Search

Accurate knowledge of the vehicle states is the foundation of vehicle motion control. However, in real implementations, sensory signals are always corrupted by delays and noises. Network induced time-varying delays and measurement noises can be a hazard in the active safety of over-actuated electric vehicles (EVs). In this paper, a brain-inspired proprioceptive system based on state-of-the-art deep learning and data fusion technique is proposed to solve this problem in autonomous four-wheel actuated EVs. A deep recurrent neural network (RNN) is trained by the noisy and delayed measurement signals to make accurate predictions of the vehicle motion states. Then unscented Kalman predictor, which is the adaption of unscented Kalman filter in time-varying-delay situations, combines the predictions of the RNN and corrupted sensory signals to provide better perceptions of the locomotion. Simulations with a high-fidelity, CarSim, full-vehicle model are carried out to show the effectiveness of our RNN framework and the entire proprioceptive system. [ABSTRACT FROM AUTHOR]

This article establishes a novel electroencephalograph (EEG)-based brain–computer interface (BCI) system for ground vehicle control with potential application of mobility assistance to the disabled. To enable an intuitive motor imagery (MI) paradigm of “left,” “right,” “push,” and “pull,” a driving simulator based EEG data recording and automatic labeling platform is built for dataset making. In the preprocessing stage, a wavelet and canonical correlation analysis (CCA) combined method is used for artifact removal and improving signal-to-noise ratio. An ensemble learning based training and testing framework is proposed for MI EEG data classification. The average classification accuracy of proposed framework is about 91.75%. This approach essentially takes advantage of the common spatial pattern (CSP) with ability of extracting the feature of event-related potentials and the convolutional neural networks (CNNs) with powerful capacity of feature learning and classification. To convert the classification results of EEG data segments into motion control signals of ground vehicle, shared control strategy is used to realize the control command of “left-steering,” “right-steering,” “acceleration,” and “stop” considering collision avoidance with obstacles detected by a single-line LIDAR. The online experimental results on a model vehicle platform validate the significant performance of the established BCI system and reveal the application potential of BCI on the vehicle control and automation. [ABSTRACT FROM AUTHOR]

Reconstitution of control architecture creates a great challenge for distributed drive electric vehicles (DDEV), due to the emergence of a new distributed driving strategy. To this end, a novel distributed control architecture is proposed in this paper for integrated control of active front steering (AFS) system and direct yaw moment (DYC) system. First, a multi-agent system (MAS) is employed to construct a general framework, where AFS and DYC act as agents that work together to improve vehicle lateral stability and simultaneously reduce workloads of drivers during path tracking. The cooperative control strategies of two agents are obtained through Pareto-optimality theory to ensure optimal control performance of AFS and DYC. Then, on the basis of dynamic interaction between agents, terminal constraints, including terminal cost function and terminal input with local static feedback, are designed to guarantee the asymptotic stability of the close-loop system. Finally, virtual simulations are conducted to evaluate the proposed controller. The results indicate that the proposed control architecture can effectively preserve vehicle stability and reduce workloads of drivers, especially for the inexperienced driver. Furthermore, the hardware-in-loop (HIL) test results also demonstrate the feasibility of the proposed controller. [ABSTRACT FROM AUTHOR]

This paper presents an integrated platoon control framework for heterogeneous vehicles on curved roads with varying slopes, aerodynamic drag, and wireless communication delays. First, a linear heterogeneous vehicle platoon model with decoupled longitudinal and lateral dynamics is built based on nonlinear feedback linearization and arc-length parametric transformation of an arbitrary curved road. The external disturbances are also considered, including the up-down road slopes, wind and equivalent time-delays caused by the wireless communication delay and discrete data in onboard sensors. Second, to achieve stable platoon control on a curved road, the platoon uses the state-feedback control method in the longitudinal direction while each vehicle tracks the centerline of the curved road to realize lateral control. Longitudinally, an $ H_\infty$ platoon controller is designed based on the Lyapunov-Krasovskii functional to ensure the inner-vehicle and string stability of the platoon, which suffers from parameter uncertainty, and external disturbances. Additionally, the $ \mathcal {L}_2$ string stability is defined to guarantee that the perturbations do not grow unbounded as they propagate through the platoon. Simulation results indicate that the proposed robust controller achieves proper platoon intervehicle spacing in both the longitudinal and lateral directions. [ABSTRACT FROM AUTHOR]

The accurate knowledge of tire–road friction coefficient (TRFC) contributes to the optimization of driver maneuvers for further improving the safety of intelligent vehicles. The performance of the existing estimation methods would decline when a vehicle performs complex driving maneuvers. In addition, the mass parameter mismatch also deteriorates the estimation accuracy of TRFC. To address these problems, in this article, an integrated scheme for TRFC estimation is proposed by combining a strong tracking unscented Kalman filter and an interactive multiple model unscented Kalman filter. Real-time experiments are implemented on a mass-produced vehicle to demonstrate the feasibility and effectiveness of the proposed method. The results show that the proposed approach has better estimation accuracy than the existing ones under various driving scenarios. [ABSTRACT FROM AUTHOR]

This paper presents a stochastic stable control protocol for heterogeneous vehicle platoon subject to communication topologies change, external disturbance, and information delay. First, a random vehicle platoon system composed entirely of several pure electric vehicles is built. The random variation of data transmission link among the platoon in a natural traffic environment is considered and molded by the Markov chain combined with the directed graph method. The influence of delays and discrete data in wireless communication, road slope, and air resistance on the vehicle platoon is also considered by introducing the external interferences and equivalent information delays. Additionally, to ensure the vehicle platoon’s inner-vehicle stability, the variable-gain distributed controller is proposed based on the Markovian jumping system stability theory and $ H_\infty$ control. Finally, the $ \mathcal {L}_{2}$ stochastic string stability is defined to attenuate perturbations as they propagate through the platoon. Simulation studies about a vehicle platoon under four communication topologies random switching with two different control methods are provided to verify the theoretical result. It is shown that, compared to traditional platoon robust control, it is possible to achieve the vehicle platoon’s stability even if in the continuous mutation of unstable topologies by using the proposed control approach. [ABSTRACT FROM AUTHOR]

The accurate information of sideslip angle (SA) and tire cornering stiffness (TCS) is essential for advanced chassis control systems. However, SA and TCS cannot be directly measured by in-vehicle sensors. Thus, it is a hot topic to estimate SA and TCS with only in-vehicle sensors by an effective estimation method. In this article, we propose a novel fuzzy adaptive robust cubature Kalman filter (FARCKF) to accurately estimate SA and TCS. The model parameters of the FARCKF are dynamically updated using recursive least squares. A Takagi–Sugeno fuzzy system is developed to dynamically adjust the process noise parameter in the FARCKF. Finally, the performance of FARCKF is demonstrated via both simulation and experimental tests. The test results indicate that the estimation accuracy of SA and TCS is higher than that of the existing methods. Specifically, the estimation accuracy of SA is at least improved by more than 48%, while the estimators of TCS are closer to the reference values. [ABSTRACT FROM AUTHOR]

Path planning is a critical part for improving the driving safety and driver comfort of autonomous vehicles (AVs), especially in complex maneuvering conditions. In addition, different drivers have different preferences for AVs, thus, how to provide personalized trajectories for different drivers is a vital issue for AVs. The collision-free path planning problem in conditions with large road curvatures is investigated in this paper, with the consideration of environmental safety constraints, drivers’ comfort, vehicle actuator constraints, etc. Firstly, a Driver-Vehicle-Road (DVR) system is established based on the combination of the kinematic vehicle model and the two-point visual preview driver model, such that the driver's individual handling characteristics can be considered in the controller. The kinematic vehicle model is modified to have the similar understeering characteristics with those of the nonlinear full car models, and then the proposed DVR system can satisfy different groups of drivers and cars. Secondly, for environmental constraints, a new artificial potential field (APF) method is proposed, which can form a banana-shaped 3-D dangerous imaginary mountain and a lane boundary cliff suitable for arbitrary curvature roads to generate a collision-free evasive path. Finally, the Linear-Time-Varying (LTV) model predictive control (MPC) method is adopted to design the path planner. The CarSim-Simulink joint simulation illustrates that with the proposed planner, the host vehicle is capable of avoiding obstacles with a safer and more comfortable maneuver on large curvature roads. And the proposed path planner can provide individually safe trajectories for different drivers with good maneuverability. [ABSTRACT FROM AUTHOR]

Long queues of vehicles are often found at signalized intersections, which increases the energy consumption of all the vehicles involved. This paper proposes an enhanced eco-approach control (EEAC) strategy with consideration of the queue ahead for connected electric vehicles (EVs) at a signalized intersection. The discharge movement of the vehicle queue is predicted by an improved queue discharge prediction method (IQDP), which takes both vehicle and driver dynamics into account. Based on the prediction of the queue, the EEAC strategy is designed with a hierarchical framework: the upper-stage uses dynamic programming to find the general trend of the energy-efficient speed profile, which is followed by the lower-stage model predictive controller to computes the explicit solution for a short horizon with guaranteed safe inter-vehicular distance. Finally, numerical simulations are conducted to demonstrate the energy efficiency improvement of the EEAC strategy. Besides, the effects of the queue prediction accuracy on the performance of the EEAC strategy are also investigated. [ABSTRACT FROM AUTHOR]