Search

At present, in order to conduct non‐destructive testing on the grounding grid of substations under the condition of continuous power supply and no excavation, researchers have applied wireless technology based on electrochemical methods to remotely monitor the corrosion state of grounding conductors online. Nevertheless, wireless signals are affected by the environment when they are transmitted underground. In the field of grounding gird wireless monitoring, how to plan the information transmission path of wireless sensor network (WSN) with high accuracy of data transfer and low energy consumption earns growing research attention. To address the problem of WSN path planning in grounding grid area, a path planning method for WSN based on the hybrid algorithm of map‐matching algorithm and double‐pole search algorithm (MM‐DPS) is proposed in this paper. The map‐matching algorithm is employed to calculate the optimal sampling node number of the data transmission path. On the basis of the optimal sampling node number, the double‐pole search algorithm is employed in seeking out each sensor node of the path, and two groups of path plans are obtained. In the simulation experiment, compared with the A‐star algorithm, the MM‐DPS algorithm shortens the data transmission path length by about 39% and reduces the energy consumption by about 57%. The research work brings a method to alleviate the problem of data transmission underground of WSN in grounding grid area. The method not only ensures the accuracy of data transmission, but also shorts the transmission distance and reduces energy consumption. [ABSTRACT FROM AUTHOR]

Conservation voltage reduction (CVR) is a strategy that tries to save energy consumption by managing consumers' voltage. On the other hand, enhancing reactive power compensation in the power system gives rise to CVR implementation more effectively. This paper addresses how the power system planner could encourage investment to establish the above‐mentioned topics. Here, a model for encouraging industrial loads to dynamically invest in implementing the CVR strategy over the planning horizon is presented. To make CVR implementation more efficient, investment in upgrading plug‐in electric vehicles (PEVs) chargers to be utilized as reactive power compensators is also considered. Industrial loads benefit from saving in their electricity bills and incentive payments that might be paid by utilities (if necessary). The objective function of the proposed planning model is to maximize the energy‐saving of industrial loads and to minimize incentive payment by electric utilities over the planning horizon. This objective is achieved subject to that the investment plan is economically feasible. Moreover, power system operation constraints in the planning horizon based on AC power flow equations and voltage‐dependent load models are considered. The proposed planning problem is modelled as a non‐linear optimization problem that can be solved by off‐the‐shelf software, for example, GAMS. The proposed model is applied to the Ontario transmission system. The numerical results show the proposed model's effectiveness in designing an investment plan for industrial loads to implement the CVR strategy and upgrade PEVs' chargers. Here, a model for encouraging industrial loads to dynamically invest in implementing the conservation voltage reduction (CVR) strategy over the planning horizon is presented. To make CVR implementation more efficient, investment in upgrading plug‐in electric vehicles (PEVs) chargers to be utilized as reactive power compensators is also considered. The objective function of the proposed planning model is to maximize the energy‐saving of industrial loads and to minimize incentive payment by electric utilities over the planning horizon. This objective is achieved subject to the fact that the investment plan is economically feasible. Moreover, power system operation constraints in the planning horizon based on AC power flow equations and voltage‐dependent load models are considered. [ABSTRACT FROM AUTHOR]

Conventional energy resource problems made power system planners apply more renewable energy sources (RESs) in the power system. RESs have a significant impact on fulfilling the world's energy demand, protecting the environment at least in the exploration phase, and providing energy reliability as well as security for the new generation of power grids. In this regard, wind power generation is considered a promising solution. However, by increasing the share of wind power generation units in the power sector, some challenges, such as voltage problems, transient stability, increasing system losses, and line congestions can occur. Consequently, an alternative solution is required to accelerate wind power units' connections to the grid by preventing the problems caused by the penetration of wind power. In this regard, Flexible Alternating Current Transmission Systems (FACTS) devices can play an important role while they can improve power grid dynamic performance. This paper presents a review of the optimization techniques applied to accelerate the penetration of wind energy by exploiting FACTS devices. The topic identifies the objectives and optimization formulations, as well as schemes and models available in the published literature. This survey gives noteworthy insights to the researchers to cover available solutions in these regards. The literature in the field is summarized in different aspects, such as FACTS technology, objective functions, constraints, optimization methods, planning or operation purposes, and load flow types. At each aspect, a comparison is derived to recognize the most important issues. The result of the review is the finding of future work and contributions which can be done in the field of wind energy integration acceleration using FACTS devices and the output of the paper can be used as a guide for researchers to find a new path for research in this area. [ABSTRACT FROM AUTHOR]

Most of the crude oil produced in China is highly viscous and easy to condense, and the pipeline transportation method is mostly heated. At present, frequency conversion technology is gradually applied to oil pump units. In order to find the best pipeline operation scheme, this paper is based on MATLAB programming software and established a corresponding mathematical model of oil pipeline energy consumption. This model innovatively takes the rotational speed of the variable frequency pump as one of the model optimization variables, calculating the pressure change and temperature change between stations of the pipeline, predicting the energy consumption of the pipeline and can guide the optimized operation of the pipeline, which has a high popularization and application value. An example of Qingtie Fourth‐line crude oil pipeline shows that among the genetic algorithm, particle swarm optimization, and simulated annealing algorithms for solving the optimization model, the particle swarm optimization algorithm has fast convergence speed, short optimization time, obtains the most optimal scheme, and can reduce energy consumption by 7.84%, which proves the practicability and creativity of the optimization model. [ABSTRACT FROM AUTHOR]