Search

The main purpose of this paper is the numerical analysis of a class of mathematical models that describe the contact between a thermo-piezoelectric body and a conductive foundation. Under the assumption of a static process, the material's behavior is modeled with a linear thermo-electro-elastic constitutive law and the frictional contact with Signorini's and Tresca's laws. A variational problem is derived and the existence of a unique weak solution is proved by combining arguments from the theory of variational inequalities with linear strongly monotone Lipschitz continuous operators. A successive iteration technique to linearize the problem by transforming it into an incremental recursive form is proposed, and its convergence is established. An Augmented Lagrangian variant, known as the Alternating Direction Multiplier Method (ADMM), is employed to split the original problem into two subproblems, resolve them sequentially, as well as update the dual variables at each iteration. To illustrate the performance of the proposed approach, several numerical simulations on two-dimensional test problems are carried out. [ABSTRACT FROM AUTHOR]

In this paper, we have considered a deterministic mathematical model to analyze effective interventions for meningitis and pneumonia coinfection as well as to make a rational recommendation to public healthy, policy or decision makers and programs implementers. We have introduced the epidemiology of infectious diseases, the epidemiology of meningitis, the epidemiology of pneumonia, and the epidemiology of infection of meningitis and pneumonia. The positivity and boundedness of the sated model was shown. Our model elucidate that, the disease free equilibrium points of each model are locally asymptotically stable if the corresponding reproduction numbers are less than one and globally asymptotically stable if the corresponding reproduction numbers are greater than one. Additionally, we have analyzed the existence and uniqueness of the endemic equilibrium point of each sub models, local stability and global stability of the endemic equilibrium points for each model. By using standard values of parameters we have obtained from different studies, we found that the effective reproduction numbers of meningitis R e f f (m) = 9 and effective reproduction numbers of pneumonia R e f f (p) = 11 that lead us to the effective reproduction number of the meningitis and pneumonia co-infected model is m a x R e f f m , R e f f (p) = 9 . Applying sensitivity analysis, we identified the most influential parameters that can change the behavior of the solution of the meningitis pneumonia coinfection dynamical system are α 1 , α 2 and π . Biologically, decrease in α 1 and increasing in π is a possible intervention strategy to reduce the infectious from communities. Finally, our numerical simulation has shown that vaccination against those diseases, reducing contact with infectious persons and treatment have the great effect on reduction of these silent killer diseases from the communities. [ABSTRACT FROM AUTHOR]

In this paper, our aim is mathematical analysis and numerical simulation of a prey-predator model to describe the effect of predation between prey and predator with nonlinear functional response. First, we develop results concerning the boundedness, the existence and uniqueness of the solution. Furthermore, the Lyapunov principle and the Routh–Hurwitz criterion are applied to study respectively the local and global stability results. We also establish the Hopf-bifurcation to show the existence of a branch of nontrivial periodic solutions. Finally, numerical simulations have been accomplished to validate our analytical findings. [ABSTRACT FROM AUTHOR]

In this paper, our aim is mathematical analysis and numerical simulation of a prey-predator model to describe the effect of predation between prey and predator with nonlinear functional response. First, we develop results concerning the boundedness, the existence and uniqueness of the solution. Furthermore, the Lyapunov principle and the Routh–Hurwitz criterion are applied to study respectively the local and global stability results. We also establish the Hopf-bifurcation to show the existence of a branch of nontrivial periodic solutions. Finally, numerical simulations have been accomplished to validate our analytical findings. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of exponential stability and stabilization for a class of delayed distributed parameter systems, which is modeled by partial integro-differential equations (PIDEs). By employing the vector-valued Wirtinger's inequality, the sufficient condition of exponential stability of the PIDE system with a given decay rate is investigated. The condition is presented by linear matrix inequality (LMIs). After that, we develop a spatial proportional-integral-derivative state-feedback controller that ensures the exponential stabilization of the PIDE system in terms of LMIs. Finally, numerical examples are presented to verify the effectiveness of the proposed theoretical results. [ABSTRACT FROM AUTHOR]

The paper reports the results of theoretical and experimental tests of a forming process for producing ball studs which are widely used in the automotive industry. It is proposed that semi-finished ball studs are produced by cross wedge rolling in a double configuration. The theoretical analysis was performed by numerical techniques based on the finite element method. Numerical computations were made using the simulation software DEFORM v 11.0. During the simulations, the accuracy of the adopted tool design was verified, and optimal parameters of the process along with the effect of selected parameters of the process and the quality of produced parts were determined. The proposed rolling process was verified under laboratory conditions using a flat-wedge forging machine available at the Lublin University of Technology. The experimental findings show a high agreement with the numerical results, in terms of both quality and quantity. The results confirm that ball studs can be produced by the proposed cross wedge rolling technique. [ABSTRACT FROM AUTHOR]

Although previously developed Dielectrophoresis activated cell sorters (DACSes) have achieved high separation efficiency, limitations still exist with respect to the low throughput. In this paper, therefore, a numerical analysis is presented for a novel DACS to achieve not only high efficiency but also high throughput. Additionally, experimental validation is performed based on the results of a numerical simulation. First, streamlines in the channel are investigated according to various flow rate ratios in each outlet. After cells are deflected by a sufficient amount of dielectrophoretic force, they arrive at the tip of the last electrode pair. Their movement is then determined by hydrodynamic force. Therefore, it is important to confirm whether or not the streamline at the tip of the last electrode pair connects to the target area. Based on the streamline analysis results, the particle trajectory under various AC electric fields is investigated using a three-dimensional analysis. Accordingly, an input voltage condition (7 Vp-p at 10 kHz) is selected to confirm the influence of dielectrophoretic force. Conclusively, optimal flow rates under the determined input voltage condition are selected as 10 μl/min and 20 μl/min in outlet A (target area) and outlet B (non-target area), respectively. In order to validate the feasibility of the selected flow rates, a separation test is performed employing a K562 cell-bone marrow cancer cell-as a target cell. In the experiment, the proposed DACS achieves a high throughput of 45000 cells/min as well as a separation efficiency of 96.5% and recovery rate of 47.25%. [ABSTRACT FROM AUTHOR]

This paper proposes the use of a specific combination of discrete and finite element methods for the simulation of systems of deformable bodies in order to reduce the computational cost, when certain assumptions can be made. In particular, the Updated Lagrangian finite element formulation and the central difference time integration method are employed together with certain simplifying assumptions in order to linearize this highly nonlinear contact problem and obtain solutions with realistic computational cost and sufficiently good accuracy. Furthermore, the paper discusses software implementation issues and the advantages that the Java technologies can offer in the development of such engineering applications. [ABSTRACT FROM AUTHOR]

In this paper, the numerical simulation method is used to study spectral properties of sample covariance matrices. [ABSTRACT FROM AUTHOR]

A discrete element code with impact model has been developed and calibrated to simulate the dynamic behavior of rock materials, with special regard to rock fragmentation upon impact during rock-fall analysis. The paper summarizes the discrete element code, the calibration algorithms developed to identify the model microparameters, and the impact model. Experimental work on drop tests is then used to validate the code on modeling impact fragmentation. It has been found that the developed discrete element code and impact model can reasonably simulate rock fragmentation in drop tests. The use of the discrete element code and impact model can provide good reference results in evaluating impact fragmentation in rock-fall analysis. [ABSTRACT FROM AUTHOR]

This paper presents computer simulation of the forging process using the finite volume method (FVM). The process of forging is highly non-linear, where both large deformations and continuously changing boundary conditions occur. In most practical cases, the initial billet shape is relatively simple, but the final shape of the end product is often geometrically complex, to the extent that it is commonly obtained using multiple forming stages. Examples of the numerical simulation of the forged pieces provided were created using Msc/SuperForge computer code. The main results of the analysis are deformed shape, temperature, pressure, effective plastic strain, effective stress and forces acting on the die. [ABSTRACT FROM AUTHOR]