Search

In this study, a new structure is proposed based on the body-centered cubic (BCC) lattice structure by adding a cubic truss in the center of the BCC structure and denoting it TLC (truss–lattice–cube). The different dimensions of the central cube can notably affect the mechanical properties of the lattice structure. With a fixed length (15 mm) of a unit cell, the optimal size for the central cube is determined to be 5 mm. Quasi-static compressive tests are performed on specimens made of polylactic acid (PLA) using additive manufacturing technology. The deformation characteristics of the new structure are analyzed in detail by experiments and numerical simulations. Compared to the BCC structure, the mechanical properties of the TLC structure were significantly improved. The initial flow stress of the TLC increased by 122% at a strain of 0.1; the specific strength enhanced by 293% at a strain of 0.5; and the specific energy absorption improved by 312% at a strain of 0.6. Printing defects in the lattice structure may remarkably damage its mechanical properties. In this work, incorporation of microcracks into the finite element model allows the simulation to capture the influence of printing defects and significantly improve the predictive accuracy of the simulation. [ABSTRACT FROM AUTHOR]

The second-phase particles in magnesium alloys could affect the mechanical properties of the material significantly. In this work, 3D finite element models with explicit incorporation of second-phase particles are established. The simulations are calibrated with the experimental results of the Mg-1Gd alloy. The influences of factors, such as the particle distribution, size, and orientation of cylindrical particles, on precipitation hardening are investigated in detail. Three interface conditions between particles and the matrix—perfect bonding and high- and low-strength bonding—are studied at the same time. The interface conditions are shown to exert a stronger influence on precipitation hardening compared to the factors of particle distribution and size. In contrast, the influence of the orientation of cylindrical particles at grain boundaries outweighs the effect of interface property. When second-phase particles are relatively large and all located at grain boundaries, the hardening effect can be improved, and the magnesium alloy shows relatively high flow stress. However, the high hardening effect from the second-phase particles could result in high local stress concentration and possible early failure or low ductility of Mg alloys. [ABSTRACT FROM AUTHOR]

The effects of fly ash, sodium carbonate content, foaming temperature and foaming time on foam glass aperture sizes and their distribution were analyzed by the orthogonal experimental design. Results from the steady-state method showed a normal distribution of the number of apertures with change in average aperture, which ranges from 0.1 to 2.0 mm for more than 93% of apertures. For a given porosity, the thermal conductivity decreases with the increase of the aperture size. The apertures in the sample have obvious effects in blocking the heat flow transmission: heat flow is quickly diverted to both sides when encountered with the aperture. When the thickness of the sample is constant, the thermal resistance of the foam glass sample increases with increasing porosity, leading to better thermal insulation. Furthermore, our results suggest that the more evenly distributed and orderly arranged the apertures are in the foam glass material, the larger the thermal resistance of the material and hence, the better the thermal insulation. [ABSTRACT FROM AUTHOR]