Search

With the availability of low-cost, mass-market dual-frequency GNSS (Global Navigation Satellite System) receivers, standalone processing methods such as Precise Point Positioning (PPP) are no longer restricted to geodetic-grade GNSS equipment only. However, with cheaper equipment, data quality is expected to degrade. This same principle also affects low-cost GNSS antennas, which usually suffer from poorer multipath mitigation and higher antenna noise compared to their geodetic-grade counterparts. This work assesses the quality of a particular piece of low-cost GNSS equipment for real-time PPP and high-rate dynamic monitoring applications, such as strong-motion seismology. We assembled the u-blox ZED-F9P chip in a small and light-weight data logger. With observational data from static experiments—which are processed under kinematic conditions—we assess the precision and stability of the displacement estimates. We tested the impact of different multi-band antenna types, including geodetic medium-grade helical-type (JAVAD GrAnt-G3T), as well as a low-cost helical (Ardusimple AS-ANT2B-CAL) and a patch-type (u-blox ANN-MB) antenna. Besides static tests for the assessment of displacement precision, strong-motion dynamic ground movements are simulated with a robot arm. For cross-validation, we collected measurements with a JAVAD SIGMA G3T geodetic-grade receiver. In terms of precision, we cross-compare the results of three different dual-frequency, real-time PPP solutions: (1) an ambiguity-float solution using the Centre National d'Études Spatiales (CNES) open-source software, (2) an ambiguity-float and an AR (ambiguity-resolved) solution using the raPPPid software from TU Vienna, and (3) and a PPP-RTK solution using the u-blox PointPerfect positioning service. We show that, even with low-cost GNSS equipment, it is possible to obtain a precision of one centimeter. We conclude that these devices provide an excellent basis for the densification of existing GNSS monitoring networks, as needed for strong-motion seismology and earthquake-early-warning. [ABSTRACT FROM AUTHOR]

• Using the PPP approach with a single GNSS receiver was obtained seismic waves and permanent displacements. • The moment magnitudes of earthquakes were successfully estimated by applying kinematic PPP with the MADOCA real-time products. • Real-time multi-GNSS kinematic PPP promises an effective method for early warning. Early warning and emergency hazard response studies in large earthquakes require rapid and reliable determination of earthquake magnitude. The magnitude of an earthquake can be estimated based on peak ground displacement (PGD) values captured from high-rate GNSS records. In this study, two major earthquakes that hit Kahramanmaraş Province on February 6, 2023, were investigated by using the real-time Global Navigation Satellite System (GNSS) Precise Point Positioning (PPP) technique to confirm the usability of GNSS in early warning. Data from high-rate (1-Hz) GNSS stations were evaluated with the real-time kinematic PPP approach utilizing the multi-GNSS advanced demonstration tool for orbit and clock analysis (MADOCA) products and JPL's GipsyX software. In addition, static PPP was also used to identify the permanent displacements caused by earthquakes. Static PPP results demonstrated that significant displacements were detected at stations close to the epicenters, particularly the 446.86 cm horizontal displacement in the EKZ1 station. Considering the kinematic PPP results revealed that when PGD values calculated from seismic waves, functional model, and updated coefficients were implemented, the moment magnitude of the Pazarcık earthquake was estimated as Mw 7.78, which was reported as Mw 7.8 by USGS and Mw 7.7 by AFAD, whilst the magnitude of the Elbistan earthquake was computed as Mw 7.56, which was reported as Mw 7.5 by USGS and 7.6 by AFAD. Overall, this study validates the effectiveness of the real-time GNSS PPP as an attractive alternative for analyzing coseismic events and supporting early warning. [ABSTRACT FROM AUTHOR]