Search

The incorporation of uranium into gadolinium zirconate (Gd2Zr2O7) is investigated by synchrotron X-ray powder diffraction and X-ray absorption near-edge structure (XANES) spectroscopy. The results suggest that the uranium cation is largely located on the pyrochlore B-site instead of the targeted A-site. Cation disorder in Gd2Zr2O7 and U-doped Gd2Zr2O7 is investigated by positron annihilation lifetime spectroscopy (PALS) which demonstrates the absence of cation vacancies in these systems. This work provides direct evidence for cation antisite (A- and B-site mixing) disorder in U-doped and off-stoichiometric Gd2Zr2O7 pyrochlore. [ABSTRACT FROM AUTHOR]

Abstract: The incorporation of plutonium (Pu) within lanthanum zirconate pyrochlore was investigated using air, argon, and N2–3.5%H2 sintering atmospheres together with Ca2+ and Sr2+ incorporation for charge compensation. The samples have been characterised in the first instance by X-ray diffraction (XRD), scanning electron microscopy (SEM) and diffuse reflectance spectroscopy (DRS). The results show Pu can be exchanged for La3+ on the A-site with and without charge compensation and for Zr4+ on the B-site. DRS measurements were made over the wavenumber range of 4000–19,000cm−1 and the Pu in all air- and argon-sintered samples was found to be present as Pu4+ while that in samples sintered in N2–3.5%H2 was present as Pu3+. The Pu valence was confirmed for three of the samples using X-ray near-edge absorption spectroscopy (XANES). Pu valences >4+ were not observed in any of the samples. [Copyright &y& Elsevier]

Abstract: A series of uranium-containing gadolinium zirconate samples have been fabricated at 1450°C in oxidizing, inert and reducing atmospheres. X-ray diffraction, Raman spectroscopy and transmission electron microscopy have been utilized to confirm adoption of pyrochlore or defect fluorite structures. X-ray diffraction allowed determination of the bulk averaged structure while Raman spectroscopy and transmission electron microscopy were used to determine ordering at the microdomain scale. Diffuse reflectance, X-ray absorption near edge structure and X-ray photoelectron spectroscopies indicated a predominantly U6+ oxidation state for all the air-sintered samples, even when Ca2+ or A-site vacancies were incorporated to charge balance for U4+, a mixed U5+/U6+ oxidation state was found for samples sintered in argon, while a mixed U4+/U5+ oxidation state occurred for sintering under N2–3.5%H2. This demonstrates a degree of uranium oxidation state control through sintering conditions, and the potential of using gadolinium zirconates as host materials for uranium in nuclear waste applications. [Copyright &y& Elsevier]

A comprehensive review of the current advances on titanate glass-ceramic composite materials as waste forms for actinide immobilization is given. Apart from providing a comprehensive summary of earlier works in the field, some technical analysis and perspectives are provided pointing to the potential future studies. [Display omitted] • A comprehensive review on titanate glass-ceramic waste forms for actinide immobilization is provided. • Current advances on the titanate glass-ceramic composite materials are summarised. As the emerging versatile waste forms for immobilizing actinide-rich radioactive wastes, glass-ceramic composite materials based on some durable ceramic phases are being developed. They have apparent advantages over the conventional borosilicate glasses and multi- or single- phase ceramics as they essentially combine the chemical and processing flexibilities of glasses to accommodate processing impurities and excellent chemical durability of ceramic phases to host actinides. More recently, some new advances have been made on scientific and technological aspects including new glass-ceramic systems; improved understanding of ceramic phase evolution in glass; actinide validation studies and simplified processing techniques. This review is intended to cover the current advances on the development of glass-ceramic composite waste forms focusing on titanate ceramic phases (zirconolite, pyrochlore and brannerite) for immobilizing various actinide-rich radioactive wastes arising from the nuclear fuel cycle. [ABSTRACT FROM AUTHOR]

Pyrochlore structured Gd2Zr2O7 and Nd2Zr2O7 are produced via complex precipitation processing. A suite of characterization techniques, including FTIR, Raman, X-ray and electron diffraction, TEM, SEM as well as nitrogen sorption are employed to investigate the structural and grain size evolution of the synthesized and calcined powder. Results show that Gd2Zr2O7 with the pyrochlore structure are produced after calcination at 1400°C for 12h while Nd2Zr2O7 has already formed the pyrochlore structure at 1200°C. This method allows the formation of dense materials at relatively low temperature, with bulk densities over 92% of the theoretical values achieved after sintering at 1400°C for 50h. This unique aqueous synthetic method provides a simple pathway to produce pyrochlore lanthanide zirconate without using either organic solvent and/or mechanical milling procedures, making the synthesis protocol an attractive potential scale-up production of highly refractory ceramics. [ABSTRACT FROM AUTHOR]

[Display omitted] Pyrochlore glass ceramics have been fabricated via in-situ crystallization under reducing conditions by both sintering and hot isostatic pressing (HIPing) as candidate wasteforms for the acidic waste biproduct of Mo-99 radiopharmaceutical production. The tailored wasteform demonstrates flexibility in the wasteform design to receive the required waste variability, it also suitably passes high-level waste performance requirement, and successfully scales to 1 kg scale with 45 wt.% waste loading. U-rich pyrochlore as the major phase was confirmed by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy, with residual glass and minor secondary phases. The presence of both U4+ and U5+ valences in the wasteforms was revealed by diffuse reflectance spectroscopy. Addition of glass content had little influence on the pyrochlore composition but facilitated minor perovskite formation. The up-scaled dense, HIPed sample showed elemental releases of < 2 g/L for all elements in durability experiments. [ABSTRACT FROM AUTHOR]

Graphical abstract Both Y 2 Ti 2 O 7 and Gd 2 Ti 2 O 7 pyrochlore glass-ceramics have been prepared with a typical oxide route and consolidated via hot isostatic pressing, and characterized as potential waste forms for the immobilization of actinide-rich radioactive wastes. Abstract Both Y 2 Ti 2 O 7 and Gd 2 Ti 2 O 7 pyrochlore glass-ceramics (GCs) have been prepared with an oxide route and consolidated via hot isostatic pressing (HIPing) as waste forms for actinide immobilization. The crystallization of Y 2 Ti 2 O 7 /Gd 2 Ti 2 O 7 pyrochlore as the major actinide host phase in the residue glass has been confirmed with XRD, SEM-EDS and Raman spectroscopy. The static leaching tests confirmed that both GCs are chemically durable with normalized Y/Gd and Ti leach rates ∼10−4–10-5 g m-2 d-1 after 28 days. In addition, the interactions between the 316L stainless steel (SS) HIP-can and the GCs have been investigated. Interactions occur at the interface with a layer of mixed Cr/Ti oxide and CrTi 2 O 5 crystals observed for the Y 2 Ti 2 O 7 GC and a layer (∼10 μm) of Cr 2 O 3 observed for the Gd 2 Ti 2 O 7 GC as the reaction fronts from the SS cans. Furthermore, a layer (∼10 μm) of Gd-(Si/Ti)-oxide phase formed on the GC side of the interface. [ABSTRACT FROM AUTHOR]

Glass-ceramics (GCs) based on titanate pyrochlores have attracted recent attention as candidate waste forms for actinide immobilization. As zirconate pyrochlore has a superior radiation resistance, it is anticipated that Zr substitution of Ti in titanate pyrochlore GCs would increase their potential for waste form applications. The concept was primarily addressed via the preparation of Gd 2 Ti 2-x Zr x O 7 (x = 0.1–0.3) GCs to determine the effects of sintering temperature, Zr substitution, and pyrochlore content (50–70 wt%) on the properties of the resultant GCs. XRD and SEM analyses were used to reveal the phase assemblages and microstructures while TEM and Raman spectroscopy were used to analyze the local structures. XRD results confirmed the formation of the targeted pyrochlore as the major phase, with Gd 9.33 (SiO 4) 6 O 2 oxyapatite present as a minor phase. SEM analyses revealed that up to 0.2 formula units of Ti could be substituted by Zr under the processing conditions. The pyrochlore crystallite sizes were largely controlled by the sintering temperature and cooling rate and showed little sensitivity to the glass contents. This work has demonstrated successful substitutions of Ti with Zr in Gd 2 Ti 2 O 7 GCs as potential waste forms for actinide wastes owing to their superior radiation resistance. The feasibility of Zr substitution of Ti in Gd 2 Ti 2 O 7 glass-ceramics for improving radiation resistance of titanate pyrochlore glass-ceramics as potential composite waste forms for actinide immobilization has been investigated. It has been demonstrated that up to 0.2 formula units of Zr can replace Ti in Gd 2 Ti 2 O 7 to form titanate-zirconate pyrochlore glass-ceramics with major crystalline pyrochlores and a minor Gd-silicate oxyapatite phase. [Display omitted] • Zr substitution of Ti in Gd 2 Ti 2 O 7 glass-ceramics for better radiation tolerance. • Up to 0.2 formula units of Zr can replace Ti under the experimental conditions. • Phase assemblage, structure and microstructure have been investigated. • The glass-ceramics contain major pyrochlore and minor oxyapatite. [ABSTRACT FROM AUTHOR]