Search

Background: Health care systems contribute significantly to greenhouse gas emissions. One source of these emissions is single-use products. Examination table paper does not confer protection against microbial contamination and thus can be omitted while following infection control standards. The objective is to eliminate the routine use of examination table paper in outpatient oncology clinics at BC Cancer. Methods: A quality improvement approach was used. Examination tables continued to be disinfected using wipes between patients, but table paper was not used. Plan-do-studyact cycles were performed at four regional cancer centres. Results: Pre-intervention, the cancer centres used 19 to 69 rolls of paper monthly. Postintervention, usage declined to 0 to 2 rolls monthly. This was associated with annual cost savings of $3974 and a reduction of 32 501 kg of carbon dioxide emissions. Conclusions: The use of examination table paper can be eliminated in outpatient clinics, resulting in both cost savings and a reduction in carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

As China's demand for paper products increases, China's paper industry faces enormous pressure to reduce greenhouse gas emissions. By using material flow analysis in combination with input–output analysis, this study measured the waste paper recovery rate in a more accurate method and analyzed the impact of waste paper recycling on the carbon emissions from China's paper industry. China's waste paper recovery rate estimated in this study was close to 70% in 2017, much higher than that of 48% obtained with the traditional method. The regression results displayed a negative relationship between waste paper recovery rate and CO2 emissions per unit of paper consumption during 2000–2017 in China. The rolling regression results further indicated that the impact of waste paper recycling was becoming stronger on reducing CO2 emissions per unit of paper consumption in China. Since an inverted "U" shape relationship exists between waste paper recovery rate and its reduction effect on carbon emissions from the paper industry, the regression results suggested that China's waste paper recovery rate has not reached the optimal level with regard to carbon emissions from China's paper industry. Thus, although China's waste paper recovery rate has reached a relatively high level, currently waste paper recycling is still an effective method to reduce carbon emissions from China's paper industry. [ABSTRACT FROM AUTHOR]

China has been the world's largest producer and consumer of paper products. In the context of the "carbon peaking and carbon neutrality goals", China's papermaking industry which is traditionally a high energy-consuming and high-emissions industry, desperately needs a nationally appropriate low-carbon development path. From the consumption-side perspective, this paper calculates the CO2 emissions of China's papermaking industry from 2000 to 2019 by using carbon emission nuclear algorithm, grain-straw ratio, first-order attenuation method, and STIRFDT decomposition model, etc., to further explore the core stages and basic patterns affecting the industry's carbon peaking. The results show that the total CO2 emissions of China's papermaking industry showed an upward trend from 2000–2013, stable from 2013–2017, and a steady but slight decline from 2017–2019. Meanwhile, the total CO2 emissions of the full life cycle of paper products in China have decreased to a certain extent in the raw material acquisition, pulp, and paper making and shipping stages, with only the waste paper disposal stage showing a particular upward trend. We find that from 2000 to 2019, China's CO2 emissions in the pulping and papermaking stage of paper products accounted for 68% of the total emissions in the whole life cycle, of which 59% was caused by coal consumption. Moreover, the scenario prediction shows that improving the energy structure and increasing the waste paper recovery rate can reduce the CO2 emissions of the industry, and it is more significant when both work. Based on this and the four core stages of CO2 emissions of the papermaking industry we proposed ways to promote CO2 emissions peaking of China's paper products. [ABSTRACT FROM AUTHOR]

Although there are opportunities to reduce electrical energy demand in unit processes of mechanical pulp-based paper and paperboard production, this may not be financially beneficial. This is generally because energy optimization opportunities connected to reduced refiner electricity demand in mechanical pulping systems also results in less steam available for the drying of the paper. As modern high consistency refiner systems produce approximately one ton of steam for each MWh of electricity when producing one ton of pulp, a reduction in electric energy demand leads to increased fuel demand in steam boilers to compensate for the steam shortage. In this study, we investigated what the financial and environmental situation would look like if we were to expand the system border from a paper mill to a larger system consisting of a mechanical pulp-based paper or paperboard mill, a district heating system with an incineration boiler and a chemical pulp mill. Mechanical pulp production has a wood to product yield of >90%, a high electric energy demand to separate woodchips to pulp and is a net producer of heat and steam while chemical pulp-based production has a wood to product yield of 50%, a low electric energy demand and is a net heat and electricity producer due to the combustion of dissolved wood polymers. The aim of this research is to create useful and robust models of how to use excess heat from certain industry sites to cover the steam shortage in other industry sites by means of utilizing and optimizing the district heating systems connecting these sites. For this purpose, we used a simulation tool which dynamically allows us to evaluate different scenarios. Our results shows that there is great potential to reduce both carbon dioxide emissions and production costs for industry sites and society by means of these tools. [ABSTRACT FROM AUTHOR]

The increasing demand for world paper consumption stimulates the growth of paper and pulp industries and lead to high carbon emission. Electricity and thermal energy are critically demanded by the paper and pulp industries. The premises utilizing grid electricity are carbon intensive as the grid energy mainly generates electricity from burning coal. Alternative energy resources that are less carbon-intensive such as natural gas and solar energy, can be used to generate electricity to fulfil the energy demand of the pulp and paper industry and mitigate carbon emissions. This study implemented cogeneration natural gas boilers and solar energy to substitute the dependency on grid electricity from Tenaga National Berhad as they are less carbon intensive than coal fuel. Carbon and economic analysis were conducted on the case studies that replaced grid electricity supply from TNB by implementing cogeneration natural gas boilers and solar energy. The results show that the total savings/kWh of energy produced from cogeneration natural gas boiler range from 0.155 MYR/kWh to 0.164 MYR/kWh. The total savings per kWh of energy produced from solar energy is higher, which was 0.207 MYR/kWh of solar energy produced. Solar has better operation cost savings per unit of electricity generated, but a limited installation area restricts the implementation. In the future, the increasing efficiency of solar technology will make the option viable while achieving more cost savings and carbon emission reduction. [ABSTRACT FROM AUTHOR]

Copyright of Archives of Environmental Protection is the property of Polish Academy of Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Reducing examination table paper (ETP) use may help curb carbon emissions from health care. Six participants applied Glo Germ (DMA International) to their hands before a common physical examination (abdominal, cardiorespiratory, hip and knee) both with and without ETP. After each exam, UV light was shined on the exam table and photographs were taken. The number of hand touches on ETP-covered areas and uncovered areas were tallied and compared using t tests. Despite covering more surface area, participants touched areas without ETP significantly more than ETP-covered areas (P <.05). Despite its continued use, patients do not have much hand contact with ETP during common clinical examinations. [ABSTRACT FROM AUTHOR]

Recycling is emerging as both a viable alternative to extraction in many industries and a cornerstone of the circular economy. In this paper, we assess the role of paper and cardboard recycling on the forest sector, from both an economic and carbon perspective. For this purpose, we add the recycling industry to an existing forest-sector model in an attempt to capture its effects on other wood products and the overall forest resource. As the forest sector has an important potential for climate change mitigation, this model allows us to assess the effects of increased paper and cardboard recycling on the availability of the natural resource and the carbon balance of the forest sector. We show that these results are strongly linked to the hypotheses of substitutability and/or complementarity of recycled pulp and virgin pulpwood. Although we find increased emissions at the pulp sector level, the effects on emissions in other wood products are small. When pulp products are considered substitutes, we find the impact on total net sequestration to be positive. In the case where pulp products are considered complements, we find the impact on total net sequestration to be negative. [ABSTRACT FROM AUTHOR]

The paper industry is a high-carbon emission and energy-intensive industry. From the perspective of low-carbon trade and carbon neutrality, its energy conservation and emission reduction are worthy of attention. This study used the input-output model to calculate the embodied carbon emissions of China’s paper industry’s export trade to the United States from 2006 to 2020 and used the logarithmic mean division index (LMDI) method to analyze influencing factors of the change of embodied carbon emissions. The study found that the embodied carbon emissions of China’s paper industry’s export trade to the United States generally shows a stable downward trend after reaching the peak with the increase of export trade scale; scale effect is the main factor that causes the embodied carbon emissions, while technological progress, policy support, and environmental regulations are important driving forces to promote carbon emission reduction. The research results of this paper not only can test and guide China’s paper industry trade policies and industrial policies, but they can also provide decision-making reference for China and the United States to promote the carbon emission reduction of the paper industry. [ABSTRACT FROM AUTHOR]

Paper and pulp manufacturing industry produces versatile products from renewable feedstock that are easily recycled. It is the fourth largest industrial sector in terms of energy use. Much of the energy used comes from biomass derived fuels or high efficiency combined heat and power plants so the industry is not considered as carbon intensive. But at production paper making emits five times the CO2/tonne of steel; this is gradually removed from the atmosphere by the growth of replacement trees which can take between 7 and 90 years. This study reviewed existing literature to establish estimates for future energy requirements, and way that these could be met with minimum carbon emissions in a world where there are electricity grids with low carbon intensities, high recycling rates and growing demand for sustainable biomass. It was found that energy consumption could be reduced by 20% using technologies that have been demonstrated at an industrial scale. Most virgin pulp is made using the kraft chemical processing method. It was found that it should be possible to eliminate all fossil fuel use from this process, by combustion of by-product while exporting a small amount of electricity. Recycled paper is becoming the largest source of pulp. In this case the waste streams cannot provide sufficient energy to power the process, but process heat can be produced by burning some of the collected waste paper in steam plants or by using electric heat pumps. The energy needed to produce high quality office paper is nearly twice that required for non-deinked packaging paper. This couples with the lower pulp yields obtained with high quality pulp means that the environmentally preferred option for energy supply to the recycling process is dependent on the grade of pulp being produced.

This paper studies the impact of digital economy development on carbon emissions, which is a hot topic in the field of environmental economics. This topic is within the scope of the Frontiers in Environmental Science and is particularly in line with the theme of Environmental Economics and Management section in the journal. Firstly, this paper constructs the Digital Economy Development Index and its variable indicators to measure the development of the digital economy. Secondly, this paper uses urban panel data to reveal the impact of digital economy development on carbon emissions, and further adopts IV method to deal with endogeneity issues. Thirdly, this paper performs the heterogeneity analyses depending on the characteristics of the city. The results can provide a basis for formulating differentiated policies. Fourthly, this paper further explores the mechanism by which the digital economy affects carbon peaking. The results show that the digital economy may influence carbon peaking through upgrading of the industrial structure, technical innovation, and energy consumption. [ABSTRACT FROM AUTHOR]

Carbon emissions from the Yangtze River Economic Belt are an important element of China's carbon emission endeavor, and a study of its emission reduction pathway can provide a reference for the country's overall management of carbon emission reduction. From the perspective of energy consumption, this paper uses the carbon emission factor method to estimate the carbon emissions of the transportation industry in the Yangtze River Economic Belt during 2006–2020, based on the extended STIRPAT model, considering the influence of seven factors, i.e., population size, urbanization rate, GDP per capita, transportation added value, energy structure, energy intensity, and transportation intensity, on carbon emissions. Based on these factors, a scenario analysis, combined with a forecasting model, is used to predict the peak carbon performance of the transportation industry under different development scenarios. The results show that the overall carbon emissions of transportation in the YEB from 2006 to 2020 show a fluctuating upward trend, and the downstream carbon emissions are significantly higher than those in other regions. The main factors influencing carbon emissions from transportation in different upstream, midstream, and downstream regions vary, with both population and economic factors contributing to carbon emissions, while technical factors affect them differently. There are significant differences in the peak carbon performance of transportation under different development scenarios, and the government should take effective measures to work towards achieving the goals of the low-carbon or enhanced low-carbon scenarios. [ABSTRACT FROM AUTHOR]

Carbon emission issues are becoming increasingly severe, and the carbon emissions in shrinking cities, primarily characterized by population loss, are often overlooked and insufficiently studied. This paper focuses on the carbon emissions from county-level administrative units in China's three northeastern provinces from 2001 to 2017. The study scientifically identified shrinking cities and measured the differences in carbon emission characteristics between growing and shrinking cities using the Theil index. Ultimately, the paper constructs a panel spatial econometric model to analyze the factors influencing them and explore their spatial effects. (1) The total carbon emissions in the Three Northeastern Provinces exhibited an inverted U-shaped trend, increasing from 734.21 million tons in 2001 to 1731.73 million tons in 2017, with the Mann–Kendall trend test showing a significant increase; spatially, this manifests as a significant positive spatial autocorrelation. (2) The region has 138 shrinking cities, accounting for over 50%; regarding carbon emission characteristics, the Theil index has consistently remained above 0.18, indicating significant differences between the carbon emissions of growing and shrinking cities. (3) The panel spatial econometric model results show that the influencing factors of carbon emissions in shrinking cities have unique directions, intensities, and spatial effects. In shrinking cities, aside from localized GDP effects and per-capita GDP acting as a suppressant, the population size has a pronounced inhibitory effect on local and surrounding carbon emissions. The analysis reveals significant differences in the carbon emission patterns and mechanisms between growing and shrinking cities; based on these results, the paper proposes differentiated carbon control strategies. [ABSTRACT FROM AUTHOR]

Copyright of Avances is the property of Instituto de Informacion Cientifica y Tecnologica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Engineering (17264073) is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The building sector contributes to 40% of the total final energy consumption and 36% of CO2 emissions in Europe, and these are set to increase in the coming years. International directives are pushing towards a decarbonisation roadmap to improve the quality of cities and the health of citizens. Buildings have a potentially central role in terms of energy transition as a means to produce and save energy. Photovoltaic shading devices (PVSDs) protect buildings from direct solar radiation and overheating while producing renewable electricity onsite and increasing the users' thermal comfort. Even though the potential of the PVSD is considerable, the sector is still unexplored, and few studies on the topic are available in the literature. This systematic review aims to present an exhaustive overview of the current literature on state-of-the-art PVSDs by analysing the scientific framework in terms of the status of the research. It presents a performance-based approach focusing on innovative products, PVSD design strategies, and energetic performance in distinct climate conditions and configurations. In particular, 75 articles and about 250 keywords were identified, selected, and analysed. The literature review serves as a basis for further R&D activities led by both the industrial and the academic sectors. [ABSTRACT FROM AUTHOR]

This paper analyses carbon emissions and value-added embodied in trade between two large developed countries, South Korea and the United States, during 2000-2014. Using multi-regional input-output (MRIO) tables, our analysis reveals that carbon emissions and value-added embodied in exports grew by 19% and 101% for South Korea but shrank by 43% and 7% for the United States. As a result, South Korea experienced a 40% increase in net carbon exports and 243% increase in net valueadded exports. At the industry level, the primary drivers of changes in carbon exports were electricity and basic materials. The majority of industries in witnessed improvements in carbon intensities suggesting improved environmental efficiency. While both countries achieved a decoupling of carbon emissions from value-added exports, substantial year-to-year and sectoral variations were observed. Finally, structural decomposition analysis indicates that domestic supply-side factors played a role in decreasing emissions whereas foreign demand-side factors contributed to emissions increases. In line with the main findings, various implications for policy and future research are discussed. [ABSTRACT FROM AUTHOR]

Magnetotelluric (MT) and audio-magnetotelluric (AMT) studies are sensitive to the geothermal fluids filling the faults and/or fracture zones of the geothermal system. In India, MT/AMT studies have been carried out in NW Himalayas, central, eastern, and western India. In other areas, detailed MT/AMT studies need to be expedited. This review paper presents the art of geothermal exploration in India by using MT/AMT techniques and identifies potential zones that can be exploited for power generation and direct application. Reservoir characteristics, carbon emissions reduction methods, and levelised cost factor are also discussed. [ABSTRACT FROM AUTHOR]

Due to the high density of users hosted everyday, public buildings are important producers of waste and emissions of greenhouse gases (GHGs). Public restrooms play an underrated role in waste generation and GHG emissions, especially if paper towels are used as the hand-drying method. The choice of the hand-drying method (i.e., paper towels vs. electrical hand dryers) also affects the economic balance of a public institution, involving costs for the purchase of hand-drying materials/apparatuses, energy and waste disposal. The present paper aims at evaluating the economic and environmental impact of the introduction of electrical hand dryers (alternative scenario) in place of paper towels (reference scenario) in a public building. The paper presents a solid methodology, based on a numerical experiment approach, to identify a decision criterion for establishing the economical convenience of adopting the alternative scenario in public restrooms. Key factors affecting the choice between the proposed alternatives are presented and discussed in a dedicated sensitivity analysis. From the environmental point of view, this study evaluates the impact of each scenario in terms of GHG emissions, related to multiple waste treatment options and different electric grid mixes. Based on the experimental assumptions, the method allowed concluding that the alternative scenario becomes economically convenient when the number of daily usages (N) is > 57 ± 4. The environmental convenience of the alternative scenario is visible even at N < 10. The method here described can be successfully used to support strategic decisions for cost optimization and environmental mitigation in institutional buildings. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is a high energy consuming and polluting sector, and carbon emissions emitted from this sector are worthy of attention. This article, based upon an analysis of China’s Pulp and Paper Industry (CPPI), provides estimates of each of the following: carbon emissions from energy consumption, pre-treatment sector, combustion of condensed black liquor, and methane emitted from incomplete aerobic digestion during sewage treatment of CPPI. During the study period (2005–2012), total CO 2 emissions ranged from 126.0 Mt to 155.4 Mt. Energy consumption was estimated to be the largest source of carbon emissions, however, due to the application of the local emission inventory rather than the IPCC inventory, energy consumption decreased by 4.7%, a lower percentage than was calculated in a previous study. According to this study’s estimation, the emissions caused by the recovery of biomass energy contributed 26–29% of the total CO 2 emissions. CH 4 generated from sewage treatment accounted for 9–11% of the total carbon emissions. The CO 2 intensity dropped during the study period, which reflected the improvement of energy efficiency in the pulp and paper industry. The outcome of this study provides not only detailed information about CPPI’s carbon emissions, but also a calculation framework for studying carbon emissions from pulp and paper sector in the other regions. It suggests that the local carbon emissions inventory should be used for estimating carbon emissions and to reduce the fossil fuel energy, increase energy recovery from biomass, and that promoting cleaner production is essential to achieve a low carbon development of the pulp and paper industry. [ABSTRACT FROM AUTHOR]

With the implementation of deep-market-oriented reforms in China, an accurate interpretation of the effect and transmission mechanism of the marketization of industrial land transfer on carbon emission reduction can provide references for further elevating the role of land policy in China's low-carbon economic transition. Based on the balanced panel data of China's provincial level from 2009 to 2020, this paper uses carbon emission intensity to quantify emission reduction targets, and studies the effects of the marketization of industrial land transfer on regional carbon emission intensity, as well as its internal mechanism, by describing the typical characteristics. Moreover, this paper analyzes the moderating role of environmental governance and conducts area heterogeneity analysis. The main results show that (1) the marketization of industrial land transfer can significantly reduce regional carbon emission intensity, and the negative effect is stronger in the mid-west compared with the effect in the east. (2) Environmental governance can play a positive moderating role in the relationship between the marketization of industrial land transfer and the carbon emission intensity. (3) Industry selection is the internal mechanism by which the effect of the marketization of industrial land transfer on regional carbon emission intensity operates, and the mechanism is represented more prominently in the mid-west. The main conclusions provide inspiration for land policy regulation in relation to carbon emission reduction. China's local governments should implement specific strategies to improve the market-based operation mechanism of land, attracting industries with high energy efficiency and low carbon emissions, and strengthening the intensity of environmental governance. [ABSTRACT FROM AUTHOR]

Scholars have turned their attention to the ecological protection and high-quality development of China's Yellow River Basin in recent years. The basin is a major agricultural production area in China, hence investigating agricultural carbon emission reduction strategies in the basin is crucial. The research object in this article is the agricultural departments of China's nine provinces in the Yellow River Basin from 2005 to 2018. Agricultural carbon emissions are measured using agricultural land usage, rice planting, crop planting, straw burning, and livestock breeding as agricultural carbon sources. In addition, the GTWR model is used to examine the spatiotemporal aspects of the impact of five factors on agricultural carbon emissions in this paper. The findings reveal that the five factors have varying degrees and directions of influence. [ABSTRACT FROM AUTHOR]

Low-quality materials contained in separately collected (SC) packaging waste generate environmental and economic burdens associated to both sorting operations of Material Recovery Facilities (MRFs) and landfilling of non-recyclable materials. In this study, based on quantification of both impurities and recyclable fractions, the quality of SC municipal packaging waste streams was determined by compositional analysis of the waste entering a MRF throughout a year. Foreign materials (% w/w) found in the monitored SC glass, paper plus cardboard and lightweight packaging waste, were on average 5.0, 14.7 and 23.0, respectively, while landfilled materials (% w/w) after MRF sorting operations were on average 4.3, 10.3 and 22.0, respectively. A Life Cycle Assessment study was conducted to determine the environmental impact of SC packaging waste streams quality of three different scenarios: current situation (CS), better (BS) and ideal (IS) scenario with reduced presence and absence, respectively, of improper materials in the three examined SC packaging waste streams. Emission of 32.1 kg CO 2 eq/t waste was calculated for the current situation with a reduction by 66.1% and 98.0% in CO 2 eq emission for BS and IS scenario, respectively. Similar emission reductions were calculated for ozone depletion, ionizing radiations, particle matter formation, fossil fuel depletion and primary energy demand impact categories. The environmental life cycle costing study demonstrated that total savings of € 35.2 and € 66.6 for each ton of SC packaging waste stream entering the MRF could be obtained for BS and IS scenario, respectively. [Display omitted] • Impurities in packaging waste streams generate environmental and economic burdens. • 23.0% of impurities were found in separately collected lightweight packaging waste. • Plant sorting operations generate 32.1 kg CO 2 eq for each ton of packaging waste. • € 35.2/ton of sorted packaging waste could be saved by reducing impurities content. [ABSTRACT FROM AUTHOR]

Greenhouse gases from industrial activities have become a global problem. Emissions management is being developed to raise awareness of the importance of controlling pollution in general and atmospheric emissions in particular. In 2017, the deficit of the rights of issuance in the industrial sectors increased up to 8.3% (verified emissions in 2017 versus allocation in 2017). This trend will increase more at the end of Phase III due to a progressive reduction in allocation. Phase IV will be much more restrictive in allocating emission rights than Phase III. The extra cost of this deficit reinforces the need for industry in general to reduce CO2 and for the paper industry to reduce GHG emissions and generate credits. Old factories are typically identified as sources of pollution in addition to being inefficient compared to new factories. This article discusses the possibilities offered by maintenance actions, whose integration into a process can successfully reduce the environmental impact of industrial plants, particularly by reducing the CO2 equivalent emissions (CO2-eq units henceforth CO2) they produce. This case study analyzes the integration of maintenance rules that enable significant thermal energy savings and consequently CO2 emissions reduction associated with papermaking. Managing Key Performance Indicators (KPIs), such as the amount of cold water added to the boiler circuit and the conditions of the air blown into the dryer section hood, can be used as indicators of CO2 emissions generated. The control of the water and temperature reduces these emissions. A defined measure—in this case, t CO2/t Paper—indicates an achievement of a 21% reduction in emissions over the past 8 years. [ABSTRACT FROM AUTHOR]

Land-use change in the boreal forest region leads to agriculture to be carried out on acid, shallow and low fertility soils. To correct soil fertility and promote crop productivity, manure and inorganic fertilizers are added, increasing the risk for greenhouse gas emissions (GHGE). To reduce the reliance on synthetic soil amendments while taking advantage of locally relevant industrial by-products, wood ash (WA) and paper sludge (SL) have been proposed as soil amendments for a range of soil types. We posited that amending soils with WA , SL and biochar will improve soil health parameters and fertility of boreal soils. Microbial activity resulting to nitrogen losses and availability were assessed. WA had a stronger ameliorative effect on acid boreal soils compared to SL. Both WA and SL increased soil microbial biomass and basal respiration resulting in higher net mineralization and thus significant increases in CO 2 emissions. Co-application of urea with WA or SL further increased net mineralization compared to when used independently. Conversely, the biochar's effect was short-lived and not significant. Nevertheless, addition of biochar was shown to reduce CO 2 emissions in all cases except in WA amended soils. No significant differences were observed in CH 4 emissions across all treatments. WA and SL may improve soil fertility and quality but could also contribute significantly to GHG emissions in acid boreal soils. Further research is recommended to assess the mitigating effect of various biochar feedstocks on GHG emissions when co-applied with WA and SL. • The effect of wood ash and paper sludge on acid soils was tested in incubation tests. • Both increased the soil microbial biomass, respiration, and net mineralization. • Greenhouse gas emissions were larger for paper sludge amended soils. • Supplementing biochar to wood ash increased soil CO 2 fluxes. • Supplementing biochar to paper sludge or limestone ash reduced soil CO 2 fluxes. [ABSTRACT FROM AUTHOR]

China's rapid urbanization has led to the development of integrated transport networks, which requires the transport sector to pay particular attention to the integrated transport comprehensive carrying capacity (ITCCC). Concurrently, global climate change has focused the world community's attention on greenhouse gas concentrations like CO2. This study establishes an ITCCC measurement model of urban agglomerations (UAs) and measures the comprehensive carrying capacity from four factors: socio-economic, basic resources, transport facilities, and traffic environment. In particular, this paper takes carbon emission as a critical indicator of the traffic environment when considering the impact factors of ITCCC. Based on the data of China's five major UAs, this study estimates carrying capacity levels with the ITCCC model and analyses regional characteristics using the spatial-temporal differentiation method. The results show that the traffic environment significantly impacts the ITCCC. Further low-carbon transport policies and measures are recommended to achieve sustainable development of integrated transport in UAs. [ABSTRACT FROM AUTHOR]

With the establishment of the "double carbon" goal, various industries are actively exploring ways to reduce carbon emissions. Cloud data centers, represented by cloud computing, often have the problem of mismatch between load requests and resource supply, resulting in excessive carbon emissions. Based on this, this paper proposes a complete method for cloud computing carbon emission prediction. Firstly, the convolutional neural network and bidirectional long-term and short-term memory neural network (CNN-BiLSTM) combined model are used to predict the cloud computing load. The real-time prediction power is obtained by real-time prediction load of cloud computing, and then the carbon emission prediction is obtained by power calculation. Develop a dynamic server carbon emission prediction model, so that the server carbon emission can change with the change of CPU utilization, so as to achieve the purpose of low carbon emission reduction. In this paper, Google cluster data is used to predict the load. The experimental results show that the CNN-BiLSTM combined model has good prediction effect. Compared with the multi-layer feed forward neural network model (BP), long short-term memory network model (LSTM), bidirectional long short-term memory network model (BiLSTM), modal decomposition and convolution long time series neural network model (CEEMDAN-ConvLSTM), the MSE index decreased by 52 % , 50 % , 34 % and 45 % respectively. [ABSTRACT FROM AUTHOR]

Based on panel data for 30 provinces in China from 2000 to 2020, this paper uses entropy method to construct the integrated development indicators of energy Internet, and explores the impact of the development of the energy Internet on reducing carbon emissions in China and its internal transmission mechanism. The research results show that the development of energy Internet can significantly reduce regional carbon dioxide emissions, and increasing the use of renewable energy is an important mechanism for the comprehensive development of energy Internet to curb carbon emissions. Heterogeneity analysis shows that the emission reduction effect brought by the development of energy Internet is more remarkable in the regions with lower carbon emissions and western China. Furthermore, this paper finds that in the setting of the development of energy Internet, the development of renewable energy can promote natural gas consumption and advance energy conversion efficiency. The government's emphasis on regional technology development has an external strengthening effect on carbon emission reduction. The research in this paper expands and diversifies carbon reduction pathways and provides reference for more developing countries to utilize the development of energy internet to achieve carbon reduction. [ABSTRACT FROM AUTHOR]

Energy shortage and excessive carbon emissions have become the main constraints to the sustainable development of China's logistics industry. Improving the efficiency of the logistics industry is crucial to promoting regional ecological environment protection and sustainable development of the logistics industry. In this paper, the efficiency of China's logistics industry in 2013–2019 is evaluated by using the non-oriented EBM model considering the unexpected output, and then the influencing factors of the efficiency of the logistics industry in the central region are analyzed by using the panel Tobit model. The results show that the logistics industry in the central region is at a low efficiency level. Factors, such as the level of economic development, industrial structure and technical level have a significant positive impact on the efficiency of the logistics industry in the central region, while factors such as government support and logistics infrastructure have a significant negative impact on the efficiency of the logistics industry in the central region. Finally, the paper puts forward some targeted recommendations for the sustainable development of the logistics industry in the central region. [ABSTRACT FROM AUTHOR]

China has always tried to maintain multilateralism and advocated working together to deal with global climate change through multilateral mechanisms. Although China’s announcement to peak its carbon emissions by 2030 comes as no surprise, its commitment to carbon neutrality does. As the period between its carbon peaking and carbon neutrality is far shorter than that in the developed countries, China’s economic and energy structures need to be adjusted toward the low-carbon and carbon-free end with unprecedented efforts. To that end, China should define the responsibilities of local authorities and industrial entities to promote the orderly accomplishment of carbon peaking in all regions and industries. To supply the huge investments needed to achieve the goals of carbon peaking and carbon neutrality, China has an urgent need to accelerate the development of green finance and a national carbon emissions trading market, guide the rational allocation of resources, and channel resources to eco-friendly projects for green and low-carbon development. At the same time, China and the international community should strengthen dialogue and coordination, promote international cooperation on the way to carbon neutrality, formulate widely acceptable policy guidelines as soon as possible, and avoid unilateral measures that may cause conflicts. [ABSTRACT FROM AUTHOR]

This paper investigates the low-carbon product manufacturer's different decision behavior in the offline traditional retail channel and online e-commerce channel when the carbon trading market has been established. The low-carbon product manufacturer is both in the carbon trading market and product market. In the former market, the manufacturer can gain profits by selling its emission quota. In the latter market, the manufacturer has two sales channel options, the traditional offline retailer and the online e-commerce platform. These two channels make two supply chains, the manufacturer-led offline one and the e-commerce platform-led online one. This paper combines the carbon trading market with the product market, formulates different Stackelberg game models, compares the manufacturer's decision under two channels and the impact of channels on the carbon emission, does sensitivity analysis, and verifies the conclusions with numerical examples. Our findings are (1) the establishment of the carbon market will help the manufacturer reduce its carbon emission, especially for those sensitive to the carbon price and those with too much emissions; (2) whether the manufacturer turns to the online channel depends on the consumers' sensitivity to the sales service, and consumers' attention will guide the way to the online mode; (3) which mode is conducive to carbon emission reduction relies on the product type: the e-commerce platform does well for daily necessities of mass production while the traditional channel is better for experience goods. [ABSTRACT FROM AUTHOR]

Despite the hospitals separating out clean plastic waste, it was combined with clean paper waste, and none of the hospitals' waste contractors provides a recycling service that can separate the two and recycle them, and so this waste is incinerated with energy recapture. I Dear Editor i The National Health Service (NHS) contributes 4-5 per cent of the UK's greenhouse gases and one-quarter of all public-sector waste. [Extracted from the article]