Search

• A new P-type transparent conductive LaSe 2 film with excellent photoelectric properties is found. • A novel two-step method is used to prepare LaSe 2 film. • Effect of annealing time on their photoelectric properties is investigated. • Results indicate that the best annealing time is 2 h. LaSe 2 films were prepared on sapphire (0001) substrates by combining magnetron sputtering and selenized annealing. The influence of selenized annealing time on the structures and photoelectric properties of the thin films were investigated using glancing incident X-ray diffraction, fourier transform infrared spectrometry and Hall effect measurements. The results showed that the film had a perfect monoclinic structure and a smooth surface morphology. The average transmittance in the mid-infrared range was greater than 55%, and the highest was 65%. The LaSe 2 films had a higher carrier concentration (∼1019 cm−3) and conductivity (∼1.9 S/cm) than those of other P-type transparent conductive films, which showed that LaSe 2 was a potential new P-type material. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • A novel two-step method is developed to grow 2D Mg(OH) 2 nanoflakes. • The proposed method is environmentally benign. • The method does not require catalysts or harsh acid-base conditions. • The Mg(OH) 2 films had a crystalline hexagonal structure is dominant. • The water contact angle of 139° showed the good hydrophobicity of the film. Abstract A novel and environmentally benign two-step method has been developed to grow 2D magnesium hydroxide (Mg(OH) 2) nanoflakes. Our method relies on the deposition of Mg films by magnetron sputtering, followed by reaction with water vapor, and does not require any catalyst or harsh acid-base conditions. The 2D nanoflake surface morphology with a crystalline hexagonal structure was dominant on the Mg(OH) 2 films. The water contact angle on the film was ∼139°, which testified the good hydrophobicity of Mg(OH) 2 films due to the nanoflake surface. The self-cleaning effect of contaminant particles on hydrophobic Mg(OH) 2 films was analyzed. Compared with other preparation methods, this two-step method is more efficient, cleaner, and simpler, which make it suitable for complex or large-area substrate surfaces. In addition, this method can be applied to other metal hydroxides or oxides. [ABSTRACT FROM AUTHOR]

The hydrated magnesium-carbon films fabricated in this study are the novel-innovative non-oxide-type transparent electronic material. The films, which have a structure similar to that of magnesium hydroxide, were produced by making Mg x -C y films deposited by magnetron co-sputtering react with water vapor. As the extrinsic defect of hydration magnesium-carbon films, C atoms provided redundant electrons, resulting in a conductivity of approximately 3.31 × 10 −2  Ω·cm. Although the conductivity of hydrated magnesium-carbon films is not prominent comparing to the conventional and widely-used n-type TCO materials, e.g. ITO, the films also showed excellent optical properties, which can be attributed to their low bond energy, with the infrared transmittance of the films being greater than 72% for a plasma wavelength of approximately 10 μm. By varying the atomic C content of the films, a visible-region transmittance greater than 80% could be realized. The optical bandgap of the films was approximately 4.04–6.87 eV and was blue-shifted because of the Moss-Burstein effect. [ABSTRACT FROM AUTHOR]

Abstract: Thin films of La0.85Sr0.15MnO3 (LSM) are deposited on (100) silicon wafer and YSZ (yttria-stabilized zircornia) electrolyte substrates by magnetron sputtering using a single-phase LSM target. The conditions for sputtering are systematically studied, including substrate temperature (from room temperature to 600°C), the argon background pressure (from 1.2×10−2 to 3.0×10−2 mbar), and deposition time. Results show that the optimal conditions for producing a dense, uniform, and crack-free LSM film include a substrate temperature of 600°C and an argon pressure of 1.9×10−2 mbar. Further, a testing cell with a dense LSM film, an YSZ electrolyte membrane, and a porous LSM counter electrode is prepared and the electrochemical properties of the dense LSM film on YSZ substrate are studied. It was found that the thickness, morphology, and microstructure of LSM films critically influence the electrochemical properties. [Copyright &y& Elsevier]

Abstract: The magnetic and transport properties of epitaxial La0.7Ba0.3MnO3 films on LaAlO3 substrates have been investigated and compared with those on SrTiO3 substrates. It is found that the ferromagnetic and metallic transition temperature of the highly compressive strained films on LaAlO3 substrates decreases steadily with decreasing film thickness, while it changes little in the lightly strained films on SrTiO3 substrates. The properties of the films on LaAlO3 substrates are more sensitive to a post-annealing procedure. A tendency to phase separation, which induces a difference between the insulator–metal transition temperature T MI and the Curie temperature T C, is observed for the films with a medium oxygen annealing process. We argue that the phase separation is due to both the highly compressive strain and oxygen deficiency in the films. [ABSTRACT FROM AUTHOR]

• AZO/Ag/AZO multilayer films are prone to failures under thermal oxidation. • Inserting Ni layer can improve the photoelectric stability of AZO/Ag/AZO films. • Film had good transmittance, surface resistance and structure after oxidation at 500 °C. • Ag diffusion was inhibited by Ni layer and photoelectric stability was improved. Dielectric/metal/dielectric-structured transparent conductive films are prone to structural and functional failures under thermal oxidation environment. Herein, a Ni layer was employed to improve the photoelectric stability of AZO/Ag/AZO multilayer films. The AZO/Ni/Ag/AZO film exhibited a transmittance of 75%, surface resistance of ~7 Ω/sq, and stable structure after thermal oxidation treatment at 500 °C. The visible light transmittance, surface resistance, and figure of merit values of the AZO/Ag/AZO and AZO/Ni/Ag/AZO films were determined after high-temperature treatment in ambient air. The diffusion of Ag was effectively inhibited by the Ni layer, and the photoelectric stability of AZO/Ag/AZO films was improved under thermal environment. [ABSTRACT FROM AUTHOR]