Search

This paper focuses on the problem of maximizing the minimum power gain in a wide main lobe for an array antenna. To obtain the desired power gain pattern, current literatures solve the problem known as shaped beam pattern synthesis (SBPS) by setting the beam pattern expression as the cost function. The power gain in a certain direction of the array antenna is comprehensively decided by the array radiated power density and the total radiated power. Both these two parameters are affected by the selection of array elements’ weights. However, the SBPS-based methods do not take the total radiated power into account. Therefore, the SBPS-based methods cannot obtain the power gain pattern directly, and the optimal power gain pattern, consequently, cannot be guaranteed. To overcome this deficiency, this paper maximizes the minimum power gain in the desired wide main lobe by directly setting the power gain expression as the cost function. Aiming at optimizing the cost function, this paper first sets up a power gain optimization problem which has concave form. Termed this optimization problem as the power gain pattern synthesis (PGPS) problem. The concave PGPS problem is then converted to a series of convex subproblems and an iterative algorithm is proposed to solve it efficiently. Solution to the PGPS problem is proven to be able to achieve higher minimum power gain in a desired wide main lobe than the results from the SBPS-based algorithms. Simulations are carried out with both linear array antenna and planar array antenna. Comparisons with the existed SBPS-based algorithms validate the effectiveness and advantages of the proposed PGPS-based algorithm. In addition, further improvement on suppressing the sidelobe level for the PGPS problem is discussed. [ABSTRACT FROM AUTHOR]

The deployment of cloud and edge computing forms a three-tier mobile computing network, where each task can be processed locally, by the edge nodes, or by the remote cloud server. In this paper, we consider a cooperative three-tier computing network by leveraging the vertical cooperation among devices, edge nodes and cloud servers, as well as the horizontal cooperation between edge nodes. In this network, we jointly optimize the offloading decision and the computation resource allocation to minimize the average task duration subject to the limited battery capacity of devices. However, the formulated problem is a large-scale mixed integer non-linear optimization problem with the growing number of base stations and devices, which is NP-hard in general. To develop an efficient offloading scheme with low complexity, we conduct a series of reformulation based on reformulation linearization technology and further propose a parallel optimization framework by utilizing alternating direction method of multipliers (ADMM) method and difference of convex functions (D.C.) programming. The proposed scheme decomposes the large-scale problem into some smaller subproblems, which are done across the multiple computation units in a parallel fashion to speed up the computation process. Simulation results demonstrate that the proposed scheme can obtain a near-optimal performance with low complexity, and can reduce up to 24% of the task duration compared with other schemes. Simulation also shows how much the vertical and horizontal computation cooperations affect the system performance under different network parameters. [ABSTRACT FROM AUTHOR]

In this paper, an adaptive synthesis using the particle swarm optimization (PSO) for implementations of resonator-coupled filters is proposed. The coupling matrix of in-band filtering response is achieved and optimized by the PSO-based synthesis. Meanwhile, the stopband coupling matrix of the filter is predicted based on the combination of extra resonant nodes representing stopband spurious and parasitic effect of input/output ports. In addition, an enhanced accurate prediction of filter performance is calculated by the proposed approach, considering the practical fabrication tolerance on filter design. To verify principles mentioned earlier, various resonator-coupled filters are implemented. The calculation, EM-simulation, and measurement of filters show good agreements in both passband and stopband. [ABSTRACT FROM AUTHOR]

Motivated by the work of Dahrouj and Yu in applying the Han-Kobayashi transmission strategy for mitigating the intercell interference in a multi-cell multi-user multiple-input single-output interference network (MISO IN), this paper considers splitting messages into private and common parts in a multi-cell multi-user MIMO IN. Specifically, the covariances of the private messages and common messages are designed to optimize either the sum rate or the minimal rate. The common messages and private messages are decoded in sequence using successive decoding. This paper shows how these difficult optimization problems can be adequately solved by means of d.c. (difference of concave functions) optimization over a simple convex set. Numerical and simulation results also reveal the great advantage of our proposed solutions for various types of INs. In particular, the proposed solutions are shown to outperform the algorithm developed by Dahrouj and Yu for the simpler case of the MISO IN. [ABSTRACT FROM PUBLISHER]

In this paper, we study the energy efficiency (EE) optimization for simultaneous wireless information and power transfer in multiple-input-multiple-output two-way amplify-and-forward relay networks, where the energy-constrained relay harvests energy from two sources’ signals by power splitting (PS) scheme to forward the information of two sources. Our objective is to jointly design the sources and relay precoding matrices and the PS ratio to maximize the EE of the network, under the transmit power constraints at sources and relay and the minimum spectral efficiency requirement. We transform the nonconvex precoding and PS design problem into a difference of convex programming and propose an efficient iterative algorithm based on the constrained concave convex procedure to obtain a local optimum. To reduce computational complexity, we propose a generalized singular value decomposition based channel diagonalization scheme to simplify the optimization into a joint source and relay power allocation problem. The alternating optimization method is employed to solve this problem and a suboptimal solution to the EE maximization problem is obtained. Simulation results demonstrate the effectiveness of the proposed schemes. [ABSTRACT FROM AUTHOR]

The selection of optimum parameters in electromagnetic design usually requires optimization of multimodal, nonlinear functions. This leads to extensive calculations which pose a huge inconvenience in the design process. This paper proposes a novel algorithm for dealing efficiently with this issue. The proposed algorithm interprets the problem as an unexplored terrain for climbing. Through the use of contour line concept coupled with Kriging, the algorithm finds out all the peaks in the problem domain with as few function calls as possible. The efficiency of the proposed algorithm is demonstrated by application to conventional test functions. In this paper, the simulation results show that skewing does not necessarily reduce the cogging torque but may cause it to increase for certain pole-arc to pole-pitch ratio. The developed algorithm is applied to the magnet shape optimization of an axial flux permanent magnet synchronous machine and the cogging torque was reduced to 79.8% of the initial one. [ABSTRACT FROM AUTHOR]

This paper considers localization of a source or a sensor from distance measurements. We argue that linear algorithms proposed for this purpose are susceptible to poor noise performance. Instead given a set of sensors/anchors of known positions and measured distances of the source/sensor to be localized from them we propose a potentially nonconvex weighted cost function whose global minimum estimates the location of the source/sensor one seeks. The contribution of this paper is to provide nontrivial ellipsoidal and polytopic regions surrounding these sensors/anchors of known positions, such that if the object to be localized is in this region, localization occurs by globally exponentially convergent gradient descent in the noise free case. Exponential convergence in the noise free case represents practical convergence as it ensures graceful performance degradation in the presence of noise. These results guide the deployment of sensors/anchors so that small subsets can be made responsible for practical localization in geographical areas determined by our approach. [ABSTRACT FROM AUTHOR]

In space communication environments, most studies in delay tolerant networks (DTNs) adopt experimental approaches and they have shown that the utilization efficiency of link bandwidth can be affected by changing packet sizes at the bundle layer and the convergence layer. However, the lack of theoretical work makes it difficult to find the optimal packet sizes in general scenarios. In this paper, we focus on this important issue by performing a theoretical analysis to solve the packet size optimization problems in both one-hop and multihop DTNs. As our analysis is based on the widely used DTN architecture with Bundle Protocol (BP) and Licklider Transmission Protocol (LTP), the theoretical results can be applied to any DTN scenario using this architecture. We formulate packet size optimization problems in DTNs as nonconvex optimization problems. Furthermore, a goodput enhancement algorithm (GEA) is also proposed to find the optimal packet sizes in order to maximize goodput in DTNs. We conduct numerical analysis as well as simulations to validate our theoretical analysis and study the factors that determine the optimal packet sizes for BP and LTP. Numerical results show that GEA achieves significant performance improvement compared with schemes where packet size optimization on BP and LTP is not jointly considered. [ABSTRACT FROM PUBLISHER]

In this paper, the empirical observability Gramian calculated around the operating region of a power system is used to quantify the degree of observability of the system states under specific phasor measurement unit (PMU) placement. An optimal PMU placement method for power system dynamic state estimation is further formulated as an optimization problem which maximizes the determinant of the empirical observability Gramian and is efficiently solved by the NOMAD solver, which implements the Mesh Adaptive Direct Search algorithm. The implementation, validation, and the robustness to load fluctuations and contingencies of the proposed method are carefully discussed. The proposed method is tested on WSCC 3-machine 9-bus system and NPCC 48-machine 140-bus system by performing dynamic state estimation with square-root unscented Kalman filter. The simulation results show that the determined optimal PMU placements by the proposed method can guarantee good observability of the system states, which further leads to smaller estimation errors and larger number of convergent states for dynamic state estimation compared with random PMU placements. Under optimal PMU placements an obvious observability transition can be observed. The proposed method is also validated to be very robust to both load fluctuations and contingencies. [ABSTRACT FROM PUBLISHER]

The performance of direct model predictive control (MPC) with reference tracking and long prediction horizons is evaluated through simulations, using the current control problem of a variable speed drive system with a voltage source inverter as an illustrative example. A modified sphere decoding algorithm is used to efficiently solve the optimization problem underlying MPC for long horizons. For a horizon of five and a three-level inverter, for example, the computational burden is reduced by four orders of magnitude, compared to the standard exhaustive search approach. This paper illustrates the performance gains that are achievable by using prediction horizons larger than one. Specifically, for long prediction horizons and a low switching frequency, the total harmonic distortion of the current is significantly lower than for space vector modulation, making direct MPC with long horizons an attractive and computationally viable control scheme. [ABSTRACT FROM AUTHOR]

In this paper, we combine two techniques together, i.e., the fast Fourier transform-twofold subspace-based optimization method (FFT-TSOM) and multiplicative regularization (MR) to solve inverse scattering problems. When applying MR to the objective function in the FFT-TSOM, the new method is referred to as MR-FFT-TSOM. In MR-FFT-TSOM, a new stable and effective strategy of regularization has been proposed. MR-FFT-TSOM inherits not only the advantages of the FFT-TSOM, i.e., lower computational complexity than the TSOM, better stability of the inversion procedure, and better robustness against noise compared with the SOM, but also the edge-preserving ability from the MR. In addition, a more relaxed condition of choosing the number of current bases being used in the optimization can be obtained compared with the FFT-TSOM. Particularly, MR-FFT-TSOM has even better robustness against noise compared with the FFT-TSOM and multiplicative regularized contrast source inversion (MR-CSI). Numerical simulations including both inversion of synthetic data and experimental data from the Fresnel data set validate the efficacy of the proposed algorithm. [ABSTRACT FROM PUBLISHER]

In this paper, we propose a systematic solution to the problem of scheduling delay-sensitive media data for transmission over time-varying wireless channels. We first formulate the dynamic scheduling problem as a Markov decision process that explicitly considers the users' heterogeneous multimedia data characteristics (e.g., delay deadlines, distortion impacts and dependences, and so on) and time-varying channel conditions, which are not simultaneously considered in state-of-the-art packet scheduling algorithms. This formulation allows us to perform foresighted decisions to schedule multiple data units for transmission at each time in order to optimize the long-term utilities of the multimedia applications. The heterogeneity of the media data enables us to express the transmission priorities between the different data units as a priority graph, which is a directed acyclic graph. This priority graph provides us with an elegant structure to decompose the multidata unit foresighted decision at each time into multiple single-data unit foresighted decisions which can be performed sequentially, from the high priority data units to the low priority data units, thereby significantly reducing the computation complexity. When the statistical knowledge of the multimedia data characteristics and channel conditions is unknown a priori, we develop a low-complexity online learning algorithm to update the value functions, which capture the impact of the current decision on the future utility. The simulation results show that the proposed solution significantly outperforms existing state-of-the-art scheduling solutions. [ABSTRACT FROM PUBLISHER]

Intercell interference is the major limitation to the performance of future cellular systems. Despite the joint detection and joint transmission techniques aiming at interference cancelation which suffer from the limited possible cooperation among the nodes, power allocation is a promising approach for optimizing the system performance. If the interference is treated as noise, the power allocation optimization problem aiming at maximizing the sum rate with a total power constraint is nonconvex and up to now an open problem. In the present paper, the solution is found by reformulating the nonconvex objective function of the sum rate as a difference of two concave functions. A globally optimum power allocation is found by applying a branch-and-bound algorithm to the new formulation. In principle, the algorithm partitions the feasible region recursively into subregions where for every subregion the objective function is upper and lower bounded. For each subregion, a linear program is applied for estimating the upper bound of the sum rate which is derived from a convex maximization formulation of the problem with piecewise linearly approximated constraints. The performance is investigated by system-level simulations. The results show that the proposed algorithm outperforms the known conventional suboptimum schemes. Furthermore, it is shown that the algorithm asymptotically converges to a globally optimum power allocation. [ABSTRACT FROM PUBLISHER]

This paper proposes a decentralized state-estimation approach that relies on an elaborated instance of the Lagrangian relaxation decomposition technique. The proposed algorithm does not require a central coordinator but just to moderate interchanges of information among neighboring regions, and exploits the structure of the problem to achieve a fast and accurate convergence. Additionally, a decentralized bad measurement identification procedure is developed, which is efficient and robust in terms of identifying bad measurements within regions and in border tie-lines. The accuracy and efficiency of the proposed procedures are assessed by a large number of simulations, which allows drawing statistically sound conclusions. [ABSTRACT FROM PUBLISHER]

In this paper, we employ selective bit mapping to improve the performance of the LDPC coded QAM scheme for terrestrial DTV broadcasting system. The threshold of message-passing decoding can be considerably lowered by selectively mapping the binary components of LDPC codeword to the positions in the m-tuples to be mapped into 2^mQAM symbols. In our approach, the mapping pattern is described by bit-mapping polynomials, based on which density evolution can be applied. The optimization algorithm is developed with two implementation concerns, using the Chinese DTMB standard as an example. Numerical results illustrate that our proposed approach can improve the decoding threshold by 0.05 dB to 0.499 dB depending on the code rate and the order of QAM modulation. Simulation results show that the actual BER improvement varies from 0.09 dB to 0.6 dB with different code-modulation combinations in both single-carrier and OFDM modes. [ABSTRACT FROM AUTHOR]

As the output power of photovoltaic (PV) array changes with the change of external environment and load, the maximum power point tracking (MPPT) technology is needed to bring the efficiency of PV device into full play. In this paper, the chaos search theory is first applied on the MPPT technology of PV system; the chaos search algorithm based on dual carrier increases the adequacy of chaos search and overcomes the blindness of traditional chaos search, thus improves the search efficiency and solves the problem of multiple MPP under partially shadowing conditions. Comparative tests show that the proposed method can track the step response quickly and accurately; at the same time get better optimization result. Simulation and experimental results showed the effectiveness and good performance of the proposed method. [ABSTRACT FROM AUTHOR]

High availability communication networks with very low failure rates are often designed by using physical diversity, i.e., the traffic between a given pair of nodes is routed by using several physically disjoint paths. The selection of the pair of routes that maximizes the connectivity of a node is not an easy problem, because such connectivity cannot be expressed as an additive function of the availability of links and nodes in the path pairs. Previous algorithms for searching the optimal route use additive costs, which can be a loose assumption either when high failure rates can be locally present, or when fully disjoints paths do not exist. In this paper, we construct a Bayesian network to encode the probabilistic relation between the connectivity of a node and the availability of nodes and links. The problem of selecting an optimal pair of routes becomes equivalent to optimizing the structure of the Bayesian network. By introducing appropriate approximations on the double route availability equations, we propose a new algorithm, which outperforms other classical methods when there are sporadic high error rate elements in the network. Simulations and an application example in an electric transport telecontrol network show the performance of the method when compared to standard search. [ABSTRACT FROM AUTHOR]

Speed control during startup is one of the most critical tasks of gas turbine power plant operation. This paper introduces the PI fuzzy gain-scheduling (PI-FGS) controller to solve the foremost speed-control problems, including tracking of the acceleration pattern and rejection of disturbances caused by operation events throughout startup. Fundamentally, the PI-FGS synthesizes a GS controller from multiple locally tuned generalized proportional integral (PI) algorithms by means of a fuzzy system. The PI-FGS structure permits independent tuning of the tracking and rejection responses at any operating point. In addition, tuning can be carried out on-site based on the operator experience and inspection of the current plant response. Simulation experiments show that the PI-FGS may improve speed-control performance well over that provided by commercially available speed controllers, which are based on a single conventional PI algorithm. [ABSTRACT FROM PUBLISHER]

Recently, foundations rooted in physics have been laid down for the goal of simulating the propagation of a guide wire inside the vasculature. At the heart of the simulation lies the fundamental task of energy minimization. The energy comes from interaction with the vessel wall and the bending of the guide wire. For the simulation to be useful in actual training, obtaining the smallest possible optimization time is key. In this paper, we, therefore, study the influence of using different optimization techniques: a semianalytical approximation algorithm, the conjugate-gradients algorithm, and an evolutionary algorithm (EA), specifically the GLIDE algorithm. Simulation performance has been measured on phantom data. The results show that a substantial reduction in time can be obtained while the error is increased only slightly if conjugate gradients or GLIDE is used. [ABSTRACT FROM AUTHOR]

Energy constraints have a significant impact on the design and operation of wireless sensor networks. This paper investigates the base station (BS) selection (or anycast) problem in wireless sensor networks. A wireless sensor network having multiple BSs (data sink nodes) is considered. Each source node must send all its locally generated data to only one of the BSs. To maximize network lifetime, it is essential to optimally match each source node to a particular BS and find an optimal routing solution. A polynomial time heuristic is proposed for optimal BS selection and anycast via a sequential fixing procedure. Through extensive simulation results, it is shown that this algorithm has excellent performance behavior and provides a near-optimal solution. [ABSTRACT FROM AUTHOR]

In this paper, we consider beamforming (BF) for cooperative networks with one multi—antenna source, multiple multi—antenna amplify—and—forward (AF) relays, and one single—antenna destination. The source BF vector and the AF—BF matrices at the relays are optimized for maximization of the signal—to—noise ratio (SNR) at the destination under three different power constraints. In particular, we consider individual relay power constraints, a joint relay power constraint, and a joint power constraint for the source and the relays. We solve the associated optimization problems in two stages. In the first stage, we find the optimal AF—BF matrices for a given BF vector at the source. For the cases of individual and joint relay power constraints, closed—form solutions for the AF—BF matrices are provided, respectively. Furthermore, for the case of a joint source—relay power constraint, the AF—BF matrices are obtained in closed form up to a scalar power allocation factor and an efficient numerical algorithm for the power allocation between the source and the relays is given. In the second stage, the optimal source BF vectors are computed. Thereby, we show that for the joint relay and the joint source—relay power constraints, the resulting problem can be transformed into a non—convex polynomial programming problem which allows for an exact solution for small—scale networks. For large—scale networks and networks with individual relay power constraints, we propose efficient suboptimal optimization methods for the source BF vector. Simulation results show the benefits of having multiple antennas at the source and/or multiple multi—antenna relays and illustrate the performance differences introduced by the three different power constraints. [ABSTRACT FROM AUTHOR]

In this paper, we consider the problem of resource allocation in the DFT-Spread-OFDMA (DFT-S-OFDMA) uplink. We show that the resource allocation problem can be formulated as a set packing problem, which in general is NP-hard. We propose polynomial-time message-passing based algorithms, one of which is guaranteed to yield a solution that is within a constant fraction of the optimal solution and is also asymptotically optimal in the limit as the number of subcarriers in the system goes to infinity. The message-passing based algorithm is also extended to solve the resource allocation problem over a multi-cell uplink in a distributed fashion. Our algorithms account for finite input alphabets and non-ideal practical outer codes. Extensive simulations are performed to assess the performance of the proposed algorithms and it is shown that they yield near-optimal solutions at a low complexity and with a low memory requirement. [ABSTRACT FROM PUBLISHER]