Search

The use of ethane as a platform molecule for the manufacture of polyvinyl chloride (PVC) is a longstanding challenge, which would allow to reduce the raw material costs and CO2 emissions to produce this plastic. Herein, we discover that rare earth oxychlorides catalyze in a selective (up to 90 %) and stable (>50 h on stream) manner the reaction of ethane and molecular chlorine into 1,2‐dichloroethane, which, upon established cracking, will translate into an order of magnitude higher vinyl chloride productivity compared to ethane oxychlorination technologies. In addition, representative europium oxychloride was supported on suitable carriers and was demonstrated to be selective (up to 90 %) and stable (>40 h on stream) in extrudate form. These findings bring the ethane‐based production of PVC one step closer to implementation. [ABSTRACT FROM AUTHOR]

The use of ethane as a platform molecule for the manufacture of polyvinyl chloride (PVC) is a longstanding challenge, which would allow to reduce the raw material costs and CO2 emissions to produce this plastic. Herein, we discover that rare earth oxychlorides catalyze in a selective (up to 90 %) and stable (>50 h on stream) manner the reaction of ethane and molecular chlorine into 1,2‐dichloroethane, which, upon established cracking, will translate into an order of magnitude higher vinyl chloride productivity compared to ethane oxychlorination technologies. In addition, representative europium oxychloride was supported on suitable carriers and was demonstrated to be selective (up to 90 %) and stable (>40 h on stream) in extrudate form. These findings bring the ethane‐based production of PVC one step closer to implementation. [ABSTRACT FROM AUTHOR]

An interview with Javier Pérez-Ramírez, full professor of catalysis engineering at ETH Zurich in Switzerland, is presented. Topics discussed include the main challenges for the future of catalytic materials, his thoughts about catalysis digitalization, and development of science and technology needed to obtain catalytic materials from feedstocks on which people can rely forever with zero environmental impact.

Back Cover: Ethane-Based Catalytic Process for Vinyl Chloride Manufacture (Angew. Catalytic ethane chlorination, ethylene dichloride, natural gas, polyvinyl chloride, rare-earth oxychlorides Keywords: catalytic ethane chlorination; ethylene dichloride; natural gas; polyvinyl chloride; rare-earth oxychlorides EN catalytic ethane chlorination ethylene dichloride natural gas polyvinyl chloride rare-earth oxychlorides 24332 24332 1 10/27/21 20211102 NES 211102 B Gas-to-PVC b In their Research Article on page 24162, Guido Zichittella and Javier Pérez-Ramírez show the outstanding performance of rare earth oxychloride catalysts for the selective conversion of ethane into 1,2-dichloroethane, a precursor of vinyl chloride monomer. [Extracted from the article]

Rücktitelbild: Ethane-Based Catalytic Process for Vinyl Chloride Manufacture (Angew. Catalytic ethane chlorination, ethylene dichloride, natural gas, polyvinyl chloride, rare-earth oxychlorides Keywords: catalytic ethane chlorination; ethylene dichloride; natural gas; polyvinyl chloride; rare-earth oxychlorides EN catalytic ethane chlorination ethylene dichloride natural gas polyvinyl chloride rare-earth oxychlorides 24536 24536 1 10/27/21 20211102 NES 211102 B Gas-to-PVC b Im Forschungsartikel auf S. 24291 berichten Guido Zichittella und Javier Pérez-Ramírez über die herausragende Aktivität von Seltenerd-Oxychlorid-Katalysatoren für die selektive Umwandlung von Ethan in 1,2-Dichlorethan, einen Vorläufer des Vinylchlorid-Monomers. [Extracted from the article]

We report the synthesis of HKUST-1 (Cu3(btc)2; btc=benzene-1,3,5-tricarboxylate) and its growth kinetics by dynamic light scattering completely at room temperature without prior nucleation-induction steps. Upon an increase in concentration of the starting solutions, the generation of a pure phase requires adjustment of the H2O/EtOH ratio. The presence of DMF is important to avoid competitive side phases. Replacement of DMF by a minimal amount of diethylamine resulted in the instantaneous formation of pure HKUST-1 upon mixing at room temperature. Additionally, the synthesis parameters strongly influence the final crystallite size and porous properties. [ABSTRACT FROM AUTHOR]

The article discusses the first large-scale preparation of hierarchically structured zeolite catalysts aimed at reproducibly introducing extensive intracrystalline mesoporosity into ZSM-5. Controlled silicon extraction in alkaline medium was done on a zeolite at laboratory, middle and pilot scales. It cites the successful demonstration of a large-scale preparation of hierarchical zeolites which clearly established the robustness of the desilication route.

Chemistry, a vital tool for sustainable development, faces a challenge due to the lack of clear guidance on actionable steps, hindering the optimal adoption of sustainability practices across its diverse facets from discovery to implementation. This Scientific Perspective explores established frameworks and principles, proposing a conciliated set of triple E priorities anchored on Environmental, Economic, and Equity pillars for research and decision making. We outline associated metrics, crucial for quantifying impacts, classifying them according to their focus areas and scales tackled. Emphasizing catalysis as a key driver of sustainable synthesis of chemicals and materials, we exemplify how triple E priorities can practically guide the development and implementation of processes from renewables conversions to complex customized products. We summarize by proposing a roadmap for the community aimed at raising awareness, fostering academia–industry collaboration, and stimulating further advances in sustainable chemical technologies across their broad scope. [ABSTRACT FROM AUTHOR]

Chemistry, a vital tool for sustainable development, faces a challenge due to the lack of clear guidance on actionable steps, hindering the optimal adoption of sustainability practices across its diverse facets from discovery to implementation. This Scientific Perspective explores established frameworks and principles, proposing a conciliated set of triple E priorities anchored on Environmental, Economic, and Equity pillars for research and decision making. We outline associated metrics, crucial for quantifying impacts, classifying them according to their focus areas and scales tackled. Emphasizing catalysis as a key driver of sustainable synthesis of chemicals and materials, we exemplify how triple E priorities can practically guide the development and implementation of processes from renewables conversions to complex customized products. We summarize by proposing a roadmap for the community aimed at raising awareness, fostering academia–industry collaboration, and stimulating further advances in sustainable chemical technologies across their broad scope. [ABSTRACT FROM AUTHOR]

Single‐atom heterogeneous catalysts (SACs) hold promise as sustainable alternatives to metal complexes in organic transformations. However, their working structure and dynamics remain poorly understood, hindering advances in their design. Exploiting the unique features of droplet‐based microfluidics, we present the first in‐situ assessment of a palladium SAC based on exfoliated carbon nitride in Suzuki–Miyaura cross‐coupling using X‐ray absorption spectroscopy. Our results confirm a surface‐catalyzed mechanism, revealing the distinct electronic structure of active Pd centers compared to homogeneous systems, and providing insights into the stabilizing role of ligands and bases. This study establishes a valuable framework for advancing mechanistic understanding of organic syntheses catalyzed by SACs. [ABSTRACT FROM AUTHOR]

Single‐atom heterogeneous catalysts (SACs) hold promise as sustainable alternatives to metal complexes in organic transformations. However, their working structure and dynamics remain poorly understood, hindering advances in their design. Exploiting the unique features of droplet‐based microfluidics, we present the first in‐situ assessment of a palladium SAC based on exfoliated carbon nitride in Suzuki–Miyaura cross‐coupling using X‐ray absorption spectroscopy. Our results confirm a surface‐catalyzed mechanism, revealing the distinct electronic structure of active Pd centers compared to homogeneous systems, and providing insights into the stabilizing role of ligands and bases. This study establishes a valuable framework for advancing mechanistic understanding of organic syntheses catalyzed by SACs. [ABSTRACT FROM AUTHOR]

C1 coupling reactions over zeolite catalysts are central to sustainable chemical production strategies. However, questions persist regarding the involvement of CO in ketene formation, and the impact of this elusive oxygenate intermediate on reactivity patterns. Using operando photoelectron photoion coincidence spectroscopy (PEPICO), we investigate the role of CO in methyl chloride conversion to hydrocarbons (MCTH), a prospective process for methane valorization with a reaction network akin to methanol to hydrocarbons (MTH) but without oxygenate intermediates. Our findings reveal the transformative role of CO in MCTH at the low pressures, inducing ketene formation in MCTH and boosting olefin production, confirming the Koch carbonylation step in the initial stages of C1 coupling. We uncover pressure‐dependent product distributions driven by CO‐induced ketene formation, and its subsequent desorption from the zeolite surface, which is enhanced at low pressure. Inspired by the above results, extension of the co‐feeding approach to CH3OH as another simple oxygenate showcases the additional potential for improved catalyst stability in MCTH at ambient pressure. [ABSTRACT FROM AUTHOR]

C1 coupling reactions over zeolite catalysts are central to sustainable chemical production strategies. However, questions persist regarding the involvement of CO in ketene formation, and the impact of this elusive oxygenate intermediate on reactivity patterns. Using operando photoelectron photoion coincidence spectroscopy (PEPICO), we investigate the role of CO in methyl chloride conversion to hydrocarbons (MCTH), a prospective process for methane valorization with a reaction network akin to methanol to hydrocarbons (MTH) but without oxygenate intermediates. Our findings reveal the transformative role of CO in MCTH at the low pressures, inducing ketene formation in MCTH and boosting olefin production, confirming the Koch carbonylation step in the initial stages of C1 coupling. We uncover pressure‐dependent product distributions driven by CO‐induced ketene formation, and its subsequent desorption from the zeolite surface, which is enhanced at low pressure. Inspired by the above results, extension of the co‐feeding approach to CH3OH as another simple oxygenate showcases the additional potential for improved catalyst stability in MCTH at ambient pressure. [ABSTRACT FROM AUTHOR]

Catalytic hydrogenolysis has the potential to convert high‐density polyethylene (HDPE), which comprises about 30 % of plastic waste, into valuable alkanes. Most investigations have focused on increasing activity for lab grade HDPEs displaying low molecular weight, with limited mechanistic understanding of the product distribution. No efficient catalyst is available for consumer grades due to their lower reactivity. This study targets HDPE used in bottle caps, a waste form generated globally at a rate of approximately one million units per hour. Ultrafine ruthenium particles (1 nm) supported on titania (anatase) achieved up to 80 % conversion into light alkanes (C1−C45) under mild conditions (498 K, 20 bar H2, 4 h) and were reused for three cycles. Small ruthenium nanoparticles were critical to achieving relevant conversions, as activity sharply decreased with particle size. Selectivity commonalities and peculiarities across HDPE grades were disclosed by a reaction modelling approach applied to products. Isomerization cedes to backbone scission as the reaction progresses. Within this trend, low molecular weight favor isomerization whilst high molecular weight favor cleavage. Commercial caps obeyed this trend with decreased activity, anticipating the influence of additives in realistic processing. This study demonstrates effective hydrogenolysis of consumer grade polyethylene and provides selectivity patterns for product control. [ABSTRACT FROM AUTHOR]

Catalytic hydrogenolysis has the potential to convert high‐density polyethylene (HDPE), which comprises about 30 % of plastic waste, into valuable alkanes. Most investigations have focused on increasing activity for lab grade HDPEs displaying low molecular weight, with limited mechanistic understanding of the product distribution. No efficient catalyst is available for consumer grades due to their lower reactivity. This study targets HDPE used in bottle caps, a waste form generated globally at a rate of approximately one million units per hour. Ultrafine ruthenium particles (1 nm) supported on titania (anatase) achieved up to 80 % conversion into light alkanes (C1−C45) under mild conditions (498 K, 20 bar H2, 4 h) and were reused for three cycles. Small ruthenium nanoparticles were critical to achieving relevant conversions, as activity sharply decreased with particle size. Selectivity commonalities and peculiarities across HDPE grades were disclosed by a reaction modelling approach applied to products. Isomerization cedes to backbone scission as the reaction progresses. Within this trend, low molecular weight favor isomerization whilst high molecular weight favor cleavage. Commercial caps obeyed this trend with decreased activity, anticipating the influence of additives in realistic processing. This study demonstrates effective hydrogenolysis of consumer grade polyethylene and provides selectivity patterns for product control. [ABSTRACT FROM AUTHOR]

Ternäre Pd‐In2O3/ZrO2 Katalysatoren beweisen technologisches Potenzial für die CO2‐basierte Methanolsynthese, wobei die Entwicklung skalierbarer Systeme und das Verständnis komplexer dynamischer Wechselwirkungen zwischen der aktiven Phase, des Promotors und des Trägers der Schlüssel zur Erreichung einer hohen Produktivität sind. Hier zeigen wir, dass durch einfache Imprägnierung hergestellte Pd‐In2O3/ZrO2 Katalysatoren unter CO2‐Hydrierbedingungen eine stabile und selektive Nanoarchitektur bilden, unabhängig von der Reihenfolge der Zugabe von Pd‐ und In‐Komponenten auf den Zirkonoxidträger. Detaillierte operando Charakterisierung und Simulationen deuten auf eine schnelle Umstrukturierung, dessen Treiber die Energie der Metall‐Metalloxid‐Wechselwirkung ist. Die Nähe von InOx‐Schichten auf den entstehenden InPdx‐Partikeln verhindern Leistungsverluste durch Pd‐Sinterung. Weiterhin unterstreichen die Ergebnisse die entscheidende Rolle der reaktionsinduzierten Umstrukturierung in komplexem CO2‐Hydrierkatalysatoren und bieten Einblicke in die optimale Integration von Säure‐Base‐ und Redoxfunktionen für die technische Umsetzung. [ABSTRACT FROM AUTHOR]

Ternary Pd‐In2O3/ZrO2 catalysts exhibit technological potential for CO2‐based methanol synthesis, but developing scalable systems and comprehending complex dynamic behaviors of the active phase, promoter, and carrier are key for achieving high productivity. Here, we show that the structure of Pd‐In2O3/ZrO2 systems prepared by wet impregnation evolves under CO2 hydrogenation conditions into a selective and stable architecture, independent of the order of addition of Pd and In phases on the zirconia carrier. Detailed operando characterization and simulations reveal a rapid restructuring driven by the metal‐metal oxide interaction energetics. The proximity of InPdx alloy particles decorated by InOx layers in the resulting architecture prevents performance losses associated with Pd sintering. The findings highlight the crucial role of reaction‐induced restructuring in complex CO2 hydrogenation catalysts and offer insights into the optimal integration of acid‐base and redox functions for practical implementation. [ABSTRACT FROM AUTHOR]

The article reviews the book "Design and Applications of Single-Site Heterogeneous Catalysts: Contribution to Green Chemistry, Clean Technology and Sustainability," by John Meurig Thomas.

Single‐atom heterogeneous catalysts (SACs) attached to carefully chosen hosts are attracting considerable interest; principally because they offer maximum utilization per metal atom and are usually readily recyclable. However, diminution of the atomic population of nanoparticles or nanoclusters to single atoms can significantly alter reactivity because of the consequent changes in the active‐site structure. By examining various diverse applications, we ascertain whether the performance of SACs is enhanced or suppressed. We also note that SACs generally display unique kinds of catalytic cycles. The choice of host is crucial since it influences both the electronic and steric environment of the metal center. Moreover, it may function as a cocatalyst. All these aspects impact upon the design of new SACs, which exhibit similarities to hetero‐ and homogeneous predecessors. Additionally, SACs offer a viable replacement of soluble metal complexes in processes that remain difficult to heterogenize. Breaking with tradition: The performance of single‐atom heterogeneous catalysts (SACs) is reviewed and discussed in detail. Key factors that influence performance are described and compared to heterogeneous and homogeneous analogues comprising supported nanoparticles/clusters or metal complexes. SACs follow distinct catalytic cycles in many of the examples described. [ABSTRACT FROM AUTHOR]

Heterogene Einzelatom‐Katalysatoren (single‐atom heterogeneous catalysts, SACs) finden aufgrund ihrer maximalen Reaktivität pro Metallatom und der einfachen Wiederverwendbarkeit großen Anklang in der akademischen Welt. Jedoch führt der Weg von Nanopartikeln oder Metallclustern zu schließlich einzeln isolierten Atomen zwangsläufig zu Veränderungen in der Reaktivität der Katalysatoren, da die physikalische Struktur der aktiven Zentren verändert wird. Hier bewerten wir durch den Vergleich verschiedenster Anwendungen, ob die katalytische Leistungsfähigkeit durch die Verwendung von SACs verbessert oder verschlechtert wird. Zudem stellen wir fest, dass SACs im Allgemeinen einzigartige katalytische Zyklen aufweisen. Die Wahl des Trägermaterials ist maßgebend, da dieses sowohl die elektronischen als auch die sterischen Eigenschaften des Metallzentrums beeinflusst. Außerdem kann der Träger auch als Cokatalysator wirken. Für die Entwicklung neuer SACs, welche die begehrenswerten Eigenschaften ihrer homogenen oder heterogenen Vorgänger vereinen können, müssen all diese Aspekte berücksichtigt werden. Schließlich könnten SACs auch homogene Metallkomplexe in katalytischen Anwendungen ersetzen, bei denen sich die Heterogenisierung als besonders schwierig erweist. Bruch mit der Tradition: Unter Betrachtung der katalytischen Leistung in Reaktionen, die mit heterogenen Einzelatom‐Katalysatoren (SACs) durchgeführt wurden, diskutiert dieser Kurzaufsatz die entscheidenden Faktoren, die zu besserer oder schlechterer Performance verglichen mit heterogenen Metall‐Nanopartikel/Cluster‐Katalysatoren oder homogenen Metallkomplex‐Katalysatoren führen. Es wird gezeigt, dass SACs fast immer einzigartige katalytische Zyklen aufweisen. [ABSTRACT FROM AUTHOR]

Mixed zinc‐zirconium oxides, ZnZrOx, are highly selective and stable catalysts for CO2 hydrogenation to methanol, a pivotal energy vector. However, their activity remains moderate, and descriptors to design improved systems are lacking. This work applies flame spray pyrolysis (FSP), a one‐step and scalable method, to synthesize a series of ZnZrOx catalysts, and systematically compares them to coprecipitated (CP) analogs to establish deeper synthesis–structure–performance relationships. FSP systems (up to 5 mol%) generally display a threefold higher methanol productivity compared to their CP counterparts. In‐depth characterization and theoretical simulations show that, unlike CP, FSP maximizes the surface area and formation of atomically dispersed Zn2+ sites incorporated in lattice positions within the ZrO2 surface, which is key to improving performance. Analysis by in situ electron paramagnetic resonance (EPR) spectroscopy reveals that the specific architecture of the flame‐made catalyst markedly fosters the generation of oxygen vacancies. Together with surrounding Zn and Zr‐O atoms, the oxygen vacancies create active ensembles that favor methanol formation through the formate path while suppressing undesired CO production, as confirmed by kinetic modeling. This study elucidates the nature of active sites and their working mechanism, pushing forward ZnZrOx‐catalyzed methanol synthesis by providing a new benchmark for this cost‐effective and earth‐abundant catalyst family. [ABSTRACT FROM AUTHOR]

Bimetallic single–atom catalysts (b–SACs) have recently gained prominence by virtue of the unique catalytic cooperative interactions they can exhibit, intertwining electronic and geometric effects. To date, research efforts have exclusively focused on direct mechanisms such as electron density transfer or sequential reactivity. Herein, the first study on indirect, coordination–induced catalytic synergies in carbon‐supported RuPt SACs is conducted. To this end, a holistic approach is developed, combining i) precision synthesis, ii) advanced characterization, iii) exploration of single–site adsorption properties via the hydrogen evolution reaction, and iv) modeling through density functional theory. Despite the lack of both intermetallic coordination in the first or second shell and charge redistribution effects, the RuPt SACs exhibit a H2 formation rate enhanced up to 15–fold compared with their monometallic counterparts. To unfold the origin of the intermetallic cooperativity, modifications of the structural and catalytic properties induced by the integration of a second metal species are investigated. Thus, Pt atoms are found to selectively occupy the most energeticallyfavorable cavities in the support, prompting Ru atoms to assume a distinct, more active, configuration. This contribution unveils a novel principle of bimetallic cooperativity, demonstrating the key role of integrative experimental and computational analyses in studying b–SACs. [ABSTRACT FROM AUTHOR]

Solar‐driven transfer hydrogenation of unsaturated bonds has received considerable attention in the research area of sustainable organic synthesis; however, water, the ultimate green source of hydrogen, has rarely been investigated due to the high barrier associated with splitting of water molecules. We report a carbon‐nitride‐supported palladium single‐atom heterogeneous catalyst with unparalleled performance in photocatalytic water‐donating transfer hydrogenation compared to its nanoparticle counterparts. Isotopic‐labeling experiments and operando nuclear magnetic resonance measurements confirm the direct hydrogenation mechanism using in situ‐generated protons from water splitting under visible‐light irradiation. Density functional theory calculations attribute the high activity to lower barriers for hydrogenation, facilitated desorption of ethylbenzene, and facile hydrogen replenishment from water on the atomic palladium sites. [ABSTRACT FROM AUTHOR]

Solar‐driven transfer hydrogenation of unsaturated bonds has received considerable attention in the research area of sustainable organic synthesis; however, water, the ultimate green source of hydrogen, has rarely been investigated due to the high barrier associated with splitting of water molecules. We report a carbon‐nitride‐supported palladium single‐atom heterogeneous catalyst with unparalleled performance in photocatalytic water‐donating transfer hydrogenation compared to its nanoparticle counterparts. Isotopic‐labeling experiments and operando nuclear magnetic resonance measurements confirm the direct hydrogenation mechanism using in situ‐generated protons from water splitting under visible‐light irradiation. Density functional theory calculations attribute the high activity to lower barriers for hydrogenation, facilitated desorption of ethylbenzene, and facile hydrogen replenishment from water on the atomic palladium sites. [ABSTRACT FROM AUTHOR]

Porous MnO2 microspheres distributed around magnetic carbon-coated cobalt nanoparticles were developed. The performance of these nanoparticles rivals that of Pd-based catalysts for the selective oxidation of alcohols. Excellent recyclability was conveniently achieved by magnetic decantation and is demonstrated in ten consecutive cycles with no apparent material or performance losses. [ABSTRACT FROM AUTHOR]

Chemistry is vital for society , but its practices must align with sustainable development. While attention often focuses on individual pillars—environment, economy, or equity—true sustainability requires alignment across all three. The cover image depicts a sustainability compass, symbolizing the integration of diverse principles into a unified set of triple E priorities proposed by Javier Pérez‐Ramírez et al. in their Scientific Perspective (e202318676) to guide efforts in the chemical sciences...By Sharon Mitchell; Antonio J. Martín; Gonzalo Guillén‐Gosálbez and Javier Pérez‐RamírezReported by Author; Author; Author; Author [Extracted from the article]

Chemistry is vital for society , but its practices must align with sustainable development. While attention often focuses on individual pillars—environment, economy, or equity—true sustainability requires alignment across all three. The cover image depicts a sustainability compass, symbolizing the integration of diverse principles into a unified set of triple E priorities proposed by Javier Pérez‐Ramírez et al. in their Scientific Perspective (e202318676) to guide efforts in the chemical sciences...By Sharon Mitchell; Antonio J. Martín; Gonzalo Guillén‐Gosálbez and Javier Pérez‐RamírezReported by Author; Author; Author; Author [Extracted from the article]

The article titled "Titelbild: Droplet-Based Microfluidics Reveals Insights into Cross-Coupling Mechanisms over Single-Atom Heterogeneous Catalysts" discusses the development of in-situ characterization tools for heterogeneous catalysts in organic syntheses. The authors, Andrew J. deMello, Javier Pérez-Ramírez, Sharon Mitchell, and their colleagues, demonstrate the use of an innovative in-situ X-ray absorption spectroscopy approach using droplet-based microfluidics to study palladium single-atom catalysts in Suzuki-Miyaura coupling. The results of their study highlight the feasibility of this technique and its potential to provide new mechanistic insights. Additionally, the article mentions another research article by Shungui Zhou, Yujie Xiong, and their colleagues, which reports on the discovery of non-Fenton-type reactive oxygen species driving abiotic CH4 production, offering a new approach for engineering CH4 production. [Extracted from the article]

The article discusses the importance of developing improved in-situ characterization tools for designing heterogeneous catalysts for organic syntheses. The authors present an innovative in-situ X-ray absorption spectroscopy approach using droplet-based microfluidics to study palladium single-atom catalysts in Suzuki-Miyaura coupling. The results demonstrate the feasibility of the technique and its potential to provide new mechanistic insights. Additionally, another research article by different authors explores the discovery of non-Fenton-type reactive oxygen species driving abiotic CH4 production, offering a new approach for engineering CH4 production. [Extracted from the article]

The production of nitrous oxide, N2O, via NH3 oxidation is not on a practical scale due to the lack of a suitable catalyst. Instead, it is produced via thermal decomposition of NH4NO3, rendering N2O too costly and limiting its prospective uses. Herein, we report CeO2‐supported Au nanoparticles (2–3 nm) as a highly selective catalyst for low‐temperature NH3 oxidation to N2O, exhibiting two orders of magnitude higher space–time yield than the state‐of‐the‐art Mn−Bi/α‐Al2O3 and remarkable stability over 70 h on stream. The reaction proceeds via a Mars–van Krevelen mechanism, with the density of interfacial Auδ+ species and the oxygen storage capacity of CeO2 identified as the key performance descriptors. The latter could be enhanced by cobalt doping, improving the catalytic activity and setting a new benchmark for N2O productivity. These findings establish NH3 oxidation as an efficient process for N2O manufacture and facilitate its broader utilization in selective oxidations. [ABSTRACT FROM AUTHOR]

The production of nitrous oxide, N2O, via NH3 oxidation is not on a practical scale due to the lack of a suitable catalyst. Instead, it is produced via thermal decomposition of NH4NO3, rendering N2O too costly and limiting its prospective uses. Herein, we report CeO2‐supported Au nanoparticles (2–3 nm) as a highly selective catalyst for low‐temperature NH3 oxidation to N2O, exhibiting two orders of magnitude higher space–time yield than the state‐of‐the‐art Mn−Bi/α‐Al2O3 and remarkable stability over 70 h on stream. The reaction proceeds via a Mars–van Krevelen mechanism, with the density of interfacial Auδ+ species and the oxygen storage capacity of CeO2 identified as the key performance descriptors. The latter could be enhanced by cobalt doping, improving the catalytic activity and setting a new benchmark for N2O productivity. These findings establish NH3 oxidation as an efficient process for N2O manufacture and facilitate its broader utilization in selective oxidations. [ABSTRACT FROM AUTHOR]

Without techniques sensitive to complex pore architectures, synthetic efforts to enhance molecular transport in zeolite and other porous materials through hierarchical structuring lack descriptors for their rational design. The power of positron annihilation lifetime spectroscopy (PALS) to characterize the pore connectivity in hierarchical MFI zeolites is demonstrated, establishing a direct link with the enhanced catalyst lifetime in the conversion of methanol to valuable hydrocarbons. The unique ability to capture subtleties of the hierarchical structure originates from the dynamic nature of the ortho-positronium response to the pore network. The findings reveal the strong dependence on the way in which the hierarchical zeolites are manufactured, having direct implications for the practical realization of these advanced catalysts. [ABSTRACT FROM AUTHOR]

A plethora of metal promoters have been applied to enhance the performance of In2O3 in CO2 hydrogenation to methanol, a prospective energy carrier. However, the lack of systematic catalyst preparation and evaluation precludes a direct comparison of their speciation and promotional effects, and consequently, the design of an optimal system. Herein, flame spray pyrolysis (FSP) is employed as a standardized synthesis method to introduce nine metal promoters (0.5 wt.%) into In2O3. Methanol productivity generally increased on M‐In2O3 with selectivity following Pd ≈ Pt > Rh ≈ Ru ≈ Ir > Ni ≈ Co > Ag ≈ In2O3 > Au. In‐depth characterization, kinetic analyses, and theoretical calculations reveal a range of metal‐dependent speciation which dictate catalyst architecture and degree of promotion. Atomically‐dispersed promoters (Pd, Pt, Rh, Ru, and Ir) grant the highest improvement in performance, particularly Pd and Pt, which markedly promote hydrogen activation while hindering undesired CO formation. In contrast, metals in clustered (Ni and Co) and nanoparticle (Ag and Au) forms display moderate and no promotion, respectively. This study provides an atomic‐level understanding of In2O3 promotion based on a unified protocol, and highlights the potential of FSP to engineer complex catalytic systems toward more efficient energy transformations. [ABSTRACT FROM AUTHOR]

The article titled "Consumer Grade Polyethylene Recycling via Hydrogenolysis on Ultrafine Supported Ruthenium Nanoparticles" published in Angewandte Chemie discusses the development of catalysts for the chemical recycling of high-density polyethylene. The researchers, led by Javier Pérez-Ramírez, found that 1-nm ruthenium particles supported on titania can effectively catalyze the hydrogenolysis of plastic caps used in soft drinks, converting them into C1-C45 alkanes. The study also examines the impact of common additives on the catalytic process. The authors of the article are Shibashish D. Jaydev, Antonio J. Martín, Marc-Eduard Usteri, Katia Chikri, Henrik Eliasson, Rolf Erni, and Javier Pérez-Ramírez. [Extracted from the article]

The article titled "Back Cover: Consumer Grade Polyethylene Recycling via Hydrogenolysis on Ultrafine Supported Ruthenium Nanoparticles" discusses the development of catalysts for the chemical recycling of high-density polyethylene. The researchers, led by Javier Pérez-Ramírez, found that 1-nm ruthenium particles supported on titania can effectively catalyze the hydrogenolysis of plastic caps used in soft drinks, converting them into C1-C45 alkanes. The study also examines the impact of common additives on the catalytic process. The authors provide valuable insights into the mechanistic routes and deactivation pathways involved in the recycling process. [Extracted from the article]

Catalysts based on individual precious metals on carbon‐ and oxide‐based carriers have shown remarkably selective behavior in the hydrodebromination of CH2Br2 to CH3Br, an important transformation within halogen‐mediated methane upgrading processes. However, the high susceptibility of the active phase to coking and to sintering, which cannot be overcome by controlling the nuclearity of the metal species, hinders their practical implementation. Herein, a platform of carbon‐supported Ir−Ru catalysts with distinct metal ratios at comparable metal nanoparticle size (ca. 1.0 nm) was adopted to systematically study the effects of a second metal on reactivity and stability. Catalytic tests reveal ruthenium‐doped iridium nanoparticles as the first system that combines high CH3Br selectivity (up to 93 %) with unprecedented stability, outperforming any of the previously reported catalysts. This superior performance was rationalized by the intimate interaction between the two metals, forming ruthenium‐poor surface alloys, which enable suppressing deactivation mechanisms as well as over hydrogenation/coking pathways. [ABSTRACT FROM AUTHOR]

Partial hydrogenation of unsaturated hydrocarbons comprises an important family of reactions that are applied in many industrial sectors. Understanding the hydrogenation of polyunsatured and polyunsaturated compounds on heterogeneous catalysts at its molecular level remains a challenging milestone to fine-tune the product distribution. Our study presents a detailed mechanistic analysis of the gas phase hydrogenation of vinylacetylene (1-butene-3-yne) and valylene (2-methyl-1-butene-3-yne) over palladium and copper catalysts. These two metals are selected owing to their pronounced differences in continuous flow catalytic tests at ambient pressure. The chemoselectivity, regioselectivity, isomerization, and oligomerization patterns measured in a broad range of feed hydrogen/hydrocarbon ratios are rationalized by density functional theory simulations. An extended Brønsted-Evans-Polanyi relationship for both substrates and active metals is found for the hydrogenation processes. The identified factors that govern selectivity are similar to those identified for smaller C2 and C3 compounds and, thus, a means of systematization to other polyunsaturated compounds is opened up. [ABSTRACT FROM AUTHOR]

Nanostructuring earth‐abundant metals as single atoms or clusters of controlled size on suitable carriers opens new routes to develop high‐performing heterogeneous catalysts, but resolving speciation trends remains challenging. Here, we investigate the potential of low‐nuclearity iron catalysts in the continuous liquid‐phase semi‐hydrogenation of various alkynes. The activity depends on multiple factors, including the nuclearity and ligand sphere of the metal precursor and their evolution upon interaction with the mesoporous graphitic carbon nitride scaffold. Density functional theory predicts the favorable adsorption of the metal precursors on the scaffold without altering the nuclearity and preserving some ligands. Contrary to previous observations for palladium catalysts, single atoms of iron exhibit higher activity than larger clusters. Atomistic simulations suggest a central role of residual carbonyl species in permitting low‐energy paths over these isolated metal centers. [ABSTRACT FROM AUTHOR]

Metal‐free carbon catalysts represent attractive alternatives to platinum and chromium‐containing systems for the on‐purpose production of propylene, a crucial chemical building block, via non‐oxidative propane dehydrogenation. However, the role of heteroatoms in determining reactivity and stability is poorly understood. Here, the study of a platform of polyaniline‐derived and activated carbons, with distinct porous properties, and heteroatom type, content, and speciation, enables establishing improved structure‐performance relationships. In‐depth characterization reveals that, while several oxygen species potentially catalyze the reaction, carbonyl groups are the main functionality governing the activity. Oxygen loss via propane‐driven water evolution is the main deactivation path. Six‐fold enhanced stability evidenced over carbon catalysts derived from KOH‐post‐treated polyanilines demonstrates the importance of controlling the nanostructure for enhancing longevity. [ABSTRACT FROM AUTHOR]

A myriad of heterogeneous catalysts comprises multiple phases that need to be precisely structured to exert their maximal contribution to performance through electronic and structural interactions at their peripheries. In view of the nanometric, tridimensional, and anisotropic nature of these materials, a quantification of the interface and the impact of catalytic sites located there on the global performance is a highly challenging task. Consequently, the true origin of catalysis often remains subject of debate even for widely studied materials. Herein, an integrated strategy based on microfabricated catalysts and a custom‐designed reactor is introduced for determining interfacial contributions upon catalytic activity assessment under process‐relevant conditions, which can be easily implemented in the common catalysis research infrastructure and will accelerate the rational design of multicomponent heterogeneous catalysts for diverse applications. The method is validated by studying the high‐pressure continuous‐flow hydrogenation of CO and CO2 over Cu–ZnO catalysts, revealing linear correlations between the methanol formation rate and the interface between the metal and the oxide. Characterization of fresh and used materials points to the model catalyst preparation as the current challenge of the methodology that can be addressed through further development of nanotechnological tools. [ABSTRACT FROM AUTHOR]

Developing efficient solid catalysts is necessary when for example moving from batch chemistry to continuous flow systems. In this work, scale‐up effects of zeolite‐based catalyst materials have been tested in aldol condensation as a model reaction for bio‐oil upgrading via deoxygenation. For this purpose, shaped catalyst bodies were obtained via extrusion of ultrastable Y zeolite (USY) using either attapulgite (Att.) or bentonite (Bent.) as clay binder, followed by post‐alkali metal ion grafting of K+ after (rather than before) extrusion. This approach proved essential to preserve the catalysts' crystallinity. The Att.‐bound catalyst body was more active than its Bent.‐counterpart, correlating well with the observed changes in physicochemical properties. The K‐(USY/Att.) catalyst showed new basic oxygen and strong Lewis acidic sites resulting from clay incorporation, in addition to the Lewis acid (K+) and basic sites (K−OH) created upon grafting. For K‐(USY/Bent.), the grafting proved less efficient, likely due to pore blockage caused by the binder. Bent. addition resulted in acid sites of moderate Brønsted and strong Lewis acidity, but hardly any of the basicity desired for the aldol condensation reaction. The poor potassium grafting yet led to some cation exchange with the binder (likely with the Na+ naturally present in the Bent. material). The results obtained demonstrate the critical importance of the choice of the binder material and the synthesis protocol adopted for upscaling solid base materials in the form of catalyst bodies. [ABSTRACT FROM AUTHOR]

Identification and quantification of redox‐active centers at relevant conditions for catalysis is pivotal to understand reaction mechanisms and requires development of advanced operando methods. Herein, we demonstrate operando EPR spectroscopy as an important technique to quantify the oxidation state of representative CrPO4 and EuOCl catalysts during propane oxychlorination, an attractive route for propylene production. In particular, we show that the space‐time‐yield of C3H6 correlates with the amount of Cr2+ and Eu2+ ions generated over the catalysts during reaction. These results provide a powerful strategy to gather quantitative understanding of selective alkane oxidation, which could potentially be extrapolated to other functionalization approaches and operating conditions. [ABSTRACT FROM AUTHOR]

Identification and quantification of redox‐active centers at relevant conditions for catalysis is pivotal to understand reaction mechanisms and requires development of advanced operando methods. Herein, we demonstrate operando EPR spectroscopy as an important technique to quantify the oxidation state of representative CrPO4 and EuOCl catalysts during propane oxychlorination, an attractive route for propylene production. In particular, we show that the space‐time‐yield of C3H6 correlates with the amount of Cr2+ and Eu2+ ions generated over the catalysts during reaction. These results provide a powerful strategy to gather quantitative understanding of selective alkane oxidation, which could potentially be extrapolated to other functionalization approaches and operating conditions. [ABSTRACT FROM AUTHOR]

The methoxycarbonylation of anilines stands as an attractive method for the phosgene‐free production of carbamates. Despite the high yields obtained for ceria catalysts, the reduction of the amount of side products and the prevention of catalyst deactivation still represent major hurdles in this chemistry. One advantage of ceria is the possibility of tuning its reactivity by doping its lattice with other metals. In the present work, a series of doped ceria‐based materials, prepared by substitution with metals, are evaluated in the methoxycarbonylation of 2,4‐diaminotoluene with dimethyl carbonate. Among all catalysts, containing Eu, Hf, La, Pr, Sm, Tb, Y or Zr, ceria promoted with 2 mol % Zr exhibited 96 % selectivity towards the desired carbamates, improving the pure CeO2 catalyst. Density functional theory demonstrates that two descriptors are needed: 1) a geometric factor that governs the reduction of energy barriers for carbamate formation through ureas; 2) catalyst basicity as N−H bonds need to be activated. Assessment in subsequent reaction cycles revealed that the CeO2–ZrO2 catalyst is more stable than bulk CeO2, along with the reduction of fouling processes. [ABSTRACT FROM AUTHOR]

The electroreduction of carbon dioxide using renewable electricity is an appealing strategy for the sustainable synthesis of chemicals and fuels. Extensive research has focused on the production of ethylene, ethanol and n‐propanol, but more complex C4 molecules have been scarcely reported. Herein, we report the first direct electroreduction of CO2 to 1‐butanol in alkaline electrolyte on Cu gas diffusion electrodes (Faradaic efficiency=0.056 %, j1‐Butanol=−0.080 mA cm−2 at −0.48 V vs. RHE) and elucidate its formation mechanism. Electrolysis of possible molecular intermediates, coupled with density functional theory, led us to propose that CO2 first electroreduces to acetaldehyde‐a key C2 intermediate to 1‐butanol. Acetaldehyde then undergoes a base‐catalyzed aldol condensation to give crotonaldehyde via electrochemical promotion by the catalyst surface. Crotonaldehyde is subsequently electroreduced to butanal, and then to 1‐butanol. In a broad context, our results point to the relevance of coupling chemical and electrochemical processes for the synthesis of higher molecular weight products from CO2. [ABSTRACT FROM AUTHOR]

The electroreduction of carbon dioxide using renewable electricity is an appealing strategy for the sustainable synthesis of chemicals and fuels. Extensive research has focused on the production of ethylene, ethanol and n‐propanol, but more complex C4 molecules have been scarcely reported. Herein, we report the first direct electroreduction of CO2 to 1‐butanol in alkaline electrolyte on Cu gas diffusion electrodes (Faradaic efficiency=0.056 %, j1‐Butanol=−0.080 mA cm−2 at −0.48 V vs. RHE) and elucidate its formation mechanism. Electrolysis of possible molecular intermediates, coupled with density functional theory, led us to propose that CO2 first electroreduces to acetaldehyde‐a key C2 intermediate to 1‐butanol. Acetaldehyde then undergoes a base‐catalyzed aldol condensation to give crotonaldehyde via electrochemical promotion by the catalyst surface. Crotonaldehyde is subsequently electroreduced to butanal, and then to 1‐butanol. In a broad context, our results point to the relevance of coupling chemical and electrochemical processes for the synthesis of higher molecular weight products from CO2. [ABSTRACT FROM AUTHOR]