Search

The follow-up timing observations were carried out for 24 pulsars discovered with the Five-hundred-meter Aperture Spherical radio Telescope (FAST) in Commensal Radio Astronomy FAST Survey. We report their phase-connected timing ephemeris, polarization pulse profiles, and Faraday rotation measurements. With their spin periods spanning from 2.995 ms to 4.34 s, their period derivatives were determined to spread between 7.996(8) × 10−21 and 9.83(3) × 10−15 s s−1, which imply that they have characteristic ages from 1.97 × 106 to 5.93 × 109 yr. It is inferred that PSRs J0211+4235 and J0518+2431 are beyond the ‘traditional death line’. PSR J0211+4235 is beyond the ‘death valley’. The death line model of Zhang et al. also cannot explain the radio presence of PSR J0211+4235. This suggests that radiation theory needs to be improved. Besides, ten of the 22 canonical pulsars show nulling phenomena. Moreover, PSR J1617+1123 exhibits variation of emission and J0540+4542 shows subpulse drifting. The DM of five pulsars is larger than the estimated by the YMW16 electron density model, which could suggest that electron density models need updates for higher Galactic latitude regions. PSRs J0447+2447 and J1928−0548 are isolated millisecond pulsars. With their flux densities spanning from 5(1)–553(106) μJy, some of these new pulsars found by FAST are distant, dim, and low-$\dot{E}$ ones and are suitable for testing pulsar emission theories.

We report the phase-connected timing ephemeris, polarization pulse profiles, Faraday rotation measurements, and Rotating-Vector-Model (RVM) fitting results of 12 millisecond pulsars (MSPs) discovered with the Five-hundred-meter Aperture Spherical radio Telescope (FAST) in the Commensal Radio Astronomy FAST survey (CRAFTS). The timing campaigns were carried out with FAST and Arecibo over 3 yr. 11 of the 12 pulsars are in neutron star–white dwarf binary systems, with orbital periods between 2.4 and 100 d. 10 of them have spin periods, companion masses, and orbital eccentricities that are consistent with the theoretical expectations for MSP–Helium white dwarf (He WD) systems. The last binary pulsar (PSR J1912−0952) has a significantly smaller spin frequency and a smaller companion mass, the latter could be caused by a low orbital inclination for the system. Its orbital period of 29 d is well within the range of orbital periods where some MSP–He WD systems have shown anomalous eccentricities, however, the eccentricity of PSR J1912−0952 is typical of what one finds for the remaining MSP–He WD systems.

The intensively intermittent use of antibiotics promotes the rapid evolution of tolerance, which may lead to resistance acquisition in the following evolutionary trajectory. In addition to directly exporting antibiotics as an instant resistance strategy, efflux pumps are overexpressed in tolerant strains.

Multistage space guide vane long shaft pump is widely used in many important fields because of its compact structure, convenient maintenance and simple pipeline. However, due to the complex flow phenomenon in its channel, the space guide vane long shaft pump has the problem of low performance. This paper takes xb4.3/240-300lc vertical long shaft fire pump as the research object. When the blade outlet width is the same, three schemes of impeller outlet inclination angle (0°, 15°and 25°) are designed, and CFX is used for numerical simulation to analyse the difference of internal flow field of each scheme. The results show that compared with the other two schemes, the scheme with an inclination angle of 15° has better performance in efficiency( η ) and head( H ). The pressure on the working surface of the blade is higher than that on the back of the blade, and the pressure near the front cover plate increases with the growth of the inclination angle. Under the condition of small flow, the velocity at the impeller outlet increases with the growth of inclination angle. Under the condition of large flow, the velocity at the impeller outlet decreases with the growth of inclination angle. Similarly, the turbulent kinetic energy shares the same pattern with the velocity at the impeller outlet. Under all working conditions, small vortex structure appears in impeller and guide vane. It is found that the scheme with impeller outlet inclination angle of 15° has smaller impeller vortex structure under standard working condition.

In this paper, a vertical long-shaft fire pump XBC18-178-240LC3 was taken as the research object to study the static characteristics of the pump rotor-shaft system under different shaft length connection. To analyse the influence of the length and number of the intermediate shaft section of the pump shaft on the deformation and equivalent stress of the shafting rotor, three shafting rotor models Z4(modified model), Z5(original model) and Z6(modified model) were designed, and then the static characteristics of them were analysed and compared under four operating conditions of 0.65Q d(0.65 times design flow),1.0Q d, 1.2Q d and 1.4Q d by numerical simulation. The results suggested that the changed rules of the three models' deformation and equivalent stress were basically the same. After the rated operating condition, the maximum deformation of the impeller of Z5 model was smaller than that of the Z4 and Z6 models. Under the four operating conditions, the maximum equivalent stress of the impeller of Z5 model was the smallest. This showed that the length and number of the intermediate shaft section affected the deformation and equivalent stress of the shaft rotor. Therefore, Z5 model was selected as the best rotor structure design scheme.

For multi-stage pumps, the change of the impeller stage spacing will have a greater impact on the dynamic characteristics of the shafting rotor. The paper took XBC18-178-240LC3 vertical long shaft fire pump as the research object, using ANSYS Workbench software to study the relationship between the critical speed of the shafting rotor and the different positions of the impellers. First, 9 shafting rotors (based Z4,Z5 and Z6 models) under the different positions of the impellers were established; and then the change law of the critical speed on 9 shafting rotors in the first 12 modes was studied. The results showed that different positions of the impeller on the shaft have a great impact on critical speed of the shafting rotor. With the increase of the distance between the impeller stages, the low-order critical speed (6th order and within) of the Z4 model shafting rotor decreases. However, the low-order critical speed (5th order and within) of the Z5 and Z6 model shafting rotors decreases with the increase of the distance between the impeller stages, and the high-order critical speed doesn’t satisfy this law. Considering static characteristics of the shafting rotor and actual engineering applications, the paper selected the Z5-stage spacing 800mm shafting rotor model as the best case, providing a theoretical support for the subsequent vertical long shaft fire pump design optimization.