Search

Abstract Alkaline water electrolysers are ideal for gigawatt-scale hydrogen production due to the usage of non-precious metal and low-cost raw materials. However, their performances are modest with the separated electrode and diaphragm structure which can date back to more than 100 years ago. Here we report a catalyst-coated diaphragm assembly to improve the performance of alkaline water electrolysers. The transport resistance of OH- ions is reduced and the electrochemical surface area of catalysts is enlarged by more than forty fold, representing more than 40% increase in hydrogen production rate or as much as 16% reduction in energy consumption. The electrolyser with our catalyst-coated diaphragm assembly delivers current densities as high as 1 A cm−2 at 1.8 V or 2 A cm−2 at 2 V and shows good stability after more than 1000 hours of operation. Therefore, the catalyst-coated diaphragm assembly route is promising for the development of high-performance and efficient alkaline water electrolysers.

Abstract Background Interfacial heterogeneity is widely explored to reveal molecular mechanisms of force-mediated pathways due to biased tension. However, the influence of cell density,, curvature, and interfacial heterogeneity on underlying pathways of mechanotransduction is obscure. Methods Polydimethylsiloxane (PDMS)-based stencils were micropatterned to prepare the micropores for cell culture. The colonies of human mesenchymal stem cells (hMSCs) were formed by controlling cell seeding density to investigate the influences of cell density, curvature and heterogeneity on mechanotransduction. Immunofluorescent staining of integrin, vinculin, and talin-1 was conducted to evaluate adhesion-related expression levels. Then, immunofluorescent staining of actin, actinin, and myosin was performed to detect cytoskeleton distribution, especially at the periphery. Nuclear force-sensing mechanotransduction was explained by yes-associated protein (YAP) and laminA/C analysis. Results The micropatterned colony of hMSCs demonstrated the coincident characters with engineered micropores of microstencils. The cell colony obviously developed the heterogeneous morphogenesis. Heterogeneous focal adhesion guided the development of actin, actinin, and myosin together to regulate cellular contractility and movement by integrin, vinculin, and talin-1. Cytoskeletal staining showed that actin, actinin, and myosin fibers were reorganized at the periphery of microstencils. YAP nuclear translocation and laminA/C nuclear remodeling were enhanced at the periphery by the regulation of heterogeneous focal adhesion (FA) and cytoskeleton arrangement. Conclusions The characters of the engineered clustering colony showed similar results with prepared microstencils, and colony curvature was also well adjusted to establish heterogeneous balance at the periphery of cell colony. The mechanism of curvature, spreading, and elongation was also investigated to disclose the compliance of FA and cytoskeleton along with curvature microarrays for increased nuclear force-sensing mechanotransduction. The results may provide helpful information for understanding interfacial heterogeneity and nuclear mechanotransduction of stem cells.

Abstract Biochips are widely applied to manipulate the geometrical morphology of stem cells in recent years. Patterned antenna-like pseudopodia are also probed to explore the influence of pseudopodia formation on gene delivery and expression on biochips. However, how the antenna-like pseudopodia affect gene transfection is unsettled and the underlying trafficking mechanism of exogenous genes in engineered single cells is not announced. Therefore, the engineered microarray biochips were conceptualized and prepared by the synthesized photointelligent biopolymer to precisely manage geometric topological structures (cell size and antenna-like protrusion) of stem cells on biochips. The cytoskeleton could be regulated in engineered cells and large cells with more antennas assembled well-organized actin filaments to affect cell tension distribution. The stiffness and adhesion force were measured by atomic force microscope to reveal cell nanomechanics on microarray biochips. Cytoskeleton-mediated nanomechanics could be adjusted by actin filaments. Gene transfection efficiency was enhanced with increasing cell nanomechanics, which was also confirmed by the evaluation of cell internalization capacity of nanoparticles and DNA synthesis ability. This work will provide a new strategy to study functional biomaterials, microarray chips and internal mechanism of gene transfection in patterned stem cells on biochips. Graphical abstract

Research on solvent effects is an important and long-standing topic, but there still is some room, especially for the special solvent effect of fluoroalcohols. In this work, we investigated the stability of phenoxyl radical in monohydric alcohol solvents through in-situ electron paramagnetic resonance detections. The decay behavior of phenoxyl radical showed a reasonable relationship with the mesoscopic structure of alcohols, characterized by small- and wide-angle X-ray scattering. Moreover, the distinct solvent effects of fluoroalcohols were emphasized, and the significant influence of van der Waals distance in the solvents was suggested. Overall, the stability of phenoxyl radical in alcohols was quantified and correlated with the solvent structures. We believe that the established method for stability study on radicals will encourage solvent effect studies on various organic reactions, and the proposed solvent effects in fluoroalcohols may inspire the development of green solvents in both industrial conversions and organic synthesis.

H10 subtype avian influenza viruses (AIV) have been circulating in China for 40 years. H10 AIVs in China have expanded their host range from wild birds to domestic poultry and mammals, even human. Most of the H10 subtype AIVs reported in China were isolate from the southeast part. We isolated an H10N3 AIV, A/Chicken/Liaoning/SY1080/2021 (SY1080), from live poultry market (LPM) in Liaoning Province of the Northeast China. SY1080 replicated efficiently in mice lungs and nasal turbinates without prior adaptation. We systematically compared SY1080 with other H10 subtype isolates in China. Phylogenetic analysis showed that SY1080 and most of the H10 strains belonged to the Eurasian lineage. H10 AIVs in China have formed 63 genotypes. SY1080 as well as the H10N3 strains from human infections belonged to G60 genotype. H10Nx AIV acquired multiple mammalian adaptive and virulence related mutations during circulation and the recent reassortants derived internal genes from chicken H9N2 AIVs. The H10Nx subtypes AIVs posed potential threat to public health. These results suggested we should strengthen the surveillance and evaluation of H10 subtype strains.

The degree of processing is rarely considered an independent factor in the health effects of fruit juices and beverages (FJBs) consumption. In fact, the consumption of ultra-processed foods has been shown to pose health risks. In this study, we first integrated 4 systems used to classify the degree of food processing and then classified FJBs into three major categories, low (minimal), moderate and high. Second, we compared the differences in attitudes towards FJBs in dietary guidelines. Third, we integrated the results of existing epidemiological surveys, randomized controlled trials, and animal experiments to explore the health risks associated with consuming FJBs. Deepening the processing of FJBs has been found to lead to an increased risk of diseases. Dietary pattern, nutrients, addition agents and consumer preferences may be influential factors. Finally, we investigated whether there were any changes in the health benefits of 100% fruit juices produced by different processing methods. In conclusion, minimally/moderately processed 100% fruit juices provide more health benefits than highly processed fruit beverages. The results support the need to consider the extent of FJBs processing in future studies to adjust official nutritional recommendations for beverage consumption.

This article elucidates the concept of large model technology, summarizes the research status of large model technology both domestically and internationally, provides an overview of the application status of large models in vertical industries, outlines the challenges and issues confronted in applying large models in the oil and gas sector, and offers prospects for the application of large models in the oil and gas industry. The existing large models can be briefly divided into three categories: large language models, visual large models, and multimodal large models. The application of large models in the oil and gas industry is still in its infancy. Based on open-source large language models, some oil and gas enterprises have released large language model products using methods like fine-tuning and retrieval augmented generation. Scholars have attempted to develop scenario-specific models for oil and gas operations by using visual/multimodal foundation models. A few researchers have constructed pre-trained foundation models for seismic data processing and interpretation, as well as core analysis. The application of large models in the oil and gas industry faces challenges such as current data quantity and quality being difficult to support the training of large models, high research and development costs, and poor algorithm autonomy and control. The application of large models should be guided by the needs of oil and gas business, taking the application of large models as an opportunity to improve data lifecycle management, enhance data governance capabilities, promote the construction of computing power, strengthen the construction of “artificial intelligence + energy” composite teams, and boost the autonomy and control of large model technology.

Traditional ventilation duct systems for embankments in cold regions are limited in their ability to regulate ventilation, which restricts their cooling effectiveness on the subgrade. This study introduces a design method for an Intelligent Adjustment Ventilation Embankment (IAVE) system that dynamically adjusts the ventilation status within the duct based on variations in ground and air temperatures. Numerical simulations were performed to compare the cooling performance and differential settlement control of the Normal Ventilation Embankment (NVE), Temperature-Controlled Ventilation Embankment (TCVE), and IAVE systems. The results demonstrated that, compared to NVE and TCVE, the IAVE system achieved more precise temperature regulation, optimized the use of environmental cooling energy, and exhibited superior long-term cooling and differential settlement control. Among the three main factors influencing IAVE performance—ventilation duct burial spacing, burial depth, and airflow velocity—the burial spacing has the most significant impact on the Artificial Permafrost Table (APT). It not only enhances cooling during cold seasons but also effectively mitigates the re-warming of the subgrade during warm seasons. This research offers an efficient, low-carbon energy utilization structure and provides calculation results to improve the thermal stability of engineering projects in cold regions.

Background & Aims: HIV accelerates liver fibrosis attributable to multiple etiologies, including HCV, HBV, and steatotic liver disease. Evidence also suggests that HIV infection itself is associated with liver fibrogenesis. Recent studies have implicated Yes-associated protein 1 (YAP1) and the upstream lysophosphatidic acid (LPA)/PI3K/AKT pathway as critical regulators of hepatic fibrogenesis, and suggest a connection to HIV-related liver fibrosis. However, the relationship between YAP/PI3K/AKT pathway activation and HIV-related liver fibrosis remains uncertain. Methods: qPCR, western blot, immunofluorescence, and ELISA (replicates n ≥3) were performed in an unbiased humanized mouse model (NRG-hu HSC mice, n = 6), the precision cut liver slice ex vivo model, and both traditional in vitro models as well as a 3D spheroid system. Results: YAP target gene mRNA and protein levels (ANKRD, CTGF, CYR61) were upregulated across all models exposed to HIV. Humanized mice infected with HIV had significant increases in the percentage of YAP-positive nuclei (2.2-fold) and the percentage area of Sirius Red collagen staining (3.3-fold) compared to control mice. Serum concentrations of LPA were increased 5.8-fold in people living with HIV compared to healthy controls. Modulation of LPAR1, PI3K, and AKT by either inhibitors or small-interfering RNAs abrogated the fibrotic effects of HIV exposure and downregulated YAP target genes within cultured liver cells. Conclusions: The LPAR/PI3K/AKT axis is vital for the activation of YAP and hepatic fibrogenesis due to HIV infection. This novel mechanistic insight suggests new pharmacologic targets for treatment of liver fibrosis in people living with HIV. Impact and implications:: There are currently no FDA-approved treatments for cirrhosis, while liver disease is the second leading cause of mortality among people living with HIV after AIDS. Increased lysophosphatidic acid concentrations and AKT activation after HIV infection found in recent work suggest that the Hippo pathway may be a key regulator of HIV-related fibrogenesis. By linking lysophosphatidic acid signaling, YAP activation, and HIV-related fibrogenesis, this mechanism presents a target for future research into therapeutic interventions for not only HIV but also other liver diseases, e.g. metabolic dysfunction- or alcohol-associated liver disease.

Abstract Precision-cut liver slices (PCLS) are increasingly used as a model to investigate anti-fibrotic therapies. However, many studies use PCLS from healthy animals treated with pro-fibrotic stimuli in culture, which reflects only the early stages of fibrosis. The effects of different culture conditions on PCLS from cirrhotic animals has not been well characterized and there is no consensus on optimal methods. In this study, we report a method for the collection and culture of cirrhotic PCLS and compare the effect of common culture conditions on viability, function, and gene expression. Additionally, we compared three methods of RNA isolation and identified a protocol with high yield and purity. We observed significantly increased albumin production when cultured with insulin-transferrin-selenium and dexamethasone, and when incubated on a rocking platform. Culturing with insulin-transferrin-selenium and dexamethasone maintained gene expression closer to the levels in fresh slices. However, despite stable viability and function up to 4 days, we found significant changes in expression of key genes by day 2. Interestingly, we also observed that cirrhotic PCLS maintain viability in culture longer than slices from healthy animals. Due to the influence of matrix stiffness on fibrosis and hepatocellular function, it is important to evaluate prospective anti-fibrotic therapies in a platform that preserves tissue biomechanics. PCLS from cirrhotic animals represent a promising tool for the development of treatments for chronic liver disease.

Abstract Tissue regeneration technology has been rapidly developed and widely applied in tissue engineering and repair. Compared with traditional approaches like surgical treatment, the rising gene therapy is able to have a durable effect on tissue regeneration, such as impaired bone regeneration, articular cartilage repair and cancer-resected tissue repair. Gene therapy can also facilitate the production of in situ therapeutic factors, thus minimizing the diffusion or loss of gene complexes and enabling spatiotemporally controlled release of gene products for tissue regeneration. Among different gene delivery vectors and supportive gene-activated matrices, advanced gene/drug nanocarriers attract exceptional attraction due to their tunable physiochemical properties, as well as excellent adaptive performance in gene therapy for tissue regeneration, such as bone, cartilage, blood vessel, nerve and cancer-resected tissue repair. This paper reviews the recent advances on nonviral-mediated gene delivery systems with an emphasis on the important role of advanced nanocarriers in gene therapy and tissue regeneration.

BackgroundDue to the scarcity and high cost of MRI in resource-constrained regions, prompt diagnosis and treatment of rotator cuff tears remain problematic in these areas. Therefore, extensive research has been conducted to predict rotator cuff tears using simple and affordable anteroposterior radiographs. It remains unclear whether non-standard anteroposterior radiographs would have a notable impact on the preciseness of the diagnosis.MethodWe analyzed patients treated for shoulder pain at hospitals. These patients underwent shoulder joint MRI and standard anteroposterior radiographs, were categorized into those with rotator cuff tears and a control group. We assessed whether the radiographs were standard anteroposterior radiographs using classification criteria from previous studies. Three assessors independently measured the acromiohumeral interval, upwards migration index, acromion index, critical shoulder angle, and double-circle radius ratio in radiographic images. The intraclass correlation coefficient and receiver operating characteristic curves were used to assess measurement reliability and predictive capabilities of each predictive method for rotator cuff tears.ResultsThis study included 102 non-standard radiographs that met the research criteria for the measurement and analysis. The intragroup correlation coefficients for the acromiohumeral interval, upwards migration index, and double-circle radius ratio were above 0.7 (0.77, 0.71, 0.76), while those for the acromion index and critical shoulder angle exceeded 0.8 (0.86 and 0.87). In non-standard radiographs, the double-circle radius ratio reliably predicted rotator cuff tears (p 0.05). The areas under the receiver operating characteristic curves of the double-circle radius ratio, estimated by the three researchers for rotator cuff tears.ConclusionThis study found that non-standard radiographs significantly impaired the diagnostic performance of the acromiohumeral interval, upwards migration index, acromion index, and critical shoulder angle. Only the double-circle radius ratio maintained its predictive power (although this diminished capability may fall short of clinical relevance) and demonstrated high applicability. These findings indicate the need for researchers to prioritize the quality of radiographs and focus on reducing the sensitivity of the prediction method in relation to radiograph quality. The capability exhibited by the double-circle radius ratio warrants further investigation, to facilitate a simplified diagnosis of rotator cuff tears.

Abstract Copper‐catalyzed C─H oxygenation has drawn considerable attention in mechanistic studies. However, a comprehensive investigation combining radical pathways with a metal‐catalytic cycle is challenged by the intricate organic radicals and metallic intermediates. Herein, an online coupled EPR/UV–vis/near‐IR detecting method is developed to simultaneously monitor both reactive radical species and copper complex intermediates during the reaction. Focusing on copper‐catalyzed phenol oxygenation with cumene hydroperoxide, the short‐lived alkylperoxyl radical (EPR signal at g = 2.0143) as well as the unexpected square planar Cu(II)‐alkoxyl radical complex (near‐IR signal at 833 nm) are unveiled during the reaction, in addition to the observable phenoxyl radical in EPR, quinone product in UV–vis, and Cu(II) center in EPR. With a comprehensive picture of diverse intermediates evolving over the same timeline, a novel Cu(I)/Cu(II) proposed relay‐catalyzed sequential radical pathway. In this sequence, Cu(II) activates hydroperoxide through Cu(II)‐OOR into the alkylperoxide radical, while the reaction between Cu(I) and hydroperoxide leads to Cu(II)(•OR)OH with high H‐atom abstracting activity. These results provide a thorough understanding of the Cu(I)/Cu(II) relay catalysis for phenol oxygenation, setting the stage for mechanistic investigations into intricate radical reactions promoted by metallic complexes.

Objective: Previous studies have demonstrated synergistic antitumor effects of angiotensin system inhibition (ASI) combined with cisplatin therapy in pancreatic cancer. This study examines whether or not synergistic antitumor effects occur with combination ASI and cisplatin treatment in lung cancer, and whether or not ASI-induced changes in epithelial-mesenchymal transition play a role in the mechanism of this antitumor phenomenon. Methods: A set of lung cancer cell lines representing a spectrum of epithelial to mesenchymal phenotypes were identified and characterized. Response of epithelial-mesenchymal transition markers to losartan was characterized. Cell culture models of lung cancer were next treated with losartan, cisplatin, or combination of both. Markers of epithelial-mesenchymal transition or surrogates of other signaling pathways (AKT, Stat3, and programmed death-ligand), and cell viability were quantified. Findings were confirmed in both allogenic and syngeneic in vivo murine flank tumor models. Results: Losartan treatment significantly increased E-cadherin and reduced vimentin in human lung cancer cell lines. Combination treatment with losartan and cisplatin enhanced epithelial markers, reduced mesenchymal markers, inhibited promesenchymal signaling mediators, and reduced cell viability. Findings were confirmed in vivo in a murine flank tumor model with transition from mesenchymal to epithelial phenotype and reduced tumor size following combination losartan and cisplatin treatment. Conclusions: Combination losartan and cisplatin treatment attenuates the epithelial-mesenchymal transition pathway and enhances the cytotoxic effect of chemotherapy with in vitro and in vivo models of non–small cell lung cancer. This study suggests an important role for ASI therapy in the treatment of lung cancer.

Smart mining solutions currently suffer from inadequate big data support and insufficient AI applications. The main reason for these limitations is the absence of a comprehensive industrial internet cloud platform tailored for the coal industry, which restricts resource integration. This paper presents the development of an innovative platform designed to enhance safety, operational efficiency, and automation in fully mechanized coal mining in China. This platform integrates cloud edge computing, real-time data processing, and AI-driven analytics to improve decision-making and maintenance strategies. Several AI models have been developed for the proactive maintenance of comprehensive mining face equipment, including early warnings for periodic weighting and the detection of common faults such as those in the shearer, hydraulic support, and conveyor. The platform leverages large-scale knowledge graph models and Graph Retrieval-Augmented Generation (GraphRAG) technology to build structured knowledge graphs. This facilitates intelligent Q&A capabilities and precise fault diagnosis, thereby enhancing system responsiveness and improving the accuracy of fault resolution. The practical process of implementing such a platform primarily based on open-source components is summarized in this paper.

Starch is a major component of the human diet and has several hierarchies including granule, shell, blocklet, amylose and amylopectin, which can be used as the raw materials in food processing. In order to be applied in a suitable range, this involves the selection of separation methods and the accurate characterization of the structural properties of each starch hierarchy. Therefore, this paper analyzes the separation and characterization methods for each starch hierarchy, introduces their different applications, and thus provides some references for the development and utilization of starch resources.

Abstract Dopamine is high-value compound of pharmaceutical interest, but its industrial scale production mostly focuses on chemical synthesis, possessing environment pollution. Bio-manufacturing has caused much attention for its environmental characteristic. Resting cells were employed to as biocatalysts with extraordinary advantages like offering stable surroundings, the inherent presence of expensive cofactors. In this study, whole-cell bioconversion was employed to convert dopa to dopamine. To increase the titer and yield of dopamine production through whole-cell catalysis, three kinds of aromatic amino acid transport protein, AroP, PheP and TyrP, were selected to be co-expressed. The effects of the concentration of L-dopa, pyridoxal-5’- phosphate (PLP), reaction temperature and pH were characterized for improvement of bioconversion. Under optimal conditions, dopamine titer reached 1.44 g/L with molar yield of 46.3%, which is 6.62 times than that of initial conditions. The catalysis productivity of recombinant E. coli co-expressed L-dopa decarboxylase(DDC) and AroP was further enhanced by repeated cell recycling, which maintained over 50% of its initial ability with eight consecutive catalyses. This study was the first to successfully bioconversion of dopamine by whole-cell catalysis. This research provided reference for whole-cell catalysis which is hindered by cell membrane.

Abstract Background Considering the high reoperation rate in degenerative lumbar spondylolisthesis (DLS) patients undergoing lumbar surgeries and controversial results on the risk factors for the reoperation, we performed a systematic review and meta-analysis to explore the reoperation rate and risk factors for the reoperation in DLS patients undergoing lumbar surgeries. Methods Literature search was conducted from inception to October 28, 2022 in Pubmed, Embase, Cochrane Library, and Web of Science. Odds ratio (OR) was used as the effect index for the categorical data, and effect size was expressed as 95% confidence interval (CI). Heterogeneity test was performed for each outcome effect size, and subgroup analysis was performed based on study design, patients, surgery types, follow-up time, and quality of studies to explore the source of heterogeneity. Results of all outcomes were examined by sensitivity analysis. Publication bias was assessed using Begg test, and adjusted using trim-and-fill analysis. Results A total of 39 cohort studies (27 retrospective cohort studies and 12 prospective cohort studies) were finally included in this systematic review and meta-analysis. The overall results showed a 10% (95%CI: 8%-12%) of reoperation rate in DLS patients undergoing lumbar surgeries. In surgery types subgroup, the reoperation rate was 11% (95%CI: 9%-13%) for decompression, 10% (95%CI: 7%-12%) for fusion, and 9% (95%CI: 5%-13%) for decompression and fusion. An increased risk of reoperation was found in patients with obesity (OR = 1.91, 95%CI: 1.04–3.51), diabetes (OR = 2.01, 95%CI: 1.43–2.82), and smoking (OR = 1.51, 95%CI: 1.23–1.84). Conclusions We found a 10% of reoperation rate in DLS patients after lumbar surgeries. Obesity, diabetes, and smoking were risk factors for the reoperation.

Unsaturated fatty acids (UFAs) play a fundamental role in maintaining human health and serve as an important raw material for functional foods. However, UFAs are prone to oxidization during processing and storage, leading to deterioration. Microencapsulation of UFAs is an effective processing method to minimize oxidation and enhance its stability. In this paper, the physiological functions of UFAs and their applications in food, medicine, and other fields are summarized. The research progress of microencapsulation technology of UFAs is systematically reviewed, aiming to provide a theoretical basis and rationale for their applications in the food industry. Research has shown that the wall materials widely used were mainly proteins and carbohydrates, whereas their combination can overcome their disadvantages. Spray drying, freeze drying, molecular encapsulation, and coacervation method are most commonly used in the fabrication of microencapsulated UFAs. Using various wall materials and fabrication methods leads to very different encapsulation efficiency, which also greatly impacts the stability of UFAs during processing and storage. Hence, it is still necessary to select appropriate materials and methods according to the properties and functions of the food products. Microencapsulated UFAs exhibited slow-release properties and improved physiological functions. Therefore, it may have broad applications and excellent future development prospects in the food industry.

Background: Clear cell renal cell carcinoma (ccRCC) is corelated with tumor-associated material (TAM), coagulation system and adipocyte tissue, but the relationships between them have been inconsistent. Our study aimed to explore the cut-off intervals of variables that are non-linearly related to ccRCC pathological T stage for providing clues to understand these discrepancies, and to effectively preoperative risk stratification. Methods: This retrospective analysis included 218 ccRCC patients with a clear pathological T stage between January 1st, 2014, and November 30th, 2021. The patients were categorized into two cohorts based on their pathological T stage: low T stage (T1 and T2) and high T stage (T3 and T4). Abdominal and perirenal fat variables were measured based on preoperative CT images. Blood biochemical indexes from the last time before surgery were also collected. The generalized sum model was used to identify cut-off intervals for nonlinear variables. Results: In specific intervals, fibrinogen levels (FIB) (2.63–4.06 g/L) and platelet (PLT) counts (>200.34 × 109/L) were significantly positively correlated with T stage, while PLT counts (

ObjectiveTo explore the reliability and validity of gait parameters obtained from gait assessment system software employing a human posture estimation algorithm based on markerless videos of children walking in clinical practice.MethodsEighteen typical developmental (TD) children and ten children with developmental dysplasia of the hip (DDH) were recruited to walk along a designated sidewalk at a comfortable walking speed. A 3-dimensional gait analysis (3D GA) and a 2-dimensional markerless (2D ML) gait evaluation system were used to extract the gait kinematics parameters twice at an interval of 2 h.ResultsThe two measurements of the children's kinematic gait parameters revealed no significant differences (P > 0.05). Intra-class correlation coefficients (ICC) were generally high (ICC >0.7), showing moderate to good relative reliability. The standard error of measurement (SEM) values of all gait parameters measured by the two walks were 1.26°–2.91°. The system software had good to excellent validity compared to the 3D GA, with ICC values between 0.835 and 0.957 and SEM values of 0.87°–1.71° for the gait parameters measured by both methods. The Bland–Altman plot analysis indicated no significant systematic errors.ConclusionsThe feasibility of the markerless gait assessment method using the human posture estimation-based algorithm may provide reliable and valid gait analysis results for practical clinical applications.

Abstract Background Postoperative bone graft migration (PBGM) is a fairly rare spinal postoperative complication. Its occurrence after endoscopic surgery has rarely been reported in the literature so far. This is a case report of a 52-year-old male occurring PBGM into the thecal sac in the 8th days after an endoscopic lumbar interbody fusion (ELIF), which can make surgeons more minded with such serious rare complication after BGM. Case Presentation A 52-year-old male patient, underwent a L4-5 ELIF, presented with an acute radiculopathy on right leg and urinary incontinence in the 8th postoperative day. An emergency lumbar Computed Tomography(CT scan) and Magnetic Resonance Imaging (MRI) demonstrated bone graft migration into the thecal sac at the L4-5 level, and shifting down to the lower level. The revision surgery was performed at once successfully. Finally, the patient got well managed before discharge. Conclusion Supported by this case report, we believe that PBGM into the thecal sac is a rare but horrible complication of ELIF. However, too much volume of bone graft and its posterior placement are more prone to developing this complication. Finally, we are not sure that the outcome presented in this study will be repeated in future cases.

While the reduction of CO2 to specific products offers a valuable approach mitigating gas emissions, it is challenging to control the formation of crucial intermediates. Here, authors report a strategy to promote the formation of oxygen-bound intermediates and boost the methanol production.