Search

In most industrialized countries, power transformers built several decades ago are approaching the end of their operational lifespan. The ongoing energy transition, focused on developing 100% renewable energy sources and accelerating global transportation electrification, further exacerbates these assets. Combined with rising electricity demand, there is an increasing risk of critical transformers' degradation acceleration. In this context, understanding the aging mechanisms of the insulation system inside these essential assets, which form the core of every energy network, becomes paramount for today's managers and engineers responsible for their operations. The acids generated through oil oxidation can be classified into two categories: low molecular weight acids (LMAs), which are inherently more hydrophilic and consequently have a greater impact on the degradation rate of solid insulation through hydrolysis, and high molecular weight acids (HMAs), which do not significantly contribute to the degradation of paper insulation. This study specifically addresses the impact of acids generated through oil oxidation—focusing on LMAs. New oil samples were infused with different ratios of LMAs before impregnation. The impregnated paper samples underwent thermal aging at 115 °C. Different physicochemical and dielectric properties were investigated. The investigations revealed that oils blended with formic acid exhibited more adverse effects on the insulation system compared to other LMAs. This information is essential for industry professionals seeking to mitigate the risks associated with transformer degradation and extend the lifespan of these critical assets during the energy transition. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

Bio-based monomers represent the future market for polymer chemistry, since the political economics of different states promote green ventures toward more sustainable materials and processes. Industrial pulp and paper processing represent a large market that could advance the use of by-products to avoid waste production and reduce pollution. Lignin represents the most available side product that can be used to produce a bio-based monomer. This review is concentrated on the possibility of using bio-based monomer derivates from pulp and the paper industry for UV-curing processing. UV-curing represents the new frontier for thermoset production, allowing a fast reaction cure, less energy demand, and the elimination of solvent. The growing demand for new monomers increases research in the environmental field to substitute for petroleum-based products. This review provides an overview of the main monomers and relative families of compounds derived from industrial processes that are suitable for UV-curing. Particular focus is given to the developments reached in the last few years concerning lignin, rosin and terpenes and the related possible applications of these in UV-curing chemistry. [ABSTRACT FROM AUTHOR]

In this paper, a systematic literature review is presented, through a survey of the main digital databases, regarding modelling methods for Short-Term Load Forecasting (STLF) for hourly electricity demand for residential electricity and to realize the performance evolution and impact of Artificial Intelligence (AI) in STLF. With these specific objectives, a conceptual framework on the subject was developed, along with a systematic review of the literature based on scientific publications with high impact and a bibliometric study directed towards the scientific production of AI and STLF. The review of research articles over a 10-year period, which took place between 2012 and 2022, used the Preferred Reporting Items for Systematic and Meta-Analyses (PRISMA) method. This research resulted in more than 300 articles, available in four databases: Web of Science, IEEE Xplore, Scopus, and Science Direct. The research was organized around three central themes, which were defined through the following keywords: STLF, Electricity, and Residential, along with their corresponding synonyms. In total, 334 research articles were analyzed, and the year of publication, journal, author, geography by continent and country, and the area of application were identified. Of the 335 documents found in the initial research and after applying the inclusion/exclusion criteria, which allowed delimiting the subject addressed in the topics of interest for analysis, 38 (thirty-eight) documents were in English (26 journal articles and 12 conference papers). The results point to a diversity of modelling techniques and associated algorithms. The corresponding performance was measured with different metrics and, therefore, cannot be compared directly. Hence, it is desirable to have a unified dataset, together with a set of benchmarks with well-defined metrics for a clear comparison of all the modelling techniques and the corresponding algorithms. [ABSTRACT FROM AUTHOR]

Accurate forecasting of electric vehicle (EV) power consumption per unit mileage serves as the cornerstone for determining diurnal variations in EV charging loads. To enhance the prediction accuracy of EV power consumption per unit mileage, this paper proposes a modelling method grounded in an improved Ant Colony Optimization-Support Vector Regression (ACO-SVR) framework. This method integrates the effects of both temperature and speed on the power consumption per unit mileage of EVs. Initially, we analyze the influence mechanism of driving speed and ambient temperature on EV power consumption, elucidating the relationship between power consumption per unit mileage and these factors. Subsequently, we construct an ACO-SVR model utilizing an improved ant colony optimization algorithm, fitting the relationship between power consumption, speed, and temperature to derive the EV power consumption per unit mileage model. Finally, leveraging operational data from EVs in Guangdong, Hong Kong, and Macao as a case study, we validate the energy consumption model of EVs by considering factors such as ambient temperature and driving speed. The results demonstrate that the model proposed in this paper is both accurate and effective. [ABSTRACT FROM AUTHOR]

Non-invasive load monitoring (NILM) deduces changes in energy consumption patterns and operational statuses of electrical equipment from power signals in the feed line. With the emergence of fine-grained power load distribution, the importance of utilizing this technology for implementing demand-side energy management in smart grid development has become increasingly prominent. To address the issue of low load identification accuracy stemming from complex and diverse load types, this paper introduces a NILM method based on uniform manifold approximation and projection (UMAP) reduction and enhanced density-based spatial clustering of applications with noise (DBSCAN). Firstly, this paper combines the characteristics of user load under transient and steady-state conditions and selects data with significant differences to construct a load-characteristic database. Additionally, UMAP is employed to reduce the dimensionality of high-dimensional load features and rebuild a load feature database. Subsequently, DBSCAN is utilized to categorize typical user loads, followed by a correlation analysis with the load-characteristic database to determine the types or classes of loads that involve switching actions. Finally, this paper simulates and analyzes the proposed method using the electricity consumption data of industrial users from the CER–Electricity–Data dataset. It identifies the electricity load data commonly utilized by users in a specific area of Zhejiang Province in China. The experimental results indicate that the accuracy of the proposed non-invasive load identification method reaches 95%. Compared to the wavelet transform, decision tree, and backpropagation network methods, the improvement is approximately 5%. [ABSTRACT FROM AUTHOR]

Smart meters for measuring electricity consumption are fast becoming prevalent in households. The meters measure consumption on a very fine scale, usually on a 15 min basis, and the data give unprecedented granularity of consumption patterns at household level. A multitude of papers have emerged utilizing smart meter data for deepening our knowledge of consumption patterns. This paper applies a modification of Okoli’s method for conducting structured literature reviews to generate an overview of research in electricity customer classification using smart meter data. The process assessed 2099 papers before identifying 34 significant papers, and highlights three key points: prominent methods, datasets and application. Three important findings are outlined. First, only a few papers contemplate future applications of the classification, rendering papers relevant only in a classification setting. Second; the encountered classification methods do not consider correlation or time series analysis when classifying. The identified papers fail to thoroughly analyze the statistical properties of the data, investigations that could potentially improve classification performance. Third, the description of the data utilized is of varying quality, with only 50% acknowledging missing values impact on the final sample size. A data description score for assessing the quality in data description has been developed and applied to all papers reviewed. [ABSTRACT FROM AUTHOR]

The European Union, in pursuit of the goal of reducing emissions by at least 55% by 2030 and achieving climate neutrality by 2050, is deploying different actions, with industry decarbonization as a key strategy. However, increasing electricity demand requires an intensification of energy generation from clean technologies, and the energy system's expansion is hindered by renewable generation's climatic dependencies and the imperative for substantial electrical infrastructure investments. Although the transmission grid is expected to grow, flexibility mechanisms and innovative technologies need to be applied to avoid an overwhelming growth. In this context, this paper presents a thorough assessment, conducted within the FLEXINDUSTRIES project, of the flexibility potential across seven energy-intensive industries (automotive industry, biofuel production, polymer manufacturing, steel manufacturing, paper mills, pharmaceutical industry, and cement production). The methodology followed during the analysis entails reviewing the state-of-the-art existing flexibility mechanisms, industries' energy markets engagement, and technical/operational readiness. The results highlight the feasibility of the proposed actions for enabling energy market flexibility through demand-response programs, quantifying energy opportunities, and pinpointing regulatory and technical barriers. [ABSTRACT FROM AUTHOR]

A reasonable allocation of production schedules and savings in overall electricity costs are crucial for large manufacturing conglomerates. In this study, we develop an optimization model of off-site industrial production scheduling to address the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's power supply, and the difficulty in promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and variations in electricity prices in different places to optimize the scheduling of industrial production in various locations. The model is embedded with two sub-models, i.e., an electricity price prediction model and a distributed photovoltaic power cost model to complete the model parameters, in which the electricity price prediction model utilizes a Long Short-Term Memory (LSTM) neural network. Then, the particle swarm optimization algorithm is used to solve the optimization model. Finally, the production data of two off-site pharmaceutical factories belonging to the same large group of enterprises are substituted into the model for example analysis, and it is concluded that the optimization model can significantly reduce the electricity consumption costs of the enterprises by about 7.9%. This verifies the effectiveness of the optimization model established in this paper in reducing the cost of electricity consumption on the demand side. [ABSTRACT FROM AUTHOR]

The three-phase imbalance in low-voltage distribution networks (LVDNs) seriously threatens the security and stability of the power system. At present, a standard solution is automatic phase commutation, but this method has limitations because it does not address the branch imbalance and premature convergence or instability of the commutation algorithm. Therefore, this paper proposes a novel refined regulation commutation system, combined with a modified optimized commutation algorithm, and designs a model and simulation for feasibility verification. The refined regulatory model incorporates branch control units into the traditional commutation system. This effectively disperses the main controller's functions to each branch and collaborates with intelligent fusion terminals for precise adjustment. The commutation algorithm designed in this paper, combined with the above model, adopts strategies such as symbol encoding, cubic chaotic mapping, and adaptive adjustment based on traditional genetic algorithms. In addition, in order to verify the effectiveness of the proposed method, this paper establishes a mathematical model with the minimum three-phase imbalance and commutation frequency as objectives and establishes a simulation model. The results of the simulation demonstrate that this method can successfully lower the three-phase imbalance of the low-voltage distribution network. It leads to a decrease of the main circuit's three-phase load imbalance rate from 27% to 6% and reduces each branch line's three-phase imbalance ratio to below 10%. After applying the method proposed in this paper, the main and branches circuit three-phase imbalance are both lower than the limit ratio of the LVDNs, which can improve the quality and safety of electricity consumption. Additionally, the results also prove that the commutation algorithm under this method has faster convergence speed, better application effect, and better stability, which has promotion and application value. [ABSTRACT FROM AUTHOR]

This paper provides a comparative analysis of AES (Advanced Encryption Standard) and Salsa20 algorithm implementations, focusing on power consumption efficiency in passive RFID (radio-frequency identification) tags and ultra-low-power devices. The main objective of this work is to determine which of these algorithms is more suitable to operate in these types of devices. For this purpose, ASIC (application-specific integrated circuit) implementations of AES and Salsa20 based on low-power approaches were developed and their power consumption was evaluated. The results demonstrate that Salsa20 power consumption is lower than AES (about 17%), indicating that Salsa20 is a much better choice than AES for passive RFID tags. [ABSTRACT FROM AUTHOR]

The digitization of distribution power systems has revolutionized the way data are collected and analyzed. In this paper, the critical task of harnessing this information to identify irregularities and anomalies in electricity consumption is tackled. The focus is on detecting non-technical losses (NTLs) and energy theft within distribution networks. A comprehensive overview of the methodologies employed to uncover NTLs and energy theft is presented, leveraging measurements of electricity consumption. The most common scenarios and prevalent cases of anomalies and theft among consumers are identified. Additionally, statistical indicators tailored to specific anomalies are proposed. In this research paper, the practical implementation of numerous artificial intelligence (AI) algorithms, including the artificial neural network (ANN), ANFIS, autoencoder neural network, and K-mean clustering, is highlighted. These algorithms play a central role in our research, and our primary objective is to showcase their effectiveness in identifying NTLs. Real-world data sourced directly from distribution networks are utilized. Additionally, we carefully assess how well statistical methods work and compare them to AI techniques by testing them with real data. The artificial neural network (ANN) accurately identifies various consumer types, exhibiting a frequency error of 7.62%. In contrast, the K-means algorithm shows a slightly higher frequency error of 9.26%, while the adaptive neuro-fuzzy inference system (ANFIS) fails to detect the initial anomaly type, resulting in a frequency error of 11.11%. Our research suggests that AI can make finding irregularities in electricity consumption even more effective. This approach, especially when using data from smart meters, can help us discover problems and safeguard distribution networks. [ABSTRACT FROM AUTHOR]

In order to reduce the peak–valley difference of the power grid load, reasonably arrange users' electricity consumption time and realize the intelligent management of the power grid, we construct a user electricity consumption information acquisition system based on unmanned aerial vehicles (UAVs) by using a sensor network. In order to improve the service quality of the system and reduce the system delay, this paper comprehensively considers the factors that affect the user's electricity consumption information collection system, such as the UAV trajectory, the unloading decision of the data receiving point and so on. Therefore, this paper puts forward an effective iterative optimization algorithm for joint UAV trajectory and unloading decisions based on a deep Q network (DQN), in order to obtain the optimal UAV trajectory and unloading decision design, acquire the optimal solution to minimize the time delay of the monitoring system and maximize the service quality of the user electricity information collection system, thus ensuring the stable operation of the user electricity information collection system. In this paper, different complexity algorithms are used to solve this problem. Compared with the greedy algorithm, the proposed algorithm, CDQN, improves the system service quality by approximately 2 % and reduces the system delay by approximately 16 % , so that the user's electricity consumption information can be analyzed and processed faster. [ABSTRACT FROM AUTHOR]

The ongoing electrification of the transport sector is expected to cause an increase in electricity demand and, therefore, trigger significant network investments to accommodate it. This paper focuses on investment decision-making for electricity distribution grids and specifically on the strategic and incremental investment network planning approaches. In particular, the former involves network planning with the consideration of a long-term multi-stage study horizon, as opposed to a shorter–term view of the future that applies to the latter case. An investment analysis that is carried out underlines the economic savings generated from adopting a strategic investment perspective over an incremental one. These economic savings are achieved from the fact that the associated fixed investment costs are incurred only once in the horizon under strategic planning. On the other hand, incremental planning involves a series of network reinforcement decisions, thereby incurring the fixed cost multiple times. In addition, sensitivity analyses that are carried out capture the effect of key parameters, such as investment cost, discount rate and investment delay, on the generated economic savings. [ABSTRACT FROM AUTHOR]

The non-technical losses caused by abnormal power consumption behavior of power users seriously affect the revenue of power companies and the quality of power supply. To assist electric power companies in improving the efficiency of power consumption audit and regulating the power consumption behavior of users, this paper proposes a power consumption anomaly detection method named High-LowDAAE (Autoencoder model for dual adversarial training of high low-level temporal features). High-LowDAAE adds an extra "discriminator" named AE3 to USAD (UnSupervised Anomaly Detection on Multivariate Time Series), which performs the same function as AE2 in USAD. AE3 performs the same function as AE2 in USAD, i.e., it is trained against AE1 to enhance its ability to reconstruct average data. However, AE3 differs from AE2 because the two "discriminators" correspond to the high-level and low-level time series features output from the shared encoder network. By utilizing different levels of temporal features to reconstruct the data and conducting adversarial training, AE1 can reconstruct the time-series data more efficiently, thus improving the accuracy of detecting abnormal electricity usage. In addition, to enhance the model's feature extraction ability for time-series data, the self-encoder is constructed with a long short-term memory (LSTM) network, and the fully connected layer in the USAD model is no longer used. This modification improves the extraction of temporal features and provides richer hidden features for the adversarial training of the dual "discriminators". Finally, the ablation and comparison experiments are conducted using accurate electricity consumption data from users, and the results show that the proposed method has higher accuracy. [ABSTRACT FROM AUTHOR]

Time series data analysis and forecasting have recently received considerable attention, supporting new technology development trends for predicting load fluctuations or uncertainty conditions in many domains. In particular, when the load is small, such as a building, the effect of load fluctuation on the total load is relatively large compared to the power system, except for specific factors, and the amount is very difficult to quantify. Recently, accurate power consumption prediction has become an important issue in the Internet of Things (IoT) environment. In this paper, a traditional time series prediction method was applied and a new model and scientific approach were used for power prediction in IoT and big data environments. To this end, to obtain data used in real life, the power consumption of commercial refrigerators was continuously collected at 15 min intervals, and prediction results were obtained by applying time series prediction methods (e.g., RNN, LSTM, and GRU). At this time, the seasonality and periodicity of electricity use were also analyzed. In this paper, we propose a method to improve the performance of the model by classifying power consumption into three classes: weekday, Saturday, and Sunday. Finally, we propose a method for predicting power consumption using a new type of ensemble model combined with three time series methods. Experimental results confirmed the accuracy of RNN (i.e., 96.1%), LSTM (i.e., 96.9%), and GRU (i.e., 96.4%). In addition, it was confirmed that the ensemble model combining the three time series models showed 98.43% accuracy in predicting power consumption. Through these experiments and approaches, scientific achievements for time series data analysis through real data were accomplished, which provided an opportunity to once again identify the need for continuous real-time power consumption monitoring. [ABSTRACT FROM AUTHOR]

Under the urban development trend of sprawl, improving energy use efficiency is a proper way to promote green and low-carbon construction in cities. This paper uses panel data from 283 prefecture-level and above cities in China from 2008 to 2019 to measure the urban sprawl index, and analyze the spatial-temporal evolution law of urban sprawl and electricity consumption. The relationship between urban sprawl and electricity consumption is empirically examined, and the differential effect of urban sprawl on electricity consumption is analyzed. Finally, the impact of urban sprawl on electricity consumption based on a spatial perspective is explored in depth by establishing a spatial error model. We found the following: (1) The levels of urban sprawl and urban electricity consumption are on the rise. The spatial distribution of urban sprawl is more dispersed, and cities with high electricity consumption levels are mostly concentrated in the eastern coastal areas. (2) Urban sprawl exacerbates electricity consumption, and this conclusion is still robust after a series of robustness tests were conducted and endogeneity issues were taken into account. In terms of the influence mechanism, urban sprawl mainly affects electricity consumption by changing the allocation of land resources, increasing the dependence on private transportation, and inhibiting green technology innovation. (3) The incremental effect of urban sprawl on electricity consumption is more pronounced in cities with high sprawl levels, weak environmental regulations, and low green innovation levels, as well as in west cities. (4) Urban sprawl and electricity consumption both have a significant positive spatial correlation. Electricity consumption of cities is not only related to their own regions but also influenced by the adjacent regions, and the spatial correlation is mainly reflected in the random error term. This paper deepens the understanding of the basic laws of urban sprawl affecting urban low-carbon development, which also has implications for new urbanization strategies and green development. [ABSTRACT FROM AUTHOR]

The paper presents a novel charging load prediction model for electric vehicles that takes into account traffic conditions and ambient temperature, which are often overlooked in conventional EV load prediction models. Additionally, the paper investigates the impact of disordered charging on distribution networks. Firstly, the paper creates a traffic road network topology and speed-flow model to accurately simulate the driving status of EVs on real road networks. Next, we calculate the electric vehicle power consumption per unit kilometer by considering the effects of temperature and vehicle speed on electricity consumption. Then, we combine the vehicle's main parameters to create a single electric vehicle charging model, use the Monte Carlo method to simulate electric vehicle travel behavior and charging, and obtain the spatial and temporal distribution of total charging load. Finally, the actual traffic road network and typical distribution network in northern China are used to analyze charging load forecast estimates for each typical functional area under real vehicle–road circumstances. The results show that the charging load demand in different areas has obvious spatial and temporal distribution characteristics and differences, and traffic conditions and temperature factors have a significant impact on electric vehicle charging load. [ABSTRACT FROM AUTHOR]

Electricity consumption in buildings is one of the major causes of energy usage and knowledge of this can help building owners and users increase energy efficiency and conservation efforts. For Pacific Island countries, building electricity demand data is not readily accessible or available for constructing models to predict electricity demand. This paper starts to fill this gap by studying the case of schools in Fiji. The aim of the paper is to assess the factors affecting electricity demand for grid-connected Fijian schools and use this assessment to build mathematical models (multiple linear regression (MLR) and artificial neural network (ANN)) to predict electricity consumption. The average grid-connected electricity demand in kWh/year was 1411 for early childhood education schools, 5403 for primary schools, and 23,895 for secondary schools. For predicting electricity demand (ED) for all grid-connected schools, the stepwise MLR model shows that taking logarithm transformations on both the dependent variable and independent variables (number of students, lights, and air conditioning systems) yields statistically significant independent variables with an R2 value of 73.3% and RMSE of 0.2248. To improve the predicting performance, ANN models were constructed on both the natural form of variables and transformed variables. The optimum ANN model had an R2 value of 95.3% and an RMSE of 59.4 kWh/year. The findings of this study can assist schools in putting measures in place to reduce their electricity demand, associated costs, and carbon footprint, as well as help government ministries make better-informed policies. [ABSTRACT FROM AUTHOR]

To support increasing renewable capacity for a net-zero future, energy storage will play a key role in maintaining grid stability. In this paper, all current and near-future energy storage technologies are compared for three different scenarios: (1) fixed electricity buy-in price, (2) market-based electricity buy-in price, and (3) energy storage integrated into a fully renewable electricity system. In the first part of this study, an algorithm is devised to simulate strategic buy-in of electricity for energy storage. This analysis yields a qualitative decision-making tool for a given energy storage duration and size. Building upon the first part's findings, an integration study gives insight into expected power prices and expected storage size in a typical northwestern European fully renewable energy system. The integration study shows significant need for electricity storage with durations spanning from one to several days, typically around 40 h. Pumped Hydro Storage and Pumped Thermal storage surface as the best options. The overall levelized costs of storage are expected to be in the USD 200–500/MWh range. Integration of storage with renewables can yield a system-levelized cost of electricity of about USD 150/MWh. Allowing flexibility in demand may lower the overall system-levelized cost of electricity to USD 100/MWh. [ABSTRACT FROM AUTHOR]

The built-in relay in a meter is a key control component of a smart meter, and its reliability determines whether the user can use electricity safely and smoothly. In this paper, the degradation characteristics of the arc-burning energy are enhanced by the method of K-means clustering to replace degradation data, such as the overtravel time, release time, and other data. In existing methods, the meter needs to be disassembled to describe the degradation trend of the meter relay. The proposed method is combined with a bidirectional long short-term memory (Bi-LSTM) neural network to predict the degradation trend of the relay's performance. In this paper, K-means clustering is used to enhance the extraction of arc energy data features, and then the arc energy data obtained from the reliability lifetime test is assessed to predict the degradation trend of the meter relay by means of a bidirectional LSTM. [ABSTRACT FROM AUTHOR]

This paper presents the application of an energy characterization method based on the ISO 50001 standard in a dry paper production plant. This plant operates using electricity, gas, and coal as energy sources. The last two energy sources are used to produce the steam and hot air used in the paper drying process. Through energy characterization, indicators such as energy baseline and consumption indicators were calculated for the plant, with which improvement opportunities were identified. These improvement opportunities were used as case studies for each energy source used and were based on the actual state of the plant. 2011 Midpoint+ ILCD method data was selected from the Ecoinvent database, using OpenLCA 1.7.0 for the energy assessment. The impact categories analyzed in this study were ecotoxicity, eutrophication of rivers and seas, climate change, and human toxicity. As a result of this work, it was found that energy-saving was possible by adjusting the production rate to a load factor of 77%, which implies a gas consumption of 1.6 kWh/kg and a value in the climate change category of 88.5 kg of CO2 equivalent. In addition, some technological improvement opportunities were economical and environmentally evaluated as a result of the sustainable improvement strategy implemented with energy management and life cycle assessment. The study of these technological opportunities showed that in order to achieve a sustainable industrial process, it is important to take into account energy, economic, and environmental criteria in the continuous improvement of the paper production process. In addition, it is of vital importance to analyze alternatives for technological change, which have a greater impact than operational alternatives according to energy, environmental and economic criteria. [ABSTRACT FROM AUTHOR]

With the rapid development of distribution networks and increasing demand for electricity, the pressure of power supply for medium- and low-voltage distribution networks (M&LVDNs) is increasingly significant, especially considering the large scale of customers at the low-voltage (LV) level. In this paper, an outage sequence optimization method for low-voltage distribution networks (LVDNs) that considers the importance of users is proposed. The method aims to develop an optimal outage sequence strategy for LV customers in case of medium-voltage (MV) failure events. First, a multi-dimensional importance indicator system for LV users is constructed, and the customers are ranked using a modified Analytic Hierarchy Process–Entropy Weight (AHP-EW) method to determine their priorities during outages. Then, an elastic net regression-based method is used to identify the topology of the LV network. Finally, an outage sequence optimization model based on the user importance is proposed to reduce the load-shedding level. Extensive case studies are conducted in the modified LV distribution network. The results show that the proposed method results in fewer outage losses throughout the restoration periods than traditional methods and effectively improves the reliability of the power supply to LV users. [ABSTRACT FROM AUTHOR]

This paper examines the influence of building characteristics, occupant demographics and behaviour on gas and electricity consumption, differentiating between family groups; homes with children; homes with elderly; and homes without either. Both regression and Lasso regression analyses are used to analyse data from a 2019 UK-based survey of 4358homes (n = 1576 with children, n = 436 with elderly, n = 2330 without either). Three models (building, occupants, behaviour) were tested against electricity and gas consumption for each group. Results indicated that homes without children or elderly consumed the least energy. Property Type emerged as the strongest predictor in the Building Model (except for homes with elderly), while Current Energy Efficiency was less significant, particularly for homes with elderly occupants. Homeownership and number of occupants were the most influential factors in the Occupants Model, though this pattern did not hold for homes with elderly. Many occupant and behaviour variables are often considered 'unregulated energy' in calculations such as SAP and are thus typically disregarded. However, this study found these variables to be significant, especially as national standards improve. The findings suggest that incorporating occupant behaviour into energy modelling could help reduce the energy performance gap. [ABSTRACT FROM AUTHOR]

Despite its high share in national energy demand, the tertiary sector is an undifferentiated residual in the energy balances of most countries. To develop effective policy measures for enhancing energy efficiency, policymakers need a sound understanding of how the energy demand is structured. To date, only a few studies assess energy demand in the tertiary sector quantitatively. This paper aims to close this gap by introducing an integrated model that transparently breaks down the energy demand according to statistical subsectors, energy carriers and end-uses. The model combines a technology-based bottom-up with a top-down approach and applies it to a case study on Germany based on survey data from companies. Model validity is analyzed using a set of indicators. The results for Germany show that the model is consistent with the national energy balance showing an aggregate deviation of only 1%. The results for 2019 indicate that electricity demand in Germany's tertiary sector is dominated by lighting (35%), information and communication technologies (33%) and the provision of mechanical energy (9%), while fuel demand is mainly due to space heating (78%), followed by mechanical energy (15%). [ABSTRACT FROM AUTHOR]

Electric bicycles offer convenient short-distance travel, but improper battery charging poses a fire risk, especially indoors, potentially causing significant accidents, property damage, and even threats to life. Recognizing the charging state of electric bicycle batteries is crucial for safety. This paper proposes a novel method to identify the charging process of lithium batteries in electric bicycles. Methods that do not require physical alterations to the equipment are used to acquire users' electricity consumption data, with current signals preprocessed and input into a combined model integrating convolutional neural networks (CNN) and bidirectional long short-term memory (BiLSTM) networks. The proposed model captures complex patterns and features in the charging data, effectively identifying the charging characteristics of lithium batteries. Validation using NASA's lithium battery dataset and real experimental data shows that the combined model achieves recognition accuracy of 96% and 97% on training data and 93% and 94% on validation data. Further validation under multiple device loads and comparison with other models indicate that the proposed method is highly accurate, outperforming traditional CNN and LSTM models by 4–9%. This research enhances the safety and regulation of electric bicycle battery charging and provides a reliable method for non-intrusive load identification in smart monitoring systems, contributing to improved safety measures and energy management in residential environments. [ABSTRACT FROM AUTHOR]

To accommodate the rapid development of the distribution network of China, it is essential to research load forecasting methods with higher accuracy and stronger generalization capabilities in order to optimize distribution system control strategies, ensure the efficient and reliable operation of the power system, and provide a stable power supply to users. In this paper, a short-term load forecasting method is proposed for low-voltage distribution substations based on the bidirectional long short-term memory (BiLSTM) model. First, principal component analysis (PCA) and the fuzzy C-means method based on a genetic algorithm (GA-FCM) are used to extract the main influencing factors and classify different types of user electricity consumption behaviors. Then, the BiLSTM forecasting model utilizing the stochastic weight averaging (SWA) algorithm to enhance generalization capability is constructed. Finally, the load data from a low-voltage distribution substation in China over recent years are selected as a case study. Compared with conventional LSTM and BiLSTM prediction models, the annual electricity load curves for various user types forecasted by the PCA-BiLSTM model are more closely aligned with actual data curves. The proposed BiLSTM forecasting model exhibits higher accuracy and can forecast user electricity consumption data that more accurately reflect real-life usage. [ABSTRACT FROM AUTHOR]

The objective of this paper is to study smart home network systems and the application of LabVIEW to develop a human machine interface (HMI), so that traditional instrument panels can be replaced with virtual panels to reduce the consumption of hardware resources. For energy efficiency, MATLAB's fuzzy toolbox is used as the computing center, which is applied to the lighting system and air-conditioning system. This paper also uses LabVIEW's common gateway interface (CGI) tools to develop remote monitoring functions, as well as to embed the network-related syntax into the web pages. The user can not only use computer equipment, but can also use their mobile devices to connect to the networks and conduct remote monitoring, which enhances convenience and security. This paper is finally tested with actual cases, and the electricity consumption with and without fuzzy logic control is compared. The test results show that fuzzy logic control can reduce electricity consumption. As well as using computers to test the remote monitoring functions, cell phones and pads were used. [ABSTRACT FROM AUTHOR]

Renewable energy resources can be deployed locally and efficiently using the concept of microgrids. Due to the natural uncertainty of the output power of renewable energy resources, the planning for a proper operation of microgrids can be a challenging task. In addition, the information about the loads and the power consumption of them can create benefits to increase the efficiency of the microgrids. However, electrical loads can have uncertainty due to reasons such as unpredictable behavior of the consumers. To exploit a microgrid, energy management is required at the upper level of operation and control in order to reduce the costs. One of the most important tasks of the energy management system is to satisfy the loads and, in other words, develop a plan to maintain equilibrium between the power generation and power consumption. To obtain information about the output power of renewable energy resources and power consumption, deep learning can be implemented as a powerful tool, which is able to predict the desired values. In addition, weather conditions can affect the output power of renewable energy-based resources and the behavior of the consumers and, as a result, the power consumption. So, deep learning can be deployed for the anticipation of the weather conditions. This paper will study the recent works related to deep learning, which has been implemented for the prediction of the output power of renewable energy resources (i.e., PVs and wind turbines), electrical loads, and weather conditions (i.e., solar irradiance and wind speed). In addition, for possible future directions some strategies are suggested, the most important of which is the implementation of quantum computing in cyber–physical microgrids. [ABSTRACT FROM AUTHOR]

This paper describes research on the influence the technology of zinc-coated steel wire manufacturing has on the energy and force parameters of the drawing process, energy consumption and zinc expenditure. In the theoretical part of the paper, the theoretical work and drawing power were calculated. Calculations of the electric energy consumption have shown that usage of the optimal wire drawing technology results in a 37% drop in energy consumption, which in the course of a single year translates to savings equal to 13 TJ. This, in turn, results in the decrease of CO2 emissions by tons and a total decrease of the eco-costs by approximately EUR 0.5 mln. Drawing technology also influences the losses of the zinc coating and CO2 emissions. Properly adjusted parameters of the wire drawing technology allow obtaining a zinc-coating that is 100% thicker, translating to 265 tons of zinc, whose production generates 900 tons of CO2 and incurs eco-costs equal to EUR 0.6 mln. Optimal parameters for drawing, from the perspective of decreased CO2 emissions during the zinc-coated steel wire manufacturing, are as follows: usage of the hydrodynamic drawing dies, angle of the die reducing zone α = 5°, and drawing speed of 15 m/s. [ABSTRACT FROM AUTHOR]

Avoiding heat stress in cows is an important condition for animal productivity and the maintaining of animal health. For this, it is necessary to provide an optimal microclimate in cowsheds using systems of air cooling. The paper analyzes one of these systems—an air humidification–cooling system. The research was carried out in a semi-insulated box-type cowshed containing 244 places. The changes in temperature, relative humidity, and temperature humidity index (THI) were studied for the air coming from outside and for the air inside the cowshed. Considering the fact that the cows were in the cowshed most of the time (51.5%) under heat stress, the use of a cooling system is appropriate. It was established that a cooling system is capable of compensating for heat released by animals. It was determined that with an increase in air temperature the relative efficiency of a cooling system increases. An intensive constant air exchange provided using fan operation avoids an excessive growth of relative humidity in a cowshed. To reduce the consumption of electricity and water, the paper suggests regulation of both the power of the fans of the system and the water supply to the nozzles not using temperature but using THI. Theoretically, when THI is used to regulate the operation of the cooling system, the consumption of electrical energy is reduced by 17.8%, and the consumption of water is reduced by 43.2% when compared to the option when the temperature is used to regulate the operation of a cooling system. [ABSTRACT FROM AUTHOR]

This paper investigates the relationship between geothermal energy consumption, economic growth, and foreign direct investments in countries where geothermal energy production is possible. Panel Fourier Granger causality and panel Fourier Toda–Yamamoto causality tests (2020–2021) were applied, which can take into account smooth transitional structural breaks with trigonometric functions using quarterly data for the period 2016 Q1–2020 Q3. Data were obtained from the International Energy Agency (IEA), Federal Reserve Economic Data (FRED), and the OECD official website. According to the results obtained based on panels, there is one-way causality from economic growth to geothermal energy and one-way causality from geothermal energy consumption to foreign direct investments. The results obtained based on individual countries indicate that one-way causality from foreign direct investment to geothermal energy consumption was found for Mexico and Portugal, and one-way causality from geothermal energy consumption to economic growth was found for Italy and Mexico. On the other hand, causality from economic growth to geothermal energy consumption was observed for Germany, Japan, and USA. No significant results were found for Turkey and New Zealand, and it is understood that the macroeconomic structures of these countries are not affected by geothermal energy. The difference in the results reveals that the application recommendations on this subject should also be different. [ABSTRACT FROM AUTHOR]

Unmediated charging of a battery using solar radiation is a very attractive project of solar energy conversion and storage. In the present work, solar energy was converted into electricity using a photocatalytic fuel cell operating with a chalcogenide-semiconductor-sensitized nanoparticulate titania photoanode and an air-cathode functioning by oxygen reduction. This cell produced sufficient energy to directly charge a vanadium redox battery functioning with a VOSO4 electrolyte and carbon paper electrodes. The whole system is characterized by ease of construction and simplicity of conception; therefore, it satisfies conditions for practical applications. [ABSTRACT FROM AUTHOR]

This paper presents the analytical and numerical application of a method to determine the parameters and power losses in the core of two medium-power synchronous generators. These generators are used as emergency power sources powered by diesel engines, gas engines, and gas turbines. They cover peak electricity demand but can also be used in traction drives. This article presents a new numerical method for determining losses in the generator core based on the use of a time-stepping solution using the FEM method and calculating these losses using analytical formulas. In calculating the losses for the FEM method, approximations of the loss characteristics of the sheet were used with a wide range of induction values and frequencies. This method is specific to the solution used and was adapted from the authors' previous work on losses in induction machines. A one-phase winding with alternating voltage was supplied to determine the basic parameters in the form of synchronous reactance. Also, an important novelty is the introduction of a new method of determining the saturation state of the magnetic circuit, which significantly affects the machine parameters. The obtained results were used in analytical calculations and implemented in a computer program that allows for the calculation of electromagnetic parameters, operating characteristics, and core losses, taking into account additional losses, total losses, and efficiency, as well as machine parameters in unsteady operating states and the current characteristics of a three-phase symmetrical short circuit at the machine terminals. The calculations obtained were verified experimentally by measurements of real machines. [ABSTRACT FROM AUTHOR]

Forecasting energy demand is critical to ensure the steady operation of the power system. However, present approaches to estimating power load are still unsatisfactory in terms of accuracy, precision, and efficiency. In this paper, we propose a novel method, named ELFNet, for estimating short-term electricity consumption, based on the deep convolutional neural network model with a double-attention mechanism. The Gramian Angular Field method is utilized to convert electrical load time series into 2D image data for input into the proposed model. The prediction accuracy is greatly improved through the use of a convolutional neural network to extract the intrinsic characteristics from the input data, along with channel attention and spatial attention modules, to enhance the crucial features and suppress the irrelevant ones. The present ELFNet method is compared to several classic deep learning networks across different prediction horizons using publicly available data on real power demands from the Belgian grid firm Elia. The results show that the suggested approach is competitive and effective for short-term power load forecasting. [ABSTRACT FROM AUTHOR]

This paper presents a methodology to forecast electrical demand for the Chilean Electrical Power System considering a national, regional, district and bus spatial disaggregation. The methodology developed was based on different kinds of econometric models and end-use models to represent the massification of low carbon emission technologies such as electromobility, electric heating, electric water heating, and distributed generation. In addition, the methodology developed allows for the projection of the electric demand considering different kinds of clients as regulated and non-regulated clients, and different economic sectors. The model was applied to forecast the long-term electricity demand in Chile for the period 2022–2042 for 207 districts and 474 buses. The results include projections under the base case and low carbon scenarios, highlighting the significant influence of new technologies on future demand. [ABSTRACT FROM AUTHOR]

With the development of the economy and society, the importance of a secure and stable electricity supply continues to increase. However, the power grid is facing the test of excess installed capacity, the waste of renewable energy, and a low comprehensive utilization rate. This problem stems from the inconsistent peak–valley differences between power production and consumption, and the lack of clear electricity price signals, which disrupts the safe and stable operation of the power market. This paper combines the interactive transactions among clean energy power generation companies, users, and energy storage, explores how the system optimization model can be reflected in the power market through regulatory measures, and formulates the optimal output scheme of the system under the constraints of clean energy power generation forecast data, user base load forecast data, demand-side resource regulation ability, and energy storage system regulation ability to achieve the goals of comprehensive clean energy power consumption and minimum cost for users. A comprehensive analysis of the proposed model was conducted using actual data from a certain province in China, the results show that the consumption of clean energy will increase by 3% to full consumption and the total cost of users will be 32% lower than that of time-of-use (TOU) power prices, which proves the potential of the proposed joint optimization model in absorbing clean energy and the effectiveness of the market mechanism. [ABSTRACT FROM AUTHOR]

In the context of power system decarbonization, the demand-side strategy for increasing the share of renewable energy is studied for two constrained energy systems. This strategy, which is currently widely suggested in policies on the energy transition, would impact consumer behavior. Despite the importance of studying the latter, the focus here is on decisions regarding the type, location, and timeframe of implementing the related measures. As such, solutions must be assessed in terms of cost and feasibility, technological learning, and by considering geographical and environmental constraints. Based on techno-economic optimization, in this paper we analyze the evolution of the power system and elaborate plausible long-term trajectories in the energy systems of two European islands. The case studies, Procida in Italy and Hinnøya in Norway, are both electrically connected to the mainland by submarine cables and present issues in their power systems, which are here understood as relatively isolated power systems. Renewable energy integration is encouraged by legislative measures in Italy. Although not modeled here, they serve as a backbone for the assumptions of increasing these investments. For Procida, rooftop photovoltaics (PV) coupled with energy storage are integrated in the residential, public, and tertiary sectors. A price-based strategy is also applied reflecting the Italian electricity tariff structure. At a certain price difference between peak and off-peak, the electricity supply mix changes, favoring storage technologies and hence decreasing imports by up to 10% during peak times in the year 2050. In Norway, renewable energy resources are abundant. The analysis for Hinnøya showcases possible cross-sectoral flexibilities through electrification, leading to decarbonization. By fine-tuning electric vehicle charging tactics and leveraging Norway's electricity pricing model, excess electricity demand peaks can be averted. The conclusions of this double-prospective study provide a comparative analysis that presents the lessons learnt and makes replicability recommendations for other territories. [ABSTRACT FROM AUTHOR]

This paper presents a novel approach for electricity consumption profiling in households through the fusion of usage data for individual smart devices. The novelty of the approach consists of leveraging the data representing the usage of individual appliances rather than using direct measurements of energy consumption. Our methodology focuses on merging signals representing the interaction of the user with the device to compute patterns in the total energy consumption per household. Subsequently, we apply data mining techniques—specifically, unsupervised clustering—to analyze the resulting time-series data representing daily energy consumption. Through this approach, we aim to identify and characterize patterns in energy usage within households, enabling insights for energy optimization strategies and resource allocation. This information can be further used in practical tasks, such as flattening energy consumption. The proposed approach offers an alternative to the direct measurement of energy usage, considering the potential for sensor failure or malfunction. This underscores the importance of implementing a complementary method for verifying and validating energy consumption data. [ABSTRACT FROM AUTHOR]

Australia, like many other countries around the world, is undergoing a transition toward net zero emissions. It requires changes and development in many sectors, which not only bring benefits but also challenges. The rapid growth in renewable energy sources (RESs) is necessary to decarbonise electricity generation but negatively affects grid stability. Residential buildings also contribute to this issue through specific load profiles and the high penetration of rooftop photovoltaic (PV) installations. Maintaining grid balance will be crucial for further emissions reductions. One of the potential solutions can be the replacement of conventional heating and cooling systems in houses with solutions capable of storing energy and shifting the electrical load. As presented in this paper, heat pumps and hydronic systems can significantly improve the electrical load of a typical South Australian household when they are controlled by algorithms reacting to the current grid conditions and household-generated electricity compared to conventional solutions. TRNSYS 18 simulations of air source and ground source heat pump systems with smart control based on measured electricity consumption and domestic hot water usage data showed the possibility of total energy consumption reduction, shifting the load from peak periods towards periods of excessive RES generation and increasing self-consumption of rooftop PV electricity. These improvements reduce the amount of emissions generated by such a household and allow for further development of other sectors. [ABSTRACT FROM AUTHOR]

This paper examines how Australian residential load profiles may evolve in the short to medium term future. These profiles can be used to support simulation studies of the future Australian network within an environment that is transitioning to renewable energy and broader use of electricity as a tool for decarbonisation. The daily profiles rely heavily on the Australian Energy Market Operator (AEMO) forecasts for future annual energy usage. The period from 2024 to 2050 will be transformational. In the residential networks, two secular trends are particularly important in expanding residential generation and electrification. New daily load profiles have been constructed using historical Australian profiles and adding additional components for solar generation, battery operation and electrification activities. The entire aggregated residential network is expected to have reverse midday power flow on any average day from 2024 onwards due to the rapid increase in electric vehicle (EV) usage. The domestic energy demand forecasting methodology presented in this work related to Australia can easily be adopted to carry out similar forecasting for any country of the world. [ABSTRACT FROM AUTHOR]

Sierra Leone is an electricity-poor country with one of the lowest electricity consumption per capita rates across sub-Saharan Africa. Yet, with ambitious targets to transform and stimulate its economy in the coming decades, energy demand forecasting becomes an integral component of successful energy planning. Through applying the MAED-D (version 2.0.0) demand software, this research study aims to generate Sierra Leone's electricity demand forecasts from 2023 to 2050. Three novel scenarios (baseline-, high-, and low-demand) are developed based on socio-economic and technical parameters. The baseline scenario considers the current electricity sector as business-as-usual; the high-demand scenario examines an ambitious development future with increased economic diversification and mechanisation, and the low-demand scenario examines more reserved future development. The modelled scenario results project an increase in electricity demand ranging from 7.32 PJ and 12.23 PJ to 5.53 PJ for the baseline-, high-, and low-demand scenarios, respectively, by 2050. This paper provides a base set of best-available data needed to produce an electricity demand model for Sierra Leone which can be used as a capacity-building tool for in-country energy planning alongside further integration into data modelling pipelines. [ABSTRACT FROM AUTHOR]

Federated learning (FL) is a machine-learning framework that effectively addresses privacy concerns. It harnesses fragmented data from devices across the globe for model training and optimization while strictly adhering to user privacy protection and regulatory compliance. This framework holds immense potential for widespread applications in the smart-grid domain. Through FL, power companies can collaborate to train smart-grid models without revealing users' electricity consumption data, thus safeguarding their privacy. However, the data collected by clients often exhibits heterogeneity, which can lead to biases towards certain data features during the model-training process, therefore affecting the fairness and performance of the model. To tackle the fairness challenges that emerge during the federated-learning process in smart grids, this paper introduces FedCSGP, a novel federated-learning approach that incorporates client sampling and gradient projection. The main idea of FedCSGP is to categorize the causes of unfairness in federated learning into two parts: internal conflicts and external conflicts. Among them, the client-sampling strategy is used to resolve external conflicts, while the gradient-projection strategy is employed to address internal conflicts. By tackling both aspects, FederCSGP aims to enhance the fairness of the federated-learning model while ensuring the accuracy of the global model. The experimental results demonstrate that the proposed method significantly improves the accuracy of poorly performing clients in smart-grid scenarios with lower communication costs, therefore enhancing the fairness of the federated-learning algorithm. [ABSTRACT FROM AUTHOR]

The significant growth in demand for electricity has led to increasing congestion on distribution networks. The challenge is twofold: it is needed to expand and modernize our grid to meet this increased demand but also to implement smart grid technologies to improve the efficiency and reliability of electricity distribution. In order to mitigate these congestions, novel approaches by using flexibility sources such as battery energy storage can be used. This involves the use of battery storage systems to absorb excess energy at times of low demand and release it at peak times, effectively balancing the load and reducing the stress on the grid. In this paper, two optimal power flow formulations are discussed: the branch flow model (non-convex) and the relaxed bus injection model (convex). These formulations determine the optimal operation of the flexibility sources, i.e., battery energy storage, with the objective of minimizing power losses while avoiding congestions. Furthermore, a comparison of the performance of these two formulations is performed, analyzing the objective function results and the flexibility operation. For this purpose, a real Spanish distribution network with its corresponding load data for seven days has been used. [ABSTRACT FROM AUTHOR]

Demand response (DR) can provide extra scheduling flexibility for power systems. Different from industrial and residential loads, the production process of manufacturing loads includes multiple production links, and complex material flow and energy flow are closely coupled, which can be seen as a typical nondeterministic polynomial-time (NP) hard problem. In addition, there is a coupling effect between the temperature-controlled loads (TCLs) and the manufacturing loads, which has often been ignored in previous research, resulting in conservative electricity consumption planning. This paper proposes an optimal demand management for the manufacturing industry. Firstly, the power consumption characteristics of manufacturing loads are analyzed in detail. A state task network (STN) is introduced to decouple the relationship between energy and material flow in each production link. Combining STN and production equipment parameters, a general MILP model is constructed to describe the whole production process of the manufacturing industry. Then, a mathematical model of the TCLs considering a comfortable human degree is established. Fully considering the electricity consumption behavior of equipment and TCLs, the model predictive control (MPC) method is adopted to generate the optimal scheduling plan. Finally, an actual seat production enterprise is used to verify the feasibility and effectiveness of the proposed demand management strategy. [ABSTRACT FROM AUTHOR]

With the energy structure transition and the development of the green power market, the role of electricity retailers in multi-market green power trading has become more and more important. Particularly in China, where aggressive green energy policies and rapid market transformations provide a distinct context for such studies, the challenges are pronounced. Under demand-side response, electricity retailers face the uncertainty of users' electricity consumption and incentives, which complicates decision-making processes. The purpose of this paper is to explore the optimization decision-making problem of multi-market green power trading for electricity retailers under demand-side response, with a special focus on the Chinese market due to its leadership in implementing substantial green energy initiatives and its potential to set precedents for global practices. We first construct a two-party benefit optimization model, which comprehensively considers the profit objectives for electricity retailers and utility maximization for users. Then, the model is solved by the Lagrange multiplier method and distributed subgradient algorithm to obtain the optimal solution. Finally, the effectiveness of the incentive optimization strategy under the multi-market to promote green power consumption and improve the profit of electricity retailers is verified by arithmetic simulation. The results of this study show that the incentive optimization strategy under multi-market, particularly within the Chinese context, is expected to provide a reference for electricity retailers to develop more flexible and effective trading strategies in the green power market and to contribute to the process of promoting green power consumption globally. [ABSTRACT FROM AUTHOR]

Behind the meter (BTM) distributed energy resources (DERs), such as photovoltaic (PV) systems, battery energy storage systems (BESSs), and electric vehicle (EV) charging infrastructures, have experienced significant growth in residential locations. Accurate load forecasting is crucial for the efficient operation and management of these resources. This paper presents a comprehensive survey of the state-of-the-art technologies and models employed in the load forecasting process of BTM DERs in recent years. The review covers a wide range of models, from traditional approaches to machine learning (ML) algorithms, discussing their applicability. A rigorous validation process is essential to ensure the model's precision and reliability. Cross-validation techniques can be utilized to reduce overfitting risks, while using multiple evaluation metrics offers a comprehensive assessment of the model's predictive capabilities. Comparing the model's predictions with real-world data helps identify areas for improvement and further refinement. Additionally, the U.S. Energy Information Administration (EIA) has recently announced its plan to collect electricity consumption data from identified U.S.-based crypto mining companies, which can exhibit abnormal energy consumption patterns due to rapid fluctuations. Hence, some real-world case studies have been presented that focus on irregular energy consumption patterns in residential buildings equipped with BTM DERs. These abnormal activities underscore the importance of implementing robust anomaly detection techniques to identify and address such deviations from typical energy usage profiles. Thus, our proposed framework, presented in residential buildings equipped with BTM DERs, considering smart meters (SMs). Finally, a thorough exploration of potential challenges and emerging models based on artificial intelligence (AI) and large language models (LLMs) is suggested as a promising approach. [ABSTRACT FROM AUTHOR]

Accurate electricity demand forecasting serves as a vital planning tool, enhancing the reliability of management decisions. Apart from that, achieving these aims, particularly in managing peak demand, faces challenges due to the industry's volatility and the ongoing increase in residential energy use. Our research suggests that employing deep learning algorithms, such as recurrent neural networks (RNN), long short-term memory (LSTM), and gated recurrent units (GRU), holds promise for the accurate forecasting of electrical energy demand in time series data. This paper presents the construction and testing of three deep learning models across three separate scenarios. Scenario 1 involves utilizing data from all-day demand. In Scenario 2, only weekday data are considered. Scenario 3 uses data from non-working days (Saturdays, Sundays, and holidays). The models underwent training and testing across a wide range of alternative hyperparameters to determine the optimal configuration. The proposed model's validation involved utilizing a dataset comprising half-hourly electrical energy demand data spanning seven years from the Electricity Generating Authority of Thailand (EGAT). In terms of model performance, we determined that the RNN-GRU model performed better when the dataset was substantial, especially in scenarios 1 and 2. On the other hand, the RNN-LSTM model is excellent in Scenario 3. Specifically, the RNN-GRU model achieved an MAE (mean absolute error) of 214.79 MW and an MAPE (mean absolute percentage error) of 2.08% for Scenario 1, and an MAE of 181.63 MW and MAPE of 1.89% for Scenario 2. Conversely, the RNN-LSTM model obtained an MAE of 226.76 MW and an MAPE of 2.13% for Scenario 3. Furthermore, given the expanded dataset in Scenario 3, we can anticipate even higher precision in the results. [ABSTRACT FROM AUTHOR]

Demand response management (DRM) plays a crucial role in the prospective development of smart grids. The precise estimation of electricity demand for individual houses is vital for optimizing the operation and planning of the power system. Accurate forecasting of the required components holds significance as it can substantially impact the final cost, mitigate risks, and support informed decision-making. In this paper, a forecasting approach employing neural networks for smart grid demand-side management is proposed. The study explores various enhanced artificial neural network (ANN) architectures for forecasting smart grid consumption. The performance of the ANN approach in predicting energy demands is evaluated through a comparison with three statistical models: a time series model, an auto-regressive model, and a hybrid model. Experimental results demonstrate the ability of the proposed neural network framework to deliver accurate and reliable energy demand forecasts. [ABSTRACT FROM AUTHOR]