Search

Bimetallic single–atom catalysts (b–SACs) have recently gained prominence by virtue of the unique catalytic cooperative interactions they can exhibit, intertwining electronic and geometric effects. To date, research efforts have exclusively focused on direct mechanisms such as electron density transfer or sequential reactivity. Herein, the first study on indirect, coordination–induced catalytic synergies in carbon‐supported RuPt SACs is conducted. To this end, a holistic approach is developed, combining i) precision synthesis, ii) advanced characterization, iii) exploration of single–site adsorption properties via the hydrogen evolution reaction, and iv) modeling through density functional theory. Despite the lack of both intermetallic coordination in the first or second shell and charge redistribution effects, the RuPt SACs exhibit a H2 formation rate enhanced up to 15–fold compared with their monometallic counterparts. To unfold the origin of the intermetallic cooperativity, modifications of the structural and catalytic properties induced by the integration of a second metal species are investigated. Thus, Pt atoms are found to selectively occupy the most energeticallyfavorable cavities in the support, prompting Ru atoms to assume a distinct, more active, configuration. This contribution unveils a novel principle of bimetallic cooperativity, demonstrating the key role of integrative experimental and computational analyses in studying b–SACs. [ABSTRACT FROM AUTHOR]

Solar‐driven transfer hydrogenation of unsaturated bonds has received considerable attention in the research area of sustainable organic synthesis; however, water, the ultimate green source of hydrogen, has rarely been investigated due to the high barrier associated with splitting of water molecules. We report a carbon‐nitride‐supported palladium single‐atom heterogeneous catalyst with unparalleled performance in photocatalytic water‐donating transfer hydrogenation compared to its nanoparticle counterparts. Isotopic‐labeling experiments and operando nuclear magnetic resonance measurements confirm the direct hydrogenation mechanism using in situ‐generated protons from water splitting under visible‐light irradiation. Density functional theory calculations attribute the high activity to lower barriers for hydrogenation, facilitated desorption of ethylbenzene, and facile hydrogen replenishment from water on the atomic palladium sites. [ABSTRACT FROM AUTHOR]

Nanostructuring earth‐abundant metals as single atoms or clusters of controlled size on suitable carriers opens new routes to develop high‐performing heterogeneous catalysts, but resolving speciation trends remains challenging. Here, we investigate the potential of low‐nuclearity iron catalysts in the continuous liquid‐phase semi‐hydrogenation of various alkynes. The activity depends on multiple factors, including the nuclearity and ligand sphere of the metal precursor and their evolution upon interaction with the mesoporous graphitic carbon nitride scaffold. Density functional theory predicts the favorable adsorption of the metal precursors on the scaffold without altering the nuclearity and preserving some ligands. Contrary to previous observations for palladium catalysts, single atoms of iron exhibit higher activity than larger clusters. Atomistic simulations suggest a central role of residual carbonyl species in permitting low‐energy paths over these isolated metal centers. [ABSTRACT FROM AUTHOR]

The methoxycarbonylation of anilines stands as an attractive method for the phosgene‐free production of carbamates. Despite the high yields obtained for ceria catalysts, the reduction of the amount of side products and the prevention of catalyst deactivation still represent major hurdles in this chemistry. One advantage of ceria is the possibility of tuning its reactivity by doping its lattice with other metals. In the present work, a series of doped ceria‐based materials, prepared by substitution with metals, are evaluated in the methoxycarbonylation of 2,4‐diaminotoluene with dimethyl carbonate. Among all catalysts, containing Eu, Hf, La, Pr, Sm, Tb, Y or Zr, ceria promoted with 2 mol % Zr exhibited 96 % selectivity towards the desired carbamates, improving the pure CeO2 catalyst. Density functional theory demonstrates that two descriptors are needed: 1) a geometric factor that governs the reduction of energy barriers for carbamate formation through ureas; 2) catalyst basicity as N−H bonds need to be activated. Assessment in subsequent reaction cycles revealed that the CeO2–ZrO2 catalyst is more stable than bulk CeO2, along with the reduction of fouling processes. [ABSTRACT FROM AUTHOR]

The electroreduction of carbon dioxide using renewable electricity is an appealing strategy for the sustainable synthesis of chemicals and fuels. Extensive research has focused on the production of ethylene, ethanol and n‐propanol, but more complex C4 molecules have been scarcely reported. Herein, we report the first direct electroreduction of CO2 to 1‐butanol in alkaline electrolyte on Cu gas diffusion electrodes (Faradaic efficiency=0.056 %, j1‐Butanol=−0.080 mA cm−2 at −0.48 V vs. RHE) and elucidate its formation mechanism. Electrolysis of possible molecular intermediates, coupled with density functional theory, led us to propose that CO2 first electroreduces to acetaldehyde‐a key C2 intermediate to 1‐butanol. Acetaldehyde then undergoes a base‐catalyzed aldol condensation to give crotonaldehyde via electrochemical promotion by the catalyst surface. Crotonaldehyde is subsequently electroreduced to butanal, and then to 1‐butanol. In a broad context, our results point to the relevance of coupling chemical and electrochemical processes for the synthesis of higher molecular weight products from CO2. [ABSTRACT FROM AUTHOR]

The product distribution in direct alkane functionalization by oxyhalogenation strongly depends on the halogen of choice. We demonstrate that the superior selectivity to olefins over an iron phosphate catalyst in oxychlorination is the consequence of a surface‐confined reaction. By contrast, in oxybromination alkane activation follows a gas‐phase radical‐chain mechanism and yields a mixture of alkyl bromide, cracking, and combustion products. Surface‐coverage analysis of the catalyst and identification of gas‐phase radicals in operando mode are correlated to the catalytic performance by a multi‐technique approach, which combines kinetic studies with advanced characterization techniques such as prompt‐gamma activation analysis and photoelectron photoion coincidence spectroscopy. Rationalization of gas‐phase and surface contributions by density functional theory reveals that the molecular level effects of chlorine are pivotal in determining the stark selectivity differences. These results provide strategies for unraveling detailed mechanisms within complex reaction networks. Stuck to the surface: A molecular level understanding of the selectivity control in oxychlorination is achieved by combining kinetic analysis and advanced operando techniques with theoretical modeling. The spectrum of products observed in oxybromination is a consequence of a surface‐confined reaction and radical‐chain pathways governing ethane activation. Key: photoelectron photoion coincidence spectroscopy (PEPICO), prompt‐gamma activation analysis (PGAA). [ABSTRACT FROM AUTHOR]

Indium oxide catalyzes acetylene hydrogenation with high selectivity to ethylene (>85 %); even with a large excess of the alkene. In situ characterization reveals the formation of oxygen vacancies under reaction conditions, while an in depth theoretical analysis links the surface reduction with the creation of well-defined vacancies and surrounding In3O5 ensembles, which are considered responsible for this outstanding catalytic function. This behavior, which differs from that of other common reducible oxides, originates from the presence of four crystallographically inequivalent oxygen sites in the indium oxide surface. These resulting ensembles are 1) stable against deactivation, 2) homogeneously and densely distributed, and 3) spatially isolated and confined against transport; thereby broadening the scope of oxides in hydrogenation catalysis. [ABSTRACT FROM AUTHOR]

Graphitic carbon nitride (g-C3N4) exhibits unique properties as a support for single-atom heterogeneous catalysts (SAHCs). Understanding how the synthesis method, carrier properties, and metal identity impact the isolation of metal centers is essential to guide their design. This study compares the effectiveness of direct and postsynthetic routes to prepare SAHCs by incorporating palladium, silver, iridium, platinum, or gold in g-C3N4 of distinct morphology (bulk, mesoporous and exfoliated). The speciation (single atoms, dimers, clusters, or nanoparticles), distribution, and oxidation state of the supported metals are characterized by multiple techniques including extensive use of aberration-corrected electron microscopy. SAHCs are most readily attained via direct approaches applying copolymerizable metal precursors and employing high surface area carriers. In contrast, although post-synthetic routes enable improved control over the metal loading, nanoparticle formation is more prevalent. Comparison of the carrier morphologies also points toward the involvement of defects in stabilizing single atoms. The distinct metal dispersions are rationalized by density functional theory and kinetic Monte Carlo simulations, highlighting the interplay between the adsorption energetics and diffusion kinetics. Evaluation in the continuous three-phase semihydrogenation of 1-hexyne identifies controlling the metal-carrier interaction and exposing the metal sites at the surface layer as key challenges in designing efficient SAHCs. [ABSTRACT FROM AUTHOR]

We report the preparation and hydrogenation performance of a single-site palladium catalyst that was obtained by the anchoring of Pd atoms into the cavities of mesoporous polymeric graphitic carbon nitride. The characterization of the material confirmed the atomic dispersion of the palladium phase throughout the sample. The catalyst was applied for three-phase hydrogenations of alkynes and nitroarenes in a continuous-flow reactor, showing its high activity and product selectivity in comparison with benchmark catalysts based on nanoparticles. Density functional theory calculations provided fundamental insights into the material structure and attributed the high catalyst activity and selectivity to the facile hydrogen activation and hydrocarbon adsorption on atomically dispersed Pd sites. [ABSTRACT FROM AUTHOR]

Site modification and isolation through selective poisoning comprise an effective strategy to enhance the selectivity of palladium catalysts in the partial hydrogenation of triple bonds in acetylenic compounds. The recent emergence of supported hybrid materials matching the stereo- and chemoselectivity of the classical Lindlar catalyst holds promise to revolutionize palladium-catalyzed hydrogenations, and will benefit from an in-depth understanding of these new materials. In this work, we compare the performance of bare, lead-poisoned, and ligand-modified palladium catalysts in the hydrogenation of diverse alkynes. Catalytic tests, conducted in a continuous-flow three-phase reactor, coupled with theoretical calculations and characterization methods, enable elucidation of the structural origins of the observed selectivity patterns. Distinctions in the catalytic performance are correlated with the relative accessibility of the active site to the organic substrate, and with the adsorption configuration and strength, depending on the ensemble size and surface potentials. This explains the role of the ligand in the colloidally prepared catalysts in promoting superior performance in the hydrogenation of terminal and internal alkynes, and short-chain alkynols. In contrast, the greater accessibility of the active surface of the Pd-Pb alloy and the absence of polar groups are shown to be favorable in the conversion of alkynes containing long aliphatic chains and/or ketone groups. These findings provide detailed insights for the advanced design of supported nanostructured catalysts. [ABSTRACT FROM AUTHOR]

The gas-phase partial hydrogenation of propyne was investigated over supported Ag nanoparticles (2-20 nm in diameter) prepared by using different deposition methods, activation conditions, loadings, and carriers. The excellent selectivities to propene attained over the catalysts, exceeding 90 %, are independent of the particle size but the activity is maximal over approximately 4.5 nm Ag particles. Certain kinetic fingerprints of Ag, such as the positive dependence on the alkyne pressure, the relatively low reaction order in H2, and the low apparent activation energy, deviate from those of conventional hydrogenation metals such as Pd and Ni, questioning the applicability of the classical Horiuti-Polanyi scheme. Periodic dispersion-corrected density functional theory (DFT-D) calculations and microkinetic analysis demonstrate the occurrence of an associative mechanism, which features the activation of H2 on the adsorbed propyne at structural step sites. By using the atomistic Wulff model, the number of B5 sites available on the Ag nanoparticles was estimated to be maximal in the size range of 3.5-4.7 nm. The rate of propene production correlates with the density of B5 sites, which suggests that the latter are potential active centers for the reaction. This alternative pathway broadens the mechanistic diversity of hydrogenation reactions over metal surfaces and opens new directions for understanding metals that do not readily activate H2. [ABSTRACT FROM AUTHOR]

Partial hydrogenation of unsaturated hydrocarbons comprises an important family of reactions that are applied in many industrial sectors. Understanding the hydrogenation of polyunsatured and polyunsaturated compounds on heterogeneous catalysts at its molecular level remains a challenging milestone to fine-tune the product distribution. Our study presents a detailed mechanistic analysis of the gas phase hydrogenation of vinylacetylene (1-butene-3-yne) and valylene (2-methyl-1-butene-3-yne) over palladium and copper catalysts. These two metals are selected owing to their pronounced differences in continuous flow catalytic tests at ambient pressure. The chemoselectivity, regioselectivity, isomerization, and oligomerization patterns measured in a broad range of feed hydrogen/hydrocarbon ratios are rationalized by density functional theory simulations. An extended Brønsted-Evans-Polanyi relationship for both substrates and active metals is found for the hydrogenation processes. The identified factors that govern selectivity are similar to those identified for smaller C2 and C3 compounds and, thus, a means of systematization to other polyunsaturated compounds is opened up. [ABSTRACT FROM AUTHOR]

Heaven can wait. Operando spectroscopy techniques can distinguish surface and gas‐phase processes in alkane oxyhalogenation. In their Communication on page 5877, J. Pérez‐Ramírez et al. unravel the mechanistic origin of the halogen effect steering catalysis. Selective alkane conversion into olefins is driven by surface‐confined chlorine. A colony of bats depicts the unselective gas‐phase radical‐chain mechanism with bromine. An angel views the selectivity control on earth. [ABSTRACT FROM AUTHOR]

In article number 1605785, Javier Pérez‐Ramírez and co‐workers investigate the synthesis of single‐atom heterogeneous catalysts based on precious metals and using graphitic carbon nitride as the carrier. Advanced characterization and simulations reveal the impact of the carrier properties, and of the metal identity and method of introduction on the speciation. Controlling the metal‐carrier interaction and exposing the reactive metal centers are key for maximizing the potential of these materials. [ABSTRACT FROM AUTHOR]

The evolutionary tale of palladium‐based catalysts for selective alkyne hydrogenation, from bare to lead‐alloyed, and, most recently, ligand‐modified nanoparticles, is unlocked using flow chemistry. Distinctions in the performance of each catalyst system as well as accessibility constraints arising from the use of ligands are identified and rationalized. For more details, see the Full Paper by J. Pérez‐Ramírez, N. López et al. on page 5926 ff. [ABSTRACT FROM AUTHOR]