Search

A three dimensional (3D) reduced graphene oxide (rGO)/zeolitic imidazolate framework-67(ZIF-67) aerogel (3D rGO/ZIF-67 aerogel) was prepared via in situ assembly of ZIF-67 polyhedrons on a 3D rGO networks, not only providing multifarious affinity interactions for synergistic promoting the adsorption behavior of organic dyes, but also constructing a holder for ZIF-67 polyhedrons to convenient separation. This porous aerogel displays excellent absorption ability for cationic dyes (crystal violet, CV) and anionic dyes (methyl orange, MO). The maximum adsorption capacities are up to 1714.2 mg·g −1 and 426.3 mg·g −1 for CV and MO, respectively. 3D rGO/ZIF-67 aerogel shows a remarkable promoting of CV adsorption capacity than pure 3D rGO and ZIF-67. The ultrahigh adsorption capability towards cationic CV dyes is mainly driven by π-π interactions and electrostatic interactions between 3D rGO/ZIF-67 aerogel and dye molecules, and synergistic interactions at the interface of 3D rGO and ZIF-67 polyhedrons. The high adsorption capability towards anionic MO dyes is mainly due to the porosity of ZIF-67 polyhedrons and electrostatic attraction between MO and ZIF-67. The multi-component property of 3D rGO/ZIF-67 aerogel shows a great potential application in dye-bearing wastewater treatment. [ABSTRACT FROM AUTHOR]

Abstract Owing to the diverse structures and unique characteristics of MOFs, the combination of magnetic particles with porous MOFs is an attractive way for rapid and efficient extraction of organic pollutions from water. In this work, the magnetic porous composites, Fe 3 O 4 -PSS@ZIF-67 (PSS, poly (sodium-p-styrenesulfonate)), were prepared. The obtained composites exhibit core-shell structure, for which the spherical Fe 3 O 4 particles as core are embedded in ZIF-67 shell. The existence of SO 3 − anions on poly (sodium-p-styrenesulfonate) is the key factor for the uniform coating of ZIF-67 on Fe 3 O 4 particles. Poly (sodium-p-styrenesulfonate) providing enough chelating sites (-SO 3 −) for Co2+ which could further coordinate with 2-methylimidazole to form ZIF-67. This work further studied the adsorption property of 2-nitroresorcinol in aqueous solution, using Fe 3 O 4 -PSS@ZIF-67 as adsorbents. The equilibrium adsorption capacity for 2-nitroresorcinol is up to 52.50 mg g−1. The adsorption kinetics were investigated. The mechanism could be attributed to the electrostatic interaction between 2-nitroresorcinol and Fe 3 O 4 -PSS@ZIF-67 composites. Graphical abstract A new magnetic porous composites (Fe 3 O 4 -PSS@ZIF-67) was prepared, for which poly (sodium-p-styrenesulfonate) links the spherical Fe 3 O 4 core and ZIF-67 coating. The composites perform well on nitrophenol from aqueous solution via magnetic separation operation, mainly owing to the porosity of ZIF-67 and the electrostatic interaction between nitrophenol and composites. The combination of magnetic separation with MOFs is attractive way for efficient removal of nitrophenols from waste water. fx1 [ABSTRACT FROM AUTHOR]

Recently, biomass-based materials have attracted increasing attention because of their advantages of low cost, environment-friendly and nonpollution. Herein, the feasibility of using corn stalk biomass fiber (CF) and Fe3O4 embedded chitosan (CS) as a novel biomass-based adsorbent (CFS) to remove chloramphenicol (CAPC) from aqueous solution. Structure of CFS was characterized by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and zeta potential techniques. The effects of solution pH, adsorption time and ion strength on the adsorption capacity were examined. Adsorption isotherms obtained from batch experiments were better fitted by Langmuir model compared with Freundlich model, Dubinin–Radushkevich model and Temkin model. Adsorption kinetic data matched well to the pseudo-second order kinetic model. CAPC adsorption was endothermic, spontaneous, and entropy-increasing nature on CFS. In addition, the CFS could be separated by an external magnetic field, recycled, and reused without any significant loss in the adsorption capacity of CAPC. Based on these excellent performances, there is potential that CFS can be considered as a proficient and economically suitable material for the CAPC removal from the water environment. [ABSTRACT FROM AUTHOR]

The removal of organic contaminants from water poses a significant challenge that can be tackled by integrating adsorption and photocatalytic degradation functions in a single architecture. However, traditional powdery nanomaterials face challenges in separation and lack synergistic function, hampering their practical application. This study presents a one-step hydrothermal synthesis of a convenient recyclable Bi 2 O 2.33 /Bi 2 O 3 @ECNF (electrospun carbon nanofibers), which combines both adsorption and photocatalytic performance. The Bi 2 O 2.33 /Bi 2 O 3 exhibits high adsorption removal of methyl orange (MO), reaching 94.56 % and a maximum capacity of 213.13 mg g−1. Additionally, the Bi 2 O 2.33 /Bi 2 O 3 shows a high charge transfer rate, strong redox ability, and efficient removal of Rhodamine B (RhB) at 83.01 %. Loading the Bi 2 O 2.33 /Bi 2 O 3 on lightweight carbon fibers allows for easy recycling. The Bi 2 O 2.33 /Bi 2 O 3 @ECNF demonstrates excellent stability and reusability, with a removal rate of 87.37 % for tetracycline hydrochloride (TCH) at high concentrations. This work presents a promising solution for the practical application of photocatalysts by overcoming the limitations of single photocatalysts and minimizing secondary pollution from single adsorbents. [Display omitted] [ABSTRACT FROM AUTHOR]