Search

The Oligocene Nasrand intrusive rocks (NIRs), located in the central part of the Urumieh–Dokhtar magmatic arc, are mainly composed of granite and subordinate diorite and gabbro. These rocks are characterized by the enrichment of light rare earth elements (LREEs), Nb‐Ta negative anomalies, and high LILE/HFSE, suggesting a subduction‐related origin. The felsic rocks with granite compositions have high SiO2 content (69.77–77.88 wt.%), low Mg# (0.02–0.43), low Nb/Ta, and Zr/Hf (Avg: 12.53, and 33.08, respectively). The initial 87Sr/86Sr ratio and εNd(t) values in felsic rocks range from 0.70577 to 0.70576 and 0.4 to −0.3, respectively. These data suggest that these felsic rocks originated from juvenile crust by heat rising from basaltic magmas in an orogenic setting. The mafic‐intermediate rocks and dikes are gabbro, gabbroic diorite, and monzodiorite, with low SiO2 content (48.08–56.11 wt.%) and high Mg# (0.37–0.68), with average ratios of Nb/Ta and Zr/Hf are 27.88 and 39.84, respectively. The initial 87Sr/86Sr ratio and εNd(t) values for mafic‐intermediate rocks and dikes are 0.70583 to 0.70476 and −0.1 to +2.6, respectively. These characteristics indicate magma from a mantle source that had undergone minor mixing with juvenile crust. It seems mantle‐derived juvenile magma underplating played an important role in the crustal growth in the Urumieh–Dokhtar magmatic belt during the Ediacaran to Early Cambrian, relative to other time frames. [ABSTRACT FROM AUTHOR]

Aim: This study aimed to investigate the effect of circadian rhythm stability and amplitude on musculoskeletal disorder prevalence and work–family conflict among nurses. Design: This cross‐sectional study was conducted on 386 nurses working in three hospitals, in Shahroud, Iran. Method: The data were collected using the Circadian Rhythm Inventory, Nordic Musculoskeletal Disorders, and Carlson Work‐Family Conflict questionnaires. Results: The highest prevalence of musculoskeletal disorders was reported in the lower back (68.4%), upper back (65.5%) and shoulders (53.6%), respectively. No significant relation was found between circadian rhythm stability and amplitude, and musculoskeletal disorders prevalence. The nurses who could not overcome drowsiness reported more Work Interference with Family (WIF), Family Interference with Work (FIW) (time‐based) and FIW (strain‐based) compared to the nurses who overcame drowsiness. In addition, the appropriate nurses for shift work experienced less WIF, FIW (behavioural‐based) and WIF (strain‐based) compared to the nurses who could not work overtime or at night. [ABSTRACT FROM AUTHOR]

A new fault diagnosis method for detecting the rotor eccentricity faults including static, dynamic and mixed eccentricity is proposed for brushless doubly‐fed induction machines (BDFIMs). BDFIMs are attractive alternatives for the conventional doubly‐fed induction generator (DFIG) for offshore wind power generation; therefore, paying attention to their fault detection is essential. Existing fault detection methods for conventional induction machines cannot be directly applied to the BDFIM due to its special rotor structure and stator winding configurations as well as complex magnetic field patterns. This article proposes a novel fault detection method based on motor current signal analysis to determine stator current harmonics, induced by the nested‐loop rotor slot harmonics (NRSHs), as fault indices. The analysis is performed under healthy conditions and with different types of rotor eccentricity. Finally, a sensitivity analysis is carried out to confirm the practicability of the proposed technique with various fault intensities and load conditions. Analytical winding function approach, finite element analysis and experimental tests on a prototype D180 BDFIM are used in this study to validate the proposed fault detection technique. [ABSTRACT FROM AUTHOR]

This paper presents a decision‐driven stochastic adaptive‐robust microgrid operation optimization model considering the uncertainties of wind and solar generations, electricity price, and demand as well as the availability uncertainties of microgrid's components. Unlike previous works, this paper utilizes stochastic adaptive‐robust optimization approach to model both continuous and binary uncertainties simultaneously. To do so, adaptive‐robust optimization is used to model the continuous uncertainties, while the binary uncertainties are modelled by means of stochastic programming. An operating dispatchable unit usually exhibits a higher forced outage rate than a de‐committed one. Hence, due to the effect of the optimization decisions on the availability uncertainties, this research work proposes an intrinsic scenario production technique to model these binary uncertainties. In addition, a tri‐level decomposition method is introduced to solve the proposed microgrid operation optimization problem. In this decomposition method, the worst‐case realization of continuous uncertain parameters and unit commitment decisions are determined at each iteration considering the produced scenarios in the previous iteration. Case studies on the IEEE 69‐bus test system exhibit the effectiveness of the proposed decision‐driven stochastic adaptive‐robust model and the proposed solution method. [ABSTRACT FROM AUTHOR]

Once blackouts occur the system operators should re‐energise the affected system in the shortest time. To attain this, restoration plans should be developed beforehand. A deliberate restoration plan considers the supply duration of the cranking power to non‐black‐start units (NBSUs), besides the static and dynamic constraints of the power system. Hence, there should be a method to estimate the restoration duration of NBSUs considering the failure in breakers operating mechanism and the stochastic nature of restoration actions. Accordingly, in this study, generally distributed transition stochastic Petri net is employed to calculate the supply duration of NBSUs, critical loads and the execution time of restoration actions. This is significant because the planners can validate their restoration plans from the NBSUs critical times' point of view or determine energisation time of critical loads. The proposed method has been applied in three test cases, two of these are used for benchmarking, and the other one is a part of Iran bulk power system, which includes a real black‐start test. The results show the effectiveness of the method in estimating the restoration duration. [ABSTRACT FROM AUTHOR]

The Lower Cretaceous siliciclastic fluvial to shallow marine Shurijeh–Shatlyk formations together form one of the main reservoir successions in the Kopeh Dagh–Amu Darya Basin (NE Iran, Turkmenistan, and north of Afghanistan). Sedimentary facies and thickness changes in the Shurijeh–Shatlyk formations show complex variations throughout the basin, which highlight the importance of understanding the controlling factors on facies distribution and depositional setting for future hydrocarbon exploration. Integration of 3D seismic data, 13 boreholes, and five surface stratigraphic sections led to identification of lithofacies and facies associations. The results allow subdivision of this siliciclastic succession into four stratigraphic units (A, B, C, and D). Our study indicates that base‐level changes interacted with palaeotopography inherited from Middle Jurassic basin rifting, Upper Jurassic carbonate reefs/patch reef distributions, and reactivation of the deep basin faults, to control the Shurijeh–Shatlyk depositional setting and sedimentary facies distribution. Our findings show that the Aghdarband and Badkhyz–Maimana palaeo‐highs affected the Kopeh Dagh–Amu Darya Basin throughout deposition of the Shurijeh–Shatlyk formations. Allogeneic processes and active tectonics, related to the Valanginian Late Cimmerian Orogeny, caused a base‐level fall, exposure of Upper Jurassic carbonate sediments, and deposition of a carbonate pebbly conglomerate unit in the western part of the study area. This base‐level fall led to the deposition of thick evaporites in the western area and conglomerate in the eastern parts of the Kopeh Dagh. Due to a Hauterivian sea‐/base‐level rise, several deltas formed in the basin, which form the main reservoir zone in the Murgab Depression and Khangiran Field in Turkmenistan and Iran. [ABSTRACT FROM AUTHOR]

In this study, a combined ON/OFF and conformal mapping method is applied to the permanent magnet shape optimisation of the surface-mounted permanent magnet synchronous motor (SPMSM). The magnet shape has a profound impact on the cogging torque and torque profile of the SPMSM. The proposed method is based on the combination of the conformal mapping and ON/OFF methods, which can reduce computation time significantly as compared with methods that are based on the finite-element method (FEM). For the optimisation process, genetic algorithms are used and applied to three cases. Finally, the FEM is used to verify the magnetic model and characteristics of the optimised machine. [ABSTRACT FROM AUTHOR]

A method for synthesis of high aspect ratio platelet seeds by growth of SrTiO3 on Sr3Ti2O7 core particles is reported. The aim of this study was to identify and control the morphology and size of SrTiO3 particles via molten salt synthesis. Platelet and tabular morphologies with rectangular faces were obtained using rutile and anatase, respectively. Platelet SrTiO3 particles with an edge length of 10–40 μm and a thickness of 1–4 μm were obtained. High aspect ratios (edge length to thickness) of 7–10 were measured for platelet particles as opposed to lower aspect ratios of 2–4 for tabular particles. Highly anisotropic platelets are suitable template candidates to achieve textured ceramics. [ABSTRACT FROM AUTHOR]

A method for synthesis of high aspect ratio platelet seeds by growth of SrTiO3 on Sr3Ti2O7 core particles is reported. The aim of this study was to identify and control the morphology and size of SrTiO3 particles via molten salt synthesis. Platelet and tabular morphologies with rectangular faces were obtained using rutile and anatase, respectively. Platelet SrTiO3 particles with an edge length of 10–40 μm and a thickness of 1–4 μm were obtained. High aspect ratios (edge length to thickness) of 7–10 were measured for platelet particles as opposed to lower aspect ratios of 2–4 for tabular particles. Highly anisotropic platelets are suitable template candidates to achieve textured ceramics. [ABSTRACT FROM AUTHOR]