Search

Iontronics combines ions as charge carriers with electronic-like operations, enabling unique information processing, chemical regulation, and enhanced bio-integrability. Standard simulation tools encounter difficulties in effectively modeling the behavior of integrated iontronic components, highlighting the need for specialized design and simulation approaches. This paper presents a design methodology for iontronic integrated circuits, inspired by well-established electronic design methodologies and made possible by the development of a compact model for the iontronic bipolar diode. Grounded in the diode's physical properties and observed behavior, this model provides a conceptual framework that could be applied to other iontronic components. It is implemented using standard VLSI (Very Large-Scale Integration) electronic design tools, enabling simulations that demonstrate diode-based iontronic circuit behaviors and laying the groundwork for the design and simulation of hybrid systems integrating electronic and iontronic circuits. The proposed iontronic circuit simulation approach enables the exploration of how component uniformity influences circuit behavior, as well as the impact of diode parameters and a deeper understanding of diode characteristics from a circuit perspective. These insights are expected to contribute to the development of more complex and efficient iontronic circuits, bringing us closer to practical and groundbreaking applications in the field., Comment: 23 pages, 6 figures

While previous studies indicated the mobility reversal of an electrically-powered metallo-dielectric Janus particle (JP) with increasing frequency, here we report an intriguing second mobility reversal observed in optoelectronically-driven JPs. In contrast to the commonly used setup with parallel ITO-coated glass substrates to induce a uniform electric field orthogonal to the velocity direction, this setup incorporates a thin photoconductive layer deposited on the bottom ITO-coated glass substrate. We have found that the reversal is associated with the asymmetry of the bottom substrate's photoconductivity, localized underneath the JP, resulting from the self-shading effect of the metallic hemisphere under top optical illumination. Numerous control tests, including optical illumination from the bottom, along with numerical simulations, support this hypothesized mechanism

Microrobots engineered from self-propelling active particles, extend the reach of robotic operations to submillimeter dimensions and are becoming increasingly relevant for various tasks, such as manipulation of micro/nanoscale cargo, particularly targeted drug delivery. However, achieving deep-tissue penetration and drug delivery remain a challenge. This work developed a novel biohybrid microrobot consisting of jellyfish stinging capsules, which act as natural nanoinjectors for efficient penetration and delivery, assembled onto an active Janus particle (JP). While microrobot transport and navigation was externally controlled by magnetic field-induced rolling, capsule loading onto the JP surface was controlled by electric field. Following precise navigation of the biohybrid microrobots to the vicinity of target tissues, the capsules were activated by a specific enzyme introduced to the solution, which then triggered tubule ejection and release of the preloaded molecules. Use of such microrobots for penetration of and delivery of the preloaded drug/toxin to targeted cancer spheroids and live Caenorhabditis elegans was demonstrated in-vitro. The findings offer insights for future development of bio-inspired microrobots capable of deep penetration and drug delivery. Future directions may involve encapsulation of various drugs within different capsule types for enhanced versatility. This study may also inspire in-vivo applications involving deep tissue drug delivery.

Here, we report on a new class active particles capable of dynamically programmable motion powered by electricity. We have implemented physical principles that separate the propulsion and steering mechanisms of active motion using optically activated, patterned, photoresponsive semiconductor coatings on intricate microstructures. Our engineered microswimmer robots employ an induced-charge electro-phoresis (ICEP) mechanism to achieve linear motion and optically modulated electrokinetic propulsion (OMEP) for steering. Optical modulation is achieved by manipulating the polarizability of patterned ZnO semiconductor coating through exposure to light with wavelengths above its bandgap, exploiting the semiconductor's photoconductive properties. Unlike previous methods that rely on changing the direction of optical illumination or spatially controlling narrow optical beams, our approach achieves optical steering under uniform ambient illumination conditions, thereby greatly reducing the complexity of the optical system. The decoupling of propulsion and steering allows for the programming of micromotor trajectories in both open and closed-loop control modes. We anticipate that our findings will pave the way for efficient optically gated control of the trajectory of photoresponsive active particles. Furthermore, they will enable the selective manipulation of specific subgroups of engineered active microparticles with various semiconducting coatings having different band gaps.

Self-propelling active particles are an exciting and interdisciplinary emerging area of research with projected biomedical and environmental applications. Due to their autonomous motion, control over these active particles that are free to travel along individual trajectories, is challenging. This work used optically patterned electrodes on a photoconductive substrate using a digital micromirror device (DMD) to dynamically control the region of movement of self-propelling particles (i.e. metallo-dielectric Janus particles (JPs)). This extends previous studies where only a passive micromotor was optoelectronically manipulated with a translocating optical pattern that illuminated the particle. In contrast, the current system used the optically patterned electrode merely to define the region within which the JPs moved autonomously. Interestingly, the JPs avoided crossing the optical region edge, which enables constraint of the area of motion and to dynamically shape the JP trajectory. Using the DMD system to simultaneously manipulate several JPs enabled to self-assemble the JPs into stable active structures (JPs ring) with precise control over the number of participating JPs and passive particles. Since the optoelectronic system is amenable to closed-loop operation using real-time image analysis, it enables exploitation of these active particles as active microrobots that can be operated in a programmable and parallelized manner

Electrically powered micro- and nanomotors are promising tools for in-vitro single-cell analysis. In particular, single cells can be trapped, transported and electroporated by a Janus particle (JP) using an externally applied electric field. However, while dielectrophoretic (DEP)-based cargo manipulation can be achieved at high-solution conductivity, electrical propulsion of these micromotors becomes ineffective at solution conductivities exceeding 0.3mS/cm. Here, we successfully extended JP cargo manipulation and transport capabilities to conductive near-physiological (<6mS/cm) solutions by combining magnetic field-based micromotor propulsion and navigation with DEP-based manipulation of various synthetic and biological cargos. Combination of a rotating magnetic field and electric field resulted in enhanced micromotor mobility and steering control through tuning of the electric field frequency. conditions are necessary. In addition, we demonstrated the micromotors ability of identifying apoptotic cell among viable and necrotic cells based their dielectrophoretic difference, thus, enabling to analyze the apoptotic status in the single cell samples for drug discovery, cell therapeutics and immunotherapy. We also demonstrated the ability to trap and transport live cells towards regions containing doxorubicin-loaded liposomes. This hybrid micromotor approach for label-free trapping, transporting and sensing of selected cells within conductive solutions, opens new opportunities in drug delivery and single cell analysis, where close-to-physiological media

The electro-rotation (EROT) and electro-orientation (EOR) behavior of metallodielectric (MD) spherical Janus particles (JP) are studied analytically and verified experimentally. This stands in contrast to previous either heuristic or numerically computed models of JP dipoles. First, we obtain frequency-dependent analytic expressions for the corresponding dipole terms for a JP composed of a dielectric and metallic hemispheres, by applying the standard (weak-field) electrokinetic model and using a Fourier-Legendre collocation method for solving two sets of linear equations. EROT and EOR spectra, describing the variation of the JP angular velocity on the forcing frequency of a rotating and non-rotating spatially uniform electric field, respectively, are explicitly determined and compared against experiments (different JP size and solution conductivity). A favorably good qualitative agreement between theory and experimental measurements was found.

This article presents the implementation of on-chip iontronic circuits via small-scale integration of multiple ionic logic gates made of bi-polar polyelectrolyte diodes. These ionic circuits are analogous to solid-state electronic circuits, with ions as the charge carriers instead of electrons/holes. We experimentally characterize the responses of a single fluidic diode made of a junction of oppositely charged polyelectrolytes (i.e., anion and cation exchange membranes), with a similar underlying mechanism as a solid-state p- and n-type junction. This served to carry out pre-designed logical computations in various architectures by integrating multiple diode-based logic gates, where the electrical signal between the integrated gates was transmitted entirely through ions. The findings shed light on the limitations affecting the number of logic gates that can be integrated, the degradation of the electrical signal, their transient response, and the design rules that can improve the performance of iontronic circuits.

Microfluidic channels with embedded ion permselective medium under the application of electric current are commonly used for electrokinetic processes as on-chip ion concentration polarization (ICP) and bioparticle preconcentration to enhance biosensing. Herein, we demonstrate the ability to dynamically control the electrically driven ion transport by integrating individually addressable microvalves. The microvalves are located along a main microchannel that is uniformly coated with a thin layer of an ion-exchange membrane (IEM). The interplay of ionic transport between the solution within the microchannel and the thin IEM, under an applied electric current, can be locally tuned by the deformation of the microvalve. This tunability provides a robust and simple means of implementing new functionalities into lab-on-a-chip devices, e.g., dynamic control over multiple ICP layers and their associated preconcentrated molecule plugs, multiplex sensing, suppression of biofouling as well as plug dispersion, while maintaining the well-known application of microvalves as steric filtration.

Herein we demonstrate the ability to optically tune the mobility of electrically powered Janus particles (JP) that are half coated with various Zinc Oxide (ZnO) semiconducting layers, i.e. polycrystalline, amorphous and amorphous with a SiO2 passivation layer. The ZnO semiconductor photo-response enables increase in its electrical conductivity with light having wavelengths of sufficient photon energy with respect to the semiconductor bandgap. This effect, termed optically modulated electrokinetic propulsion (OMEP), can be harnessed to increase the contrast in polarizability between the dielectric and semiconducting hemispheres, which in turn, results in an increased electrokinetic mobility. The addition of optical activation to the electrical field enables an additional degree of control of JP mobility. We also demonstrate optical control of collective behavior and particle-particle interactions for dense semi-conducting Janus particle populations.