter homologue BeSiN2 in all mentioned analytic techniques. The synthesis and investigation of both the first beryllium germanium nitride and the first ternary wurtzite-type nitride crystallizing in space group Pmc21 open the door to a new field of research on wurtzite-type related structures., (© 2024 Wiley‐VCH GmbH.)

Tetrahedron-based nitrides offer a wide range of properties and applications. Highly condensed nitridophosphates are examples of nitrides that exhibit fascinating luminescence properties when doped with Eu 2+ , making them appealing for industrial applications. Here, we present the first nitridomagnesophosphate solid solution series Ba 3-x Sr x [Mg 2 P 10 N 20 ] : Eu 2+ (x=0-3), synthesized by a high-pressure high-temperature approach using the multianvil technique (3 GPa, 1400 °C). Starting from the binary nitrides P 3 N 5 and Mg 3 N 2 and the respective alkaline earth azides, we incorporate Mg into the P/N framework to increase the degree of condensation κ to 0.6, the highest observed value for alkaline earth nitridophosphates. The crystal structure was elucidated by single-crystal X-ray diffraction, powder X-ray diffraction, energy-dispersive X-ray spectroscopy (EDX), and solid-state NMR. DFT calculations were performed on the title compounds and other related highly condensed nitridophosphates to investigate the influence of Mg in the P/N network. Eu 2+ -doped samples of the solid solution series show a tunable narrow-band emission from cyan to green (492-515 nm), which is attributed to the preferred doping of a single crystallographic site. Experimental confirmation of this assumption was provided by overdoping experiments and STEM-HAADF studies on the series as well on the stoichiometric compound Ba 2 Eu[Mg 2 P 10 N 20 ] with additional atomic resolution energy-dispersive X-ray spectroscopy (EDX) mapping., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Nitridophosphates and nitridogermanates attract high interest in current research due to their structural versatility. Herein, the elastic properties of GeP 2 N 4 were investigated by single-crystal X-ray diffraction (XRD) upon compression to 44.4(1) GPa in a diamond anvil cell. Its isothermal bulk modulus was determined to be 82(6) GPa. At 44.4(1) GPa, laser heating resulted in the formation of multiple crystalline phases, one of which was identified as unprecedented germanium nitridophosphate GePN 3 . Its structure was elucidated from single-crystal XRD data ( C 2/ c (no. 15), a = 8.666(5), b = 8.076(4), c = 4.691(2) Å, β = 101.00(7)°) and is built up from layers of GeN 6 octahedra and PN 4 tetrahedra. The GeN 6 octahedra form double zigzag chains, while the PN 4 tetrahedra are found in single zigzag chains. GePN 3 can be recovered to ambient conditions with a unit cell volume increase of about 12%. It combines P V and Ge IV in a condensed nitridic network for the first time.

This study presents the synthesis and characterization of oxonitridosilicate phosphates Sr 3 SiP 3 O 2 N 7 , Sr 5 Si 2 P 4 ON 12 , and Sr 16 Si 9 P 9 O 7 N 33 as the first of their kind. These compounds were synthesized under high-temperature (1400 °C) and high-pressure (3 GPa) conditions. A unique structural feature is their common fundamental building unit, a vierer single chain of (Si, P)(O, N) 4 tetrahedra. All tetrahedra comprise substitutional disorder which is why we refer to it as the fundamental disorder unit (FDU). We classified four different FDU motifs, revealing systematic bonding patterns. Including literature known Sr 5 Si 2 P 6 N 16 , three of the four patterns were found in the presented compounds. Common techniques like single-crystal X-ray diffraction (SCXRD), elemental analyses, and 31 P nuclear magnetic resonance (NMR) spectroscopy were utilized for structural analysis. Additionally, low-cost crystallographic calculations (LCC) provided insights into the structure of Sr 16 Si 9 P 9 O 7 N 33 where NMR data were unavailable due to the lack of bulk samples. The optical properties of these compounds, when doped with Eu 2+ , were investigated using photoluminescence excitation (PLE), photoluminescence (PL) measurements, and density functional theory (DFT) calculations. Factors influencing the emission properties, including thermal quenching mechanisms, were discussed. This research reveals the new class of oxonitridosilicate phosphates with unique systematic structural features that offer potential for theoretical studies of luminescence and band gap tuning in insulators., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

We report on the synthesis of two-layered alkali germanates, Na 2 Ge 4 O 7 and K 2 Ge 4 O 7 . Both compounds were synthesized by using the ammonothermal method at 823 K and 100 MPa. Under these conditions, germanium is partially reduced from the +IV state to +II, forming mixed-valence compounds with the rarely observed [Ge (II) O 3 ] 4- unit. The valence state was verified by X-ray photoelectron spectroscopy (XPS) and was accompanied by theoretical calculations alongside vibrational spectroscopy and single-crystal X-ray structure determination. The compounds crystallize in the trigonal space groups (Na 2 Ge 4 O 7 : P 3̅ c 1 and K 2 Ge 4 O 7 : P 3̅ m 1) and feature layers of corner sharing [Ge (II) O 3 ] 4- and [Ge (IV) 2 O 7 ] 6- units forming [Ge (II) 2 Ge (IV) 2 O 7 ] 2- polyanions. These layers are separated by alkali metal ions. The compounds are colorless insulators with band gaps of 4.0-4.2 eV. According to the Robin-Day classification, both compounds can be described as class I materials, where the valences are trapped on specific sites.

Amalgams have played an important role in fundamental and applied solid-state chemistry and physics because of the diversity of crystallographic features and properties that they have to offer. Moreover, their peculiar chemical properties can sometimes give rise to unconventional superconducting or magnetic ground states. In the current work, we present an in-depth analysis of single crystals of YHg 3 and LuHg 3 (Mg 3 Cd structure type, space group P 6 3 / mmc ). Both compounds show superconductivity below T c = 1 ± 0.1 K (YHg 3 ) and T c = 1.2 ± 0.1 K (LuHg 3 ). Given the high air-sensitivity and toxicity of these compounds, this study was only possible using a number of dedicated experimental techniques., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)