Search

Perovskite solar cells (PSCs) have demonstrated a high power conversion efficiency, however, the large energy loss due to non‐radiative recombination is the main challenge for further performance enhancement. Here, a surface treatment strategy is developed by heat‐induced decomposition of a thin interlayer 2,7‐Naphthaleneditriflate (NAP) to in situ reconstruct perovskite energetics. It is verified that the reconstructed perovskite surface energetics match better with the upper hole transport layer compared to the intrinsic condition. Spontaneous generation of n/n− homojunctions between the perovskite film bulk and the surface region promotes hole extraction, enhancing built‐in electric field, and thus significantly suppresses charge recombination at such perovskite hole‐selective heterojunctions. Moreover, the surface decomposed fluorine‐rich complexes passivate the defects and improve the crystallinity of the perovskite film. These advantages are confirmed by a remarkably improved efficiency from 20.52% for the control device to 23.37% for the treated one with excellent stability. The work provides a promising approach of in situ reconstructing perovskite surface and interface for the design of highly efficient and stable PSCs. [ABSTRACT FROM AUTHOR]

Perovskite solar cells (PSCs) suffer from significant nonradiative recombination at perovskite/charge transport layer heterojunction, seriously limiting their power conversion efficiencies. Herein, solution‐processed chromium multioxide (CrOx) is judiciously selected to construct a MAPbI3/CrOx/Spiro‐OMeTAD hole‐selective heterojunction. It is demonstrated that the inserted CrOx not only effectively reduces defect sites via redox shuttle at perovskite contact, but also decreases valence band maximum (VBM)‐HOMO offset between perovskite and Spiro‐OMeTAD. This will diminish thermionic losses for collecting holes and thus promote charge transport across the heterojunction, suppressing both defect‐assisted recombination and interface carrier recombination. As a result, a remarkable improvement of 21.21% efficiency with excellent device stability is achieved compared to 18.46% of the control device, which is among the highest efficiencies for polycrystalline MAPbI3 based n–i–p planar PSCs reported to date. These findings of this work provide new insights into novel charge‐selective heterojunctions for further enhancing efficiency and stability of PSCs. [ABSTRACT FROM AUTHOR]

Defect passivation via additive and energetic modification via interface engineering are two effective strategies for achieving high‐performance perovskite solar cells (PSCs). Here, the synergies of pentafluorophenyl acrylate when used as additive, in which it not only passivates surface defect states but also simultaneously modifies the energetics at the perovskite/Spiro‐OMeTAD interface to promote charge transport, are shown. The additive‐induced synergy effect significantly suppresses both defect‐assisted recombination and interface carrier recombination, resulting in a device efficiency of 22.42% and an open‐circuit voltage of 1.193 V with excellent device stability. The two photovoltaic parameters are among the highest values for polycrystalline CsFormamidinium/Methylammonium (FAMA)/FAMA based n‐i‐p structural PSCs using low‐cost silver electrodes reported to date. The findings provide a promising approach by choosing the dual functional additive to enhance efficiency and stability of PSCs. [ABSTRACT FROM AUTHOR]

Defect passivation via additive and energetic modification via interface engineering are two effective strategies for achieving high‐performance perovskite solar cells (PSCs). Here, the synergies of pentafluorophenyl acrylate when used as additive, in which it not only passivates surface defect states but also simultaneously modifies the energetics at the perovskite/Spiro‐OMeTAD interface to promote charge transport, are shown. The additive‐induced synergy effect significantly suppresses both defect‐assisted recombination and interface carrier recombination, resulting in a device efficiency of 22.42% and an open‐circuit voltage of 1.193 V with excellent device stability. The two photovoltaic parameters are among the highest values for polycrystalline CsFormamidinium/Methylammonium (FAMA)/FAMA based n‐i‐p structural PSCs using low‐cost silver electrodes reported to date. The findings provide a promising approach by choosing the dual functional additive to enhance efficiency and stability of PSCs. [ABSTRACT FROM AUTHOR]

The cathode interface plays a critical role in achieving high‐performance fullerene/perovskite planar solar cells. Herein, the simple molecule Isatin and its derivatives are introduced at the back contact [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM)/Al as a cathode modification interlayer. It is revealed that the Isatin interlayers facilitate electron transport/extraction and suppress electron recombination, attributed to the formation of negative dipole potential steps and the passivation of the interfacial trap density. The average power conversion efficiencies of the resulting devices are significantly improved by 11% from 17.68% to 19.74%, with an enhancement in all device parameters including short‐circuit current, open‐circuit voltage, and fill factor. The hysteresis index is found to disappear. In addition, such interlayer enhances device stability under ambient conditions compared to the control devices due to suppression of moisture‐induced degradation of the perovskite films. These findings provide a comprehensive understanding of the engineering of the back contact between PCBM and the metal electrode to improve efficiency and stability of perovskite solar cells. [ABSTRACT FROM AUTHOR]

The cationic compositional engineered perovskites undergo severe degradation under illumination in ultrahigh vacuum (UHV) environment. As shown by Jianxin Tang, Qinye Bao and co‐workers in article number 1800262, UHV environment remarkably accelerates the degradation, which delivers the important message that current hybrid perovskite materials and their optoelectronic devices are not suitable for application in outer space (e.g. satellites and probes). [ABSTRACT FROM AUTHOR]

Organometal halide perovskites exhibit a bright future for applications in solar cells, as efficiency has achieved over 22%. The long‐term stability remains a major obstacle for commercialization. Here, it is found that three cationic compositional engineered perovskites, MAPb(I0.83Br0.17)3, FA0.83MA0.17Pb(I0.83Br0.17)3, and Cs0.1(FA0.83MA0.17)0.9Pb(I0.83Br0.17)3, undergo severe degradation under white‐light illumination in ultrahigh vacuum (UHV) environment, but the rate of degradation is significantly lower for the mixed cation perovskites. This is attributed to the defect‐induced trap states that trigger the strong coupling between the photoexcited carriers and the crystal lattice. The observed behavior supports the view of the mixed cations suppressing the photoinduced degradation. It is further demonstrated that UHV environment remarkably accelerates the degradation of the perovskite films under illumination, which delivers a very important message that the current hybrid perovskite materials and their optoelectronic devices are not suitable for application in outer space. Moreover, the applied UHV environment can be an accelerated test method to estimate the photostability of the perovskites. Photostability of mixed cation perovskite films in extreme environment is unraveled through ultrahigh vacuum (UHV) environment that simulates outer space. UHV remarkably accelerates the degradation of the perovskite films under white illumination, and it can be used as an accelerated test method to estimate the photostability of perovskites. [ABSTRACT FROM AUTHOR]