Search

The PIESAT-01 constellation is the world's first multi-baseline distributed synthetic aperture radar (SAR) constellation with a "Cartwheel" formation. The "Cartwheel" formation is a unique formation in which four satellites fly in companion orbits, ensuring that at any given moment, the main satellite remains at the center, with three auxiliary satellites orbiting around it. Due to this unique configuration of the PIESAT-01 constellation, four images of the same region and six pairs of baselines can be obtained with each shot. So far, there has been no imaging and interference research based on four-satellite constellation measured data, and there is an urgent need to explore algorithms for the "Cartwheel" configuration imaging and digital surface model (DSM) production. This paper introduces an improved bistatic SAR imaging algorithm under the four-satellites interferometric mode, which solves the problem of multi-orbit nonparallelism in imaging while ensuring imaging coherence and focusing ability. Subsequently, it presents an interferometric processing method for the six pairs of baselines, weighted fusion based on elevation ambiguity from different baselines, to obtain a high-precision DSM. Finally, this paper selects the Dingxi region of China and other regions with diverse terrains for imaging and DSM production and compares the DSM results with ICESat-2 global geolocated photon data and TanDEM DSM data. The results indicate that the accuracy of PIESAT-01 DSM meets the standards of China's 1:50,000 scale and HRTI-3, demonstrating a high level of precision. Moreover, PIESAT-01 data alleviate the reliance on simulated data for research on multi-baseline imaging and multi-baseline phase unwrapping algorithms and can provide more effective and realistic measured data. [ABSTRACT FROM AUTHOR]

Landslides are a common geological disaster, which cause many economic losses and casualties in the world each year. Drawing up a landslide list and monitoring their deformations is crucial to prevent landslide disasters. Interferometric synthetic aperture radar (InSAR) can obtain millimeter-level surface deformations and provide data support for landslide deformation monitoring. However, some landslides are difficult to detect due to the low-coherence caused by vegetation cover in mountainous areas and the difficulty of phase unwrapping caused by large landslide deformations. In this paper, a method based on multi-direction phase gradient stacking is proposed. It employs the differential interferograms of small baseline sets to directly obtain the abnormal region, thereby avoiding the problem where part of landslide cannot be detected due to a phase unwrapping error. In this study, the Sentinel-1 satellite ascending and descending data from 2018 to 2020 are used to detect landslides around Zhouqu County, China. A total of 26 active landslides were detected in ascending data and 32 active landslides in the descending data using the method in this paper, while the SBAS-InSAR detected 19 active landslides in the ascending data and 25 active landslides in the descending data. The method in this paper can successfully detect landslides in areas that are difficult for the SBAS-InSAR to detect. In addition, the proposed method does not require phase unwrapping, so a significant amount of data processing time can be saved. [ABSTRACT FROM AUTHOR]

Time series dynamic prediction of surface deformation in mining areas can provide reference data for coal mine safety and production, which has important impacts. The combination of interferometric synthetic aperture radar (InSAR) technology and the probability integral method (PIM) is commonly used for predicting deformation. However, most surface subsidence prediction in mining areas is based on the static PIM parameters, failing to achieve the three-dimensional (3D) dynamic deformation prediction. This paper proposed a 3D deformation dynamic prediction model (InSAR-3D-CTPIM) between InSAR deformation observations and dynamic coordinate-time PIM (CTPIM) parameters, which can realize the prediction of east–west, north–south, and vertical series deformation caused by mining. The method has been validated by simulation experiments and real experiments in the mining area of Jiansheng Coal Mine in Baisha Reservoir, Henan Province, China. The results showed that the modeling accuracy was improved by 34.3% compared to the traditional multi-rate model, and the accuracy was improved by 28.5% compared to the vertical deformation obtained by the traditional static PIM method. The InSAR-3D-CTPIM model can be used to predict the evolutionary history of basin-wide surface deformation dynamics in coal mining areas, and provide a reference for the early warning and prediction of geological hazards in coal mining areas. [ABSTRACT FROM AUTHOR]

The continuous downward movement exhibited by the Lashagou landslide group in recent years poses a significant threat to the safety of both vehicles and pedestrians traversing the highway G310. By integrating geomorphological interpretation using multi-temporal optical images, interferometric synthetic aperture radar (InSAR) measurements, and continuous global navigation satellite system (GNSS) observations, this paper traced the formation period of the Lashagou landslide group, and explored its kinematic behavior under external drivers such as rainfall and snowmelt. The results indicate that the formation period can be specifically categorized into three periods: before, during, and after the construction of highway G310. The construction of highway G310 is the direct cause and prerequisite for the formation of the Lashagou landslide group, whereas summer precipitation and spring snowmelt are the external driving factors contributing to its continuous downward movement. Additionally, both the long-term seasonal downslope movement and transient acceleration events are strongly controlled by rainfall, and there is a time lag of approximately 1–2 days between the transient acceleration and heavy rainfall events. This study highlights the benefits of leveraging multi-source remote sensing data to investigate slow-moving landslides, which is advantageous for the implementation of effective control and engineering intervention to mitigate potential landslide disasters. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

A trend in the development of spaceborne Synthetic Aperture Radar (SAR) technology is the shift from a single-satellite repeated observation mode to a multi-satellite collaborative observation mode. However, current multi-satellite collaborative geolocation algorithms face challenges, such as geometric model mismatch and poor baseline estimation accuracy, arising from highly dynamic changes among multi-satellites. This paper introduces a high-precision and efficient geolocation algorithm for a spaceborne bistatic interferometric SAR (BiInSAR) system based on an improved range–Doppler (IRD) model. The proposed algorithm encompasses three key contributions. Firstly, a comprehensive description of the spatial baseline geometric model unique to the bistatic configuration is provided, with a specific focus on deriving the perpendicular baseline expression. Secondly, IRD geolocation functions are established to meet the specific requirements of the bistatic configuration. Then, a novel BiInSAR geolocation algorithm based on the IRD's functions is proposed, which can significantly improve the target geolocation accuracy by modifying the range–Doppler equation to suit the bistatic configuration. Meanwhile, a low-coupling parallel calculation method is proposed, which can improve the calculation speed by two to three times. Finally, the accuracy and efficiency of the algorithm are demonstrated using experimental data acquired by the TH-2 satellite, which is China's first spaceborne BiInSAR system. The experimental results prove that the IRD algorithm exhibits geolocation accuracy with an average error of less than 1 m and a standard deviation of less than 2.5 m while maintaining computational efficiency at a calculation speed of 1,429,678 pixels per second. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

Landslides are common natural disasters that cause serious damage to ecosystems and human societies. To effectively prevent and mitigate these disasters, an accurate assessment of landslide hazards is necessary. However, most traditional landslide hazard assessment methods rely on static assessment factors while ignoring the dynamic changes in landslides, which may lead to false-positive errors in the assessment results. This paper presents a novel landslide hazard assessment method for the Zagunao River basin, China. In this study, an updated landslide inventory was obtained for the Zagunao River basin using data from interferometric synthetic aperture radar (InSAR) and optical images. Based on this inventory, a landslide susceptibility map was developed using a random forest algorithm. Finally, an evaluation matrix was created by combining the results of deformation rates from both ascending and descending data to establish a hazard level that considers surface deformation. The method presented in this study can reflect recent landslide hazards in the region and produce dynamic assessments of regional landslide hazards. It provides a basis for the government to identify and manage high-risk areas. [ABSTRACT FROM AUTHOR]

In recent years, numerous ancient landslides initially triggered by historic earthquakes on the eastern Tibetan Plateau have been reactivated by fault activity and heavy rainfall, causing severe human and economic losses. Previous studies have indicated that short-term heavy rainfall plays a crucial role in the reactivation of ancient landslides. However, the deformation behavior and reactivation mechanisms of seasonal rainfall-induced ancient landslides remain poorly understood. In this paper, taking the Dandu ancient landslide as an example, field investigations, ring shear experiments, and interferometric synthetic aperture radar (InSAR) deformation monitoring were performed. The cracks in the landslide, formed by fault creeping and seismic activity, provide pathways for rainwater infiltration, ultimately reducing the shear resistance of the slip zone and causing reactivation and deformation of the Dandu landslide. The deformation behavior of landslides is very responsive to seasonal rainfall, with sliding movements beginning to accelerate sharply during the rainy season and decelerating during the dry season. However, this response generally lags by several weeks, indicating that rainfall takes time to infiltrate into the slip zone. These research results could help us better understand the reactivation mechanism of ancient landslides triggered by seasonal rainfall. Furthermore, these findings explain why many slope failures take place in the dry season, which typically occurs approximately a month after the rainy season, rather than in the rainy season itself. [ABSTRACT FROM AUTHOR]

Forest aboveground biomass (AGB) retrieval using synthetic aperture radar (SAR) backscatter has received extensive attention. The water cloud model (WCM), because of its simplicity and physical significance, has been one of the most commonly used models for estimating forest AGB using SAR backscatter. Nevertheless, forest AGB estimation using the WCM is usually based on simplified assumptions and empirical fitting, leading to results that tend to overestimate or underestimate. Moreover, the physical connection between the model and the polarimetric synthetic aperture radar (PolSAR) is not established, which leads to the limitation of the inversion scale. In this paper, based on the fully polarimetric SAR data from the Advanced Land Observing Satellite-2 (ALOS-2) Phased Array-type L-band Synthetic Aperture Radar (PALSAR-2), the relative contributions of the three major scattering mechanisms were first analyzed in a hilly area of southern China. On this basis, the traditional WCM was extended by considering the secondary scattering mechanism. Then, to establish the direct relationship between the vegetation scattering mechanism and forest AGB, a new relationship equation between the PolSAR decomposition model and the improved water cloud model (I-WCM) was constructed without the help of external data. Finally, a nonlinear iterative method was used to estimate the forest AGB. The results show that volume scattering is the dominant mechanism, accounting for more than 60%. Double-bounce scattering accounts for the smallest fraction, but still about 10%, which means that the contribution of the double-bounce scattering component is not negligible in forested areas because of the strong penetration capability of the long-wave SAR. The modified method provides a correlation coefficient R2 of 0.665 and a root mean square error (RMSE) of 21.902, which is an improvement of 36.42% compared to the traditional fitting method. Moreover, it enables the extraction of forest parameters at the pix scale using PolSAR data without the need for low-resolution external data and is thus helpful for high-resolution mapping of forest AGB. [ABSTRACT FROM AUTHOR]

In complex mountainous areas where earthquakes are frequent, landslide hazards pose a significant threat to human life and property due to their high degree of concealment, complex development mechanism, and abrupt nature. In view of the problems of the existing landslide hazard susceptibility evaluation model, such as poor effectiveness and inaccuracy of landslide hazard data and the need for experts to participate in the calculation of a large number of evaluation factor weight classification statistics. In this paper, a combined SBAS-InSAR (Small Baseline Subsets-Interferometric Synthetic Aperture Radar) and PSO-RF (Particle Swarm Optimization-Random Forest) algorithm was proposed to evaluate the susceptibility of landslide hazards in complex mountainous regions characterized by frequent earthquakes, deep river valleys, and large terrain height differences. First, the SBAS-InSAR technique was used to invert the surface deformation rates of the study area and identified potential landslide hazards. Second, the study area was divided into 412,585 grid cells, and the 16 selected environmental factors were analyzed comprehensively to identify the most effective evaluation factors. Last, 2722 landslide (1361 grid cells) and non-landslide (1361 grid cells) grid cells in the study area were randomly divided into a training dataset (70%) and a test dataset (30%). By analyzing real landslide and non-landslide data, the performances of the PSO-RF algorithm and three other machine learning algorithms, BP (back propagation), SVM (support vector machines), and RF (random forest) algorithms were compared. The results showed that 329 potential landslide hazards were updated using the surface deformation rates and existing landslide cataloguing data. Furthermore, the area under the curve (AUC) value and the accuracy (ACC) of the PSO-RF algorithm were 0.9567 and 0.8874, which were higher than those of the BP (0.8823 and 0.8274), SVM (0.8910 and 0.8311), and RF (0.9293 and 0.8531), respectively. In conclusion, the method put forth in this paper can be effectively updated landslide data sources and implemented a susceptibility prediction assessment of landslide disasters in intricate mountainous areas. The findings can serve as a strong reference for the prevention of landslide hazards and decision-making mitigation by government departments. [ABSTRACT FROM AUTHOR]

Monitoring mine activities can help management track the status of mineral resource exploration and mine rehabilitation. It is crucial to the sustainable development of the mining industry and the protection of the geological environment in mining areas. To monitor the mining activities of shallow surface outcrops in the arid and semi-arid regions of northwest China, this paper proposes a remote sensing monitoring approach of mining activities based on deep learning and integrated interferometric synthetic aperture radar technique. This approach uses the DeepLabV3-ResNet model to identify and extract the spatial location of the mine patches and then uses object-oriented analysis and spatial analysis methods to optimize the mine patch boundaries. SBAS-InSAR technique is used to obtain the time-series deformation information of the mine patches and is combined with the multi-temporal optical imagery to analyze the mining activities in the study area. The proposed approach has a recognition accuracy of 95.80% for the identification and extraction of mine patches, with an F1-score of 0.727 at the pixel level, and the average area similarity for all patches is 0.78 at the object-oriented level. The proposed approach possesses the capability to analyze mining activities, indicating promising prospects for engineering applications. It provides a reference for monitoring mining activities using multisource satellite remote sensing. [ABSTRACT FROM AUTHOR]

The world's largest macroalgae bloom (also known as green tide) has been reported since the 29th Olympic Games in 2008, which is verified as the fast reproduction of floating green macroalgae (Ulva prolifera). It is helpful to assess the biomass of macroalgae for the government of marine environment protection. In this study, the synchronization cruise experiment was firstly introduced, which aimed to investigate the biomass evaluation of Ulva prolifera in the Yellow Sea of China. The Floating Algae Index by Polarimetric SAR image (FAIPS) was then proposed. Finally, the floating algae biomass evaluation model was demonstrated and verified, which showed an exponential relationship between FAIPS and wet biomass per area (kg/m2) of macroalgae. The model proposed in this paper can be used in the biomass assessment of floating algae in the presence of polarimetric SAR images, regardless of daylight and cloud coverage over the sea surface. [ABSTRACT FROM AUTHOR]

The LuTan-1(LT-1), known as the L-band differential interferometric synthetic aperture radar (SAR) satellite system, is an essential piece of civil infrastructure in China, providing extensive applications such as surface deformation monitoring and topographic mapping. To achieve high-resolution and wide-swath (HRWS) observation abilities, the LT-1 takes the dual receiving antenna (DRA) imaging mode as its working mode. However, amplitude and phase errors between channels lead to a mismatch between the reconstruction filter and the multichannel echo signal, worsen the reconstructed azimuth spectrum, and introduce ambiguity targets in the final imaging results, seriously affecting the final imaging quality. In order to better evaluate the channel error and azimuth ambiguity performance of the LT-1 system, this paper proposed an advanced channel consistency correction method and conducted many measured data experiments. The experimental results show that the proposed method is effective, and the LT-1 system has excellent channel error control and azimuth ambiguity performance. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) has developed rapidly over the past years and is considered as an important method for surface deformation monitoring, benefiting from growing data quantities and improving data quality. However, the handing of SAR big data poses significant challenges for related algorithms and pipeline, particularly in large-scale SAR data processing. In addition, InSAR algorithms are highly complex, and their task dependencies are intricate. There is a lack of efficient optimization models and task scheduling for InSAR pipeline. In this paper, we design parallel time-series InSAR processing models based on multi-thread technology for high efficiency in processing InSAR big data. These models concentrate on parallelizing critical algorithms that have high complexity, with a focus on deconstructing two computationally intensive algorithms through loop unrolling. Our parallel models have shown a significant improvement of 10–20 times in performance. We have also developed a parallel optimization tool, Simultaneous Task Automatic Runtime (STAR), which utilizes a data flow optimization strategy with thread pool technology to address the problem of low CPU utilization resulting from multiple modules and task dependencies in the InSAR processing pipeline. STAR provides a data-driven pipeline and enables concurrent execution of multiple tasks, with greater flexibility to keep the CPU busy and further improve CPU utilization through predetermined task flow. Additionally, a supercomputing-based system has been constructed for processing massive InSAR scientific big data and providing technical support for nationwide surface deformation measurement, in accordance with the framework of time series InSAR data processing. Using this system, we processed InSAR data with the volumes of 500 TB and 700 TB in 5 and 7 days, respectively. Finally we generated two maps of land surface deformation all over China. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) is an integrated navigation technique that can be used for aircraft positioning and attitude retrieval, regardless of weather conditions. The key aspect of the entire system is interference fringe matching, which has not been extensively researched in existing literature. To address this gap, this paper proposes a terrain-feature-based interference fringe-matching algorithm. The proposed algorithm first extracts mountain line features from the interference fringes and identifies mountain branch points as key points for feature matching. A threshold is set to eliminate false detections of mountain branch points caused by phase mutation. Matching is then carried out by combining the mountain line features and curvature design feature descriptors of the area around a branch point. The proposed algorithm is verified using interference fringe data obtained from an actual flight experiment in Inner Mongolia, China, compared to a reference interference fringe dataset with errors. The results show that, under the condition of position error, the proposed algorithm yields 72 matching inliers with a precision of 0.103, a recall of 0.128, and an F1-Score of 0.144. Compared to traditional algorithms, our proposed algorithm significantly improves the problem of mismatch and opens up new possibilities for downstream interference fringe matching navigation technology. Furthermore, the proposed algorithm provides a new approach for remote sensing image matching using terrain features. [ABSTRACT FROM AUTHOR]

Landslides along the Three Gorges Reservoir in China pose a threat to coastal residents and waterway safety. To reduce false positive misjudgments caused by a sudden local change in the landslide deformation curve, in this paper, we propose an effective method for predicting the deformation trend of reservoir bank landslides. We take reservoir bank landslides in the Wanzhou District of the Three Gorges Reservoir area as the research object. The Time-Series Interferometric Synthetic Aperture Radar (InSAR) method and 62 Sentinel-1A images from 2018 to 2022 were selected for landslide deformation monitoring, and the Hurst index was calculated to characterize the deformation trend. Furthermore, we propose a method for predicting the deformation trend based on the statistical distribution of deformation rates and the physical significance of the Hurst index. After the field survey and Global Positioning System (GPS) verification, the Time-Series InSAR results are shown to be reliable. We take the Sifangbei landslide as a representative case to analyze the validation results. It is found that the determined Sifangbei landslide deformation trend is consistent with the conclusions for the region. In addition, the deformation trend of a reservoir bank slope has obvious spatial and temporal differences. Changes in the reservoir water level and concentrated rainfall play roles similar to those of catalysts. The proposed method, involving the combination of Time-Series InSAR and the Hurst index, can effectively monitor deformation and predict the stability trend of reservoir bank landslides. The presented research results provide new ideas and solutions for landslide prevention and risk mitigation in reservoir areas. [ABSTRACT FROM AUTHOR]

Corn is an important food crop worldwide, and its yield is directly related to Chinese food security. Accurate remote sensing extraction of corn can realize the rational application of land resources, which is of great significance to the sustainable development of modern agriculture. In the field of large-scale crop remote sensing classification, single-period optical remote sensing images often cannot achieve high-precision classification. To improve classification accuracy, multiple time series image combinations have gradually been adopted. However, due to the influence of cloudy and rainy weather, it is often difficult to obtain complete time series optical images. Synthetic aperture radar (SAR) data are imaged by microwaves, which have strong penetrating power and are not affected by clouds. A critical way to solve this problem is to use SAR images to compensate for the lack of optical images and obtain a complete time series image in the corn-growing season. However, SAR images have limited wavelengths and cannot provide important wavelengths, such as visible light bands and near-infrared information. To solve this problem, this study took Zhaodong City, a vital corn-planting base in China, as the research area; took GF-6/GF-3 and Sentinel-1/Sentinel-2 as remote sensing data sources; designed12 classification scenarios; analyzed the best classification period and the best time series combination of corn classification; studied the influence of SAR images on the classification results of time series images; and compared the classification differences between GF-6/GF-3 and Sentinel-1/Sentinel-2. The results show that the classification accuracy of time series combinations is much higher than that of single-period images. The polarization characteristics of SAR images can improve the classification accuracy with time series images. The classification accuracy of GF series images from China is obviously higher than that of Sentinel series images. The research performed in this paper can provide a reference for agricultural classification by using remote sensing data. [ABSTRACT FROM AUTHOR]

Permafrost is a significant part of the cryosphere, which has gained increasing attention from scientists, policy-makers, and the general public due to global warming, environmental degradation, water shortages, and intense human activities. Although many permafrost research review articles have been published, these studies were predominantly limited to either one subject or one field, while systematic studies about permafrost based on bibliometric analysis methods remain limited. We aim to fill this gap by conducting a bibliometric analysis of 13,697 articles in the field of permafrost research from 1942 to 2021, collected from the Web of Science core collection database. The results indicate that permafrost research is a typically multi-author, multi-country, and multi-institution cooperative field, involved in many research fields. The cumulative number of publications has presented an exponential increase over the past 80 years, with an average annual growth rate of 10.40%. Since 2000, China has seen a rapid growth in the number of publications per year, surpassing the USA in 2016 and leading in the years since then. In addition, the authors from China have great contributions in publications, and there is good room for permafrost development in the future according to the authors' M-index ranking. After the analysis of authors' keywords, we found that, compared to the conventional methods, machine learning and interferometric synthetic aperture radar (InSAR) are new technological approaches introduced in recent years, and the Qinghai–Tibet Plateau has become a popular study area. The results presented here can help related researchers, scholars, and students in the field to better understand the past developments, current status, and future trends of permafrost research. Furthermore, this paper presents and expands the general process of the bibliometric method used in permafrost studies, which can provide researchers with new inspirations and improve discipline research approach. [ABSTRACT FROM AUTHOR]

Landslides are one of the extremely high-incidence and serious-loss geological disasters in the world, and the early monitoring and warning of landslides are of great importance. The Cheyiping landslide, located in western Yunnan Province, China, added many cracks and dislocations to the surface of the slope due to the severe seasonal rainfall and rise of the water level, which seriously threaten the safety of residents and roads located on the body and foot of the slope. To investigate the movement of the landslide, this paper used Sentinel-1A SAR data processed by time-series interferometric synthetic aperture radar (InSAR) technology to monitor the long-time surface deformation. The landslide boundary was defined, then the spatial distribution of landslide surface deformation from 5 January 2018 to 27 December 2021 was obtained. According to the monthly rainfall data and the temporal deformation results, the movement of the landslide was highly correlated with seasonal rainfall, and the Cheyiping landslide underwent seasonal sectional accelerated deformation. Moreover, the water level change of the Lancang River caused by the water storage of the hydropower station and seasonal rainfall accelerates the deformation of the landslide. This case study contributes to the interpretation of the slow deformation mechanism of the Cheyiping landslide and early hazard warning. [ABSTRACT FROM AUTHOR]

Combinations of multi-sensor remote sensing images and machine learning have attracted much attention in recent years due to the spectral similarity of wetland plant canopy. However, the integration of hyperspectral and quad-polarization synthetic aperture radar (SAR) images for classifying marsh vegetation has still been faced with the challenges of using machine learning algorithms. To resolve this issue, this study proposed an approach to classifying marsh vegetation in the Honghe National Nature Reserve, northeast China, by combining backscattering coefficient and polarimetric decomposition parameters of C-band and L-band quad-polarization SAR data with hyperspectral images. We further developed an ensemble learning model by stacking Random Forest (RF), CatBoost and XGBoost algorithms for marsh vegetation mapping and evaluated its classification performance of marsh vegetation between combinations of hyperspectral and full-polarization SAR data and any of the lone sensor images. Finally, this paper explored the effect of different polarimetric decomposition methods and wavelengths of radar on classifying wetland vegetation. We found that a combination of ZH-1 hyperspectral images, C-band GF-3, and L-band ALOS-2 quad-polarization SAR images achieved the highest overall classification accuracy (93.13%), which was 5.58–9.01% higher than that only using C-band or L-band quad-polarization SAR images. This study confirmed that stacking ensemble learning provided better performance than a single machine learning model using multi-source images in most of the classification schemes, with the overall accuracy ranging from 77.02% to 92.27%. The CatBoost algorithm was capable of identifying forests and deep-water marsh vegetation. We further found that L-band ALOS-2 SAR images achieved higher classification accuracy when compared to C-band GF-3 polarimetric SAR data. ALOS-2 was more sensitive to deep-water marsh vegetation classification, while GF-3 was more sensitive to shallow-water marsh vegetation mapping. Finally, scattering model-based decomposition provided important polarimetric parameters from ALOS-2 SAR images for marsh vegetation classification, while eigenvector/eigenvalue-based and two-component decompositions produced a great contribution when using GF-3 SAR images. [ABSTRACT FROM AUTHOR]

Because the penetration depth of electromagnetic waves in forests is large in the longer wavelength band, most traditional forest height estimation methods are carried out using polarimetric interferometry synthetic aperture radar (PolInSAR) data of the L or P band, and the estimation method is a three-stage method based on the random volume over ground (RVoG) model. For X-band electromagnetic waves, the penetration depth of radar waves in forests is limited, so the traditional forest height estimation method is no longer applicable. In view of the above problems, in this paper we propose a new forest height estimation strategy for airborne X-band PolInSAR data. Firstly, the sub-view interferometric SAR pairs obtained via frequency segmentation (FS) in the Doppler domain are used to extend the polarimetric interferometry coherence coefficient (PolInCC) range of the original SAR image under different polarization states, so as to obtain the accurate ground phase. For the determination of the effective volume coherence coefficient (VCC), part of the fitting line of the extended-range PolInCC distribution that is intercepted by the fixed extinction coherence coefficient curve (FECCC) of the fixed range is averaged to obtain the accurate effective VCC. Finally, the high-precision forest canopy height in the X-band is estimated using the effective VCC with the ground phase removed in the look-up table (LUT). The effectiveness of the proposed method was verified using airborne-measured data obtained in Shaanxi Province, China. The comparison was carried out using different strategies, in which we substituted one step of the process with the conventional method. The results indicated that our new strategy could reduce the root mean square error (RMSE) of the predicted canopy height vastly to 1.02 m, with a lower estimation height error of 12.86%. [ABSTRACT FROM AUTHOR]

Groundwater overexploitation and loading of buildings have been the main factors triggering land subsidence along the west coast of Bohai Bay, China, since the 2000s. Uneven subsidence has been causing damage to buildings and civil facilities, loss of elevation, increasing the risk of flood and seawater intrusion, and threatening the safety of people's lives and property. This paper analyzed the spatial and temporal features of land subsidence along the coastal area from 2003 to 2010 and from 2015 to 2020, respectively. The relations between the initiating factors and land subsidence were explored. Then, the simulation model of land subsidence was constructed through a deep learning method. During the process, multiple data were collected, including land satellite (Landsat), environmental satellite advanced synthetic aperture radar (ENVISAT ASAR) and Sentinel-1 images, leveling data, lithological data, and groundwater level data. The area occupied by buildings and vertical displacement were extracted by using supervised classification, small baseline subset (SBAS), and persistent scatterer interferometry (PSI) technologies. The gated recurrent unit (GRU) neural network was adopted to simulate the evolution of land subsidence. Results showed that the maximum annual vertical displacement rate decreased from −94 mm/yr during 2003–2010 to −87 mm/yr during 2015–2020. The correlation efficiency between the groundwater level of the third confined aquifer group and land subsidence was larger than the area occupied by buildings and the compressible layer thickness with subsidence. The constructed GRU neural network model can simulate subsidence from September 2019 to December 2019, with the overall RMSE and MAE being 3.16 mm and 2.19 mm, respectively. This work can facilitate an understanding of the evolution and prevention of land subsidence along the west coast of Bohai Bay, which will provide information for policy decisions and flood-fighting plans of the worldwide coastal cities. [ABSTRACT FROM AUTHOR]

As one of the most prevailing geodetic tools, the interferometric synthetic aperture radar (InSAR) technique can accurately obtain co-seismic displacements, but is limited to the one-dimensional line-of-sight (LOS) measurement. It is therefore difficult to completely reveal the real three-dimensional (3D) surface displacements with InSAR. By employing azimuth displacement observations from pixel offset tracking (POT) and multiple aperture InSAR (MAI) techniques, 3D displacements of large-magnitude earthquakes can be obtained by integrating the ascending and descending data. However, this method cannot be used to accurately realize the 3D surface displacement measurements of small-magnitude earthquakes due to the low accuracies of the POT/MAI-derived azimuth displacement measurements. In this paper, an alternative method is proposed to calculate co-seismic 3D displacements from ascending and descending InSAR-LOS observations with the dislocation model-based displacement direction constraint. The main contribution lies in the two virtual observation equations that are obtained from the dislocation model-based forward-modeling 3D displacements, which are then combined with the ascending/descending InSAR observations to calculate the 3D displacements. The basis of the two virtual observation equations is that the directions of the 3D displacement vectors are very similar for real and model-based 3D displacements. In addition, the weighted least squares (WLS) method is employed to solve the final 3D displacements, which aims to consider and balance the possible errors in the InSAR observations as well as the dislocation model-based displacement direction constraint. A simulation experiment demonstrates that the proposed method can achieve more accurate 3D displacements compared with the existing methods. The co-seismic 3D displacements of the 2020 Nima earthquake are then accurately obtained by the proposed method. The results show that co-seismic displacements are dominated by the vertical displacement, the magnitude of the horizontal displacement is relatively small, and the overall displacement pattern fits well with the tensile rupture. [ABSTRACT FROM AUTHOR]

With the rapid development of interferometric synthetic aperture radar (InSAR) measurement technology, its measurement accuracy requirements are increasing. Atmospheric delay errors must be corrected, especially in the case of crustal deformation monitoring, the 20% variation of tropospheric water vapor among InSAR pairs generally produces range from 10 cm to 14 cm deformation errors. Such errors can be of the same magnitude as the annual changes in crustal deformation, or even greater, masking crustal deformation information and seriously affecting the results of crustal deformation monitoring. Therefore, in order to obtain a more accurate InSAR atmospheric delay correction model, this paper calculated and integrated atmospheric delays that were estimated by different sources, including the 37 pressure levels of the fifth generation of the European Centre for Medium-Range Weather Forecasts (ECMWF)) numerical weather prediction model, ECMWF Reanalysis v5 (ERA5), and Global Navigation Satellite System (GNSS) measurement data from the crustal movement observation network of China, based on the variance component estimation (VCE) weighting method. The results showed that the integrated model, based on the VCE method, is better than the generic atmospheric correction online service (GACOS) model for InSAR measuring of crustal deformation. The precision in monitoring crustal deformations was improved by approximately 5 mm, the correlation coefficient of atmospheric delay errors and crustal deformations improved from 0.287 to 0.347, and accuracy improved by approximately 25%. However, the improvement in accuracy was limited because of system error decoherence that was induced by atmospheric noise caused by abundant vegetation or snow cover. Therefore, in order to achieve more accurate results, we recommend the adoption of the multi-source integrated atmospheric delay correction model, based on the VCE method, for InSAR high-precision measuring of crustal deformation and seismic activities. [ABSTRACT FROM AUTHOR]

It is difficult to detect bridges in synthetic aperture radar (SAR) images due to the inherent speckle noise of SAR images, the interference generated by strong coastal scatterers, and the diversity of bridge and coastal terrain morphologies. In this paper, we present a two-step bridge detection method for polarimetric SAR imagery, in which the probability graph model of a Markov tree is used to build the water network, and bridges are detected by traversing the graph of the water network to determine all adjacent water branch pairs. In the step of the water network construction, candidate water branches are first extracted by using a region-based level set segmentation method. The water network is then built globally as a tree by connecting the extracted water branches based on the probabilistic graph model of a Markov tree, in which a node denotes a single branch and an edge denotes the connection of two adjacent branches. In the step of the bridge detection, all adjacent water branch pairs related to bridges are searched by traversing the constructed tree. Each bridge is finally detected by merging the two contours of the corresponding branch pair. Three polarimetric SAR data acquired by RADARSAT-2 covering Singapore and Lingshui, China, and by TerraSAR-X covering Singapore, are used for testing. The experimental results show that the detection rate, the false alarm rate, and the intersection over union (IoU) between the recognized bridge body and the ground truth are all improved by using the proposed method, compared to the method that constructs a water network based on water branches merging by contour distance. [ABSTRACT FROM AUTHOR]

Snail intermediate host monitoring and control are essential for interrupting the parasitic disease schistosomiasis. Identifying large-scale high-risk areas of snail spread after floods has been greatly facilitated by remote sensing imagery. However, previous studies have usually assumed that all inundation areas carry snails and may have overestimated snail spread areas. Furthermore, these studies only used a single environmental factor to estimate the snail survival risk probability, failing to analyze multiple variables, to accurately distinguish the snail survival risk in the snail spread areas. This paper proposes a systematic framework for early monitoring of snail diffusion to accurately map snail spread areas from remote sensing imagery and enhance snail survival risk probability estimation based on the snail spread map. In particular, the flooded areas are extracted using the Sentinel-1 Dual-Polarized Water Index based on synthetic aperture radar images to map all-weather flooding areas. These flood maps are used to extract snail spread areas, based on the assumption that only inundation areas that spatially interacted with (i.e., are close to) the previous snail distribution regions before flooding are identified as snail spread areas, in order to reduce the misclassification in snail spread area identification. A multiple logistic regression model is built to analyze how various types of snail-related environmental factors, including the normalized difference vegetation index (NDVI), wetness, river and channel density, and landscape fractal dimension impact snail survival, and estimate its risk probabilities in snail spread area. An experiment was conducted in Jianghan Plain, China, where snails are predominantly linearly distributed along the tributaries and water channels of the middle and lower reaches of the Yangtze River. The proposed method could accurately map floods under clouds, and a total area of 231.5 km2 was identified as the snail spread area. The snail survival risk probabilities were thus estimated. The proposed method showed a more refined snail spread area and a more reliable degree of snail survival risk compared with those of previous studies. Thus, it is an efficient way to accurately map all-weather snail spread and survival risk probabilities, which is helpful for schistosomiasis interruption. [ABSTRACT FROM AUTHOR]

Landslide susceptibility maps (LSM) are often used by government departments to carry out land use management and planning, which supports decision makers in urban and infrastructure planning. The accuracy of conventional landslide susceptibility maps is often affected by classification errors. Consequently, they become less reliable, which makes it difficult to meet the needs of decision-makers. Therefore, it is proposed in this paper to reduce classification errors and improve LSM reliability by integrating the Small Baseline Subsets-Interferometric Synthetic Aperture Radar (SBAS-InSAR) technique and LSM. By using the logistic regression model (LR) and the support vector machine model (SVM), experiments were conducted to generate LSM in the Dongchuan district. It was classified into five classes: very high susceptibility, high susceptibility, medium susceptibility, low susceptibility, and very low susceptibility. Then, the surface deformation rate of the Dongchuan area was obtained through the ascending and descending orbit sentinel-1A data from January 2018 to January 2021. To correct the classification errors, the SBAS-InSAR technique was integrated into LSM under the optimal model by constructing the contingency matrix. Finally, the LSMs obtained before and after correction were compared. Moreover, the correction results were validated and analyzed by combining remote sensing images, InSAR deformation results, and field surveys. According to the research results, the susceptibility class of 66,094 classification error cells (59.48 km2) was significantly improved in the LSM after the integration of the SBAS-InSAR correction. The enhanced susceptibility classes and the spectral characteristics of remote sensing images are highly consistent with the trends of InSAR cumulative deformation and the results of field investigation. It is suggested that integrating SBAS-InSAR and LSM is effective in correcting classification errors and further improving the reliability of LSM for landslide prediction. The LSM obtained by using this method plays an important role in guiding local government departments on disaster prevention and mitigation, which is conducive to eliminating the risk of landslides. [ABSTRACT FROM AUTHOR]

Built-up areas (BAs) information acquisition is essential to urban planning and sustainable development in the Greater Bay Area in China. In this paper, a pseudo-Siamese dense convolutional network, namely PSDNet, is proposed to automatically extract BAs from the spaceborne synthetic aperture radar (SAR) data in the Greater Bay Area, which considers the spatial statistical features and speckle features in SAR images. The local indicators of spatial association, including Moran's, Geary's, and Getis' together with the speckle divergence feature, are calculated for the SAR data, which can indicate the potential BAs. The amplitude SAR images and the corresponding features are then regarded as the inputs for PSDNet. In this framework, a pseudo-Siamese network can independently learn the BAs discrimination ability from the SAR original amplitude image and the features. The DenseNet is adopted as the backbone network of each channel, which can improve the efficiency while extracting the deep features of the BAs. Moreover, it also has the ability to extract the BAs with multi-scale sizes by using a multi-scale decoder. The Sentinel-1 (S1) SAR data for the Greater Bay Area in China are used for the experimental validation. Our method of BA extraction can achieve above 90% accuracy, which is similar to the current urban extraction product, demonstrating that our method can achieve BA mapping for spaceborne SAR data. [ABSTRACT FROM AUTHOR]

Timely and accurate information on rice cultivation makes important contributions to the profound reform of the global food and agricultural system, and promotes the development of global sustainable agriculture. With all-day and all-weather observing ability, synthetic aperture radar (SAR) can monitor the distribution of rice in tropical and subtropical areas. To solve the problem of misclassification of rice with no marked signal during the flooding period in subtropical hilly areas, this paper proposes a new feature combination and dual branch bi-directional long short-term memory (DB-BiLSTM) model to achieve high-precision rice mapping using Sentinel-1 time series data. Based on field investigation data, the backscatter time series curves of the rice area were analyzed, and a characteristic index (VV − VH)/(VV + VH) (VV: vertical emission and vertical receipt of polarization, VH: vertical emission and horizontal receipt of polarization) for small areas of hilly land was proposed to effectively distinguish rice and non-rice crops with no marked flooding period. The DB-BiLSTM model was designed, ensuring the independent learning of multiple features and effectively combining the time series information of both (VV − VH)/(VV + VH) and VH features. The city of Shanwei, Guangdong Province, China, was selected as the study area. Experimental results showed that the overall accuracy of the rice mapping results was 97.29%, and the kappa coefficient reached 0.9424. Compared to other methods, the rice mapping results obtained by the proposed method maintained good integrity and had less misclassification, which demonstrated the proposed method's practical value in accurate and effective rice mapping tasks. [ABSTRACT FROM AUTHOR]

Landslide extraction is one of the most popular topics in remote sensing. Numerous techniques have been proposed to manage the landslide identification problem. However, most aim to extract landslides that have already occurred or delineate the potential landslide manually. It is greatly important to identify and delineate potential landslides automatically, which has not been investigated. In this paper, we propose an automatic identification and delineation method, i.e., object-based image analysis (OBIA) of potential landslides by integrating optical imagery with a deformation map. We applied a deformation map generated by the interferometric synthetic aperture radar (InSAR) technique, rather than the digital elevation model (DEM) for landslide segmentation. Then, we used a classification and regression tree (CART) model with the spectral, spatial, contextual and deformation characteristics for landslide classification. For accuracy assessment, we implemented the evaluation indicators of recall and precision. The proposed method is verified in both specific landslide-prone regions (Jinpingzi and Shuanglongtan landslides) and a large catchment of the Jinsha River, China. By comparing our results with the ones using purely optical imagery, the precision of the Jinpingzi landslide is improved by 14.12%, and the recall and precision of the Shuanglongtan landslide are improved by 3.1% and 3.6%, respectively, and the recall for the large catchment is improved by 9.95%. Our method can improve delineation of potential landslides significantly, which is crucial for landslide early warning and prevention. [ABSTRACT FROM AUTHOR]

Dalian Jinzhou Bay International Airport (DJBIA) is an offshore artificial island airport, where the reclaimed land is prone to uneven land subsidence due to filling consolidation and construction. Monitoring and predicting the subsidence are essential to assist the subsequent subsidence control and ensure the operational safety of DJBIA. However, the accurate monitoring and prediction of reclaimed subsidence for such a wide area under construction are hard and challenging. This paper utilized the Small Baseline Subset Synthetic Aperture Radar (SBAS-InSAR) technology based on Sentinel-1 images from 2017 to 2021 to obtain the subsidence over the land reclamation area of the DJBIA, in which the results from ascending and descending orbit data were compared to verify the reliability of the results. The SBAS-InSAR results reveal that uneven subsidence is continuously occurring, especially on the runway, terminal, and building area of the airport, with the maximum subsidence rate exceeding 100 mm/year. It was found that there is a strong correlation between the subsidence rate and backfilling time. This study provides important information on the reclaimed subsidence for DJBIA and demonstrates a novel method for reclaimed subsidence monitoring and prediction by integrating the advanced InSAR technology and Terzaghi Consolidation Theory modeling. Moreover, based on the Terzaghi consolidation theory and the corresponding geological parameters of the airport, predicted subsidence curves in this area are derived. The comparison between predicted curves and the actual subsidence revealed by InSAR in 2017–2021 is highly consistent, with a similar trend and falling in a range of ±25 mm/year, which verifies that the subsidence in this area conforms to Terzaghi Consolidation Theory. Therefore, it can be predicted that in the future, the subsidence rate of the new reclamation area in this region will reach about 80 mm/year ± 25 mm/year, and the subsidence rate will gradually slow down with the accumulation of reclamation time. The subsidence rate will slow down to about 30 mm/year ± 25 mm/year after 10 years. [ABSTRACT FROM AUTHOR]

The southwest mountainous area of China is one of the areas with the most landslides in the world. In this paper, we used Ya'an City and Garzê Tibetan Autonomous Prefecture in Sichuan Province as the research areas to explore the identification application effects of large-area potential landslides using synthetic aperture radar (SAR) data with different wavelength types (Sentinel-1, ALOS-2), different processing methods (SBAS-InSAR, Stacking-InSAR), and different geological environmental conditions. The results show the following: (1) The effect of identifying landslides with different slope directions is largely affected by the satellite orbit direction; when we identify landslide hazards across a large area, the joint monitoring mode of ascending and descending orbit data is required. (2) The period of monitoring affects the identification effect of potential landslides when landslide identification is carried out in southwestern China; the InSAR monitoring period is recommended to be more than 2 years. (3) In different geological environmental regions, SBAS technology and Stacking technology have their own advantages; Stacking technology identifies more potential landslides, and SBAS technology identifies potential landslides with higher accuracy; (4) the degree of vegetation coverage has a great impact on the landslide identification effect of different SAR data sources. In low-density vegetation coverage areas, the landslide identification result using Sentinel-1 data seems to be better than the result using ALOS-2 data. In high-density vegetation coverage areas, the landslide identification result using ALOS-2 data is better than that using Sentinel-1 data. [ABSTRACT FROM AUTHOR]

On 23 November 2021, the Gaofen-3-02 (GF3-02) satellite was successfully launched in the Jiuquan Satellite Launch Center of China. The primary payload is C-band Synthetic Aperture Radar (SAR), with a maximum resolution of 1 m, and includes 12 imaging modes such as Spotlight, Strip, and TOPSAR, which will play an essential role in marine environment monitoring. As an important marine environmental parameter, the wind speed accuracy retrieved by GF3-02 SAR directly reflects its performance and effectiveness as an operational product. Therefore, based on the wind data of buoys of the National Data Buoy Center (NDBC), ECMWF reanalysis V5 (ERA5), and HY-2B Scatterometer (SCA), a preliminary accuracy assessment of the wind speed retrieved by GF3-02 SAR is carried out in this paper. The wind speed retrieval accuracy of GF3-02 SAR in the co-polarization (HH+VV) data under different Geophysical Model Functions (GMFs) is discussed by using 478 level-1A Single Look Complex (SLC) ocean products acquired in Quad-Polarization Strip I (QPSI) and produced by the National Satellite Ocean Application Service (NSOAS) from January to March 2022. The results show that the optimal root mean square errors (RMSE) are 1.40 m/s, 1.18 m/s, and 1.24 m/s for the VV polarization and 1.39 m/s, 1.19 m/s, and 1.52 m/s for the HH polarization compared to the NDBC wind speed, the ERA5 wind speed, and the HY-2B SCA wind speed, respectively. The preliminary results show that GF3-02 SAR has good wind speed retrieval ability and can meet the needs of operational products. [ABSTRACT FROM AUTHOR]

Landslides, a major natural geohazard, obstruct municipal constructions and may destroy villages and towns, at worst causing significant casualties and economic losses. Interferometric Synthetic Aperture Radar (InSAR) technique offers distinct advantages on landslide detection and monitoring. In this paper, a more systematic workflow is designed for InSAR study of landslides, in terms of three levels: (i) early detection on regional scale, (ii) three-dimensional (3D) surface displacement rates estimation on detailed scale, and (iii) time series analysis on long-term temporal scale. The proposed workflow is applied for landslide research on the Xiaojiang River Basin, China, using ascending and descending Sentinel-1 images acquired from March 2017 to May 2019. First, the landslide inventory has been mapped and updated using InSAR stacking method, supporting geohazard prevention on a regional scale. A total of 22 active landslides are identified, ranging from medium to super large scale. Compared with the existing inventory, three unrecorded landslides are newly detected by our approach, and five recorded landslides are detected significant expansion of their boundaries. Then, specific to a detected landslide, Baobao landslide, a Total Least Squares–Kalman Filter-based approach is presented. Two outcomes are provided for further spatial-temporal pattern analysis: 3D displacement rates, providing an intuitive insight on the spatial characteristics and sliding direction of landslide, which are analyzed to deep the understanding of its kinematic mechanism, and long-term time series, which contribute to deduce the dynamic evolution of landslide, presenting benefits in landslide forecasting. [ABSTRACT FROM AUTHOR]

This paper describes the C-band multi-polarization Synthetic Aperture Radar (SAR) sensor for the Gaofen-3 (GF-3) mission. Based on the requirement analysis, the design of working modes and SAR payload are given. An accurate antenna model is introduced for the pattern optimization and SAR performance calculation. The paper concludes with an overview of predicted performance which was verified by in-orbit tests. [ABSTRACT FROM AUTHOR]

Usually, the rational polynomial coefficient (RPC) model of spaceborne synthetic aperture radar (SAR) is fitted by the original range Doppler (RD) model. However, the radar signal is affected by two-way atmospheric delay, which causes measurement error in the slant range term of the RD model. In this paper, two atmospheric delay correction methods are proposed for use in terrain-independent RPC fitting: single-scene SAR imaging with a unique atmospheric delay correction parameter (plan 1) and single-scene SAR imaging with spatially varying atmospheric delay correction parameters (plan 2). The feasibility of the two methods was verified by conducting fitting experiments and geometric positioning accuracy verification of the RPC model. The experiments for the GF-3 satellite were performed by using global meteorological data, a global digital elevation model, and ground control data from several regions in China. The experimental results show that it is feasible to use plan 1 or plan 2 to correct the atmospheric delay error, no matter whether in plain, mountainous, or plateau areas. Moreover, the geometric positioning accuracy of the RPC model after correcting the atmospheric delay was improved to better than 3 m. This is of great significance for the efficient and high-precision geometric processing of spaceborne SAR images. [ABSTRACT FROM AUTHOR]

Interests in synthetic aperture radar (SAR) data analysis is driven by the constantly increased spatial resolutions of the acquired images, where the geometries of scene objects can be better defined than in lower resolution data. This paper addresses the problem of the built-up areas extraction in high-resolution (HR) SAR images, which can provide a wealth of information to characterize urban environments. Strong backscattering behavior is one of the distinct characteristics of built-up areas in a SAR image. However, in practical applications, only a small portion of pixels characterizing the built-up areas appears bright. Thus, specific texture measures should be considered for identifying these areas. This paper presents a novel texture measure by combining the proposed labeled co-occurrence matrix technique with the specific spatial variability structure of the considered land-cover type in the fuzzy set theory. The spatial variability is analyzed by means of variogram, which reflects the spatial correlation or non-similarity associated with a particular terrain surface. The derived parameters from the variograms are used to establish fuzzy functions to characterize the built-up class and non built-up class, separately. The proposed technique was tested on TerraSAR-X images acquired of Nanjing (China) and Barcelona (Spain), and on a COSMO-SkyMed image acquired of Hangzhou (China). The obtained classification accuracies point out the effectiveness of the proposed technique in identifying and detecting built-up areas. [ABSTRACT FROM AUTHOR]

Highways built on soft clay subgrade are more prone to subsidence due to the geotechnical characteristics of soft clay. Monitoring ground movements in this area is significant for understanding the deformation dynamics and reducing maintenance cost as well. In this paper, small baseline subset synthetic aperture radar interferometry (SBAS-InSAR) technique is exploited to obtain and investigate the time series ground surface deformation after the construction of a road embankment over soft clay settlement. Considering the important effect of temporal deformation models on the final accuracy of estimated deformation, both the linear velocity model and seasonal deformation model are utilized to conduct the comparative investigation of deformation time series. Two highways in Fuoshan, China—G1501 Guangzhou Belt Highway and Lungui Highway—were selected as the test area. Thirteen TerraSAR-X images acquired from October 2014 to November 2015 were analyzed. Comparative study based on two groups of analyses generated from the two models for both highways were conducted. Consequently, several feature points distributed near the two highways were analyzed in detail to understand the temporal evolution of the settlement. In order to evaluate the reliability of our measurements, the residual phase was analyzed to assess the modelling accuracy of the two models. In addition, leveling data were also used to validate the experimental results. Our measurements suggest that the seasonal model is more suitable for the test highways, with an accuracy of ±3 mm with respect to the leveling results. [ABSTRACT FROM AUTHOR]

Grasslands are one of the most important terrestrial ecosystems on the planet and have significant economic and ecological value. Accurate and rapid discrimination of grassland communities is critical to the conservation and utilization of grassland resources. Previous studies that explored grassland communities were mainly based on field surveys or airborne hyperspectral and high-resolution imagery. Limited by workload and cost, these methods are typically suitable for small areas. Spaceborne mid-resolution RS images (e.g., Sentinel, Landsat) have been widely used for large-scale vegetation observations owing to their large swath width. However, there still keep challenges in accurately distinguishing between different grassland communities using these images because of the strong spectral similarity of different communities and the suboptimal performance of models used for classification. To address this issue, this paper proposed a superpixel-based grassland community classification method using Genetic Programming (GP)-optimized classification model with Sentinel-2 multispectral bands, their derived vegetation indices (VIs) and textural features, and Sentinel-1 Synthetic Aperture Radar (SAR) bands and the derived textural features. The proposed method was evaluated in the Siziwang grassland of China. Our results showed that the addition of VIs and textures, as well as the use of GP-optimized classification models, can significantly contribute to distinguishing grassland communities, and the proposed approach classified the seven communities in Siziwang grassland with an overall accuracy of 84.21% and a kappa coefficient of 0.81. We concluded that the classification method proposed in this paper is capable of distinguishing grassland communities with high accuracy at a regional scale. [ABSTRACT FROM AUTHOR]

Earth Observation (EO) data is a critical information source for mapping and monitoring water resources over large inaccessible regions where hydrological in-situ networks are sparse. In this paper, we present a simple yet robust method for fusing optical and Synthetic Aperture Radar (SAR) data for mapping surface water dynamics over mainland China. This method uses a multivariate logistic regression model to estimate monthly surface water extent over a four-year period (2017 to 2020) from the combined usages of Sentinel-1, Sentinel-2 and Landsat-8 imagery. Multi-seasonal high-resolution images from the Chinese Gaofen satellites are used as a reference for an independent validation showing a high degree of agreement (overall accuracy 94%) across a diversity of climatic and physiographic regions demonstrating potential scalability beyond China. Through inter-comparison with similar global scale products, this paper further shows how this new mapping technique provides improved spatio-temporal characterization of inland water bodies, and for better capturing smaller water bodies (< 0.81 ha in size). The relevance of the results is discussed, and we find this new enhanced monitoring approach has the potential to advance the use of Earth observation for water resource management, planning and reporting. [ABSTRACT FROM AUTHOR]

How to accurately determine the mechanical parameters of rockfill is one of the key issues of concrete-face rockfill dams. Parameter back-analysis using internal or external monitoring data has been proven to be an efficient way to solve this problem. However, traditional internal or external monitoring methods have limitations in efficiency and long-term monitoring. In this paper, the displacement of the Shuibuya concrete-face rockfill dam is monitored by the space-borne Interferometric Synthetic Aperture Radar (InSAR) time series method. Using the InSAR results and the finite element method, the back-analysis of the mechanical parameters of the rockfill dam is investigated, and the back-analysis results of InSAR and levelling are compared. A high correlation of 0.99 for the displacement results generated from InSAR and the levelling offers good agreement between the two methods. The agreement provides confidence that the external InSAR monitoring measurement allows producing a reliable back-analysis and captures the displacement properties of the dam. Based on the identified parameters from the InSAR results, the dam displacement is predicted. The prediction of the maximum settlement of the dam is 2.332 m by the end of 2020, according to the dam displacement characteristics, which agrees well with the results derived from the recorded internal monitoring data. Therefore, the external monitoring results from the InSAR observation can be used as a supplement for traditional monitoring methods to analyse the parameters of the dam. [ABSTRACT FROM AUTHOR]

The coordinated development of the Beijing-Tianjin-Hebei has become a national strategy with Beijing and Tianjin as twin engines driving the regional development. However, the Beijing-Tianjin-Hebei region has suffered dramatic ground subsidence during last two to three decades, mainly due to long-term groundwater withdrawal. Although, annual spirit leveling has been conducted routinely in some parts of Beijing and Tianjin, and InSAR technique has also been used to monitor ground subsidence in some local areas of the region, there is a lack of a complete survey of ground subsidence over the whole region. In this paper, we report a research on mapping ground subsidence in the Beijing-Tianjin-Hebei region over a long time span from 1992 to 2014. Three SAR datasets from four satellites are used: ERS-1/2 SAR images from 1992 to 2000, ENVISAT ASAR images from 2003 to 2010, and RADARSAT-2 images from 2012 to 2014. An improved multi-temporal InSAR method, namely "Multiple-master Coherent Target Small-Baseline InSAR" (MCTSB-InSAR), has been developed to process the datasets. A unique feature of MCTSB-InSAR is the adjustment process useful for wide area monitoring which provides an integrated solution for both calibration of InSAR-derived deformation and the harmonization of the deformation estimates from overlapping SAR frames. Three maps of the subsidence rate corresponding to the three periods over the wide Beijing-Tianjin-Hebei region are generated, with respective accuracy of 8.7 mm/year (1992-2000), 4.7 mm/year (2003-2010), and 5.4 mm/year (2012-2014) validated by more than 120 leveling measurements. The spatial-temporal characteristics of the development of ground subsidence in Beijing and Tianjin are analyzed. This research represents a first-ever effort on mapping ground subsidence over very large area and over long time span in China. The result is of significance to serve the decision-making on ground subsidence mitigation in the Beijing-Tianjin-Hebei region. [ABSTRACT FROM AUTHOR]

Wetlands are important ecosystems as they are known as the "kidney of the earth". Particularly, urban wetlands play an important role in providing both natural and social beneficial services. However, urban wetlands are suffering from various human impacts, such as excessive land use conversion, air and water pollution, especially those in developing countries undergoing rapid industrialization and urbanization. Therefore, it is of great necessity to derive timely biomass information for optimal design, management and protection of urban wetlands. In this paper, we develop a set of models for estimating above ground biomass (AGB) in Xixi National Wetland Park in Hangzhou, China by using optical images and Synthetic Aperture Radar (SAR) images. A series of vegetation indices (VIs) derived from optical data is introduced along with spectral data. The modeling methods consist of (1) curve estimation; (2) linear regression for multivariable model; (3) Back Propagation Neural Network (BPNN) modeling. Curve estimation is a combination of linear and nonlinear regressions. It is applied to generate AGB models from a single variable including Normalized Difference Vegetation Index (NDVI) and radar backscatter coefficient. The models are then compared via three accuracy metrics. According to the results, SAR models generally show better accuracy than optical models and BPNN models show the greatest accuracy among all the models. The BPNN model from the combination of Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and European Remote-Sensing Satellite-2 (ERS-2) SAR (Synthetic Aperture Radar) image has the least root mean square (RMSE, 0.396 kg/m2), least mean absolute error (MAE, 0.256 kg/m2) and the greatest correlation coefficient (0.974). The results indicate that AGB can be estimated by integrating optical and SAR imagery. Four maps of AGB are derived to illustrate the distribution of AGB in the study area. The total AGB in the study area is estimated to be between 165,000 and 210,000 kg/m2. [ABSTRACT FROM AUTHOR]

This paper presents a novel method for extracting the land vertical displacement rates (VDRs) in Shanghai (China) using the multi-platform SAR images collected between 2009 and 2010, i.e., the ascending/descending COSMO-SkyMed (CSK) X-band images and the descending TerraSAR (TSX) X-band images. Different from the conventional approach the proposed method estimates the VDRs by multi-temporal interferometric SAR processing (i.e., temporarily coherent point InSAR, TCPInSAR) and the localized least square (LS) solution, through which the horizontal displacement rates (HDRs) can be also derived as the by-product. The three types of displacement rates in the radar line of sight (LOS) are first estimated by TCPInSAR with use of the ascending/descending CSK and descending TSX data. Both the VDRs and HDRs are then estimated by a localized LS method on the basis of the three types of LOS displacement rates derived by TCPInSAR. For comparison purposes, the VDRs for the single-platform SAR data are also obtained through dividing the LOS displacement rates by the cosine of the radar incidence angle. The analysis with the aid of GPS data shows the horizontal motion due to the geological settings in Shanghai cannot be ignored, and the VDRs derived from the single-platform data are not accurate and reliable without taking into account the horizontal motion. The experimental results indicate the TCPInSAR-LS method can be used to efficiently improve the accuracy in the VDRs by integrating the multi-platform SAR data and considering both horizontal and vertical motion, thus overcoming the disadvantages in the conventional approach. The improved VDRs in Shanghai range between -22.8 and 9.6 mm/year, while the relative east-west motion rates range between -7.2 and 6.2 mm/year, and the relative north--south motion is subtle and can be ignored. Analysis of the improved VDRs shows that a slightly uplifting area of about 70 km² appears in the west downtown of Shanghai, and a subsiding bowl appears in the Hongkou District of Shanghai. The validation indicates that the uplifting trend can be ascribed to the measures conducted by the Shanghai municipal government, i.e., decreasing the groundwater pumping volume and increasing the groundwater recharge volume. [ABSTRACT FROM AUTHOR]

Accurate identification of sandy land plays an important role in sandy land prevention and control. It is difficult to identify the nature of sandy land due to vegetation covering the soil in the sandy area. Therefore, HJ-2A hyperspectral data and GF-3 Synthetic Aperture Radar (SAR) data were used as the main data sources in this article. The advantages of the spectral characteristics of a hyperspectral image and the penetration characteristics of SAR data were used synthetically to carry out mixed-pixel decomposition in the "horizontal" direction and polarization decomposition in the "vertical" direction. The results showed that in the study area of the Otingdag Sandy Land, in China, the accuracy of sandy land detection based on feature-level fusion and single GF-3 data was verified to be 92% in both cases by field data; the accuracy of sandy land detection based on feature-level fusion was verified to be 88.74% by the data collected from Google high-resolution imagery, which was higher than that based on single HJ-2A (74.17%) and single GF-3 data (88.08%). To further verify the universality of the feature-level fusion method for sandy land detection, Alxa sandy land was also used as a verification area and the accuracy of sandy land detection was verified to be as high as 88.74%. The method proposed in this paper made full use of the horizontal and vertical structural information of remote sensing data. The problem of mixed pixels in sparse-vegetation scenes in the horizontal direction and the problem of vegetation covering sandy soil in the vertical direction were both well solved. Accurate identification of sandy land can be realized effectively, which can provide technical support for sandy land prevention and control. [ABSTRACT FROM AUTHOR]

Deformation prediction for a salt solution mining area is essential to mining environmental protection. The combination of Synthetic Aperture Radar Interferometry (InSAR) technique with Probability Integral Method (PIM) has proven to be powerful in predicting mining-induced subsidence. However, traditional mathematical empirical models (such as linear model or linear model combined with periodical function) are mostly used in InSAR approaches, ignoring the underground mining mechanisms, which may limit the accuracy of the retrieved deformations. Inaccurate InSAR deformations will transmit an unavoidable error to the estimated PIM parameters and the forward predicted subsidence, which may induce more significant errors. Besides, theoretical contradictory and non-consistency between InSAR deformation model and future prediction model is another limitation. This paper introduces the Coordinate-Time (CT) function into InSAR deformation modeling. A novel time-series InSAR model (namely, CT-PIM) is proposed as a substitute for traditional InSAR mathematical empirical models and directly applied for future dynamic prediction. The unknown CT-PIM parameters can be estimated directly via InSAR phase observations, which can avoid the error propagation from the InSAR-generated deformations. The new approach has been tested by both simulated and real data experiments over a salt mine in China. The root mean square error (RMSE) is determined as ±10.9 mm, with an improvement of 37.2% compared to traditional static PIM prediction method. The new approach provides a more robust tool for the forecasting of mining-induced hazards in salt solution mining areas, as well as a reference for ensuring the environment protection and safety management. [ABSTRACT FROM AUTHOR]

Lop Nur is a famous dry lake in the arid region of China. It was an important section of the ancient "Silk Road", famous in history as the prosperous communication channel between Eastern and Western cultures. At present, there is no surface water in Lop Nur Lake basin, and on SAR (Synthetic Aperture Radar) images, it looks like an "Ear". The objective of this paper is to interpret the Lop Nur phenomenon from the perspective of scattering mechanisms. Based on field investigation and analysis of sample properties, a two-layer scattering structure is proposed with detailed explanations of scattering mechanisms. In view of the rough surface, the MIEM (Modified Integral Equation Model) was introduced to represent air-surface scattering in Lop Nur. Then, a two-layer scattering model was developed which can describe surface scattering contribution. Using polarimetric decomposition, validations were carried out, and the RMSE (root mean square error) values for the HH and VV polarizations were found to be 1.67 dB and 1.06 dB, respectively. Furthermore, according to model parametric analysis, surface roughness was identified as an apparent reason for the "Ear" feature. In addition, the polarimetric decomposition result also showed that the volume scattering part had rich texture information and could portray the "Ear" feature exactly compared with the other two parts. It is maintained that subsurface properties, mainly generating volume scattering, can determine the surface roughness under the certain climate conditions, according to geomorphological dynamics, which can help to develop an inversion technology for Lop Nur. [ABSTRACT FROM AUTHOR]

Tomographic Synthetic Aperture Radar (TomoSAR) is a breakthrough of the traditional SAR, which has the three-dimentional (3D) observation ability of layover scenes such as buildings and high mountains. As an advanced system, the airborne array TomoSAR can effectively avoid temporal de-correlation caused by long revisit time, which has great application in high-precision mountain surveying and mapping. The 3D reconstruction using TomoSAR has mainly focused on low targets, while there are few literatures on 3D mountain reconstruction. Due to the layover phenomenon, surveying in high mountain areas remains a difficult task. Consequently, it is meaningful to carry out the research on 3D mountain reconstruction using the airborne array TomoSAR. However, the original TomoSAR mountain point cloud faces the problem of elevation ambiguity. Furthermore, for mountains with complex terrain, the points located in different elevation periods may intersect. This phenomenon increases the difficulty of solving the problem. In this paper, a novel elevation ambiguity resolution method is proposed. First, Density-Based Spatial Clustering of Applications with Noise (DBSCAN) and Gaussian Mixture Model (GMM) are combined for point cloud segmentation. The former ensures coarse segmentation based on density, and the latter allows fine segmentation of the abnormal categories caused by intersection. Subsequently, the segmentation results are reorganized in the elevation direction to reconstruct all possible point clouds. Finally, the real point cloud can be extracted automatically under the constraints of the boundary and elevation continuity. The performance of the proposed method is demonstrated by simulations and experiments. Based on the airborne array TomoSAR experiment in Leshan City, Sichuan Province, China in 2019, the 3D model of the surveyed mountain is presented. Moreover, three kinds of external data are applied to fully verify the validity of this method. [ABSTRACT FROM AUTHOR]

A series of small-magnitude earthquakes (Mw 2.9~Mw 4.9) occurred in Rong County, Sichuan Province, China between 30 March 2018 and December 2020, which threatened the safety of local residents. Determining the surface displacement and estimating the damage caused by these earthquakes are significant for earthquake relief, post-earthquake disaster assessment and hazard elimination. This paper integrates the Generic Atmospheric Correction Online Service (GACOS) with interferometry synthetic aperture radar (InSAR) to accurately detect the displacement of the series of small-magnitude earthquakes in Rong County based on 45 Sentinel-1 ascending/descending images acquired from January 2018 to December 2020. We analyze the influence of some factors involved in surface displacement, including earthquake magnitude, focal depth and the distance from the epicenter to the fault. The above measurement for small-magnitude earthquakes and statistics analysis for the displacement have not been performed before, so this can help better understand the displacement features of small-magnitude earthquakes, which are important for post-earthquake hazard assessment and disaster prevention. [ABSTRACT FROM AUTHOR]