Search

Purpose Micro-holes are drilled and plated in flexible printed circuit boards (FPCs) for connecting circuits from different layers. More holes, with diameters smaller than 0.3 mm, are required to be drilled in smaller areas with flexible circuits’ miniaturization. The micro-hole quality of micro-drilling is one of the biggest issues of the flexible circuit manufacturers’ production. However, it is not easy to control the quality of micro-holes. The purpose of this study was to conduct research on the tool wear characteristics of FPC drilling process and its influence on micro-hole quality to improve the micro-hole quality of FPC.Design/methodology/approach The tool-wear characteristics of micro-drills after FPC drilling were observed. The influence of spindle speed, feed rate, number of drilled holes and entry board materials on tool-wear was analyzed. The hole qualities of FPC micro-drilling were measured and observed. The relationship between tool-wear and hole quality was analyzed.Findings The result showed that the tool-wear characteristics of FPC micro-drilling was similar to the tool-wear characteristics of rigid printed circuit board (RPC) micro-drilling. Abrasive wear occurred on both the main cutting edges and the chisel edges of micro-drills, even though there was no glass fiber reinforcing the cloth inside FPC. Resin adhesion was observed on the chisel edge. The influence of feed and number of drilled holes on tool-wear was significant. Tool-wear significantly influences the hole quality of FPC. Tool-wear will largely decrease the hole position accuracy of FPC micro-holes. Tool-wear will increase the thickness of PI nail heads and the height of exit burrs. Fracture was the main difference between tool wear of FPC and RPC micro-drilling. Resin adhesion of RPC was much more severe than FPC micro-drilling. Increasing the spindle speed properly may improve tool life and hole quality.Originality/value The technology and manufacturing of FPC has been little investigated. Research on micro-drilling FPC and research data is lacking so far. The micro-hole quality directly affects the reliability of FPC. Thus, improving the micro-hole quality of FPC is very important. [ABSTRACT FROM AUTHOR]

Purpose – The purpose of this study is to present the entry drilling process of flexible printed circuit board (FPCs) and its influence on hole quality, especially hole location accuracy. Compared with the traditional PCB drilling process, the technology of drilling FPCs is facing more problems, such as hole location accuracy, smear on the hole wall surface, burned hole wall surface, etc. Moreover, the materials of FPCs are quite different from the rigid printed circuit boards (RPCs). FPCs no longer contain glass fiber cloths to reinforce resin, resulting in flexibility. Micro-hole quality is the most important issue in FPC drilling. Suggestions were given to obtain higher hole qualities and higher FPC reliability. Design/methodology/approach – The entry drilling process of FPC with different kind of entry boards was observed by a high-speed camera. The hole qualities of FPC micro-drilling, especially hole location accuracy and hole entrance quality, were measured. The relationship between entry boards and hole quality was analyzed. Findings – Significant sliding occurred when drilling FPC with using no-entry board or pure aluminum plate entry board. On the contrary, no significant sliding occurred when using LC-110 or resin-coated aluminum foil (MVC) entry boards. The type, thickness and use-pattern of entry boards influenced hole location accuracy of FPCs seriously. In addition, entry board also influenced the micro-hole entrance quality and micro-hole diameter. The entrance quality of drilling FPC with LC-110 entry board was the best. The diameter variation of drilling FPC with MVC entry board was the smallest. The hole location accuracy decreased as the thickness of entry board increased. Thus, the best use-pattern of entry board was putting a LC-110 under MVC entry board, resulting in best entrance quality and hole location accuracy. Originality/value – The technology and manufacturing of FPCs in China are obviously behind. Research of FPCs micro-drilling and research data are lacking so far. Thus, it is most necessary to improve the technology level of FPCs micro-drilling in China. Researches on hole quality, especially hole location accuracy of FPCs drilling, were performed in this paper. Suggestions were given to obtain higher hole quality of FPCs. [ABSTRACT FROM AUTHOR]