Search

This paper presents a new grid-forming strategy for hybrid AC/DC microgrids using bidirectional virtual inertia support designed to address weak grid conditions. The stability of hybrid AC/DC microgrids heavily relies on the AC mains frequency and the DC-link voltage, and deviations in these factors can lead to undesirable outcomes such as load curtailments and power system congestions and blackouts. This paper introduces a unique approach that leverages bidirectional virtual inertia support to enhance the stability and reliability of hybrid AC/DC microgrids under weak grid conditions. The proposed strategy employs virtual inertia as a buffer to mitigate rapid changes in DC-link voltage and AC frequency, thereby enhancing system stability margins. This strategy significantly contributes to a more stable and reliable grid operation by reducing voltage and frequency fluctuations. A standard hybrid AC/DC microgrid configuration is used to implement the bidirectional virtual inertia support, where a bidirectional interlinking converter control is adjusted to deliver inertia support to both the AC and DC subgrids. This converter utilizes the DC grid voltage and AC grid frequency as inputs, effectively managing active power balance and implementing auxiliary functions. Extensive simulations are conducted under weak grid conditions and standalone mode to validate the effectiveness of the proposed strategy. The simulation results demonstrate a remarkable improvement in frequency nadir, rate-of-change-of-frequency (RoCoF), and DC bus voltage deviation in the hybrid AC/DC microgrids. The bidirectional virtual inertia support substantially reduces voltage and frequency fluctuations, enhancing the microgrid stability and resilience. There is an improvement of over 45% and 25% in the frequency deviation and voltage deviation, respectively, achieved through implementing the proposed control strategy. [ABSTRACT FROM AUTHOR]

The superior access to renewable sources in modern power systems increases the fluctuations in system voltage and power. Additionally, the central dilemmas in using renewable energy sources (RESs) are the intermittent nature of and dependence on wind speed and solar irradiance for wind and photovoltaic (PV) systems, respectively. Therefore, utilizing a vigorous and effective energy storage system (ESS) with RESs is crucial to overcoming such challenges and dilemmas. This paper describes the impacts of using a battery storage system (BSS) and superconducting magnetic energy storage (SMES) system on a DC bus microgrid-integrated hybrid solar–wind system. The proposed method employs a combination of BSS and SMES to improve the microgrid stability during different events, such as wind variation, shadow, wind turbine (WT) connection, and sudden PV outage events. Distinct control approaches are proposed to control the system's different components in order to increase overall system stability and power exchange. Both the PV and wind systems are further equipped with unique maximum power point tracking (MPPT) controllers. Additionally, each of the ESSs is controlled using a proposed control method to supervise the interchange of the active power within the system and to keep the DC bus voltage constant during the different examined instabilities. Furthermore, to maintain the load voltage /frequency constant, the prime inverter is controlled using the proposed inverter control unit. The simulation results performed with Matlab/Simulink show that the hybrid BSS + SMES system successfully achieves the main targets, i.e., DC voltage, interchange power, and load voltage/frequency are improved and smoothed out. Moreover, a comparison among three case studies is presented, namely without using ESSs, using the BSS only, and once more using both BSS and SMES systems. The findings prove the efficacy of the proposed control method based on the hybrid BSS + SMES approach over BSS only in preserving the modern power system's stability and reliability during the variable events. [ABSTRACT FROM AUTHOR]