Search

Landslides are a common geological disaster, which cause many economic losses and casualties in the world each year. Drawing up a landslide list and monitoring their deformations is crucial to prevent landslide disasters. Interferometric synthetic aperture radar (InSAR) can obtain millimeter-level surface deformations and provide data support for landslide deformation monitoring. However, some landslides are difficult to detect due to the low-coherence caused by vegetation cover in mountainous areas and the difficulty of phase unwrapping caused by large landslide deformations. In this paper, a method based on multi-direction phase gradient stacking is proposed. It employs the differential interferograms of small baseline sets to directly obtain the abnormal region, thereby avoiding the problem where part of landslide cannot be detected due to a phase unwrapping error. In this study, the Sentinel-1 satellite ascending and descending data from 2018 to 2020 are used to detect landslides around Zhouqu County, China. A total of 26 active landslides were detected in ascending data and 32 active landslides in the descending data using the method in this paper, while the SBAS-InSAR detected 19 active landslides in the ascending data and 25 active landslides in the descending data. The method in this paper can successfully detect landslides in areas that are difficult for the SBAS-InSAR to detect. In addition, the proposed method does not require phase unwrapping, so a significant amount of data processing time can be saved. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

Corn is an important food crop worldwide, and its yield is directly related to Chinese food security. Accurate remote sensing extraction of corn can realize the rational application of land resources, which is of great significance to the sustainable development of modern agriculture. In the field of large-scale crop remote sensing classification, single-period optical remote sensing images often cannot achieve high-precision classification. To improve classification accuracy, multiple time series image combinations have gradually been adopted. However, due to the influence of cloudy and rainy weather, it is often difficult to obtain complete time series optical images. Synthetic aperture radar (SAR) data are imaged by microwaves, which have strong penetrating power and are not affected by clouds. A critical way to solve this problem is to use SAR images to compensate for the lack of optical images and obtain a complete time series image in the corn-growing season. However, SAR images have limited wavelengths and cannot provide important wavelengths, such as visible light bands and near-infrared information. To solve this problem, this study took Zhaodong City, a vital corn-planting base in China, as the research area; took GF-6/GF-3 and Sentinel-1/Sentinel-2 as remote sensing data sources; designed12 classification scenarios; analyzed the best classification period and the best time series combination of corn classification; studied the influence of SAR images on the classification results of time series images; and compared the classification differences between GF-6/GF-3 and Sentinel-1/Sentinel-2. The results show that the classification accuracy of time series combinations is much higher than that of single-period images. The polarization characteristics of SAR images can improve the classification accuracy with time series images. The classification accuracy of GF series images from China is obviously higher than that of Sentinel series images. The research performed in this paper can provide a reference for agricultural classification by using remote sensing data. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

Groundwater overexploitation and loading of buildings have been the main factors triggering land subsidence along the west coast of Bohai Bay, China, since the 2000s. Uneven subsidence has been causing damage to buildings and civil facilities, loss of elevation, increasing the risk of flood and seawater intrusion, and threatening the safety of people's lives and property. This paper analyzed the spatial and temporal features of land subsidence along the coastal area from 2003 to 2010 and from 2015 to 2020, respectively. The relations between the initiating factors and land subsidence were explored. Then, the simulation model of land subsidence was constructed through a deep learning method. During the process, multiple data were collected, including land satellite (Landsat), environmental satellite advanced synthetic aperture radar (ENVISAT ASAR) and Sentinel-1 images, leveling data, lithological data, and groundwater level data. The area occupied by buildings and vertical displacement were extracted by using supervised classification, small baseline subset (SBAS), and persistent scatterer interferometry (PSI) technologies. The gated recurrent unit (GRU) neural network was adopted to simulate the evolution of land subsidence. Results showed that the maximum annual vertical displacement rate decreased from −94 mm/yr during 2003–2010 to −87 mm/yr during 2015–2020. The correlation efficiency between the groundwater level of the third confined aquifer group and land subsidence was larger than the area occupied by buildings and the compressible layer thickness with subsidence. The constructed GRU neural network model can simulate subsidence from September 2019 to December 2019, with the overall RMSE and MAE being 3.16 mm and 2.19 mm, respectively. This work can facilitate an understanding of the evolution and prevention of land subsidence along the west coast of Bohai Bay, which will provide information for policy decisions and flood-fighting plans of the worldwide coastal cities. [ABSTRACT FROM AUTHOR]

Dalian Jinzhou Bay International Airport (DJBIA) is an offshore artificial island airport, where the reclaimed land is prone to uneven land subsidence due to filling consolidation and construction. Monitoring and predicting the subsidence are essential to assist the subsequent subsidence control and ensure the operational safety of DJBIA. However, the accurate monitoring and prediction of reclaimed subsidence for such a wide area under construction are hard and challenging. This paper utilized the Small Baseline Subset Synthetic Aperture Radar (SBAS-InSAR) technology based on Sentinel-1 images from 2017 to 2021 to obtain the subsidence over the land reclamation area of the DJBIA, in which the results from ascending and descending orbit data were compared to verify the reliability of the results. The SBAS-InSAR results reveal that uneven subsidence is continuously occurring, especially on the runway, terminal, and building area of the airport, with the maximum subsidence rate exceeding 100 mm/year. It was found that there is a strong correlation between the subsidence rate and backfilling time. This study provides important information on the reclaimed subsidence for DJBIA and demonstrates a novel method for reclaimed subsidence monitoring and prediction by integrating the advanced InSAR technology and Terzaghi Consolidation Theory modeling. Moreover, based on the Terzaghi consolidation theory and the corresponding geological parameters of the airport, predicted subsidence curves in this area are derived. The comparison between predicted curves and the actual subsidence revealed by InSAR in 2017–2021 is highly consistent, with a similar trend and falling in a range of ±25 mm/year, which verifies that the subsidence in this area conforms to Terzaghi Consolidation Theory. Therefore, it can be predicted that in the future, the subsidence rate of the new reclamation area in this region will reach about 80 mm/year ± 25 mm/year, and the subsidence rate will gradually slow down with the accumulation of reclamation time. The subsidence rate will slow down to about 30 mm/year ± 25 mm/year after 10 years. [ABSTRACT FROM AUTHOR]

The southwest mountainous area of China is one of the areas with the most landslides in the world. In this paper, we used Ya'an City and Garzê Tibetan Autonomous Prefecture in Sichuan Province as the research areas to explore the identification application effects of large-area potential landslides using synthetic aperture radar (SAR) data with different wavelength types (Sentinel-1, ALOS-2), different processing methods (SBAS-InSAR, Stacking-InSAR), and different geological environmental conditions. The results show the following: (1) The effect of identifying landslides with different slope directions is largely affected by the satellite orbit direction; when we identify landslide hazards across a large area, the joint monitoring mode of ascending and descending orbit data is required. (2) The period of monitoring affects the identification effect of potential landslides when landslide identification is carried out in southwestern China; the InSAR monitoring period is recommended to be more than 2 years. (3) In different geological environmental regions, SBAS technology and Stacking technology have their own advantages; Stacking technology identifies more potential landslides, and SBAS technology identifies potential landslides with higher accuracy; (4) the degree of vegetation coverage has a great impact on the landslide identification effect of different SAR data sources. In low-density vegetation coverage areas, the landslide identification result using Sentinel-1 data seems to be better than the result using ALOS-2 data. In high-density vegetation coverage areas, the landslide identification result using ALOS-2 data is better than that using Sentinel-1 data. [ABSTRACT FROM AUTHOR]

Landslides, a major natural geohazard, obstruct municipal constructions and may destroy villages and towns, at worst causing significant casualties and economic losses. Interferometric Synthetic Aperture Radar (InSAR) technique offers distinct advantages on landslide detection and monitoring. In this paper, a more systematic workflow is designed for InSAR study of landslides, in terms of three levels: (i) early detection on regional scale, (ii) three-dimensional (3D) surface displacement rates estimation on detailed scale, and (iii) time series analysis on long-term temporal scale. The proposed workflow is applied for landslide research on the Xiaojiang River Basin, China, using ascending and descending Sentinel-1 images acquired from March 2017 to May 2019. First, the landslide inventory has been mapped and updated using InSAR stacking method, supporting geohazard prevention on a regional scale. A total of 22 active landslides are identified, ranging from medium to super large scale. Compared with the existing inventory, three unrecorded landslides are newly detected by our approach, and five recorded landslides are detected significant expansion of their boundaries. Then, specific to a detected landslide, Baobao landslide, a Total Least Squares–Kalman Filter-based approach is presented. Two outcomes are provided for further spatial-temporal pattern analysis: 3D displacement rates, providing an intuitive insight on the spatial characteristics and sliding direction of landslide, which are analyzed to deep the understanding of its kinematic mechanism, and long-term time series, which contribute to deduce the dynamic evolution of landslide, presenting benefits in landslide forecasting. [ABSTRACT FROM AUTHOR]

The Xiaolangdi Dam is a key project for the control and development of the Yellow River. It bears the functions of flood control, controlling water and sediment in the lower reaches, ice prevention, industrial and agricultural water supply, power generation, and so on. Its safety is related to people's life and property safety and local economic and social development. It is of great significance to carry out comprehensive and regular deformation monitoring for dams since the deformation is an important evaluation index for dam safety. Interferometric Synthetic Aperture Radar (InSAR) technology has been a rapidly evolving technology in the field of space geodesy in recent years. It offers advantages such as high monitoring precision, extensive coverage, and high monitoring point density, making it a powerful tool for monitoring deformations in hydraulic engineering projects. Based on Sentinel-1 data covering the Xiaolangdi Dam from September 2020 to November 2022, the PS-InSAR technique was used to obtain the surface deformation of the Xiaolangdi Dam, and reservoir water level data on image acquisition dates were obtained for joint analysis. The results show that there is a large deformation in the center of the dam crest of the Xiaolangdi Dam, while both sides of the slope and downstream dam foot are relatively stable. The time series deformation of the dam body is closely related to the reservoir water level change. When the water level increases, the dam body tends to deform downstream; when the water level decreases, the dam body tends to deform upstream. The deformation and water level of the Xiaolangdi Dam exhibit a clear negative correlation. There is no significant cumulative deformation on the dam slopes or at the base of the dam. However, cumulative deformation occurs over time in the central area of the dam's crest. The deformation process at the central area of the dam's crest follows a continuous and non-disruptive pattern, which is consistent with the typical deformation behavior of the Xiaolangdi earth–rock dam structure. Therefore, it is judged that the current deformation of the Xiaolangdi Dam does not impact the safe operation of the dam. InSAR technology enables the rapid acquisition of high-precision, high-density deformation information on the surfaces of reservoir dams. With an increasing number of radar satellites in various frequency bands, such as Sentinel-1 and TerraSAR-X, there is now an ample supply of available data sources for InSAR applications. Consequently, InSAR technology can be extended to routine monitoring applications for reservoir dam deformations, especially for small and medium-sized reservoirs that may not be equipped with ground measurement tools like GNSS. This holds significant importance and potential for enhancing the safety monitoring of such reservoirs. [ABSTRACT FROM AUTHOR]

Grasslands are one of the most important terrestrial ecosystems on the planet and have significant economic and ecological value. Accurate and rapid discrimination of grassland communities is critical to the conservation and utilization of grassland resources. Previous studies that explored grassland communities were mainly based on field surveys or airborne hyperspectral and high-resolution imagery. Limited by workload and cost, these methods are typically suitable for small areas. Spaceborne mid-resolution RS images (e.g., Sentinel, Landsat) have been widely used for large-scale vegetation observations owing to their large swath width. However, there still keep challenges in accurately distinguishing between different grassland communities using these images because of the strong spectral similarity of different communities and the suboptimal performance of models used for classification. To address this issue, this paper proposed a superpixel-based grassland community classification method using Genetic Programming (GP)-optimized classification model with Sentinel-2 multispectral bands, their derived vegetation indices (VIs) and textural features, and Sentinel-1 Synthetic Aperture Radar (SAR) bands and the derived textural features. The proposed method was evaluated in the Siziwang grassland of China. Our results showed that the addition of VIs and textures, as well as the use of GP-optimized classification models, can significantly contribute to distinguishing grassland communities, and the proposed approach classified the seven communities in Siziwang grassland with an overall accuracy of 84.21% and a kappa coefficient of 0.81. We concluded that the classification method proposed in this paper is capable of distinguishing grassland communities with high accuracy at a regional scale. [ABSTRACT FROM AUTHOR]

Earth Observation (EO) data is a critical information source for mapping and monitoring water resources over large inaccessible regions where hydrological in-situ networks are sparse. In this paper, we present a simple yet robust method for fusing optical and Synthetic Aperture Radar (SAR) data for mapping surface water dynamics over mainland China. This method uses a multivariate logistic regression model to estimate monthly surface water extent over a four-year period (2017 to 2020) from the combined usages of Sentinel-1, Sentinel-2 and Landsat-8 imagery. Multi-seasonal high-resolution images from the Chinese Gaofen satellites are used as a reference for an independent validation showing a high degree of agreement (overall accuracy 94%) across a diversity of climatic and physiographic regions demonstrating potential scalability beyond China. Through inter-comparison with similar global scale products, this paper further shows how this new mapping technique provides improved spatio-temporal characterization of inland water bodies, and for better capturing smaller water bodies (< 0.81 ha in size). The relevance of the results is discussed, and we find this new enhanced monitoring approach has the potential to advance the use of Earth observation for water resource management, planning and reporting. [ABSTRACT FROM AUTHOR]

Deformation monitoring plays a pivotal role in assessing dam safety. Interferometric Synthetic Aperture Radar (InSAR) has the advantage of obtaining an extensive range of deformation, regardless of weather conditions. The Datengxia Water Conservancy Hub is the largest in-construction dam in China. To effectively assess the in-construction dam safety, the SBAS-InSAR (Small Baseline Subset-InSAR) technique and 86 Sentinel-1 images (from 11 February 2020, to 16 January 2023) have been employed in this study to monitor the deformation over the reservoir and its surrounding areas. The reliability of the SBAS-InSAR monitoring results over the study area was demonstrated by the in situ monitoring results. And the InSAR results show that the central section of the left dam exhibits the most substantial cumulative deformation, attributed to the maximal water pressure. This is closely followed by the left end of the dam, which reflects a similar but smaller deformation. However, the in-construction cofferdam facilities make the right-end section of the left dam more robust, and the deformation is the most stable. Additionally, significant deformation of the auxiliary dam slope has been identified. Moreover, the analysis indicated that the deformation of the four upstream slopes is closely related to the precipitation, which potentially poses a threat to the safety of the Datengxia Dam. [ABSTRACT FROM AUTHOR]

South China is dominated by mountainous agriculture and croplands that are at risk of flood disasters, posing a great threat to food security. Synthetic aperture radar (SAR) has the advantage of being all-weather, with the ability to penetrate clouds and monitor cropland inundation information. However, SAR data may be interfered with by noise, i.e., radar shadows and permanent water bodies. Existing cropland data derived from open-access landcover data are not accurate enough to mask out these noises mainly due to insufficient spatial resolution. This study proposed a method that extracted cropland inundation with a high spatial resolution cropland mask. First, the Proportional–Integral–Derivative Network (PIDNet) was applied to the sub-meter-level imagery to identify cropland areas. Then, Sentinel-1 dual-polarized water index (SDWI) and change detection (CD) were used to identify flood area from open water bodies. A case study was conducted in Fujian province, China, which endured several heavy rainfalls in summer 2022. The result of the Intersection over Union (IoU) of the extracted cropland data reached 89.38%, and the F1-score of cropland inundation achieved 82.35%. The proposed method provides support for agricultural disaster assessment and disaster emergency monitoring. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar interferometry (InSAR) has emerged as an effective technique for monitoring potentially unstable landslides and has found widespread application. Nevertheless, in mountainous reservoir regions, the precision of time-series InSAR outcomes is often constrained by topography-dependent atmospheric delay (TDAD) effects. To address this limitation, we propose a novel InSAR time-series method that integrates TDAD correction. This approach employs advanced deep learning algorithms to individually model and mitigate TDAD for each interferogram, thereby enhancing the accuracy of small baseline subset InSAR (SBAS-InSAR) and stacking InSAR time-series analyses. Utilizing Sentinel-1 data, we apply this method to identify potential landslides in the Baihetan reservoir area, located in southwestern China, where we successfully identified 26 potential landslide sites. Comparative experimental results demonstrate a significant reduction (averaging 70% and reaching up to 90%) in phase standard deviation (StdDev) in the corrected interferograms, indicating a marked decrease in phase–topography correlation. Furthermore, the corrected time-series InSAR results effectively remove TDAD signals, leading to clearer displacement boundaries and a remarkable reduction in other spurious displacement signals. Overall, this method efficiently addresses TDAD in time-series InSAR, enabling precise identification of potentially unstable landslides influenced by TDAD, and providing essential technical support for early landslide hazard detection using time-series InSAR. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) panels convert sunlight into electricity, and play a crucial role in energy decarbonization, and in promoting urban resources and environmental sustainability. The area of PV panels in China's coastal regions is rapidly increasing, due to the huge demand for renewable energy. However, a rapid, accurate, and robust PV panel mapping approach, and a practical PV panel classification strategy for large-scale applications have not been established. Here, we developed a new approach that uses spectral and textural features to identify and map the PV panels there were in coastal China in 2021 using multispectral instrument (MSI) and synthetic aperture radar (SAR) images, and the Google Earth Engine (GEE), to differentiate PV panels according to their underlying surface properties. Our 10-m-spatial-resolution PV panel map had an overall accuracy of 94.31% in 2021. There was 510.78 km2 of PV panels in coastal China in 2021, which included 254.47 km2 of planar photovoltaic (PPV) panels, 170.70 km2 of slope photovoltaic (SPV) panels, and 85.61 km2 of water photovoltaic (WPV) panels. Our resultant PV panel map provides a detailed dataset for renewable layouts, ecological assessments, and the energy-related Sustainable Development Goals (SDGs). [ABSTRACT FROM AUTHOR]

A series of small-magnitude earthquakes (Mw 2.9~Mw 4.9) occurred in Rong County, Sichuan Province, China between 30 March 2018 and December 2020, which threatened the safety of local residents. Determining the surface displacement and estimating the damage caused by these earthquakes are significant for earthquake relief, post-earthquake disaster assessment and hazard elimination. This paper integrates the Generic Atmospheric Correction Online Service (GACOS) with interferometry synthetic aperture radar (InSAR) to accurately detect the displacement of the series of small-magnitude earthquakes in Rong County based on 45 Sentinel-1 ascending/descending images acquired from January 2018 to December 2020. We analyze the influence of some factors involved in surface displacement, including earthquake magnitude, focal depth and the distance from the epicenter to the fault. The above measurement for small-magnitude earthquakes and statistics analysis for the displacement have not been performed before, so this can help better understand the displacement features of small-magnitude earthquakes, which are important for post-earthquake hazard assessment and disaster prevention. [ABSTRACT FROM AUTHOR]

Landslide disasters occur frequently in the mountainous areas in southwest China, which pose serious threats to the local residents. Interferometry Synthetic Aperture Radar (InSAR) provides us the ability to identify active slopes as potential landslides in vast mountainous areas, to help prevent and mitigate the disasters. Quickly and accurately identifying potential landslides based on massive SAR data is of great significance. Taking the national highway near Wenchuan County, China, as study area, this paper used a Stacking-InSAR method to quickly and qualitatively identify potential landslides based on a total of 40 Sentinel SAR images acquired from November 2017 to March 2019. As a result, 72 active slopes were successfully detected as potential landslides. By comparing the results from Stacking-InSAR with the results from the traditional SBAS-InSAR (Small Baselines Subset) time series method, it was found that the two methods had a high consistency, with 81.7% potential landslides identified by both of the two methods. A detailed comparison on the detection differences was performed, revealing that Stacking-InSAR, compared to SBAS-InSAR may miss a few active slopes with small spatial scales, small displacement levels and the ones affected by the atmosphere, while it has good performance on poor-coherence regions, with the advantages of low technical requirements and low computation labor. The Stacking-InSAR method would be a fast and powerful method to qualitatively and effectively identify potential landslides in vast mountainous areas, with a comprehensive understanding of its specialty and limitations. [ABSTRACT FROM AUTHOR]

The Sichuan–Tibet Railway (STR) is currently under construction and serves as an important transportation route in western China. Identifying potential geohazards along the route is important for project construction. However, research on the frozen soil of the Western Sichuan Plateau, and on frozen soil identification using interferometric synthetic aperture radar (InSAR) is relatively negligible. As a low-cost, all-weather spatial geodesy tool, InSAR is frequently used for geohazard identification. We selected a study area located along the Litang section of the STR, starting from Litang County in the east and extending 60 km to the west. The geological conditions along the line are complex, with numerous fault zones and hidden danger points for landslide. To identify unstable slopes along the line, distribute scatterer InSAR (DS-InSAR) was used to obtain surface displacement information from 2018 to 2021. Based on the displacement information obtained from the ascending and descending orbit images from Sentinel-1, a spatial density clustering method identified 377 and 388 unstable slopes in the study area, respectively, of these, 132 were consistent. The identified unstable slopes were mostly located in areas with a relatively high altitude and moderate slope. The Luanshibao landslide, which is a typical landslide in the study area, had notable signs of displacement, where the displacement rate along the back edge of the landslide can reach 20 mm/a. An inversion method for the seasonal frozen soil area distribution was proposed based on the periodic subsidence and uplift model and time-series monitoring data; the calculated seasonal freeze–thaw amplitude exceeded 20 mm. Further analysis revealed a 2-month lag in the response of the freeze–thaw phenomenon to the air temperature. This study demonstrated that DS-InSAR offers optimal surface displacement data, which can provide an important basis to identify engineering geological hazards. [ABSTRACT FROM AUTHOR]

With the rapid development of urbanization, timely and accurate information on the spatial distribution of urban areas is essential for urban planning, environmental protection and sustainable urban development. To date, the main problem of urban mapping using synthetic aperture radar (SAR) data are that nonbuilding objects with high backscattering cause high false alarms, while small-scale buildings with low backscattering result in omission errors. In this paper, a robust building-area extraction extractor is proposed to solve the above problems. The specific work includes (1) building a multiscale and multicategory building area dataset to learn enough building features in various areas; (2) designing a multiscale extraction network based on the residual convolutional block (ResNet50) and a pyramid-based pooling module to extract more discriminative features of building areas and introducing the focal loss item as the object function of the network to further extract the small-scale building areas and (3) eliminating the false alarms using the Normalized Difference Vegetation Index (NDVI) and Modified Normalized Difference Water Index (MNDWI) index. GF-3 SAR data with a 10-m resolution of four regions in China are used to validate our method, and the regional building-area mapping results with overall accuracy above 85% and kappa coefficient not less than 0.73 are obtained. Compared with the current popular networks and the global human settlement layer (GHSL) product, our method shows better extraction results and higher accuracy in multiscale building areas. The experiments using Sentinel-1 and ALOS-2/PALSAR-2 data show that the proposed method has good robustness with different SAR data sources. [ABSTRACT FROM AUTHOR]

On 20 July 2021, an extraordinary rainfall event occurred in Henan Province, China, resulting in heavy waterlogging, flooding, and hundreds of fatalities and causing considerable property damage. Because the damaged region was a major grain-producing region of China, assessing crop food production losses following this event is very important. Because the crop rotation production system is utilized in the region to accommodate two crops per year, it is very valuable to accurately identify the types of crops affected by the event and to assess the crop production losses separately; however, the results obtained using these methods are still inadequate. In this study, we used China's first commercial synthetic aperture radar (SAR) data source, named Hisea-1, together with other open-source and widely used remote sensing data (Sentinel-1 and Sentinel 2), to monitor this catastrophic flood. Both the modified normalized difference water index (MNDWI) and Sentinel-1 dual-polarized water index (SDWI) were calculated, and an unsupervised classification (k-means) method was adopted for rapid water body extraction. Based on time-series datasets synthesized from multiple sources, we obtained four flooding characteristics, including the flooded area, flood duration, and start and end times of flooding. Then, according to these characteristics, we conducted a more precise analysis of the damages to flooded farmlands. We used the Google Earth Engine (GEE) platform to obtain normalized difference vegetation index (NDVI) time-series data for the disaster year and normal years and overlaid the flooded areas to extract the effects of flooding on crop species. According to the statistics from previous years, we calculated the areas and types of damaged crops and the yield reduction amounts. Our results showed that (1) the study area endured two floods in July and September of 2021; (2) the maximum areas affected by these two flooding events were 380.2 km2 and 215.6 km2, respectively; (3) the floods significantly affected winter wheat and summer grain (maize or soybean), affecting areas of 106.4 km2 and 263.3 km2, respectively; and (4) the crop production reductions in the affected area were 18,708 t for winter wheat and 160,000 t for maize or soybean. These findings indicate that the temporal-dimension information, as opposed to the traditional use of the affected area and the yield per unit area when estimating food losses, is very important for accurately estimating damaged crop types and yield reductions. Time-series remote sensing data, especially SAR remote sensing data, which have the advantage of penetrating clouds and rain, play an important role in remotely sensed disaster monitoring. Hisea-1 data, with a high spatial resolution and first flood-monitoring capabilities, show their value in this study and have the potential for increased usage in further studies, such as urban flooding research. As such, the approach proposed herein is worth expanding to other applications, such as studies of water resource management and lake/wetland hydrological changes. [ABSTRACT FROM AUTHOR]

On 22 July 2020, an Mw 6.3 earthquake occurred in Nima County, central Qinghai-Tibet Plateau, China. We used the synthetic aperture radar interferometry (InSAR) technique with Sentinel-1 images to retrieve the line of sight (LOS) coseismic deformation fields which indicate that the maximum surface displacement reached ~30 cm. We then processed a series of interferograms spanning one year after the Nima earthquake with the Small Baseline Subset Interferometric SAR (SBAS-InSAR) technique. The maximum cumulative postseismic LOS surface displacement reached ~8 cm and approximately followed a logarithmic function over time. The inversion of the fault geometry and co- and afterslip distribution shows that the epicenter location was (33.18°N, 86.88°E) at a depth of 7.4 km, and the causative fault had an N29.1°E strike and 50.2° dip. The most coseismic slip was concentrated at depths between 3 to 12 km with a peak value of 2.0 m at 7.4 km, whilst most afterslips were concentrated at depths between 0 to 12 km with a peak value of 0.2 m at 5 km. The postseismic moment energy was about 5.04 × 1017 N∙m 308 days after the event, which was approximately 13.8% of the coseismic moment energy. By analyzing the contribution of afterslip and poroelastic rebound to postseismic deformation, it was concluded that afterslip was the main early postseismic deformation mechanism. Future attention should be paid to the northern segment of the West Yibug Caka fault and East Yibug Caka fault. [ABSTRACT FROM AUTHOR]

Accurate measurement of underwater topography in the coastal zone is essential for human marine activities, and the synthetic aperture radar (SAR) presents a completely new solution. However, underwater topography detection using a single SAR image is vulnerable to the interference of sea state and sensor noise, which reduces the detection accuracy. A new underwater topography detection method based on multi-source SAR (MSSTD) was proposed in this study to improve the detection precision. GF-3, Sentinel-1, ALOS PALSAR, and ENVISAT ASAR data were used to verify the sea area of Dazhou Island. The detection result was in good agreement with the chart data (MAE of 2.9 m and correlation coefficient of 0.93), and the detection accuracy was improved over that of a single SAR image. GF-3 image with 3 m spatial resolution performed best in bathymetry among the four SAR images. Additionally, the resolution of the SAR image had greater influence on bathymetry compared with polarization and radar band. The ability of MSSTD has been proved in our work. Collaborative multi-source satellite observation is a feasible and effective scheme in marine research, but its application potential in underwater topography detection still requires further exploration. [ABSTRACT FROM AUTHOR]

Built-up area (BA) extraction using synthetic aperture radar (SAR) data has emerged as a potential method in urban research. Currently, typical deep-learning-based BA extractors show high false-alarm rates in the layover areas and subsurface bedrock, which ignore the surrounding information and cannot be directly applied to large-scale BA mapping. To solve the above problems, a novel transformer-based BA extraction framework for SAR images is proposed. Inspired by SegFormer, we designed a BA extractor with multi-level dual-attention transformer encoders. First, the hybrid dilated convolution (HDC) patch-embedding module keeps the surrounding information of the input patches. Second, the channel self-attention module is designed for dual-attention transformer encoders and global modeling. The multi-level structure is employed to produce the coarse-to-fine semantic feature map of BAs. About 1100 scenes of Gaofen-3 (GF-3) data and 200 scenes of Sentinel-1 data were used in the experiment. Compared to UNet, PSPNet, and SegFormer, our model achieved an 85.35% mean intersection over union (mIoU) and 94.75% mean average precision (mAP) on the test set. The proposed framework achieved the best results in both mountainous and plain terrains. The experiments using Sentinel-1 shows that the proposed method has a good generalization ability with different SAR data sources. Finally, the BA map of China for 2020 was obtained with an overall accuracy of about 86%, which shows high consistency with the global urban footprint. The above experiments proved the effectiveness and robustness of the proposed framework in large-scale BA mapping. [ABSTRACT FROM AUTHOR]

Ankang Airport is constructed on an expansive soil-fill platform in Shaanxi Province, Central China. Since its completion in 2020, it has suffered surface deformation caused by the consolidation and settlement of the fill layer and instability of the expansive soil slope. Exploring the special deformation law of expansive soil regions by remote sensing and analyzing the deformation characteristics of airports in mountainous areas have always been key issues in related disaster research. Based on the intensity and phase observation data of 37 Sentinel-1 synthetic aperture radar images, this study obtained the spatio-temporal distribution of the deformation of Ankang Airport from May 2020 to October 2021. First, phase optimization was performed on the original interferograms. Second, the persistent scatterer synthetic aperture radar interferometry (PS-InSAR) method was applied to extract the surface deformation information of Ankang Airport, and the accuracy was evaluated. Finally, the singular spectrum analysis method was introduced to jointly analyze the deformation information obtained by the InSAR technology in combination with geological and climatic data. The results show that the excavation area of Ankang Airport was basically stable, the filling area had obvious surface and uneven deformation, and the expansive soil fill slope exhibits deformation characteristics strongly related to slope, rainfall, and fill depth. The deformation was mainly caused by consolidation and settlement, supplemented by the expansion and shrinkage deformation of the expansive soil. [ABSTRACT FROM AUTHOR]

The 8 January 2022 Mw6.7 Menyuan earthquake was generated in the transition zone between the western Lenglongling fault and the eastern Tuolaishan fault, both being part of the Qilian–Haiyuan fault system with an important role in the adjustment of the regional tectonic regime. In this study, four pairs of SAR (synthetic aperture radar) data from Sentinel-1 and ALOS-2 (Advanced Land Observation Satellite-2) satellites were used to derive the surface displacement observations along the satellite line-of-sight (LOS) and azimuth directions using the differential interferometric SAR (InSAR, DInSAR), pixel offset-tracking (POT), multiple aperture InSAR (MAI), and burst overlap InSAR (BOI) methods. An SM-VCE method (i.e., a method for measuring three-dimensional (3D) surface displacements with InSAR based on a strain model and variance component estimation) was employed to combine these derived SAR displacement observations to calculate the 3D co-seismic displacements. Results indicate that the 2022 Menyuan earthquake was dominated by left-lateral slip, and the maximum horizontal and vertical displacements were 1.9 m and 0.6 m, respectively. The relative horizontal surface displacement across the fault was as large as 2–3 m, and the fault-parallel displacement magnitude was larger on the southern side of the fault compared with the northern side. Furthermore, three co-seismic strain invariants were also investigated, revealing that the near-fault area suffered severe deformation, and two obviously expanding and compressed zones were identified. We provide displacements/strains derived in this study in the prevailing geotiff format, which will be useful for the broad community studying this earthquake; in addition, the SM-VCE code used in this study is open to the public so that readers can better understand the method. [ABSTRACT FROM AUTHOR]

Areas and spatial distribution information of paddy rice are important for managing food security, water use, and climate change. However, there are many difficulties in mapping paddy rice, especially mapping multi-season paddy rice in rainy regions, including differences in phenology, the influence of weather, and farmland fragmentation. To resolve these problems, a novel multi-season paddy rice mapping approach based on Sentinel-1A and Landsat-8 data is proposed. First, Sentinel-1A data were enhanced based on the fact that the backscattering coefficient of paddy rice varies according to its growth stage. Second, cropland information was enhanced based on the fact that the NDVI of cropland in winter is lower than that in the growing season. Then, paddy rice and cropland areas were extracted using a K-Means unsupervised classifier with enhanced images. Third, to further improve the paddy rice classification accuracy, cropland information was utilized to optimize distribution of paddy rice by the fact that paddy rice must be planted in cropland. Classification accuracy was validated based on ground-data from 25 field survey quadrats measuring 600 m × 600 m. The results show that: multi-season paddy rice planting areas effectively was extracted by the method and adjusted early rice area of 1630.84 km2, adjusted middle rice area of 556.21 km2, and adjusted late rice area of 3138.37 km2. The overall accuracy was 98.10%, with a kappa coefficient of 0.94. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) technology is known as one of the most effective methods for active landslide identification and deformation monitoring in large areas, and thus it is conducive to preventing and mitigating the losses caused by landslides. However, great uncertainty inevitably exists due to influences of complex terrains, dense vegetations, and atmospheric interferences in the southwestern mountainous area of China, and this is associated with false or erroneous judgment during the process of landslide identification. In this study, a landslide identification method is put forward by integrating InSAR technology and airborne light detection and ranging (LiDAR) technology. Via this method, surface deformation characteristics detected by InSAR technology and micro-geomorphic features reflected by LiDAR technology were used to identify and map landslides of large areas. Herein, the method was applied to process 224 Sentinel-1 images covering Danba County and its surrounding areas (540 km2) from October 2014 to September 2020. Firstly, 44 active landslides with total areas of 59 km2 were detected by stacking InSAR technology. Then, major regions up to 135 km2 were validated by data gained from the airborne LiDAR technology. Particularly, several large landslides with lengths and/or widths of more than 2 km were found. Further, the precipitation data were integrated with the above results to analyze the temporal deformation characteristics of three typical landslides from major regions via SBAS InSAR technology. The key findings were as follows: (1) The combination of InSAR and LiDAR technologies could improve the accuracy of landslide detection and identification; (2) there was a significant correlation between temporal deformation characteristics of some landslides and monthly rainfall, with an obvious hysteretic effect existing between the initiation timing of rainfall and that of deformation; (3) the results of this study will be important guidance for the prevention and control of geological hazards in Danba County and areas with similar complex geomorphological conditions by helping effectively identify and map landslides. [ABSTRACT FROM AUTHOR]

Groundwater resources have been exploited and utilized on a large scale in the North China Plain (NCP) since the 1970s. As a result of extensive groundwater depletion, the NCP has experienced significant land subsidence, which threatens geological stability and infrastructure health and exacerbates the risks of other geohazards. In this study, we employed multi-track Synthetic Aperture Radar (SAR) datasets acquired by the Sentinel-1A (S1A) satellite to detect spatial and temporal distributions of surface deformation in the NCP from 2016 to 2018 based on multi-temporal interferometric synthetic aperture radar (MT-InSAR). The results show that the overall ground displacement ranged from −165.4 mm/yr (subsidence) to 9.9 mm/yr (uplift) with a standard variance of 28.8 mm/yr. During the InSAR monitoring period, the temporal pattern of land subsidence was dominated by a decreasing tendency and the spatial pattern of land subsidence in the coastal plain exhibited an expansion trend. Validation results show that the S1A datasets agree well with levelling data, indicating the reliability of the InSAR results. With groundwater level data, we found that the distribution of subsidence in the NCP is spatially consistent with that of deep groundwater depression cones. A comparison with land use data shows that the agricultural usage of groundwater is the dominant mechanism responsible for land subsidence in the whole study area. Through an integrated analysis of land subsidence distribution characteristics, geological data, and previous research results, we found that other triggering factors, such as active faults, precipitation recharge, urbanization, and oil/gas extraction, have also impacted land subsidence in the NCP to different degrees. [ABSTRACT FROM AUTHOR]

Landslides are a common natural hazard that causes casualties and unprecedented economic losses every year, especially in vulnerable developing countries. Considering the high cost of in-situ monitoring equipment and the sparse coverage of monitoring points, the Sentinel-1 images and Interferometric Synthetic Aperture Radar (InSAR) technique were used to conduct landslide monitoring and analysis. The Muyubao landslide in the Three Gorges Reservoir area in China was taken as a case study. A total of 37 images from March 2016 to September 2017 were collected, and the displacement time series were extracted using the Stanford Method for Persistent Scatterer (StaMPS) small baselines subset method. The comparison to global positioning system monitoring results indicated that the InSAR processing of the Muyubao landslide was accurate and reliable. Combined with the field investigation, the deformation evolution and its response to triggering factors were analyzed. During this monitoring period, the creeping process of the Muyubao landslide showed obvious spatiotemporal deformation differences. The changes in the reservoir water level were the trigger of the Muyubao landslide, and its deformation mainly occurred during the fluctuation period and high-water level period of the reservoir. [ABSTRACT FROM AUTHOR]

A high resolution mangrove map (e.g., 10-m), including mangrove patches with small size, is urgently needed for mangrove protection and ecosystem function estimation, because more small mangrove patches have disappeared with influence of human disturbance and sea-level rise. However, recent national-scale mangrove forest maps are mainly derived from 30-m Landsat imagery, and their spatial resolution is relatively coarse to accurately characterize the extent of mangroves, especially those with small size. Now, Sentinel imagery with 10-m resolution provides an opportunity for generating high-resolution mangrove maps containing these small mangrove patches. Here, we used spectral/backscatter-temporal variability metrics (quantiles) derived from Sentinel-1 SAR (Synthetic Aperture Radar) and/or Sentinel-2 MSI (Multispectral Instrument) time-series imagery as input features of random forest to classify mangroves in China. We found that Sentinel-2 (F1-Score of 0.895) is more effective than Sentinel-1 (F1-score of 0.88) in mangrove extraction, and a combination of SAR and MSI imagery can get the best accuracy (F1-score of 0.94). The 10-m mangrove map was derived by combining SAR and MSI data, which identified 20003 ha mangroves in China, and the area of small mangrove patches (<1 ha) is 1741 ha, occupying 8.7% of the whole mangrove area. At the province level, Guangdong has the largest area (819 ha) of small mangrove patches, and in Fujian, the percentage of small mangrove patches is the highest (11.4%). A comparison with existing 30-m mangrove products showed noticeable disagreement, indicating the necessity for generating mangrove extent product with 10-m resolution. This study demonstrates the significant potential of using Sentinel-1 and Sentinel-2 images to produce an accurate and high-resolution mangrove forest map with Google Earth Engine (GEE). The mangrove forest map is expected to provide critical information to conservation managers, scientists, and other stakeholders in monitoring the dynamics of the mangrove forest. [ABSTRACT FROM AUTHOR]