Search

The synthesis and employment of volatile toxic compounds as chemical weapons with a large-scale destructive power has introduced a new insidious threat over the last century. In this framework, the development of wearable sensing tools represents a critical point within the security field, in order to provide early alarm systems. Herein, a novel wearable electrochemical biosensor was developed for the rapid and on-site detection of mustard agents. Since a chemical attack is typically carried out by spraying these volatile agents into air, the sensor was designed in order to be able to measure mustard agents directly in the aerosol phase, further than in the liquid phase. The electrodes were screen-printed onto a filter paper support, which allowed to harness the porosity of paper to pre-load all the needed reagents into the cellulose network, and hence to realise an origami-like and reagent-free device. Mustard agent detection was carried out by monitoring their inhibitory effects toward the choline oxidase enzyme, through the amperometric measurement of the enzymatic by-product hydrogen peroxide. A carbon black/Prussian blue nanocomposite was used as a bulk-modifier of the conductive graphite ink constituting the working electrode, allowing for the electrocatalysis of the hydrogen peroxide reduction. After having verified the detecting capability toward a mustard agent simulant, the applicability of the resulting origami-like biosensor was demonstrated for the rapid and real-time detection of real sulfur mustard, obtaining limits of detection equal to 1 mM and 0.019 g·min/m3 for liquid and aerosol phase, respectively.

SARS, a new type of respiratory disease caused by SARS-CoV, was identified in 2003 with significant levels of morbidity and mortality. The recent pandemic of COVID-19, caused by SARS-CoV-2, has generated even greater extents of morbidity and mortality across the entire world. Both SARS-CoV and SARS-CoV-2 spreads through the air in the form of droplets and potentially smaller droplets (aerosols) via exhaling, coughing, and sneezing. Direct detection from such airborne droplets would be ideal for protecting general public from potential exposure before they infect individuals. However, the number of viruses in such droplets and aerosols is too low to be detected directly. A separate air sampler and enough collection time (several hours) are necessary to capture a sufficient number of viruses. In this work, we have demonstrated the direct capture of the airborne droplets on the paper microfluidic chip without the need for any other equipment. 10% human saliva samples were spiked with the known concentration of SARS-CoV-2 and sprayed to generate liquid droplets and aerosols into the air. Antibody-conjugated submicron particle suspension is then added to the paper channel, and a smartphone-based fluorescence microscope isolated and counted the immunoagglutinated particles on the paper chip. The total capture-to-assay time was

Immunoassays and high-performance liquid chromatography (HPLC) coupled with mass spectrometry (MS) are both widely used methods for drug screening in toxicology. We investigated an alternative approach for rapid drug screening: paper spray MS (PS-MS). In paper spray, the biofluid sample is spotted onto a paper substrate. Upon application of a spray solvent and an electric potential, extraction and ionization occur directly from the paper without any need for additional sample preparation. We developed two paper spray high-resolution MS/MS targeted drug screening assays using a quadrupole-orbitrap mass spectrometer, one the positive ion mode and one in the negative ion mode. In the positive ion mode, over 130 drugs and drug metabolites were semi-quantitatively screened at sub-toxic concentrations in a single 2.5 min analysis. Limits of detection and calibration performances for each target compound are reported. The PS-MS/MS assay was tested on authentic postmortem specimens, and its screening ability and semi-quantitative performance were evaluated against independent LC-MS-MS screening and confirmation assays with good agreement. The paper spray MS/MS showed good qualitative agreement with LC-MS-MS; the true positive rate of paper spray MS/MS was 92%, and the true negative rate was over 98%. The quantitative results between the two methods were also acceptable for a screening application; Passing-Bablok regression yielded a slope of 1.17 and a Pearson's correlation coefficient of 0.996. A separate PS-MS/MS negative ion screening method was also developed for a small panel of barbiturates and structural analogs, demonstrating its potential for acidic drug detection and screening.

Pesticides are largely used at worldwide level to improve food production, fulfilling the needs of the global population which is increasing year by year. Although pesticides are beneficial for crop production, their extensive use has serious consequences for the pollution of the produced food as well as for soil and groundwaters. Indeed, it is reported that 50% of sprayed pesticides reach different destinations other than their target species, including soil, surface waters, and groundwaters. For this reason, we developed a flower-like origami paper-based device for pesticides detection in aerosol phase for precision agriculture. In detail, the paper-based electrochemical platform detects paraoxon, 2,4-dichlorophenoxyacetic acid, and glyphosate at ppb levels by measuring their inhibitory activity towards three different enzymes namely butyrylcholinesterase, alkaline phosphatase, and peroxidase enzyme, respectively. This integrated electrochemical device is composed of three office paper-based screen-printed electrodes and filter paper-based pads loaded with enzymes and enzymatic substrates. The pesticide detection is carried out by measuring through chronoamperometric technique the initial and residual enzymatic activity by using a smartphone-assisted potentiostat and evaluating the percentage of inhibition, proportional to the amount of aerosolized pesticides. This paper-based device was able to detect the three classes of pesticides in aerosol phase with limits of detection equal to 30 ppb, 10 ppb, and 2 ppb, respectively for 2,4-D, glyphosate, and paraoxon.

To study the relationship between exposure to airborne particles in a pulp and paper mill and markers of inflammation and coagulation in blood. Personal sampling of inhalable dust was performed for 72 subjects working in a Swedish pulp and paper mill. Stationary measurements were used to study concentrations of total dust, respirable dust, PM10 and PM2.5, the particle surface area and the particle number concentrations. Markers of inflammation, interleukins (IL-1b, IL-6, IL-8, and IL-10), C-reactive protein (CRP), serum amyloid A (SAA), and fibrinogen and markers of coagulation factor VIII, von Willebrand, plasminogen activator inhibitor, and D-dimer were measured in plasma or serum. Sampling was performed on the last day of the work free period of 5 days, before and after the shift the first day of work and after the shifts the second and third day. In a mixed model analysis, the relationship between particulate exposures and inflammatory markers was determined. Sex, age, smoking, and BMI were included as covariates. The average 8-h time-weighted average (TWA) air concentration levels of inhalable dust were 0.30 mg/m(3), range 0.005-3.3 mg/m(3). The proxies for average 8-h TWAs of respirable dust were 0.045 mg/m(3). Significant and consistent positive relations were found between several exposure metrics (PM 10, total and inhalable dust) and CRP, SAA and fibrinogen taken post-shift, suggesting a dose-effect relationship. This study supports a relationship between occupational particle exposure and established inflammatory markers, which may indicate an increased risk of cardiovascular disease. Funding Agencies|Swedish Research Council for Health, Working Life and Welfare [2006-0152]

With an established role in cystic fibrosis and bronchiectasis, nebulized antibiotics are increasingly being used to treat respiratory infections in critically ill invasively mechanically ventilated adult patients. Although there is limited evidence describing their efficacy and safety, in an era when there is a need for new strategies to enhance antibiotic effectiveness because of a shortage of new agents and increases in antibiotic resistance, the potential of nebulization of antibiotics to optimize therapy is considered of high interest, particularly in patients infected with multidrug-resistant pathogens. This Position Paper of the European Society of Clinical Microbiology and Infectious Diseases provides recommendations based on the Grading of Recommendations Assessment, Development and Evaluation (GRADE) methodology regarding the use of nebulized antibiotics in invasively mechanically ventilated adults, based on a systematic review and meta-analysis of the existing literature (last search July 2016). Overall, the panel recommends avoiding the use of nebulized antibiotics in clinical practice, due to a weak level of evidence of their efficacy and the high potential for underestimated risks of adverse events (particularly, respiratory complications). Higher-quality evidence is urgently needed to inform clinical practice. Priorities of future research are detailed in the second part of the Position Paper as guidance for researchers in this field. In particular, the panel identified an urgent need for randomized clinical trials of nebulized antibiotic therapy as part of a substitution approach to treatment of pneumonia due to multidrug-resistant pathogens.

We demonstrate the use of patterned aerosol adhesives to construct both planar and nonplanar 3D paper microfluidic devices. By spraying an aerosol adhesive through a metal stencil, the overall amount of adhesive used in assembling paper microfluidic devices can be significantly reduced. We show on a simple 4-layer planar paper microfluidic device that the optimal adhesive application technique and device construction style depends heavily on desired performance characteristics. By moderately increasing the overall area of a device, it is possible to dramatically decrease the wicking time and increase device success rates while also reducing the amount of adhesive required to keep the device together. Such adhesive application also causes the adhesive to form semi-permanent bonds instead of permanent bonds between paper layers, enabling single-use devices to be non-destructively disassembled after use. Nonplanar 3D origami devices also benefit from the semi-permanent bonds during folding, as it reduces the likelihood that unrelated faces may accidently stick together. Like planar devices, nonplanar structures see reduced wicking times with patterned adhesive application vs uniformly applied adhesive.

One limitation in the growing field of ambient or direct analysis methods is reduced selectivity caused by the elimination of chromatographic separations prior to mass spectrometric analysis. We explored the use of high-field asymmetric waveform ion mobility spectrometry (FAIMS), an ambient pressure ion mobility technique, to separate the closely related opiate isomers of morphine, hydromorphone, and norcodeine. These isomers cannot be distinguished by tandem mass spectrometry. Separation prior to MS analysis is, therefore, required to distinguish these compounds, which are important in clinical chemistry and toxicology. FAIMS was coupled to a triple quadrupole mass spectrometer, and ionization was performed using either a pneumatically assisted heated electrospray ionization source (H-ESI) or paper spray, a direct analysis method that has been applied to the direct analysis of dried blood spots and other complex samples. We found that FAIMS was capable of separating the three opiate structural isomers using both H-ESI and paper spray as the ionization source.

Human exposure to particulate matter (PM) air pollution has been linked with respiratory, cardiovascular, and neurodegenerative diseases, in addition to various cancers. Consistent among all of these associations is the hypothesis that PM induces inflammation and oxidative stress in the affected tissue. Consequently, a variety of assays have been developed to quantify the oxidative activity of PM as a means to characterize its ability to induced oxidative stress. The vast majority of these assays rely on high-volume, fixed-location sampling methods due to limitations in assay sensitivity and detection limit. As a result, our understanding of how personal exposure contributes to the intake of oxidative air pollution is limited. To further this understanding, we present a microfluidic paper-based analytical device (μPAD) for measuring PM oxidative activity on filters collected by personal sampling. The μPAD is inexpensive to fabricate and provides fast and sensitive analysis of aerosol oxidative activity. The oxidative activity measurement is based on the dithiothreitol assay (DTT assay), uses colorimetric detection, and can be completed in the field within 30 min following sample collection. The μPAD assay was validated against the traditional DTT assay using 13 extracted aerosol samples including urban aerosols, biomass burning PM, cigarette smoke, and incense smoke. The results showed no significant differences in DTT consumption rate measured by the two methods. To demonstrate the utility of the approach, personal samples were collected to estimate human exposures to PM from indoor air, outdoor air on a clean day, and outdoor air on a wildfire-impacted day in Fort Collins, CO. Filter samples collected on the wildfire day gave the highest oxidative activity on a mass normalized basis, whereas typical ambient background air showed the lowest oxidative activity.

This review of the evidence of the health effects of air pollutants focuses on research conducted in Ontario. Seven key Ontario studies are cited. These findings are highly significant for people living in the Great Lakes basin (and particularly the Windsor-Quebec corridor), where high levels of certain air pollutants (eg, ground-level ozone and ultra-fine particles) occur more frequently than in other parts of Canada. The issue is a serious one, requiring an integrated and comprehensive approach by many stakeholders, including the active involvement of organized medicine. It is important that the health effects of these air pollutants are understood. Governments must act to reduce emission levels through statue and regulation bolstered by noncompliance penalties.The findings of research have included the following: in a Toronto study, a 2% to 4% excess of respiratory deaths were attributable to pollutant levels; children living in rural Ontario communities with the highest levels of airborne acids were significantly more likely to report at least one episode of bronchitis, as well as to show decreases in lung function; and have been linked to increases in pollutants, emergency room visits and hospitalizations in Ontario.Every Ontarian is affected by air pollutants, although he or she may be unaware of the asymptomatic effects such as lung and bronchial inflammation. This health problem is preventable; while physicians know of the adverse health impacts of air pollution and they are concerned, individually they now focus on the treatment of symptoms. The major recommendations of the report are as follows:* Enactment of more stringent sulphur and nitrogen oxide emission limits, including a provincewide sulphur dioxide reduction of 75% from current cap levels, and the maximum allowable nitrogen oxides emission limits of 6000 tonnes annually from Ontario Hydro.* New transportation sector emission limits that should include California-level standards for light and heavy duty vehicles, reductions from off-road engines, an expanded vehicle inspection and maintenance program, and tougher standards for sulphur-in-fuel content.* Petitioning the United States Environmental Protection Agency administrator under Section 115 of the United States Clear Air Act to require reductions in the American emission of sulphur dioxide and nitrogen oxides, which damage the health of Canadian residents and their environment.* Physician advice to patients about the risks of smog exposure, physician support for more health effects research on air pollution, and physician promotion of the development of air pollution-related health education materials.The recommendations discussed in this paper will, if acted upon, lead to a significant reduction in the overall burden of illness from air pollutants, especially in children and the elderly. These recommendations have been selected from a review of recommendations made by various authorities, and are those that the OMA feels a particular responsibility to support.

Radon gas was allowed to accumulate in its radium source and then injected into a 36 m(3) test room, resulting in an initial radon concentration of 15 kBq m(-3). Filter papers were used to collect the short-lived radon progeny and thus to measure the Potential Alpha Energy Concentration (PAEC) in-situ in the year 1984 at different times and conditions according to the experimental design. The radon progeny collected on the filter papers were studied as a function of aerosol particle concentration ranging from 10(2)-10(5) particles cm(-3) in three different experiments. The highest aerosol particle concentration was generated by indoor cigarette smoking. Those filters were stored after the experiment, and were used after 16 years to study the activity of the radon long-lived alpha emitter progeny, (210)Po (T(1/2)=138 days). This isotope is separated from the short-lived progeny by (210)Pb beta emitter with 22.3 years half-life. After 16 years' storage of these filters, each filter paper was sandwiched and wrapped between two CR-39 nuclear track detectors, to put the detectors in contact with the surfaces of different filters, for 337 days. Correlation between the PAEC measured using filter papers in the year 1984 and the activity of long-lived alpha emitter (210)Po on the same filter papers measured in the year 2000 were studied. The results of the (210)Po activity showed a very good correlation of 0.92 with the PAEC 16 years ago. The results also depict that the PAEC and (210)Po activity in indoor air increased with the increase of aerosol particle concentration, which shows the attachment of short-lived radon progeny with the aerosol particles. The experiment proves that indoor cigarette smoking is a major source of aerosol particles carrying radon progeny and, thus, indoor cigarette smoking is an additional source of internal radiation hazard to the occupants whether smoker or non-smoker.

It is essential to understand the data quality of 10+ year OMI ozone product and impacts of the “Row Anomaly (RA)”. We validate the OMI ozone-profile (PROFOZ) product from Oct. 2004 to Dec. 2014 against ozonesonde observations globally. Generally, OMI has good agreement with ozonesondes. The spatiotemporal variation of retrieval performance suggests the need to improve OMI’s radiometric calibration especially during the post-RA period to maintain the long-term stability.

Airborne particulate matter (PM) pollution significantly impacts human health, but the cellular mechanisms of PM-induced toxicity remain poorly understood. A leading hypothesis on the effects of inhaled PM involves the generation of cellular oxidative stress. To investigate PM-induced oxidative stress, analytical methods have been developed to study the chemical oxidation of dithiothreitol (DTT) in the presence of PM. Although DTT readily reacts with several forms of reactive oxygen species, this molecule is not endogenously produced in biological systems. Glutathione (GSH), on the other hand, is an endogenous antioxidant that is produced throughout the body and is directly involved in combating oxidative stress in the lungs and other tissues. We report here a new method for measuring aerosol oxidative activity that uses silver nanoparticle (AgNP) aggregation coupled to glutathione (GSH) oxidation in a paper-based analytical device. In this assay, the residual reduced GSH from the oxidation of reduced GSH to its disulfide induces the aggregation of AgNPs on a paper-based analytical device, which produces a reddish-brown product. Two methods for aerosol oxidative reactivity are presented: one based on change in color intensity using a traditional paper-based techniques and one based on the length of the color product formed using a distance-based device. These methods were validated against traditional spectroscopic assays for DTT and GSH that employ Elman's reagent. No significant difference was found between the levels measured by all three GSH methods (our two paper-based devices and the traditional method) at the 95% confidence level. PM reactivity towards GSH was less than towards DTT most likely due to the difference in the oxidation potential between the two molecules.

During five campaigns at sea and 11 on land in 2001–2007, aerosols were measured in the coastal zone and over the open sea in the Gdansk Basin (southern Baltic). Sea salt concentrations were high both over Gdynia (2.0–12.2 μ g m − 3 ) and at sea (1.3–14.5 μ g m − 3 ). The intensity of the generation and transport of marine aerosols increased exponentially with wind speeds > 5 m s − 1 over land and > 3 m s − 1 over the Gulf of Gdansk, this being most noticeable with Baltic and oceanic advection. Sea breezes were conducive to the transport of marine aerosols over land areas. The sea was also the origin of both sea salt and non-sea salt sulphate aerosols. An interesting increase in the proportion of non-sea salt-related sulphates (86.7%) was observed in spring, when the biological processes in the sea were more intense.

Taste of a pharmaceutical formulation is an important parameter for the effectiveness of pharmacotherapy. Cetirizine dihydrochloride (CET) is a second-generation antihistamine that is commonly administered in allergy treatment. CET is characterized by extremely bitter taste and it is a great challenge to successfully mask its taste; therefore the goal of this work was to formulate and characterize the microparticles obtained by the spray drying method with CET and poly(butyl methacrylate-co-(2-dimethylaminoethyl) methacrylate-co-methyl methacrylate 1:2:1 copolymer (Eudragit E PO) as a barrier coating. Assessment of taste masking by the electronic tongue has revealed that designed formulations created an effective taste masking barrier. Taste masking effect was also confirmed by the in vivo model and the in vitro release profile of CET. Obtained data have shown that microparticles with a drug/polymer ratio (0.5:1) are promising CET carriers with efficient taste masking potential and might be further used in designing orodispersible dosage forms with CET.

Brewer spectrophotometers are widely used instruments which perform spectral measurements of the direct, the scattered and the global solar UV irradiance. By processing these measurements a variety of secondary products can be derived such as the total columns of ozone (TOC), sulfur dioxide and nitrogen dioxide and aerosol optical properties. Estimating and limiting the uncertainties of the final products is of critical importance. High-quality data have a lot of applications and can provide accurate estimations of trends.

More than 2 years of columnar atmospheric aerosol measurements (2006–2009) at the Tamanrasset site (22.79° N, 5.53° E, 1377 m a.s.l.), in the heart of the Sahara, are analysed. Aerosol Robotic Network (AERONET) level 2.0 data were used. The KCICLO (K is the name of a constant and ciclo means cycle in Spanish) method was applied to a part of the level 1.5 data series to improve the quality of the results. The annual variability of aerosol optical depth (AOD) and Ångström exponent (AE) has been found to be strongly linked to the convective boundary layer (CBL) thermodynamic features. The dry-cool season (autumn and winter) is characterized by a shallow CBL and very low mean turbidity (AOD ~ 0.09 at 440 nm, AE ~ 0.62). The wet-hot season (spring and summer) is dominated by high turbidity of coarse dust particles (AE ~ 0.28, AOD ~ 0.39 at 440 nm) and a deep CBL. The aerosol-type characterization shows desert mineral dust as the prevailing aerosol. Both pure Saharan dust and very clear sky conditions are observed depending on the season. However, several case studies indicate an anthropogenic fine mode contribution from the industrial areas in Libya and Algeria. The concentration weighted trajectory (CWT) source apportionment method was used to identify potential sources of air masses arriving at Tamanrasset at several heights for each season. Microphysical and optical properties and precipitable water vapour were also investigated. The AERONET sun photometer at Tamanrasset has been calibrated within AERONET-EUROPE TNA supported by the PHOTONS and RIMA networks and partially financed by the European Community – Research Infrastructure Action under the Seventh Framework Programme (FP7/2007-2013) “Capacities” specific programme for Integrating Activities, ACTRIS grant agreement no. 262254. Financial support from the Spanish MINECO (projects CGL2011-23413, CGL2012-33576 and CGL2012-37505) is also gratefully acknowledged. J. M. Baldasano and S. Basart acknowledge the Supercomputación y eCiencia project (CSD2007-0050) from the Consolider-Ingenio 2010 and Severo Ochoa (SEV-2011-00067) programs of the Spanish Government.

This paper presents the preliminary results of nocturnal Aerosol Optical Depth (τa) and Angström Exponent (α) obtained from a new lunar photometer prototype, trade name Cimel CE-318U. Due to the variation of the moon's illumination inherent to the lunar cycle, the typical Langley-plot Method used in solar photometry to calibrate these instruments cannot be applied. In this paper, we propose three different methods to carry out the lunar-photometer calibration. In order to validate the results, we have selected three events which encompass seven nights and ten days under different atmospheric conditions, including several saharan dust intrusions episodes. Method#1 is introduced in this work as a modification of the usual Langley Method. The Aeronet sunphotometer at Izana has been calibrated within ˜ AERONET-EUROPE TNA supported by the European Community – Research Infrastructure Action under the FP7 “Capacities” specific programme for Integrating Activities, ACTRIS Grant Agreement no. 262254.

A sensitivity study of aerosol retrievals to the geometrical configuration of the ground-based sky radiometer observations is carried out through inversion tests. Specifically, this study is focused on principal plane and almucantar observations, since these geometries are employed in AERONET (AErosol RObotic NETwork). The following effects have been analyzed with simulated data for both geometries: sensitivity of the retrieval to variability of the observed scattering angle range, uncertainties in the assumptions of the aerosol vertical distribution, surface reflectance, possible instrument pointing errors, and the effects of the finite field of view. Financial support was provided by the Spanish CICYT (CGL2009-09740 and CGL2011-23413, CGL2011-13085-E). The research leading to these results was supported by funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 262254 [ACTRIS]. We also thank the Environmental Council of the CyL Regional Government (Consejería de Medio Ambiente, Junta de Castilla y León) for supporting this research.

The shortwave radiative forcing (1F) and the radiative forcing efficiency (1Feff) of natural and anthropogenic aerosols have been analyzed using estimates of radiation both at the Top (TOA) and at the Bottom Of Atmosphere (BOA) modeled based on AERONET aerosol retrievals. Six main types of atmospheric aerosols have been compared (desert mineral dust, biomass burning, urbanindustrial, continental background, oceanic and free troposphere) in similar observational conditions (i.e., for solar zenith angles between 55 and 65 ) in order to compare the nearly same solar geometry. We acknowledge to the MEC (Ministry of Education and Science, Spain) for the next supports: projects CGL2007-66477-C02-02/CLI, CGL2008-04740/CLI and CGL2010-21366-C04-01.

The incidence of microbes in the nasal cavities of workers in three paper and board mills was investigated. A total of 234 persons exposed to microbial aerosols and splashes from paper machine wires and debarker drums formed the exposed group. The control group consisted of 294 workers from the dry working areas: the winding and packing sections. Chi-square analysis was used to test the differences in the frequency of microbial incidence and various symptoms between the exposed and control groups. The nasal cavities of many workers, particularly workers in the debarkers, proved to be contaminated by Klebsiella pneumoniae, other coliforms, yeasts, and molds; usually only one microbe was involved, but sometimes two or several species were found. Nasal bacteria and yeasts were largely derived from the mill and debarker air; the microbes in the air came mainly from process waters. Lack of association of nasopharyngeal symptoms with either exposure to aerosols or nasal microbial contamination was interpreted as an indication of host defenses that were adequate to protect workers from harmful microbial colonization in paper mill environments.

The widespread use of inhaled corticosteroids (ICS) since the early 1970's has meant that asthma is generally better controlled in comparison with previous decades. Nevertheless, recent patient interview surveys indicate that there is still a lot to gain in terms of abolishing daytime and nocturnal symptoms, and asthma exacerbations. It is important to use the terms asthma 'control' and asthma 'severity' in a correct way. Whereas asthma control reflects fluctuation in symptoms and lung function (or lack of them) over time, asthma severity reflects both asthma control and the need for medication. Thus, 'severity' is a property of the disease which reflects the degree of pathophysiological abnormality, whereas 'control' refers to the reduction of the clinical manifestations of disease achieved by treatment - thereby reflecting the adequacy of treatment. This introductory review, the first of a series of review papers to be published in this journal by the ADMIT team (see Appendix), discusses briefly our present knowledge of asthma control, its components, factors that may limit patients' ability to achieve optimal asthma control, and instruments to measure asthma control.