Search

Opencast coal mining produces trash of soil and rock containing various minerals, that are usually dumped nearby the abandoned sites which causes severe environmental concern including the production of acid mine drainage (AMD) through oxidation pyrite minerals. The current study entailed assessing the potential production of AMD from an opencast coal mining region in Northeast part of India. In order to have a comprehensive overview of the AMD problem in Makum coalfield, the physico-chemical, geochemical, and petrological characteristics of the coal and overburden (OB) samples collected from the Makum coalfield (Northeast India) were thoroughly investigated. The maceral compositions reveal that coal features all three groups of macerals (liptinite, vitrinite, and inertinite), with a high concentration of liptinite indicating the coal of perhydrous, thereby rendering it more reactive. Pyrite (FeS2) oxidation kinetics were studied by conducting the aqueous leaching experiments of coal and (OB) samples to interpret the chemical weathering under controlled laboratory conditions of various temperature and time periods, and to replicate the actual mine site leaching. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) was operated to detect the disposal of some precarious elements from coal and OB samples to the leachates during our controlled leaching experiment. The Rare earth element (REE) enrichment in the samples shows the anthropogenic incorporation of the REE in the coal and OB. These experiments reveal the change in conductivity, acid producing tendency, total dissolved solid(TDS), total Iron(Fe) and dissolved Sulfate(SO42−) ions on progress of the leaching experiments. Moreover, the discharge of FeS2 via atmospheric oxidation in laboratory condition undergoes a significant growth with the rise of temperature of the reaction systems in the environment and follows pseudo first order kinetics. A bio-remediative strategies is also reported in this paper to mitigate AMD water by employing size-segregated powdered limestone and water hyacinth plant in an indigenously developed site-specific prototype station. Apart from neutralisation of AMD water, this eco-friendly AMD remediation strategy demonstrates a reduction in PHEs concentrations in the treated AMD water. [ABSTRACT FROM AUTHOR]

Coal is the major source of power in India and world over. Coal mining is an essential industry which has a major role in the economic development of the country. Most major mining activities contribute directly or indirectly to air pollution. Coal dust is a major air pollutant which affects the personal working in the mines and also people residing in villages near the mines. Air pollution due to coal particulates can affect human health and cause damages to the environment. Hence effective pollution control mechanisms are needed to keep the pollution levels within permissible levels. The easiest and most common method employed for dust suppression worldwide is sprinkling of water. In majority of mines, water sprinklers are operated manually and can lead to wastage of water due to over sprinkling. It can also prove to be ineffective in dust suppression if sprinkling is not done properly. The paper proposes a system which can be deployed to automate the dust suppressions sprinklers. The system will monitor the concentration of PM10 and PM2.5 in the air and initiate sprinkling operation when the particulate matter content exceeds preconfigured limits. [ABSTRACT FROM AUTHOR]

Background: The concentration of silica in occupational conditions is well defined and estimated around the world. Many countries in the world have developed air standards for occupational conditions based on the percent silica in ambient air. This is due to the pulmonary effect caused by silica yielding diseases like silicosis and pneumoconiosis. In India, occupational exposure to silica dust is regulated by Directorate General of Mine Safety (Tech.) (S&T) Circular No. 1 of 2004 Under Reg. 123 of Coal Mines Regulations, 1957 for any metal/non-metal mining operations estimated gravimetrically. As no silica standards are prescribed in India for non-occupational conditions, venturing into such analysis was well envisaged and perceived. Methodology: Air sampling was done at identified locations through high-volume samplers for 24 h, twice a week in pre-monsoon season (March to June) and the Whatman filter paper was sonicated at sufficient speed to isolate dust particles for energy dispersive X-ray. Results: The percentage of silica in "PM10" was found lowest in mining sites (15%), and highest in transportation sites (35%) and mid-value for mixed sites (24%). Thus, risk level gets magnified due to addition of finer dust generated in transportation and mixed sites than mining due to diesel driven vehicles. Burning of any fossil fuel generates high percentage of finer dust (< 2.5 µm). Conclusions: There should be proper prescribed standard for silica for non-occupational conditions. [ABSTRACT FROM AUTHOR]

The increasing trend of opencast coal mining in India tends to release huge amounts of dust. But there is no well-defined method of estimating dust emission due to different coal mining activities. This paper examines the sources of dust emission due to coal mining activities, and focuses on the quantification of dust emission with the development and use of emission factors. Because of their site-specific nature, emission factors developed for one site may not give the correct results for another site. In the present investigation, prediction equations are utilized for the development of emission factors. For the applications of this concept, one large opencast coal project of Bharat Coking Coal Ltd. (BCCL) was investigated, and the total amount of dust emitted due to different mining activities was calculated by the utilization of emission factor data, which was estimated to be 9368.2 kg/day. This paper also focuses on the significance of this study in the field of environmental protection and likely impacts of such study. The paper concludes that once the amount of dust generation is estimated, the impact on air quality can be assessed appropriately and a proper air-pollution control strategy can be developed. [ABSTRACT FROM AUTHOR]

Dust from haul and transport roads are the major source of air pollution in opencast coal mining areas. Dust generated during mining operations pollutes air which causes different health problems. Various available techniques are implemented in the field to minimize and control dust in mining areas. However, they are not very effective because dust deposited on road surfaces are not removed by these techniques. For effective control of dust in opencast mining areas, it has to be regularly collected from road surfaces and may be converted into solid form, and subsequently can be used as a domestic fuel considering its physicochemical properties. The present paper describes a comparative study of qualitative and quantitative aspects of road dust samples of four coalfields of India. The pH of the dust was found to be in the range of 5.1-7.7. Moisture, ash, volatile matter, fixed carbon, water-holding capacity, bulk density, and specific gravity of dust samples were found to be in the range of 0.5-3.0%, 45-76%, 12.6-20.0%, 10.2-45.3%, 21.17-31.71%, 1.15-1.70, and 1.73-2.30 g cm, respectively. Observing the overall generation and characteristics of coal dust, it is suggested that coal dust from haul and transport roads of mining areas can be effectively collected and used as domestic fuel. [ABSTRACT FROM AUTHOR]

Maslow's hierarchy-of-needs theory has been used to predict development of Quality of Life (QOL) in countries over time. In this paper an attempt has been taken to derive a methodological validation of quality of life questionnaire which have been prepared for the study area. The objective of the study is to standardize a questionnaire tool to assess the QoL of residents in a problem area in India. From a pre tested 16 parameter questionnaire tool factorial validity were established to extract three domains and were mapped in accordance to Abraham Maslow's Hierarchy of Needs theory. Out of these 16 parameters 13 were found relevant. Then a new tool was conceptualized with 13 pre selected parameters and other parameters were pooled from existing tool and reviews to form a 36 parameter tool. Factor analysis was done to extract the domains. Reliability of the tool was also tested to find the relation between the domains of QoL. Then the quality of life of the study area was interpreted to find the distribution of respondents among the categories of QoL. 70% of respondents reported to have average quality of life. The tool was found to be highly reliable and valid. [ABSTRACT FROM AUTHOR]

Abstract  Shallow land cover over old underground workings at Kamptee Colliery has led to the development of ground collapse, with three crown hole subsidences recorded in a 10 year period. As the land above the workings has been developed, it was considered that for safety purposes areas with less than 15 m of competent rock should be established. The paper discusses the Multi-electrode Resistivity Imaging (RI) and Ground Penetrating Radar (GPR) undertaken over an area of 800 m � 200 m, which indicated that where a competent cover was present it was very thin. [ABSTRACT FROM AUTHOR]

This study gives insight into the spatiotemporal variability of respirable PM concentrations around typically highly mechanized opencast coal mines in India and its influence on ambient air quality, which at present is scant in the literature. The results suggest that at a distance of 500 m from the pit boundary, the respirable PM concentrations were found higher than the background concentration (1.52, 1.80 and 1.89 times for PM10, PM2.5 and PM1 at Mine 1 and 1.4, 1.35 and 1.35 times for PM10, PM2.5 and PM1 at Mine 2) which suggests that residents up to and beyond 500 m from the mine are exposed to the PM emitted from mining activities. For PM2.5 and PM1 concentrations, RH was the most important determinant (PM2.5: 24.8%; PM1: 30.1%). Pit boundary PM concentration was the weakest determinant (7%) for the PM2.5 concentration in mine surroundings, and wind speed was found as the weakest determinant (6.6%) for PM1 concentration. Conversely, distance (20.8%) was the important determinant of PM10 concentrations. All the four predictors (RH, wind speed, distance and Pit boundary PM concentration) could explain 46–54% variability in the PM concentrations. Inclusion of pit boundary PM concentration as a predictor increased the prediction capability of the models (all the developed models have R2 > 0.40 at significance level p < 0.05). PM prediction models can be used by the mining and regulatory authorities to assess the respirable PM level in mine surroundings. [ABSTRACT FROM AUTHOR]

Methane content in a coal seam is a necessary parameter for evaluating coal bed gas, and it poses an environmental risk to underground coal mining activities. Keeping in pace with comprehensive studies of coal bed gas, 12 coal samples were selected from the Sitarampur block of Raniganj Coalfield for analysis. The Petrographic examination illustrated that significant values of reactive macerals present in samples demonstrate that organic matter is dominated by the prominent source of aromatic hydrocarbons with a minor proportion of aliphatic hydrocarbon, which falls in the region of (Type III) kerogen, confirms the suitability for the potential of hydrocarbon generation. "A" factor (aliphatic/aromatic bands) and "C" factor (carbonyl/carboxyl bands) value concluded that the sample has the lowest aromaticity and the highest hydrocarbon-generating potential, which was also validated by the Van Krevelen diagram. The Van Krevelen diagram plots between the H/C and O/C ratio indicate that coal samples lie in the type III kerogen, and bituminous coal (gas prone zone) is present in the block, which is confirmed by the cross-plot between desorbed and total gas (cc/g). The in situ gas content values are high enough to produce methane from coal beds. The overall study concludes that the Sitarampur block from Raniganj Coalfield is suitable for hydrocarbon generation and extraction. [ABSTRACT FROM AUTHOR]

Coal mining and ancillary activities have the potential to cause water pollution characterized by acid mine drainage, acid mine leachates, extreme pH conditions and heavy metal contaminations. In the present work, 33 water samples in premonsoon and 34 water samples in monsoon were collected from the surface water bodies of Ib Valley coalfield, India for hydrogeochemical analysis. In premonsoon, pH, TSS, Turbidity, DO, BOD, COD, Magnesium, Cadmium, Selenium, Nickel, Aluminum and in monsoon, pH, TSS, Turbidity, DO, BOD, COD, Iron, Cadmium, Selenium, Nickel and Aluminum were nonconforming to the permissible limit set by the Bureau of Indian Standards, World Health Organisation and Ministry of Environment, Forest and Climate Change, Government of India. The average BOD/COD ratio of less than 0.6 in both seasons indicated Ib valley coalfield water was not fairly biodegradable. The analysis of variance (ANOVA) revealed that significant seasonal variation (p < 0.05) was observed in the hydro-chemical parameters viz. TSS, turbidity, redox potential, acidity, total hardness, bicarbonate alkalinity, chloride, sulfate, nitrate, sodium, calcium, magnesium, iron, cadmium, chromium and magnesium during the entire sampling period. Whereas, no significant seasonal variation (p > 0.05) was observed in pH, EC, TDS, DO, BOD, residual chlorine, COD, oil and grease, fluoride, potassium, zinc, copper, selenium, nickel, aluminum, boron, silica, temperature, salinity, cyanide and phenol. Water Quality Index revealed that 39.39% and 35.29% samples belong to poor water quality category in premonsoon and monsoon, respectively. As per Heavy Metal Pollution Index, Degree of Contamination (Cd) and Heavy metal evaluation index, medium degree of pollution were exhibited by 51.52%, 30.30% and 45.45% samples in premonsoon and 20.59%, 35.29% and 26.47% samples in monsoon. Whereas, 5.88%, 2.94% and 5.88% samples were having high degree of pollution in monsoon and 15.15% samples caused high degree of pollution with respect to Cd in premonsoon. However, EC, Na%, PI, SAR and RSC values suggested that the water can be used for irrigation. Water type of the region had been found to be Ca–Mg–Cl–SO4 by Piper diagram. [ABSTRACT FROM AUTHOR]

The current study aims to characterize and estimate the particulate matter (PM) exposure level of the population near an opencast coal mine. PM concentrations of different sizes were monitored at 32 locations distributed uniformly in the study area for spatial profiling and at 1 location for analysing the temporal variations and characterization of dust. Health impacts of PM to nearby residents were estimated using the air quality index (AQI) values and were cross-validated using the health survey data. The monitoring results indicated that the 15 min average concentrations of PM10 and PM2.5 were 2.3–2.4 times of the corresponding 24 h National Ambient Air Quality Standards (NAAQS) in all the monitoring stations. Low wind speed during monitoring campaign that resulted in little PM dispersion is suggested to be the reason for this. AQI levels at five villages surrounding the mine were "moderate to severe" during morning-hours that improved to "satisfactory to moderate" during day-time. Eye irritation and respiratory problems were the two most adverse effects experienced by the residents living nearby to the mine. The health survey data and the corresponding AQI values indicate that respiratory problem is well correlated with the AQI values. The dust contains mainly six major elements in the order of O > C > F > Si > Al > Fe > Ca, accounting for 95% of the weight percentages of the 20 elements for which the characterization was carried out. [ABSTRACT FROM AUTHOR]

Tsurang, a major river in the Mokokchung district of Nagaland, northeast India, shares great aspects of traditional importance for the Ao Naga tribes and is a part of natural commodity providing water to the agrarian community for irrigation and livestock rearing. However, various environment detrimental activities are practiced along the course of the riverbank, particularly coal mining and agriculture. The present study was conducted to examine the seasonal water quality index (WQI) of the Tsurang river from three selected sampling stations. Overall, the water quality status was rated as "Good" in winter and spring while "Poor" in summer and autumn. In all the seasons, downstream (S3) located at the human settlement area presented higher WQI values compared to upstream (S1) and midstream (S2). The parameters such as turbidity, DO and BOD played a central role in affecting the WQI; although, no such significant roles in case of nutrient elements were observed in affecting the water quality. The WQI revealed that Tsurang river water is deteriorated due to coal mining and other anthropogenic activities practiced along the stretch of the river and the water needs to be pretreated before consumption. Therefore, proper management strategies and conservation efforts should be enforced and regulated by policymakers to protect the river from further contamination. [ABSTRACT FROM AUTHOR]

Jharia Coalfield (JCF) is one of the oldest coalfields in the eastern part of India and falls under critically polluted areas as per CPCB/MoEFCC Notification. Therefore, a study of air pollution and its management is the demand of the day. This study had been undertaken to know the current status of JCF concerning air quality. Ambient air quality monitoring with reference to particulate matter (PM10 and PM2.5), SO2, NOx and trace elements had been conducted in the coal mining areas of JCF. The study area was divided into two groups, mainly fire and non-fire for the sampling of air. Principal component analysis (PCA) identified coal mine fire as a major source of air pollution in the mining areas of JCF. Air quality index (AQI) was calculated which revealed that the air quality index of coal mine fire-affected areas was nearly 1.5 times higher than that of the non-mine fire areas. [ABSTRACT FROM AUTHOR]

Opencast coal mining has caused severe environmental degradation globally. In India, Jharkhand is infamous for the environmental damage already caused by unregulated coal mining practices so far. In the present investigation, surface water samples from 31 locations in Charhi and Kuju coal mining areas were analysed for physical and chemical parameters of water. Statistical analysis was performed to understand the magnitude of contamination and suitability of the water samples for agricultural as well as domestic uses. Analysis of variance indicated significant site-wise (6 out of 15 parameters) and seasonal variations (13 out of 15 parameters), while Pearson correlation indicated significant positive correlations between TDS-EC (r2 = 0.74–0.99) and total hardness—HCO3− (r2 = 0.95–0.98). Scatter plot between Ca, Mg and HCO3 revealed a positive interrelationship in all the three seasons. Surface water quality indices exhibited variable results of sustainable utilization potential of the water for various uses. Though water quality index advocated the quality of water to be good in the majority of the samples, health water quality index based on selected parameters hinted, the majority of the samples to be of poor category. Observations collated together suggest that though the area is in the initial phases of mining, contamination of the surface water bodies is increasing gradually and higher concentrations of metals (As, Fe, Mn, Se) are the most significant problem now. This study can serve as a baseline data and an early sentinel towards the increasing pollution and its effective environmental management in similar mining regions of the world. [ABSTRACT FROM AUTHOR]

The present investigation is an attempt to assess the contamination of heavy metals in the ground and surface water of the Singrauli industrial belt area. Pollution indices like heavy metal index (HPI), contamination index (CD) and heavy metal evaluation index (HEI) are used for the evaluation of heavy metal pollution (arsenic As, mercury Hg, cadmium Cd, and lead Pb). Contour maps are constructed to interpret metal spatial distribution. Further, the land-use/land-cover (LULC) maps for the year 2000, 2010 and 2016 are prepared using Landsat satellite data. A total of 48 water samples (Groundwater (27), Surface water (21)) are analysed for heavy metal concentration. Eighty-eight percent of groundwater and 90% of surface water samples are contaminated with Hg. Similarly, high concentrations of Pb and Cd were found in the samples. Surprisingly, all the water samples have As concentration above the WHO permissible limit of 10 ppb. Further, 95% of the samples have an HPI value greater than 100 indicating high heavy metal contamination. CD value denotes contamination of 89% of the samples with heavy metals (As, Hg, Cd, Pb). Through spatial distribution, it can be interpreted that most of the contaminated samples lie near thermal power plants, ash ponds, and coal mines. LULC (land use/land cover) study shows a significant decrease in water bodies by (108 km2), agricultural land by (54 km2) and bare/fallow land by (51 km2) from 2000 to 2016. During these 16 years, there has been a fourfold increase in the overburden, a threefold increase in dumping yards, a 2.5 times increase in urban areas, and a twofold increase in mining areas. Both the environment and the water quality are deteriorating at an alarming rate. Such scientific investigations are relevant for risk management studies of potable water. The knowledge acquired from such assessment shall be considered with utmost priority by concerned authority considering degrading water quality in the study area. Hence, this study is applicable for designing action plans and control measures to reduce water resource pollution. [ABSTRACT FROM AUTHOR]

The overburden dumps which are created during the process of mining are devoid of supportive and nutritive capacity for biomass development. Restoration of these overburden dumps requires the establishment of a self-sustaining soil–plant system, for which a restoration strategy is needed to accelerate the natural processes of ecosystem development. For eco-restoration of a coal mine spoil dump, National Environmental Engineering Research Institute developed an ecofriendly multidisciplinary approach to restore the fertility of the mine spoil overburden dump. In this regard, an experiment was conducted to restore the fertility of the overburden dump in an area of 20 ha at Durgapur in India. To reclaim the dump, the IBA (integrated biotechnological approach) was used. The integrated biotechnological approach involves the utilization of industrial waste ETP sludge (effluent treatment plant sludge) to support the nutritive capacity for vegetation establishment, inoculation, and isolation of Azotobacter, Bradyrhizobium, and VAM (vesicular arbuscular mycorrhiza) spores of Gigaspora and Glomus species along with suitable indigenous trees of ecological and economic importance. The findings of the experimental study revealed that amendment of the mine spoil with organic amendment at 50 t/ha improved the nutrient, microbiological, and physicochemical properties of the coal mine spoil and reduced the toxicity of heavy metals due to increased organic carbon content of the organic amendment effluent treatment plant sludge. Thus, amendment of the effluent treatment plant sludge and biofertilizer application provided better supportive material for the growth of different plant species which resulted into momentous biomass (aboveground biomass and belowground biomass) production thereby improving the productivity and fertility of the mine spoil dump in a short span. Thus, using IBA, the ecology and biodiversity of the area was conserved. It also helped to maintain the aesthetic environment surrounding the mine site. [ABSTRACT FROM AUTHOR]

India is a developing country, where boosting of modern energy supply is the primary requirement for economic growth. About two-thirds of this energy is fulfilled with coal alone, thereby increasing the demand for coal steadily. As a result, the coal mining industry has experienced an incredible growth, which causes severe environmental and social damage. Based on the analysis of socio-environmental impact, this study has developed a framework for sustainable improvement in performance of coal mining operations using an integrated approach of interpretative structural modelling and fuzzy MICMAC (Matriced' Impacts Croises-Multipication Applique' and Classment) analysis. To develop the framework, the contextual relationship among the parameters has been defined by discussions with experts from industry and academics. It presents a control sequence from leading to lagging parameters of coal mining showing the strength of relationship on the connecting links. In this study, "Research and technical development" and "employees training and welfare" are found to be the primary leading parameters that directly or indirectly influence all the remaining parameters of the system. Therefore, the control measures should be applied first on these parameters. Conversely "health quality" is found to be the lagging parameter which has very little or no impact on the system. The final model has been verified by the industry experts. Outcomes of this framework can help the decision-makers of coal mining industry in policy development for sustainable improvement in performance of coal mining operations. The framework can also be used as a tool to manage the parameters of coal mining and other similar types of industries as well. [ABSTRACT FROM AUTHOR]

Background: Biosurfactants (BSs) are amphipathic, surface active molecules produced by microorganisms and can reduce the surface tension and interfacial tension. The present study emphasizes the isolation and structural characterization of the BS produced by Pseudomonas otitidis P4. Results: An efficient BS producing bacterial strain isolated from the unexplored coal mining site of Chirimiri, India was identified as P. otitidis P4 based on morphological, biochemical and 16S rRNA gene sequence analysis. The surface tension of the culture medium was reduced from 71.18 to 33.4 mN/m. The surface tension and emulsification activity of the BS remained stable over a wide range of temperature, pH and salt concentrations indicating its scope of application in bioremediation, food, cosmetics, and pharmaceutical industries. Structural attributes of BS were determined by biochemical tests, thin layer chromatography (TLC), Fourier transform infrared (FTIR) and nuclear magnetic resonance (H NMR) spectroscopy analyses, which confirmed the glycolipid nature of BS. Lipid and sugar fractions were the main constituents of the extracted BS. Thermogravimetric (TG) and Differential scanning calorimetry (DSC) analyses showed the thermostable nature of BS. As determined from TGA graph, the degradation temperature of biosurfactant was found to be 280 °C while complete weight loss was observed after 450 °C. Conclusion: The BS isolated from P. otitidis P4 was identified as glycolipid and showed high emulsification activity and stability in a wide range of temperature, pH and salinity which makes it suitable for various industrial and environmental applications. [ABSTRACT FROM AUTHOR]

This study compares the ambient air particulate matter (PM10) data of 15 different coal mine environments. For most of these mine environments, the monitoring was carried out by different researchers using respirable dust sampler (RDS) that separates PM10 by centrifugal inertial separation. At two sites - Padmapur and Ghugus (Chandrapur, Maharashtra, India) - mass inertial impaction-based sampler was used for PM10 monitoring. It is observed that the spatiotemporal average value of ambient air PM10 monitored using mass inertial impactor reports relatively higher values (240-372 μg/m) compared to those monitored using RDS (<227 μg/m). In order to realize the severity of mine area pollution, it is compared with PM10 values found in an urban area (Delhi, India). It is found that PM10 values in Delhi (using mass inertial impactor) are much higher (300-400 μg/m) than those reported for the mine environment. The data seems to indicate that the mine environment is relatively cleaner than urban air and therefore raises doubt about the appropriateness of using either mass impactor or RDS for PM10 sampling. [ABSTRACT FROM AUTHOR]

Plant available nitrogen, belowground (root) biomass, soil nitrogen (N) mineralization and microbial biomass N (MBN) were studied for 12 years at the interval of 2 years (0, 2, 4, 6, 8, 10 and 12 years) and mine dump stability at the intervals of 6 years (0, 6 and 12 years) after re-vegetation on coal mine spoil site. Plant available nitrogen in revegetated mine spoil ranged from 4.51 to 6.59 μg g, net N-mineralization from 1.87 to 13.85 μg g month, MBN from 10 to 22.63 μg g, and root biomass from 28 to 566 g. Mining activity has caused a change in soil characteristics including plant available nutrients like nitrate-N, ammonium-N and phosphate-P by 70, 67, and 76 %, respectively, N-mineralization by 93 %, root biomass values by 97 % and MBN values by 91 % compared to forest ecosystems. Revegetation of mine spoil produced increase in root biomass values by 1.3, 7.6 and 17.2 times, mineral N values by 1.22, 1.43 and 1.79 times, N-mineralization values by 1.8, 5.2 and 12.6 times and MBN values by 1.6, 2.0, and 3.4 times in 2, 6 and 12 years, respectively. Below ground biomass was highly co-related with microbial biomass and plant available nutrients. N-mineralization, plant available nutrients and the clay content were positively correlated with age of revegetation ( P < 0.01). From the numerical modelling it was analyzed that revegetation increased the dump slope stability with a factor of safety of 1.7 and 2.1 after 6 and 12 years of plantation on dump slope, respectively, while it was 1.2 before revegetation. Thus, long term revegetation was found to have direct impact on dump stability and indirect impact on soil fertility status in mine spoil, where plant biomass and microbial biomass provide major contributions in ecological redevelopment of the mine spoil. [ABSTRACT FROM AUTHOR]

India is the first country to introduce environmental legislation in the constitution but because of lengthy legal procedures, it is very difficult to control environmental deterioration. There are many factors responsible for this deterioration. Coal mining is one such activity where deterioration is very severe and the present communication aims this aspect. Coal is the one of the most essential mineral having large reserves in India. It’s mining and beneficiation produce a variety of pollutants. The main pollutants emitted during the processing of coal are green house gases, coal dust and acid mine drainage. Many reports on different aspects of coal mining are available including reports on emission of different pollutants but the present work is probably only of it’s kind in which the authors have tried to determine environment liability directly in terms of economy. It was found that greenhouse liabilities, coal dust liability and sulphur liability are accounted for 12.07, 5.0 and 101.97 US$, making an overall 2.4% of the total economic gains due to coal mining. During the calculations approximate number of total workers and other parameters have been taken into consideration. Who pays for this irreversible damage is a question. [ABSTRACT FROM AUTHOR]

The present study investigated the chemical composition of wet atmospheric precipitation in India’s richest coal mining belt. Total 418 samples were collected on event basis at six sites from July to October in 2003 and May to October in 2004 and analysed for pH, EC, F−, Cl−, $$\rm SO_4^{2 - } $$ , $$\rm NO_3^ - $$ , Ca2+, Mg2+, Na+, K+ and $$\rm NH_4^ + $$ . The average pH value (5.7) of the rainwater of the investigated area is alkaline in nature. However, the temporal pH variation showed the alkaline nature during the early phase of monsoonal rainfall but it trends towards acidic during the late and high rainfall periods. The rainwater chemistry of the region showed high contribution of Ca2+ (47%) and $$\rm NH_4^ + $$ (21%) in cations and $$\rm SO_4^{2 - } $$ (55%) and Cl− (23%) in anionic abundance. The high non seas salt fraction (nss) of Ca2+ (99%) and Mg2+ (96%) suggests crustal source of the ions, while the high nss $$\rm SO_4^{2 - } $$ (96%) and high $${{{\text{SO}}_{\text{4}}^{{\text{2 - }}} } \mathord{\left/ {\vphantom {{{\text{SO}}_{\text{4}}^{{\text{2 - }}} } {\left( {NO_3^ - + C1^ - } \right)}}} \right. \kern-\nulldelimiterspace} {\left( {NO_3^ - + C1^ - } \right)}}$$ ratio signifying the impact of anthropogenic sources and the source of the acidity. The ratio of $${{{\text{SO}}_{\text{4}}^{{\text{2 - }}} + NO_3^ - } \mathord{\left/ {\vphantom {{{\text{SO}}_{\text{4}}^{{\text{2 - }}} + NO_3^ - } {\left( {NH_4^ + + Ca^{2 + } } \right)}}} \right. \kern-\nulldelimiterspace} {\left( {NH_4^ + + Ca^{2 + } } \right)}}$$ varies from 0.03 to 3.23 with the average value of 0.84 suggesting that Ca2+ and $$NH_4^ + $$ play a major role in neutralization processes. The assessment of the wet ionic deposition rates shows no any specific trend, however Ca2+ deposition rate was highest followed by $$\rm SO_4^{2 - } $$ and $$\rm NH_4^ + $$ . [ABSTRACT FROM AUTHOR]

Stratospheric input and photochemical ozone formation in the troposphere are the two main sources determining the ozone levels in the surface layer of the atmosphere. Because of the importance of ozone in controlling the atmospheric chemistry and its decisive role in the heat balance of atmosphere, leading to climate change, the examination of its formation and destruction are of great interest. This study characterized the distribution of Ground level Ozone (GLO) in Chandrapur district is lying between 19°25′N to 20°45′N and 78°50′E to 80°10′E. Continuous ozone analyzer was used to quantify GLO at thirteen locations fixed by Global Positioning System (GPS) during the winter of 2005–2006. The daily GLO at all the locations ranged between 6.4 and 24.8 ppbv with an average and standard deviation of 14.9 ± 6.5 ppbv. The maximum and minimum concentration occurs during 1300–1600 h and 0300–0500 h may be due to high solar radiation facilitating photochemical production of O3 and downward mixing from the overlying air mass and in situ destruction of ozone by deposition and/or the reaction between O3 and NO. GIS based spatial distribution of GLO in Chandrapur district is indicates that the central core of the district and southern sites experienced elevated levels of GLO relative to the northern and western areas. The sites near by Chandrapur city are particularly affected by elevated GLO. The average variation of GLO with temperature shows a significant correlation of r = 0.55 indicating a direct relationship between GLO and temperature. Similarly an attempt has been made to compare the GLO monitored data in Chandrapur district with the reported values for other locations in Indian cities. This generated database helps regulatory agencies to identify locations where the natural resources and human health could be at risk. [ABSTRACT FROM AUTHOR]

Every mine in India has to obtain environmental clearance from the Govt. Air pollution is one of the most important parameters to be considered in preparing an EIA. However, there is no well defined method for predicting thr air pollution impact due to mining. Increasing trend of opencast (O/C) mining leads to production of huge quantities of dust. Emission factor data have been utilised to quantify the generation of dust. The project under study is one of the largest opencast project (OCP) for coking coal. The main sources of air pollution have been identified. The rate of emission per unit of a given activity known as an emission factor has been utilised, taking local factors into account. It has been estimated that due to topsoil removal, overburden (O/B) removal, extraction of coal, size reduction generated 7.8 t of dust per day. Wind erosion generated 1.6 t of dust per day and the whole operation produced dust which accounted for 9.4 mt/day. They cause air pollution in the work zone and surrouding locations. The methodology adopted may be used to quantify generation for other projects also. [ABSTRACT FROM AUTHOR]