Search

Abstract Photocatalysis through energy transfer has been investigated for the facilitation of [4 + 2] cycloaddition reactions. However, the high reactivity of radical species poses a challenging obstacle to achieving enantiocontrol with chiral catalysts, as no enantioselective examples have been reported thus far. Here, we present the development of catalytic asymmetric [4 + 2] dearomative photocycloaddition involving anthracene and its derivatives with alkenylazaarenes. This accomplishment is achieved by utilizing a cooperative photosensitizer and chiral Brønsted acid catalysis platform. Importantly, this process enables the activation of anthracene substrates through energy transfer from triplet DPZ, thereby initiating a precise and stereoselective sequential transformation. The significance of our work is highlighted by the synthesis of a diverse range of pharmaceutical valuable cycloadducts incorporating attractive azaarenes, all obtained with high yields, ees, and drs. The broad substrate scope is further underscored by successful construction of all-carbon quaternary stereocenters and diverse adjacent stereocenters.

Abstract An unprecedented enantioselective protonation reaction enabled by photoredox catalytic radical coupling is developed. Under cooperative dicynopyrazine‐derived chromophore (DPZ) as a photosensitizer and a chiral phosphoric acid catalyst, and Hantzsch ester as a sacrificial reductant, the transformations between α‐substituted enones and cyanoazaarenes or 2‐(chloromethyl)azaaren‐1‐iums can proceed a tandem reduction, radical coupling, and enantioselective protonation process efficiently. Two classes of pharmaceutically important enantioenriched azaarene variants, which contain a synthetically versatile ketone‐substituted tertiary carbon stereocenter at the β‐ or γ‐position of the azaarenes, are synthesized with high yields and ees.

The preparation of a novel composite carrier of polydopamine-modified carbon fiber/polyurethane foam (PDA-CF/PUF) was proposed to improve cell immobilization and the fermentation of xylitol, which is an important food sweetener and multifunctional food additive. Candida tropicalis was immobilized on the composite carrier by adsorption and covalent binding. The properties and immobilization mechanism of the composite carrier and its effect on immobilized cells were investigated. It showed that the modification of PDA enhanced the loading of CF on the PUF surface and the adhesion of cells on the composite carrier surface. Also, the biocompatibility of carriers to cells was improved. In addition, the introduction of PDA increased the active groups on the surface of the carrier, enhanced the hydrophilicity, promoted the cells immobilization, and increased the xylitol yield. It was also found that expression of the related gene XYL1 in cells was significantly increased after the immobilization of the PDA-CF/PUF composite carrier during the fermentation. The PDA-CF/PUF was an immobilized carrier with the excellent biocompatibility and immobilization performance, which has great development potential in the industrial production of xylitol.

Research on polymer matrix composites with excellent tribological properties has received increasing attention in recent years. In this study, antigorite and wollastonite mineral dual-phase-reinforced polytetrafluoroethylene (PTFE) matrix composites were prepared by filling PTFE with mineral powders using ball-milling, cold-pressing, and pressureless sintering methods. The phase structure, microstructure, chemical composition, Shore hardness, and tribological behavior of the composites rubbed against steel balls under dry friction conditions were investigated. The results show that the composites have a dense structure and uniform distribution of mineral phases, with a Shore hardness of 62–68.8, an increase of 18.7–23.7% compared to pure PTFE. Compared with the addition of mono antigorite or wollastonite, the composites prepared by simultaneously filling the two minerals exhibited excellent tribological properties. The average friction coefficient and wear volume of the (10Atg + 20Wl)/PTFE composites were reduced by 44.2% and 71.4%, respectively, compared to those of pure PTFE. A dense and continuous tribofilm composed mainly of SiO2, MgSiO3, Mg2SiO4, MgO, CaO, CaMg(SiO3)2, and CaF2 was formed on the worn surfaces of both the dual-phase-reinforced PTFE matrix composites and counterpart steel balls during the friction process. The reduction in friction and wear is attributed to the reinforcement effect of the minerals on the PTFE matrix as well as the complex physical and chemical reactions at the friction interface stimulated by the synergistic effects between the two minerals. The addition of wollastonite reduced the phase transition temperature of antigorite, promoting more tribochemical reaction products with good abrasion resistance and friction-reducing properties, which contributed to the excellent tribological behavior of the composites.

The instability of perilous rock is mostly manifested as sudden collapse and failure without obvious displacement characteristics. Therefore, it is difficult to achieve the purpose of monitoring and early warning by conventional displacement monitoring. But the existing stability monitoring indicators are mostly deformation, stress, and strain. There is a problem that the stability evaluation parameters are inconsistent with the monitoring parameters. Taking sliding-type perilous rock as the research object, the structural plane is assumed to be homogeneous and isotropic, and linear elastic deformation in the amplitude range. Based on the dynamic theory and limit equilibrium model, the quantitative relationship model can be established involving safety factors, natural vibration frequency, structural surface bonding area, elastic modulus, and mass. The remote laser vibrometer is used to monitor the natural vibration frequency of the sliding-type perilous rock on the slope of the Huangzangsi Hydrojunction, and the stability evaluation of the perilous rock is achieved based on the quantitative relationship model between the safety factor and the natural vibration frequency. In this way, the frequency of slipping perilous rock stability evaluation and safety factor can be monitored. The results are basically the same with the safety factor calculated by the limit equilibrium method, indicating that the method is correct and feasible. The research has high theoretical significance and practical value for the safety monitoring and advanced warning of sliding perilous rock.

Rock block tilting is one of the most common types of dangerous rock block failures with no clear indicator of displacement prior to failure. Existing stability evaluation methods remain limited in their ability to constrain the non-penetrating section area, which is closely related to rock stability, and stability evaluations are therefore associated with large uncertainties. The dynamic characteristic parameters of toppling dangerous rock are closely related to structural plane strength. Under vibration loading, rainfall, and/or excavation unloading conditions, the structural plane becomes damaged and the dynamic characteristic parameters change. In this study, we present a dynamic characteristic model of rock tilting and identify the quantitative and qualitative relationship between dynamic characteristic parameters and the bonded area of the structural plane. The model accuracy is verified by experiments. The experimental results show that the damping ratio decreases linearly with structural plane damage, whereas the maximum vibration speed and particle trajectory increases nonlinearly and the natural vibration frequency decreases nonlinearly. The dynamic characteristic model and experimental results can be used to evaluate the degree of structural surface damage of toppling dangerous rock.

In this work, we propose a novel dual optical frequency comb (DOFC) generation scheme based on dual cascaded difference frequency generation (DCDFG). Feasible designs are introduced that enable the two sets of cascaded optical waves, initially generated by DCDFG in an aperiodically periodically poled lithium niobate (APPLN) crystal with a pump wave and two signal waves, then transferred to high-order Stokes waves by oscillations of cascaded Stokes waves and the optimization of phase mismatching of each-order DCDFG; finally, a DOFC was constructed. We demonstrate a high-performance DOFC with characteristics of high repetition frequency difference, tunable repetition frequency difference, high flatness, and a tunable spectral distribution range by providing a theoretical framework. We argue that the scheme proposed in this work is promising for achieving a high-quality DOFC.