Search

Microinjection technology has been widely applied in various fields, including biology, medicine, and intracytoplasmic sperm injection (ICSI). In a typical ICSI environment, all tasks, such as determining the degree of extension, adjusting the depth of focus, finding polar bodies, and manipulating cells, rely only on visual information; therefore, the person performing ICSI should have particular skills. Consequently, ICSI is generally performed by embryologists specialized in embryo handling. However, with the recent growth in global demand for ICSI, there is a shortage of embryologists and lack of experience among embryologists, and a simple injection system that does not rely on skilled embryologists is required. In this study, we propose a micromanipulation interface that provides a surface tactile sensation with a fabric actuator based on the real-time image measurement of the degree of cell deformation to simplify our understanding of the cell state. The effectiveness of the proposed interface is verified through cell-puncture experiments conducted by novices and one expert.

We implemented and evaluated our previous path planning method for inspection using unmanned aerial vehicles (UAVs) in real-world, and identified its shortcomings in handling positioning errors. Then, we proposed an enhanced method to address this problem. The previous method theoretically guaranteed complete coverage of targets and data quality. However, we verified it in bridge inspection experiments and found that the former has not been ensured. The crucial factors of data omission are clarified as the errors in UAV positioning. Our previous method relies on appropriately setting ideal allowances to counteract positioning errors, which is challenging in practice. Therefore, we proposed an enhanced path planning method, which adaptively adjusts allowances according to positioning error to prevent omission while minimizing waypoints. In the simulation including positioning disturbances, the enhanced method consistently achieved full coverage in 1000 times simulation with over 28% waypoints less than the previous one.

This paper investigates the feasibility and effectiveness of applying AR (Augmented Reality) technology to assist UAV (Unmanned Aerial Vehicle) pilots in collecting data for structure inspections. The challenge of using UAVs to collect inspection data is that pilots could not precisely determine where to collect qualified data. Using AR technology to provide visual assistance to pilots is expected to tackle this challenge. However, previous research has focused on enhancing pilots’ perception of UAVs’ current situations and goal waypoints. How to indicate ideal data collection poses (positions and orientations) with AR and the practical improvement that AR can bring remain unknown. Therefore, we proposed a system that visualizes ideal poses as AR models, allowing pilots to easily collect qualified data by aligning UAVs with these models and taking images. Experiments in virtual and real confirmed that the system significantly improves the proportion of the valid inspection area (achieving up to 99.3%).

This study presents an innovative approach in soft robotics, focusing on an inchworm-inspired robot designed for enhanced transport capabilities. We explore the impact of various parameters on the robot’s performance, including the number of activated sections, object size and material, supplied air pressure, and command execution rate. Through a series of controlled experiments, we demonstrate that the robot can achieve a maximum transportation speed of 8.54 mm/s and handle loads exceeding 100 g, significantly outperforming existing models in both speed and load capacity. Our findings provide valuable insights into the optimization of soft robotic design for improved efficiency and adaptability in transport tasks. This research not only contributes to the advancement of soft robotics but also opens new avenues for practical applications in areas requiring precise and efficient object manipulation. The study underscores the potential of biomimetic designs in robotics and sets a new benchmark for future developments in the field.

In recent years, there has been extensive utilization of actuators driven by artificial muscles in wearable devices. However, the muscle distribution configurations of most wearable devices have been specifically designed and are difficult to generalize. Consequently, wearable devices that allow direct installation of actuators onto existing clothing are better suited for a wider range of application scenarios. This letter presents the development and evaluation of Funabot-Suit, a human muscle configuration inspired wearable assist device that employs McKibben artificial muscles to induce natural kinesthetic perception in the wearer’s torso. By integrating thin McKibben muscles into an existing motion capture suit, the Funabot-Suit is capable of generating four fundamental motions: forward and backward bending, and left and right twisting. The suit’s performance was assessed through experiments involving three subjects who wore the suit while standing and seated, with the subjects reporting the direction of their kinesthetic perception. The subjects also rated the perceived ease of kinesthetic perception direction on a five-point scale. Our results demonstrate that the Funabot-Suit successfully induces kinesthetic perceptions for the wearer, with a one hundred percent detection ratio for accurate responses in the command direction across all subjects and positions. We observed variations in the sensitivity of left–right and up-down sensations, which can be attributed to the positioning of artificial muscles and individual differences.

We developed a wearable assistive robot that directly measures the contact force acting between the robot and the human body, aiming to enhance the safety of such wearable devices. The force acting on the body is not directly measured, instead, it is estimated by measuring the torque acting on the robot joint in the wearable assistive robot. Despite the risk of failing to recognize dangerous forces due to modeling errors, the forces actually at work have not been examined. Here, we developed an arm-mounted assistive robot that directly measures the contact force as the distribution information to build a system and evaluate safety; in addition, the contact state between the robot and the human body was discussed. Accordingly, two experiments were conducted with 10 subjects. The first verified the contact force measurement performance of the robot, while the second demonstrated the application of contact force information to check the safety of the robot. The proposed robot can accurately measure the contact force, and the robot movement is safe under general control, for example, using the pain tolerance limit as the safety index. This eliminated the risk of not directly monitoring the forces acting on the surface of the human body. Furthermore, our result have implication for evaluating structural problems of the robot by evaluating contact conditions during movements.