Search

The pulse duration in short-pulse schemes for Self-Amplified Spontaneous Emission Free Electron Lasers (SASE FELs) is limited by the FEL coherence time. A recently proposed concept allows to overcome the coherence time barrier and to obtain much shorter pulses. When the lasing part of an electron bunch is much shorter than the coherence time, one can suppress the radiation in the long main undulator while preserving microbunching within that short lasing slice. Then, a short radiation pulse is produced in a relatively short radiator. A possible suppression method, an excessive reverse undulator taper, is discussed and illustrated numerically in this paper. We also performed the first experimental tests of this method at the soft X-ray FEL user facility FLASH. The measured pulse duration approaches 1 fs (FWHM) at the wavelength of 5 nm. [ABSTRACT FROM AUTHOR]

The pulse duration in short-pulse schemes for Self-Amplified Spontaneous Emission Free Electron Lasers (SASE FELs) is limited by the FEL coherence time. A recently proposed concept allows to overcome the coherence time barrier and to obtain much shorter pulses. When the lasing part of an electron bunch is much shorter than the coherence time, one can suppress the radiation in the long main undulator while preserving microbunching within that short lasing slice. Then, a short radiation pulse is produced in a relatively short radiator. A possible suppression method, an excessive reverse undulator taper, is discussed and illustrated numerically in this paper. We also performed the first experimental tests of this method at the soft X-ray FEL user facility FLASH. The measured pulse duration approaches 1 fs (FWHM) at the wavelength of 5 nm.

A three-cell 1.3 GHz, Normal Conducting (NC) buncher is designed for a possible future upgrade of the European X-ray Free Electron Laser (Eu-XFEL) to operate in a continuous-wave (CW)/ long pulse (LP) mode. The RF geometry of the buncher is optimized for high shunt impedance, large mode separation as well as multipacting free in the operation range. The nominal buncher voltage is 400 kV with an RF power dissipation of 14 kW, and its shunt impedance is ∼ 50% higher than existing CW bunchers. The RF power coupler cell is optimized for field symmetry to minimize coupler kick effect on beam dynamics. The thermal load due to RF power dissipation is analyzed using Multiphysics simulations in CSTMWS and a cooling scheme is designed. [ABSTRACT FROM AUTHOR]

The electron source still remains a major challenge for continuous-wave (CW) X-ray free-electron lasers (FELs). In this paper, we study the feasibility of an injection line based on a DC and superconducting radio-frequency (SRF) combined photocathode injector. We present a detailed investigation on the longitudinal phase space evolution of the electron beam along the injection line. We also analyze the main issues determining the high-order energy spread and current skewness. Based on the analysis, we propose to use a harmonic cavity as the buncher for the injection line. Simulation shows that an extracted electron beam with a normalized RMS emittance of 0.37 μ m, an RMS bunch length of 1.0 mm, a high-order RMS energy spread of 2.75 keV, and a current skewness of 0 can be obtained at the bunch charge of 100 pC. This study is meaningful to the design of the injection lines for short-wavelength CW FELs, including those based on normal-conducting very-high-frequency (VHF) guns or DC guns. [ABSTRACT FROM AUTHOR]