Search

We demonstrate a novel flat-field, dual-optic imaging EUV-soft X-ray spectrometer and monochromator that attains an unprecedented throughput efficiency exceeding 60% by design, along with a superb spectral resolution of λ/Δλ > 200 accomplished without employing variable line spacing gratings. Exploiting the benefits of the conical diffraction geometry, the optical system is globally optimized in multidimensional parameter space to guarantee optimal imaging performance over a broad spectral range while maintaining circular and elliptical polarization states at the first, second, and third diffraction orders. Moreover, our analysis indicates minimal temporal dispersion, with pulse broadening confined within 80 fs tail-to-tail and an FWHM value of 29 fs, which enables ultrafast spectroscopic and pump-probe studies with femtosecond accuracy. Furthermore, the spectrometer can be effortlessly transformed into a monochromator spanning the EUV-soft X-ray spectral region using a single grating with an aberration-free spatial profile. Such capability allows coherent diffractive imaging applications to be conducted with highly monochromatic light in a broad spectral range and extended to the soft X-ray region with minimal photon loss, thus facilitating state-of-the-art imaging of intricate nano- and bio-systems, with a significantly enhanced spatiotemporal resolution, down to the nanometer-femtosecond level.

This paper presents a hermitic fiber sensor packaging technique that enables fiber sensors to be embedded in energy systems for performing multi-parameter measurements in high-temperature and strong radiation environments. A high-temperature stable Intrinsic Fabry–Perot interferometer (IFPI) array, inscribed by a femtosecond laser direct writing scheme, is used to measure both temperature and pressure induced strain changes. To address the large disparity in thermo-expansion coefficients (TECs) between silica fibers and metal parts, glass sealants with TEC between silica optical fibers and metals were used to hermetically seal optical fiber sensors inside stainless steel metal tubes. The hermetically sealed package is validated for helium leakages between 1 MPa and 10 MPa using a helium leak detector. An IFPI sensor embedded in glass sealant was used to measure pressure. The paper demonstrates an effective technique to deploy fiber sensors to perform multi-parameter measurements in a wide range of energy systems that utilize high temperatures and strong radiation environments to achieve efficient energy production. [ABSTRACT FROM AUTHOR]

Halide perovskite materials are considered a promising optical gain medium for stimulated emission and have aroused tremendous interest in the field of laser research. The development of low‐threshold optically pumped amplified spontaneous emission (ASE) is critical for the advancement of continuous wave (CW) and electrically pumped micro‐nano lasers. In this work, an efficient ZnS additive is incorporated into the FA0.85MA0.15PbI2.55Br0.45 perovskite films to diminish the ASE threshold and extend the photostability by the dual‐site synergistic passivation. The experimental measurements and first‐principles calculations based on the density functional theory (DFT) are employed to elucidate the doping mechanism. The designed ZnS‐based perovskite films yield a mitigated ASE threshold of 8.5 µJ cm−2 with an elevated optical gain coefficient of 109.06 cm−1, which outperform those of the control films (12.7 µJ cm−2 and 74.10 cm−1). The in‐depth experimental characterizations and theoretical calculations have corroborated that the improvement of ASE performance can be ascribed to the dual‐site synergistic passivation effects of Zn2+ and S2−, which reduces the surface defects of perovskite films, suppresses the nonradiative charge recombination and improves the optical stability. This work provides a resultful strategy to construct the solution‐processed perovskite lasers with low thresholds and superior stability. [ABSTRACT FROM AUTHOR]

This article examines the impacts of mode hopping on the sensing performance of optical frequency domain reflectometry (OFDR) and explores the potential for developing economical OFDR interrogators employing low-cost distributed feedback (DFB) lasers. By conducting numerical simulations, this study reveals that mode hopping has minimal effects on distance sensing measurements in free space due to the limited duration of beat interference signal at the incorrect frequency within the coherence length. Additionally, the simulations indicate that mode hopping only slightly affects the distributed strain sensing of OFDR, resulting in an error range of less than ± 1 µ ε when 100 µ ε is applied to the sensing fiber. These findings highlight the potential of using low-cost DFB lasers with a 1-nm wavelength sweep range and a 1-MHz linewidth as tunable laser sources in OFDR while maintaining reliable and accurate sensing performance. [ABSTRACT FROM AUTHOR]

Energy management strategies for hydrogen fuel cell hybrid electric vehicles (FCHEVs) are a key factor in achieving real-time vehicle energy optimization control, vehicle driving economy, and fuel cell durability. In this paper, for an FCHEV equipped with a fuel cell and supercapacitor, the quantitative information, logic rules, and operational constraints are transformed into linear integer inequalities according to its different operating modes, and the Hysdel language is used to establish its mixed logic dynamic model (MLD). Then, the energy management strategy based on model predictive control (MPC) is developed using the MLD model as the prediction model and the equivalent hydrogen consumption and the performance degradation of the fuel cell as the optimization performance indexes. Finally, under the World Light Vehicle Test Cycle, a joint simulation was carried out with Advisor and Simulink to verify the proposed strategy's superiority by comparing it with the power following control strategy (PFCS) and the compound fuzzy control strategy (CFCS). The results show that the strategy not only ensures real-time FCHEV energy control, but also reduces hydrogen consumption by 10.98% and 1.98% and the number of start/stop times of a fuel cell by six and four, compared to PFCS and CFCS, respectively, which improves the economy of the whole vehicle as well as the durability of the fuel cell. [ABSTRACT FROM AUTHOR]

In this letter, a portable trace carbon dioxide (CO2) measurement instrument based on photoacoustic spectroscopy (PAS) was proposed and designed. The nonresonance PA cell (PAC) including a cooper tube with 251.2 μl was designed. Two condenser microphones were used to measure the PA signal simultaneously. The center wavelength of the distributed feedback laser was chosen to 2004 nm. Within 1 s integral time, the detection limit for CO2 reached 12.7 ppm. The normalized noise‐equivalent absorption coefficient was calculated to be 4.8468 × 10−9 cm−1W/Hz1/2. With Allan‐Werle deviation analysis, the measurement detection limit for CO2 improved to 4 ppm with 30 s integration time. As a result, the trace CO2 instrument based on PAS shows a good performance in long‐term detection. [ABSTRACT FROM AUTHOR]

Introduction: Infertility is a focal issue in public health and affects human reproduction and survival. Notably, an increasing number of studies in recent decades have found that sperm DNA integrity plays a critical role in the development of healthy embryos. Among the multiple pathogenic factors of sperm DNA fragmentation, oxidative stress has proven to be predominant. Coenzyme Q10 supplementation, which has been used for the treatment of male infertility, has shown good clinical efficacy due to its oxidation resistance, but its efficacy as measured by the sperm DNA fragmentation index remains controversial. To address this issue, we will perform a systematic review and meta-analysis to evaluate the efficacy of coenzyme Q10 for male infertility patients with a high sperm DNA fragmentation index., Methods and Analysis: The PubMed, Embase, Cochrane Central Register of Studies and Web of Science databases will be comprehensively searched from inception to 31 December 2022 to identify relevant studies published in the English language using appropriate search strategies. The search terms will be derived from the following concepts: sperm DNA fragmentation, coenzyme Q10 and randomised controlled trials. Two review stages, that is, title and abstract screening and full-text screening, will be performed by two reviewers. The risk of bias, publication bias and evidence grade of the included studies will be assessed using a standardised protocol. Data will be used to calculate effect sizes. Heterogeneity among the studies will be evaluated graphically. Subgroup analysis and sensitivity analysis will be performed if necessary to validate the results., Ethics and Dissemination: No ethical approval will be needed, as there will be no participants in this study. We will follow the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines to disseminate the findings through publication and conference presentation., Prospero Registration Number: CRD42022293340., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2023. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

We designed and implemented a photoacoustic (PA) sensor for H 2 S detection in SF 6 background gas based on a multi-pass differential photoacoustic cell (MDPC) and a near-infrared distributed feedback (DFB) laser. In the MDPC apparatus, two resonators with identical geometric parameters were vertically and symmetrically embedded. The differential processing algorithm of two phase-reversed signals realized the effective enhancement of the PA signal and suppressed the flow noise in the dynamic sampling process. In addition, the λ/4 buffer chamber in the MDPC was utilized as a muffler to further reduce the flow noise and realize the dynamic detection of H 2 S. The collimated excitation light was reflected 30 times in a multi-pass structure constituted of two gold-plated concave mirrors, and an absorption path length of 4.92 m was achieved. Due to the high gas density of SF 6 , the relationship between the signal-to-noise ratio (SNR) and the gas flow was different between SF 6 and N 2 background gases. The maximum flow rate of the characteristic gas components detected in the SF 6 background is 150 standard cubic centimeters per minute (SCCM), which is lower than 350 SCCM in N 2 . The linearity property was analyzed, and the results show that the sensitivity of the sensor to H 2 S in the SF 6 background was 27.3 μV/ppm. With the structure, parameters, temperature, gas flow, and natural frequency of the MDPC been optimized, a minimum detection limit (MDL) of 11 ppb was reached with an averaging time of 1000 s, which furnished an effective preventive implement for the safe operation of gas insulation equipment.