Search

The paper presents a new open-source visualization system, named ReVisE, aimed to provide interactive visualization of large datasets, which are results of complex numerical simulations. These datasets are hosted on a remote server or a supercomputer. The design of the system is briefly described. Dataset representation, proposed for interactive visualization and implemented in the system, is discussed. The effectiveness of our approach is confirmed by results of performance measurements on test and real-life large datasets. A comparison with other visualization systems is presented. Future plans of system development are outlined.

A new Interpolation based Reversible Data Hiding (IRDH) scheme is reported in this paper. For different applications of an IRDH scheme to the digital image, video, multimedia, big-data and biological data, the embedding capacity requirement usually varies. Disregarding this important consideration, existing IRDH schemes do not offer a better embedding rate-distortion performance for varying size payloads. To attain this varying capacity requirement with our proposed adaptive embedding, we formulate a capacity control parameter and propose to utilize it to determine a minimum set of embeddable bits in a pixel. Additionally, we use a logical (or bit-wise) correlation between the embeddable pixel and estimated versions of an embedded pixel. Thereby, while a higher range between an upper and lower limit of the embedding capacity is maintained, a given capacity requirement within that limit is also attained with a better-embedded image quality. Computational modeling of all new processes of the scheme is presented, and performance of the scheme is evaluated with a set of popular test-images. Experimental results of our proposed scheme compared to the prominent IRDH schemes have recorded a significantly better-embedding rate-distortion performance.

Dynamic solar shading has the potential to dramatically reduce the energy consumption in buildings while at the same time improving the thermal and visual comfort of its occupants. Many new typologies of shading systems that have appeared recently, but it is difficult to compare those new systems to existing typologies due to control algorithm being rule-based as opposed to performance driven. Since solar shading is a design problem, there is no single right answer. What is the metric to determine if a system has reached its optimal kinematic design? Shading solutions should come from a thorough iterative and comparative process. This paper provides an original and flexible framework for the design and performance optimization of dynamic shading systems based on interpolation of simulations and global minimization. The methodology departs from existing rule-based strategies and applies to existing and to complex shading systems with multiple degree-of-freedom mobility. The strategy for control is centered on meeting comfort targets for work plane illuminance while minimizing the energy needed to operate space. The energy demand for thermal comfort and work plane daylight quantity (illuminance) are evaluated with Radiance and EnergyPlus based on local weather data. Applied to a case study of three typologies of dynamic shading, the results of the methodology inform the usefulness and quality of each degree-of-freedom of the kinematic systems. The case study exemplifies the iterative benefits of the methodology by providing detailed analytics on the behavior of the shades. Designers of shading systems can use this framework to evaluate their design and compare them to existing shading systems. This allows creativity to be guided so that eventually building occupants benefit from the innovation in the field.

Analytical CT reconstruction is popular in practice because of its computational efficiency, but it suffers from low reconstruction quality when an insufficient number of projections are used. To address this issue, this paper presents a new analytical method of backprojection Wiener deconvolution (BPWD). BPWD executes backprojection first, and then applies a Wiener deconvolution to the whole backprojected image. The Wiener filter is derived from a ramp filter, enabling the proposed approach to perform reconstruction and denoising simultaneously. The use of a filter after backprojection does not differentiate between real sampled projections and interpolated ones, introducing reconstruction errors. Therefore a weighted ramp filter was applied to increase the contribution of real sampled projections in the reconstruction, thus improving reconstruction quality. Experiments on synthetic data and real phase-contrast x-ray images showed that the proposed approach yields better reconstruction quality compared to the classical filtered backprojection (FBP) method, with comparable reconstruction speed Refereed/Peer-reviewed

The availability of digital X-ray detectors, together with advances in reconstruction algorithms, creates an opportunity for bringing 3D capabilities to conventional radiology systems. The downside is that reconstruction algorithms for non-standard acquisition protocols are generally based on iterative approaches that involve a high computational burden. The development of new flexible X-ray systems could benefit from computer simulations, which may enable performance to be checked before expensive real systems are implemented. The development of simulation/reconstruction algorithms in this context poses three main difficulties. First, the algorithms deal with large data volumes and are computationally expensive, thus leading to the need for hardware and software optimizations. Second, these optimizations are limited by the high flexibility required to explore new scanning geometries, including fully configurable positioning of source and detector elements. And third, the evolution of the various hardware setups increases the effort required for maintaining and adapting the implementations to current and future programming models. Previous works lack support for completely flexible geometries and/or compatibility with multiple programming models and platforms. In this paper, we present FUX-Sim, a novel X-ray simulation/reconstruction framework that was designed to be flexible and fast. Optimized implementation for different families of GPUs (CUDA and OpenCL) and multi-core CPUs was achieved thanks to a modularized approach based on a layered architecture and parallel implementation of the algorithms for both architectures. A detailed performance evaluation demonstrates that for different system configurations and hardware platforms, FUX-Sim maximizes performance with the CUDA programming model (5 times faster than other state-of-the-art implementations). Furthermore, the CPU and OpenCL programming models allow FUX-Sim to be executed over a wide range of hardware platforms.

The scientific demand for more accurate modeling of the climate system calls for more computing power to support higher resolutions, inclusion of more component models, more complicated physics schemes, and larger ensembles. As the recent improvements in computing power mostly come from the increasing number of nodes in a system and the integration of heterogeneous accelerators, how to scale the computing problems onto more nodes and various kinds of accelerators has become a challenge for the model development. This paper describes our efforts on developing a highly scalable framework for performing global atmospheric modeling on heterogeneous supercomputers equipped with various accelerators, such as GPU (Graphic Processing Unit), MIC (Many Integrated Core), and FPGA (Field Programmable Gate Arrays) cards. We propose a generalized partition scheme of the problem domain, so as to keep a balanced utilization of both CPU resources and accelerator resources. With optimizations on both computing and memory access patterns, we manage to achieve around 8 to 20 times speedup when comparing one hybrid GPU or MIC node with one CPU node with 12 cores. Using a customized FPGA-based data-flow engines, we see the potential to gain another 5 to 8 times improvement on performance. On heterogeneous supercomputers, such as Tianhe-1A and Tianhe-2, our framework is capable of achieving ideally linear scaling efficiency, and sustained double-precision performances of 581 Tflops on Tianhe-1A (using 3750 nodes) and 3.74 Pflops on Tianhe-2 (using 8644 nodes). Our study also provides an evaluation on the programming paradigm of various accelerator architectures (GPU, MIC, FPGA) for performing global atmospheric simulation, to form a picture about both the potential performance benefits and the programming efforts involved.

The size of realistic cardiac tissue models has been limited by their high computational demands. In particular, the Luo-Rudy phase II membrane model, used to simulate a thin sheet of ventricular tissue with arrays of coupled ventricular myocytes, is usually limited to 100/spl times/100 arrays. The authors introduce a new numerical method based on domain decomposition and a priority queue integration scheme which reduces the computational cost by a factor of 3-17. In the standard algorithm all the nodes advance with the same time step /spl Delta/t, whose size Is limited by the time scale of activation. However, at any given time, many regions may he inactive and do not require the same small /spl Delta/t and consequent extensive computations. Hence, adjusting /spl Delta/t locally is a key factor in improving computational efficiency, since most of the computing time is spent calculating ionic currents. This paper proposes an efficient adaptive numerical scheme for integrating a two-dimensional (2-D) propagation model, by incorporating local adjustments of /spl Delta/t. In this method, alternating direction Cooley-Dodge and Rush-Larsen methods were used for numerical integration. Between consecutive integrations over the whole domain using an implicit method, the model was spatially decomposed into many subdomains, and /spl Delta/t adjusted locally. The Euler method was used for numerical integration in the subdomains. Local boundary values were determined from the boundary mesh elements of the neighboring subdomains using linear interpolation. Because /spl Delta/t was defined locally, a priority queue was used to store and order nest update times for each subdomain. The subdomain with the earliest update time was given the highest priority and advanced first. This new method yielded stable solutions with relative errors less than 1% and reduced computation time by a factor of 3-17 and will allow much larger (e.g. 500/spl times/500) models based on realistic membrane kinetics and realistic dimensions to simulate reentry, triggered activity, and their interactions.