Search

In this study, calibrated hot box and finite element simulation methods were used to study the influence of a slotted web on the thermal performance of a lightweight steel stud composite wall. By comparing the results from the simulations and experiments, the accuracy of the finite element method was verified; this method was then used for parameter analyses. The results showed that the wall's thermal transfer coefficient is inversely proportional to increases in the length of the slot and height of the stud web, leading to improvements in the thermal insulation effect; vice versa, the wall thermal transfer coefficient increases when the slot transverse spacing and stud thickness increase, and the insulation effect correspondingly worsens. The stud spacing influences the insulation performance of the wall by changing the proportion of studs within a certain wall. The greater the proportion of studs, the greater the stud thermal bridging, the faster the thermal loss, and the worse the insulation effect of the wall. In practice, the height of the stud web can be set as required. Preferably, for practical applications, the number of rows of slots is 5–7, the length of the slots is 70–80 mm, the transverse distance of the slots is 6–8 mm, the thickness of each stud is 1 or 1.2 mm, and the distance of each stud is 600 mm. [ABSTRACT FROM AUTHOR]

Hovenia acerba is a precious medicinal and edible tree. We assessed the genetic variation of H. acerba quality traits and conducted a comprehensive germplasm resource evaluation to provide a theoretical basis for breeding edible, medicinal, and edible/medicine combination varieties. We evaluated 31 H. acerba germplasm resources, including 12 infructescence and 8 fruit quality traits using correlation, principal component, and cluster analyses. The results showed that there were significant differences in all quality traits, with an average coefficient of variation greater than 0.20, an average genetic diversity greater than 1.80, and an average repeatability greater than 0.90. The average genetic variation and repeatability of quality traits in infructescence were higher than fruit. Infructescence K, Ca, Mn, Mg, and reducing sugar contents are important indicators in evaluating infructescence and fruit quality traits, and infructescence K, Mg, and reducing sugar contents are also quality innovation indices of H. acerba germplasms. Tannin, protein, and soluble sugar were the most suitable quality components for screening, followed by reducing sugar, starch, fat, total saponins, and total flavones. According to principal component factor scores and cluster analysis results, specific genotypes were selected as breeding materials for infructescence protein, tannin, flavone, reductive sugar, fruit tannin, fat, flavonoid, saponin, protein, and starch. The correlation analysis with environmental factors showed that the total amount of applied water could influence H. acerba infructescence and fruit quality. In conclusion, the variability of H. acerba germplasm resources was rich, and selection potential is large, which is beneficial to germplasm quality innovation and breeding. [ABSTRACT FROM AUTHOR]

Osteoarthritis (OA) is a type of arthritis that causes joint pain and limited mobility. In recent years, some studies have shown that the pathological process of OA chondrocytes is related to ferroptosis. Our study aims to identify and validate differentially expressed ferroptosis-related genes (DEFRGs) in OA chondrocytes and to investigate the potential molecular mechanisms. RNA-sequencing and microarray datasets were downloaded from Gene Expression Omnibus (GEO) data repository. Differentially expressed genes (DEGs) were screened by four methods: limma-voom, edgeR, DESeq2, and Wilcoxon rank-sum test. Weighted correlation network analysis (WGCNA), protein-protein interactions (PPI), and cytoHubba of Cytoscape were applied to identify hub genes. Clinical OA cartilage specimens were collected for quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis, western blotting (WB), histological staining, transmission electron microscopy (TEM), and transfection. Sankey diagram was used to visualize the relationships between the expression level of SLC3A2 in the damaged area and clinical factors. Based on bioinformatics analysis, clinical factors, and experiment validation, SLC3A2 was identified as a hub gene. It was down-regulated in OA cartilage compared to normal cartilage (p < 0.05). Functional enrichment analysis revealed that SLC3A2 was associated with ferroptosis-related functions. Spearman correlation analysis showed that the expression level of SLC3A2 in the OA cartilage-damaged area was closely related to BMI, obesity grade, and Kellgren-Lawrence grade. Furthermore, in vitro experiments validated that SLC3A2 inhibited ferroptosis and suppressed cartilage degeneration in OA. In summary, we demonstrated that SLC3A2 inhibited ferroptosis and suppressed cartilage degeneration in OA. These findings provide a new idea for the study of the pathogenesis of OA, thus providing new means for the clinical diagnosis and targeted therapy of OA. [ABSTRACT FROM AUTHOR]

The role of low-resistivity substrate on vertical leakage current (VLC) of AlGaN/GaN-on-Si epitaxial layers has been investigated. AlGaN/GaN high-electron-mobility transistors (HEMTs) grown on both p-type and n-type Si substrates with low resistivity are applied to analyze the vertical leakage mechanisms. The activation energy (Ea) for p-type case is higher than that for n-type at 0–600 V obtained by temperature-dependent current-voltage measurements. An additional depletion region in the region of 0–400 V forms at the AlN/p-Si interface but not for AlN/n-Si. That depletion region leads to a decrease of electron injection and hence effectively reduces the VLC. While in the region of 400–600 V, the electron injection from p-Si substrate increases quickly compared to n-Si substrate, due to the occurrence of impact ionization in the p-Si substrate depletion region. The comparative results indicate that the doping type of low-resistivity substrate plays a key role for VLC. [ABSTRACT FROM AUTHOR]

We will introduce four new geometric constants closely related to the James constant J (X) , which have symmetric structure, along with a discussion on the relationships among them and some other well-known geometric constants via several inequalities, together with the calculation of several values on some specific spaces. In addition, we will characterize geometric properties of J 1 (X) , such as uniform non-squareness and uniformly normal structure. [ABSTRACT FROM AUTHOR]

We will introduce some new geometric constants based on the constant H (X) proposed by Gao and the constant A 2 (X) proposed by M. Baronti et al. We first provide a study of a new constant M 1 (X) closely related to the midlines of equilateral triangles, including a discussion of some of its properties and the connections with other parameters of the sphere. Next, we focus on a new constant M 2 (X) and its generalized form M 2 (X , p , q) , along with some of their basic properties. Finally, we concentrate on a new constant M 3 (X) and discuss some of its properties. [ABSTRACT FROM AUTHOR]

The mechanical properties of composites are highly dependent on the interfacial interaction. In the present work, inspired by marine mussel, the adhesion between energetic crystals of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) and polymer binders was improved. Three types of linear polymeric agents of glycidyl azide polymer (GAP), polyethylene glycol (PEG), and polytetramethylene ether glycol (PTMEG) were grafted onto TATB particles bridged through polydopamine (PDA) films. SEM images showed that 5% grafting contents could evidently form roughness shells on the surface. With a reinforcement at the interface produced by grafting shells, the mechanical properties of polymer-bonded explosives (PBXs) exhibited outstanding mechanical performance, especially for the PTMEG-grafting sample. Examined by the contact-angle test, the PTMEG-grafting sample possessed a value of polar component similar to that of fluoropolymer, leading to an excellent wettability of the two phases. Additionally, different contents of PTMEG were grafted to reveal that the mechanical properties could be improved even with content as little as 0.5 wt.% PTMEG. These results might highlight a correlation between interfacial interaction and macroscopic properties for mechanically energetic composites, while providing a versatile route of grafting on highly loaded composites. [ABSTRACT FROM AUTHOR]

Alfalfa (Medicago sativa) is the most widely grown and most important forage crop in the world. However, alfalfa is susceptible to waterlogging stress, which is the major constraint for its cultivation area and crop production. So far, the molecular mechanism of alfalfa response to the waterlogging is largely unknown. Here, comparative transcriptome combined with proteomic analyses of two cultivars (M12, tolerant; M25, sensitive) of alfalfa showing contrasting tolerance to waterlogging were performed to understand the mechanism of alfalfa in response to waterlogging stress. Totally, 748 (581 up- and 167 down-regulated) genes were differentially expressed in leaves of waterlogging-stressed alfalfa compared with the control (M12_W vs. M12_CK), whereas 1193 (740 up- and 453 down-regulated) differentially abundant transcripts (DATs) were detected in the leaves of waterlogging-stressed plants in comparison with the control plants (M25_W vs. M25_CK). Furthermore, a total of 187 (122 up- and 65 down-regulated) and 190 (105 up- and 85 down-regulated) differentially abundant proteins (DAPs) were identified via isobaric tags for relative and absolute quantification (iTRAQ) method in M12_W vs. M12_CK and M25_W vs. M25_CK comparison, respectively. Compared dataset analysis of proteomics and transcriptomics revealed that 27 and eight genes displayed jointly up-regulated or down-regulated expression profiles at both mRNA and protein levels in M12_W vs. M12_CK comparison, whereas 30 and 27 genes were found to be co-up-regulated or co-down-regulated in M25_W vs. M25_CK comparison, respectively. The strongly enriched Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways for co-up-regulated genes at mRNA and protein levels in M12_W vs. M12_CK comparison were 'Amino sugar and nucleotide sugar metabolism', 'Arginine and proline metabolism' and 'Starch and sucrose metabolism', whereas co-up-regulated protein-related pathways including 'Arginine and proline metabolism' and 'Valine, leucine and isoleucine degradation' were largely enriched in M25_W vs. M25_CK comparison. Importantly, the identified genes related to beta-amylase, Ethylene response Factor (ERF), Calcineurin B-like (CBL) interacting protein kinases (CIPKs), Glutathione peroxidase (GPX), and Glutathione-S-transferase (GST) may play key roles in conferring alfalfa tolerance to waterlogging stress. The present study may contribute to our understanding the molecular mechanism underlying the responses of alfalfa to waterlogging stress, and also provide important clues for further study and in-depth characterization of waterlogging-resistance breeding candidate genes in alfalfa. [ABSTRACT FROM AUTHOR]

The solid–solid phase transition, poor mechanical properties, and high sensitivity has impeded further practical applications of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) based polymer bonded explosives (PBXs). To address these issues together, a facile and effective route was employed to achieve a coating of polydopamine (PDA) on the surface of explosive crystals via in situ polymerization of dopamine. Additionally, PBXs based on HMX@PDA microcapsules were prepared with a fluoropolymer as polymer binder. Improved storage modulus, static mechanical strength and toughness, and creep resistance has been achieved in as-prepared PDA modified PBXs. The β-δ phase transition temperature of as-obtained PBXs based on conventional HMX (C-HMX)@PDA was improved by 16.3 °C. The friction sensitivity of the C-HMX based PBXs showed a dramatic drop after the PDA coating. A favorable balance proposed in this paper among thermal stability, mechanical properties, and sensitivity was achieved for C-HMX based PBXs with the incorporation of PDA. [ABSTRACT FROM AUTHOR]

The problem of weak magnetism has hindered the application of magnetic semiconductors since their invention, and on the other hand, the magnetic mechanism of GaN-based magnetic semiconductors has been the focus of long-standing debate. In this work, nanoscale GaN:Mn wires were grown on the top of GaN ridges by metalorganic chemical vapor deposition (MOCVD), and the superconducting quantum interference device (SQUID) magnetometer shows that its ferromagnetism is greatly enhanced. Secondary ion mass spectrometry (SIMS) and energy dispersive spectroscopy (EDS) reveal an obvious increase of Mn composition in the nanowire part, and transmission electron microscopy (TEM) and EDS mapping results further indicate the correlation between the abundant stacking faults (SFs) and high Mn doping. When further combined with the micro-Raman results, the magnetism in GaN:Mn might be related not only to Mn concentration, but also to some kinds of built-in defects introduced together with the Mn doping or the SFs., Competing Interests: The authors declare no conflict of interest.