Search

Many urban planners have used Lefebvre's concept of the right to the city as a dominant approach in urban studies. In this research, we try to draw a framework for the urban development of Bandar Abbas through the application of urban development components based on the right-to-the-city approach. Interpretive structural modeling is used in drawing urban development based on the right-to-the-city approach. The centrality of citizens in decision-making, self-management of space, the right to planning and designing the space, the right to transparency, and access to information at the first class are considered the key variables of Bandar Abbas urban development. The right to manage and organize the space, the right to accountability, democratic (institutional) capacity building, and social priorities in the decision-making process are the subcomponents of Bandar Abbas urban development. The presented model is the realization of people in space, where people take over the space and enjoy the benefits of urban life, if needed, they can freely express their opinions and limitations in the space and organize the city according to their needs. [ABSTRACT FROM AUTHOR]

While steer-by-wire (SBW) systems benefit from improved performance and comfort, they require a large number of sensors impacting whole system reliability. In order to address this challenge fault tolerance property against sensor faults has to be improved. Application of redundancy for the sensors is the best solution proposed so far. This paper proposes a novel solution of analytical redundancy based on various position estimation methods for both electrical motor and steering wheel position sensors. Three different estimation techniques including extended programmable cascaded low-pass filter (EPCLPF), stator flux linkage estimator using stator currents, as well as stator flux linkage estimator using stator voltages are proposed for this purpose. The faulty sensors are recognized using a voting technique in which a comparison between the sensors' outputs with the estimated values is made. In this way, the SBW system reliability is highly improved with no additional cost and space. Simulation and experimental results are presented to confirm the presented fault tolerant SBW system capabilities. [ABSTRACT FROM AUTHOR]

Groundwater level observations due to the lack of synoptic water-level measurements are often available with irregular time intervals. The results lead to an inaccurate understanding of the parameters affecting groundwater level changes and their time delays. This paper presents a simple and low-cost approach to interpolate the irregular, periodic intervals of recorded groundwater level data for the Najafabad aquifer located in central Iran. Forty-six monitoring wells with an average of 20 years of data were used for this study. Piecewise cubic Hermite interpolating polynomial (PCHIP), cubic spline, linear, and nearest neighbor are the selected interpolation methods. Cross-validation with leave-one-out technique was also applied to evaluate the accuracy of the methods under three conditions, including low, average, and high groundwater level decline. The analysis proved that (1) PCHIP interpolation showed a high performance in all of the groundwater level decline conditions (0.22 < RMSE < 0.59 and 0.72 < R2 < 0.98). (2) Under slight and without abrupt fluctuations of groundwater level conditions, cubic spline showed a better performance than the linear interpolation (R2 = 0.98, RMSE = 0.49 for cubic spline and R2 = 0.98, RMSE = 0.51 for linear). The selected approach reduces the uncertainty in the study of issues such as changes in groundwater recharge and storage, groundwater flow directions, surface–groundwater interaction, and groundwater modeling. [ABSTRACT FROM AUTHOR]

Steer-by-wire (SBW) systems benefit from several advantages including lower weight, volume, and cost compared to counterpart electric power steering systems. However, system reliability is impacted since SBW performance is highly dependent on correct operation of several voltage, current, speed, yaw rate, and position sensors. This paper presents a new method in SBW system reliability improvement by introducing a novel fault detection, isolation, and reconstruction (FDIR) control technique. The proposed FDIR method detects if any fault is observed on voltage or current sensors and identifies the faulty sensor location. Additionally the identified faulty sensor's output is replaced with an estimated value to allow system continuous fault-ride through operation. The SBW system equipped with proposed FDIR technique provides fault-tolerance property against up to 3 faulty voltage or current sensors. Therefore, enhanced overall reliability is obtained at no further hardware costs associated with additional sensors redundancy solutions. The proposed technique is studied using system modelling and hardware prototyping, and its effectiveness is demonstrated using simulation and experimental results. [ABSTRACT FROM AUTHOR]

Laser shock peening (LSP) is known as a post processing surface treatment which can improve the mechanical properties of some materials. Shock waves are generated by confining the laser-induced plasma to cause a large pressure shock wave over a significant surface area. In the present study, effects of LSP on the electrochemical corrosion and micro hardness properties of 316L stainless steel alloy were investigated by changing the laser parameters such as the laser spot size, the average number of impacts, and the laser intensity. Since laser parameters do not cover the desired region of LSP, we have to use the proper design of experiment method, in which the D-optimal design of MATLAB was selected. Results revealed that by increase in irradiance, number of impacts and spot size of laser beam, improvement in the surface micro hardness, and corrosion resistance is achieved. Also, due to unexpected drop into the outcome of our experiments, it was found that the contamination of the transparent overlay and reduction of the absorption coefficient of the absorbent layer play a key role to reduce the efficiency of the mechanical impacts. So, by changing the experimental conditions, even better results are expected. [ABSTRACT FROM AUTHOR]

Understanding the growth dynamics of influenza viruses is an essential step in virus replication and cell-adaptation. The aim of this study was to elucidate the growth kinetic of a low pathogenic avian influenza H9N2 subtype in chicken embryo fibroblast (CEF) and chicken tracheal epithelial (CTE) cells during consecutive passages. An egg-adapted H9N2 virus was seeded into both cell culture systems. The amount of infectious virus released into the cell culture supernatants at interval times post-infection were titered and plaque assayed. The results as well as cell viability results indicate that the infectivity of the influenza virus was different among these primary cells. The egg-adapted H9N2 virus featured higher infectivity in CTE than in CEF cells. After serial passages and plaque purifications of the virus, a CTE cell-adapted strain was generated which carried amino acid substitutions within the HA stem region. The strain showed faster replication kinetics in cell culture resulting in an increase in virus titer. Overall, the present study provides the impact of cell type, multiplicity of infection, cellular protease roles in virus infectivity and finally molecular characterization during H9N2 virus adaptation procedure. [ABSTRACT FROM AUTHOR]

Thick films of calcinated and non calcinated nanobioglass (NBG)-titania composite coatings were prepared on stainless steel substrates by alkoxide sol-gel process. Dip-coating method was used for the films preparation. The morphology, structure and composition of the nano composite films were evaluated using environmental scanning electron microscope, X-ray diffraction and Fourier transform infrared spectroscope. The SEM investigation results showed that prepared thick NBG-titania films are smooth and free of macrocracking, fracture or flaking. The grain size of these films was uniform and nano scale (50-60 nm) which confirmed with TEM. Also FTIR confirmed the presence of Si-O-Si bands on the calcinated NBG-titania films. The hardness of the prepared films (TiO-calcinated NBG and TiO-Non calcinated NBG) was compared by using micro hardness test method. The results verified that the presence of calcinated NBG particles in NBG-titania composite enhanced gradually the mechanical data of the prepared films. The in vitro bioactivity of these films was discussed based on the analysis of the variations of Ca and P concentrations in the simulated body fluid (SBF) and their surface morphologies against immersion time. Surface morphology and Si-O-Si bands were found to be of great importance with respect to the bioactivity of the studied films. The results showed that calcinated NBG-titania films have better bioactivity than non calcinated NBG-titania films. [ABSTRACT FROM AUTHOR]

Overhead crane movement results in suspended load sway, which may cause dangers and damages. Common anti-sway methods are based on swing angle information. This paper presents a novel method that uses load cell sensors for swing angle estimation. According to our proposed method, a damping signal is generated and added to the speed reference in order to suppress the suspended load sway. Conventional methods of swing angle estimation are based on measurement by camera vision, acceleration, or some other type of sensor. Compared to conventional methods, the proposed method based on load cell is simpler to build and less sensitive to ambient conditions. The effectiveness of the method is verified by computer simulation. [ABSTRACT FROM AUTHOR]