Search

Abstract Different on‐chip antennas in Complementary Metal‐Oxide‐Semiconductor (CMOS) technology for THz detector and source are proposed. Firstly, the size of these antennas is estimated with an equivalent CMOS substrate model. Finally, through electromagnetic simulation, the structure optimised and slotted the on‐chip antenna to realise multi‐band detection, miniaturised detection, and miniaturised source. For the THz detector, multi‐band antennas with a dual‐ring structure and miniaturised antennas with circular and diamond structures are designed. At the frequency of 300, 600, and 800 GHz, the gain of the ring antennas is 5.7, 7.2, and 7.2 dBi, respectively. The gain of the circular and diamond antenna is 5.3 and 5.96 dBi at 300 GHz. For the THz source, rectangular‐slot and T‐slot antennas are designed at the frequency of 300 GHz and the gain of the rectangular‐slot and T‐slot antennas is 2.92 and 3.87 dBi, respectively. Multi‐band antennas and miniaturised antennas effectively save the occupation area and improve the performance of the THz system. The effectiveness of antennas is verified by the measurement of the detector and the source, which indicates that the proposed on‐chip antennas have potential prospects for CMOS THz applications.

Different on‐chip antennas in Complementary Metal‐Oxide‐Semiconductor (CMOS) technology for THz detector and source are proposed. Firstly, the size of these antennas is estimated with an equivalent CMOS substrate model. Finally, through electromagnetic simulation, the structure optimised and slotted the on‐chip antenna to realise multi‐band detection, miniaturised detection, and miniaturised source. For the THz detector, multi‐band antennas with a dual‐ring structure and miniaturised antennas with circular and diamond structures are designed. At the frequency of 300, 600, and 800 GHz, the gain of the ring antennas is 5.7, 7.2, and 7.2 dBi, respectively. The gain of the circular and diamond antenna is 5.3 and 5.96 dBi at 300 GHz. For the THz source, rectangular‐slot and T‐slot antennas are designed at the frequency of 300 GHz and the gain of the rectangular‐slot and T‐slot antennas is 2.92 and 3.87 dBi, respectively. Multi‐band antennas and miniaturised antennas effectively save the occupation area and improve the performance of the THz system. The effectiveness of antennas is verified by the measurement of the detector and the source, which indicates that the proposed on‐chip antennas have potential prospects for CMOS THz applications. [ABSTRACT FROM AUTHOR]

Imperfect Channel State Information at the Transmitter (CSIT) is inevitable in modern wireless communication networks, and results in severe multi-user interference in multi-antenna Broadcast Channel (BC). While the capacity of multi-antenna (Gaussian) BC with perfect CSIT is known and achieved by Dirty Paper Coding (DPC), the capacity and the capacity-achieving strategy of multi-antenna BC with imperfect CSIT remain unknown. Conventional approaches therefore rely on applying communication strategies designed for perfect CSIT to the imperfect CSIT setting. In this work, we break this conventional routine and make two major contributions. First, we show that linearly precoded Rate-Splitting (RS), relying on the split of messages into common and private parts and linear precoding at the transmitter, and successive interference cancellation at the receivers, can achieve larger rate region than DPC in multi-antenna BC with partial CSIT. Second, we propose a novel scheme, denoted as Dirty Paper Coded Rate-Splitting (DPCRS), that relies on RS to split the user messages into common and private parts, and DPC to encode the private parts. We show that the rate region of DPCRS in Multiple-Input Single-Output (MISO) BC with partial CSIT is enlarged beyond that of conventional DPC and that of linearly precoded RS. Gaining benefits from the capability of RS to partially decode the interference and partially treat interference as noise, DPCRS is less sensitive to CSIT inaccuracies, networks loads and user deployments compared with DPC and other existing transmission strategies. [ABSTRACT FROM AUTHOR]

The feasibility of electrically conductive paper as a low-cost and eco-friendly alternative to copper is presented for application as an antenna conductor in UHF radio-frequency identification (RFID) systems. The conductivity of the paper is determined to be 50 S/m and the effect of such a low conductivity on the radiation performance of a half-wavelength dipole is investigated through simulation and experimental measurements. The radiation efficiency of a dipole cut from a 0.4 mm thick conductive paper sheet is measured to be 5.0%, which translates to an RFID tag read range of 22% of that obtained using copper. This performance is deemed unacceptable for most antenna applications. However, through simulation a conductivity of 500 S/m is identified as a reasonable target for the developers of conductive paper as the current distribution and terminal properties of the resulting antenna become similar to those observed when using copper. The radiation efficiency is projected at 56 % in this case, resulting in an RFID read range of 73% of that obtained using copper. [ABSTRACT FROM PUBLISHER]

A complete characterization of the inkjet printing process using metallic nanoparticle inks on a paper substrate for microwave frequencies up to 12.5 GHz as well as its application to low-cost, high gain and wideband antenna design are demonstrated in this work. Laser and heat sintering of metallic nanoparticles are compared on paper substrate for the first time which demonstrate immense cost and time benefits of laser sintering. The antennas fabricated using the characterized process include a Vivaldi for the UWB band which exhibits a significantly higher gain of up to 8 dBi as compared to the currently published inkjet printed antennas, and a novel slow-wave log periodic dipole array which employs a new miniaturization technique to show 20% width reduction. [ABSTRACT FROM PUBLISHER]

This paper deals with a low-cost method for the assembly of flexible substrate antennas and UHF RF identification silicon (Si) chips. Such a method exploits a magnetic coupling mechanism, thus not requiring for galvanic contacts between the Si chip and antenna itself. The magnetic coupling is established by a planar transformer, the primary and secondary windings of which are implemented on flexible substrate and Si chip, respectively. As a result, the Si chip can be assembled on the antenna with a mere placing and gluing process. First, the idea has been validated by theory. Electromagnetic simulations of a square heterogeneous transformer (1.0-mm side) show a maximum available power gain (MAG) of -0.4 dB at 868 MHz. In addition, the heterogeneous transformer is also quite tolerant with respect to misalignment between primary and secondary. An offset error of 150 \mu\ m reduces the MAG to -0.5 dB. A sub-optimal matching strategy, exploiting a simple on-chip capacitor, is then developed for antennas with 50-\Omega input impedances. Finally, the idea has been experimentally validated exploiting printed circuit board (PCB) prototypes. A PCB transformer (1.5-mm side) and a transformer rectifier (two-diode Dickson multiplier) have been fabricated and tested. Measurements indicates a MAG of -0.3 dB at 868 MHz for the transformer and the capability of the developed rectifier to supply a 220-\k\Omega load at 1.5 V with a -2-dBm input power. [ABSTRACT FROM AUTHOR]

Keywords: antennas; bandwidth allocation; microwave propagation EN antennas bandwidth allocation microwave propagation 415 418 4 06/01/23 20230501 NES 230501 INTRODUCTION A revolutionary enhancement of transmission data rates is required to meet the challenge of an exponential capacity increase for the sixth generation (6G) and beyond mobile communication and sensing systems in the era of 2030 and beyond. They can be clustered into three main categories, namely antennas at the THz band, antennas at the mmWave band, and propagation at mmWave and THz bands. SUMMARY All of the papers selected for this Special Issue provide the first-hand information and the state of the art of advanced antenna technologies and propagation modelling at mmWave, sub-mmWave, and THz bands. [Extracted from the article]

This paper presents experimental verification results for a finite‐sized array of a simple non‐reciprocal metasurface elements. The metasurface elements consists of ferrite loaded metal patches. Experimental results demonstrate nonreciprocity, achieving isolation exceeding 20 dB at 6.4 GHz in a 2×2 array. Additionally, these findings are compared with simulation results for a 4×4 array to validate its practicality in a finite array setting. [ABSTRACT FROM AUTHOR]

The integration of antennas into disposable paper drones using inkjet printing technology is presented. These drones or unmanned aerial vehicles (UAVs) are developed using origami folding structures. Two vertical monopole antennas based on the same design concept are proposed and their performance assessed for two different conditions. The conditions relate to the placement of the other electronic components and circuits on the origami drones as reported in the literature. The first is when the electromechanical components and corresponding metallic layers are located in the wings. In this case, the effect of the possible location of the antenna as well as the deformation of the wings on S11 is discussed. The second is a more general case scenario which includes when the components and motors are placed at the tail and lower part of the body of the drone. The antenna elements are directly printed onto a photo paper substrate using silver nanoparticle conductive ink. Subsequently, the substrate is folded to create a paper drone. Low-cost desktop inkjet printing equipment is used to deposit the metallic tracks of the antenna. The designs target the current frequency bands employed in the control and wireless communication of commercial drones (2.4 GHz and 5 GHz bands). The purpose of this work is to investigate potential antenna scenarios for disposable drones which may one day be fully fabricated using inkjet printing technology. All antenna designs and studies have been simulated using CST Microwave Studio and compared well with experimental results. [ABSTRACT FROM AUTHOR]

In this paper, we study the diversity-multiplexing-gain tradeoff (DMT) of wireless relay networks under the half-duplex constraint. It is often unclear what penalty if any, is imposed by the half-duplex constraint on the DMT of such networks. We study two classes of networks; the first class, called KPP(I) networks, is the class of networks with the relays organized in K parallel paths between the source and the destination. While we assume that there is no direct source-destination path, the K relaying paths can interfere with each other. The second class, termed as layered networks, is comprised of relays organized in layers, where links exist only between adjacent layers. [ABSTRACT FROM PUBLISHER]

Additive manufacturing has emerged as a transformative methodology in numerous engineering domains, with the fabrication of antennas and electromagnetic devices being a promising application area. This study presents a comprehensive review of the application of these technologies for manufacturing electromagnetic devices, offering a categorized analysis based on different types of additive manufacturing techniques. Each category is examined, and its characteristics are briefly described, highlighting not only the most innovative and significant devices fabricated using specific technologies, but also identifying their limitations and strengths. Through a dual analysis, this paper provides a deep understanding of the potential of and challenges associated with using different additive manufacturing technologies in the design and crafting of electromagnetic components. Moreover, this review offers recommendations for future studies, suggesting how the unique features of this new manufacturing paradigm could be further leveraged for breakthroughs in the electromagnetic field. [ABSTRACT FROM AUTHOR]

This paper studies the effectiveness of relaying for interference mitigation in an interference-limited communication scenario. We are motivated by the observation that in a cellular network, a relay node placed at the cell edge observes a combination of intended signal and inter-cell interference that is correlated with the received signal at a nearby destination, so a relaying link can effectively allow the antennas at the relay and at the destination to be pooled together for both signal enhancement and interference mitigation. We model this scenario by a multiple-input multiple-output (MIMO) Gaussian relay channel with a digital relay-to-destination link of finite capacity, and with correlated noise across the relay and destination antennas. Assuming a compress-and-forward strategy with Gaussian input distribution and quantization noise, we propose a coordinate ascent algorithm for obtaining a stationary point of the non-convex joint optimization of the transmit and quantization covariance matrices. For fixed input distribution, the globally optimum quantization noise covariance matrix can be found in closed-form using a transformation for the relay’s observation that simultaneously diagonalizes two conditional covariance matrices by congruence. For fixed quantization, the globally optimum transmit covariance matrix can be found via convex optimization. This paper further shows that such an optimized achievable rate is within a constant additive gap of the MIMO relay channel capacity. The optimal structure of the quantization noise covariance enables a characterization of the slope of the achievable rate as a function of the relaying link capacity. Moreover, this paper shows that the improvement in spatial degrees of freedom by MIMO relaying in the presence of noise correlation is related to the aforementioned slope via a connection to the deterministic relay channel. [ABSTRACT FROM AUTHOR]

Respiratory problems are common amongst older people. The rapid increase in the ageing population has led to a need for developing technologies that can monitor such conditions unobtrusively. This paper presents a novel study that investigates Wi-Fi and ultra-wideband (UWB) antenna sensors to simultaneously monitor two different breathing parameters: respiratory rate, and exhaled breath. Experiments were carried out with two subjects undergoing three breathing cases in breaths per minute (BPM): (1) slow breathing (12 BPM), (2) moderate breathing (20 BPM), and (3) fast breathing (28 BPM). Respiratory rates were captured by Wi-Fi sensors, and the data were processed to extract the respiration rates and compared with a metronome that controlled the subjects' breathing. On the other hand, exhaled breath data were captured by a UWB antenna using a vector network analyser (VNA). Corresponding reflection coefficient data (S11) were obtained from the subjects at the time of exhalation and compared with S11 in free space. The exhaled breath data from the UWB antenna were compared with relative humidity, which was measured with a digital psychrometer during the breathing exercises to determine whether a correlation existed between the exhaled breath's water vapour content and recorded S11 data. Finally, captured respiratory rate and exhaled breath data from the antenna sensors were compared to determine whether a correlation existed between the two parameters. The results showed that the antenna sensors were capable of capturing both parameters simultaneously. However, it was found that the two parameters were uncorrelated and independent of one another. [ABSTRACT FROM AUTHOR]

Ever‐increasing bandwidth requirements from various industries drive the need for the ever‐increasing bandwidth of antennas used for testing. Broadband Double‐Ridged Guide Horn (DRGH) antennas are used extensively in antenna measurement and ElectroMagnetic Compatibility/Interference (EMC/I) testing. The current state‐of‐the‐art broadband DRGH antennas reported in the literature for use in measurement applications cover bandwidth ratios as large as 36:1 (0.5–18 GHz). This paper presents the design and realisation of a DRGH antenna with a 100:1 bandwidth ratio (0.5–50 GHz). To achieve such a wide bandwidth, the ridge gap, width and feed were optimised, and a novel coaxial‐to‐ridge waveguide launcher section based on a typical Vivaldi antenna was developed. Backward radiation was reduced using an absorber‐filled cavity. A prototype DRGH antenna was manufactured using additive manufacturing, also referred to as 3D printing. Simulated and measured results obtained in an anechoic chamber are presented. [ABSTRACT FROM AUTHOR]

In this paper, a quad-mode endfire planar phased antenna array with wide scan angle and 1.2 mm clearance is proposed for 5G mobile terminals. The proposed antenna can obtain over 8 GHz of impedance bandwidth. In this paper, it is suggested to efficiently combine a multimode array element with different radiation patterns for each mode into a phased antenna array. In the array, similar and wide embedded radiation patterns are obtained for the all four modes. Furthermore, a coaxial to differential stripline transition is designed in this paper. The differential feeding structure is very compact and utilizes only MMPX connector and vias. The total scan pattern and coverage efficiency of the measured and simulated phased array antenna are calculated in the range from 25 to 33 GHz, and good agreement between measured and simulated results is observed. The mean coverage efficiency along the frequency range is very similar, but minor difference in variance of coverage efficiency is observed in the measurements. The coverage efficiency of around 50% for the threshold gain of 5 dBi is achieved in the chosen frequency range. [ABSTRACT FROM AUTHOR]

In this paper, the B-scan technique is applied to a reverberation chamber (RC) for the first time to characterize the time-domain behavior of the chamber. Based on B-scan measurement results, three things are studied in this paper. 1) The statistical behavior of the fields in the time domain is investigated, and it is found that the received power of the impulse response follows chi-square distribution with one degree of freedom. 2) The stirrer efficiency is quantified based on the equivalent total scattering cross section (TSCS) of stirrers, and this definition is not sensitive to the antenna position and load in the RC. It is shown that the stirrer efficiency defined in this paper provides, for the first time, a quantitative way to evaluate the stirrer design and the chamber performance. 3) A time-gating technique is proposed which provides an alternative method to eliminate the early time response and obtain the chamber transfer function of the RC accurately. This could be potentially used to increase the stirrer efficiency without changing the stirrers physically. It is demonstrated that the B-scan technique is a very useful approach for the study and evaluation of an RC. [ABSTRACT FROM PUBLISHER]

The growing interest in unmanned aerial vehicles (UAVs) from both the scientific and industrial sectors has attracted a wave of new researchers and substantial investments in this expansive field. However, due to the wide range of topics and subdomains within UAV research, newcomers may find themselves overwhelmed by the numerous options available. It is therefore crucial for those involved in UAV research to recognize its interdisciplinary nature and its connections with other disciplines. This paper presents a comprehensive overview of the UAV field, highlighting recent trends and advancements. Drawing on recent literature reviews and surveys, the review begins by classifying UAVs based on their flight characteristics. It then provides an overview of current research trends in UAVs, utilizing data from the Scopus database to quantify the number of scientific documents associated with each research direction and their interconnections. This paper also explores potential areas for further development in UAVs, including communication, artificial intelligence, remote sensing, miniaturization, swarming and cooperative control, and transformability. Additionally, it discusses the development of aircraft control, commonly used control techniques, and appropriate control algorithms in UAV research. Furthermore, this paper addresses the general hardware and software architecture of UAVs, their applications, and the key issues associated with them. It also provides an overview of current open source software and hardware projects in the UAV field. By presenting a comprehensive view of the UAV field, this paper aims to enhance our understanding of this rapidly evolving and highly interdisciplinary area of research. [ABSTRACT FROM AUTHOR]

In this paper, an antenna gain measurement method for millimeter-wave antennas in an on-wafer probe station environment is studied. The one-antenna gain measurement has been known since the 1940s. However, the authors believe that this extension of their previous work is the first time when the method is systematically studied in the on-wafer probe station environment. The main difference between the original one-antenna gain measurement and our method is that in the probe station environment, the space is limited and, therefore, the reflecting plate dimensions are limited. We have studied the effect of the reflector size limitation through computations using physical optics and through measurements with a standard gain horn (SGH) and with a printed microstrip patch antenna. The necessary size of the reflecting plate naturally depends on the beamwidth of the antenna under test and on the distance. Time gating has been applied in the retrieving calculation to filter out multiple reflections. According to this paper, the one-antenna gain measurement in the $W$ -band results in the correct antenna gain with very high accuracy for the highly directional SGH. For the patch antenna, the gain measured in the on-wafer probe station environment agrees well with the simulated one. [ABSTRACT FROM AUTHOR]

This paper compares three modern and two classical multiobjective optimizers (MOOs) as applied to real-world problems in electromagnetics. The behavior of sophisticated optimizers on simple test functions has been studied exhaustively. In contrast, the algorithms here are tested on practical applications, where the function evaluations are computationally expensive, making the convergence rate a crucial factor. The examples considered include the optimization of a narrowband slot antenna, a mushroom-type electromagnetic bandgap structure, and an ultrawideband Vivaldi antenna. Another popular topic in the literature is in comparing classical MOOs on electromagnetics problems. The modern optimizers chosen in this paper are state of the art and each has a distinct design philosophy. This paper introduces two unique MOOs to the electromagnetics community: BORG, an auto-adaptive genetic algorithm and the Multi-Objective Covariance Matrix Adaptation Evolutionary Strategy (MO-CMA-ES), an extension of the popular single-objective CMA-ES. These algorithms are compared to the Multi-objective Evolutionary Algorithm based on Decomposition (MOEA/D), a Chebysheff scalarization algorithm, and two classical MOOs. This paper will study the behavior of these algorithms on problems in electromagnetics with a limited number of function evaluations using five distinct metrics and will provide useful guidelines and recommended optimizer settings. [ABSTRACT FROM AUTHOR]

This paper considers the uplink performance of a multi-user massive multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system with mobile users. Mobility brings two major problems to a MIMO-OFDM system: inter carrier interference (ICI) and channel aging. In practice, it is common to allot multiple contiguous subcarriers to a user as well as schedule multiple users on each subcarrier. Motivated by this, we consider a general subcarrier allocation scheme and derive expressions for the ICI power, uplink signal to interference plus noise ratio and the achievable uplink sum-rate, taking into account the ICI and the multi-user interference due to channel aging. We show that the system incurs a near-constant ICI power that depends linearly on the ratio of the number of users per subcarrier to the number of subcarriers per user, nearly independently of how the UEs distribute their power across the subcarriers. Further, we exploit the coherence bandwidth of the channel to reduce the length of the pilot sequences required for uplink channel estimation. We consider both zero-forcing and maximal-ratio combining at the receiver and compare the respective sum-rate performances. In either case, the subcarrier allocation scheme considered in this paper leads to significantly higher sum-rates compared to previous work, owing to the near-constant ICI property as well as the reduced pilot overhead. [ABSTRACT FROM AUTHOR]

This two-part paper aims to quantify the cost of device activity detection in an uplink massive connectivity scenario with a large number of devices but device activities are sporadic. Part I of this paper shows that in an asymptotic massive multiple-input multiple-output (MIMO) regime, device activity detection can always be made perfect. Part II of this paper subsequently shows that despite the perfect device activity detection, there is nevertheless significant cost due to device detection in terms of overall achievable rate, because of the fact that nonorthogonal pilot sequences have to be used in order to accommodate the large number of potential devices, resulting in significantly larger channel estimation error as compared to conventional massive MIMO systems with orthogonal pilots. Specifically, this paper characterizes each active user's achievable rate using random matrix theory under either maximal-ratio combining (MRC) or minimum mean-squared error (MMSE) receive beamforming at the base station (BS), assuming the statistics of their estimated channels as derived in Part I. The characterization of user rate also allows the optimization of pilot sequences length. Moreover, in contrast to the conventional massive MIMO system, the MMSE beamforming is shown to achieve much higher rate than the MRC beamforming for the massive connectivity scenario under consideration. Finally, this paper illustrates the necessity of user scheduling for rate maximization when the number of active users is larger than the number of antennas at the BS. [ABSTRACT FROM AUTHOR]

This paper presents the Greene second-order parabolic equation (PE) solution to model radio propagation over irregular terrain. This solution is implemented by finite-difference and shift-map technique. The second-order finite-difference approach performs well for slopes up to about 15°, and discontinuous slope changes up to about 30°, which is better than can be achieved using the split-step/Fourier approach. The results prove that the Greene PE solution has greater propagation angles than does the Claerbout PE solution. Thus, the Greene second-order solution can certainly give better results for large angle propagation over complicated terrain boundaries. Besides, we treat the important problem of accuracy of the different approximations of the PE-based propagation models, and derive the general PE solutions with respect to the terrain slope for the different approximations. It is useful to have collected in one paper, the most important PE approximations for radio propagation. [ABSTRACT FROM AUTHOR]

This paper is concerned with obtaining closed-form exact solution for the 2-D canonical problem of the reflected field from a moving planar discontinuity of a dielectric–magnetic medium that is excited by an impulsive line current. The spectral theory of transient (STT) that originally deals with nondispersive frequency-domain plane-wave spectra is used in this paper for addressing a time-variant scattering problem. The scattering from a moving object yields dispersive and anisotropic PW spectra. Nevertheless, we demonstrate that the STT is capable of dealing with these types of spectra and obtain the desired exact time-dependent solutions. The unique wave phenomena that are associated with the medium and scatterer velocity are explored. [ABSTRACT FROM PUBLISHER]

This paper proposes an all‐metal wideband circularly polarized (CP) single‐patch antenna based on TM11 mode. The conventional square patch is divided into four small square patch units by loading metal shorting walls under the two vertical centerlines. The shorting walls are windowed to facilitate coupling between the adjacent units. When the TM11 mode is excited, the coupling windows not only distribute energy but also provide the 90° phase difference required for CP radiation. An additional feeding network is not required, and its profile is less than 0.05λ0 (λ0 is the free space wavelength at the center frequency). Three minima in the axial ratio (AR) response are present. The results show that right‐hand circularly polarized (RHCP) radiation is achieved. The measured 3 dB AR bandwidth is 6.9%, ranging from 1.52 to 1.62 GHz, and the RHCP realized peak gain is 7.72 dBic. An all‐metal construction suitable for satellite communication systems is designed that has superior performance in harsh space environments. [ABSTRACT FROM AUTHOR]

This paper considers a massive random access problem in which a large number of sporadically active devices wish to communicate with a base station (BS) equipped with massive multiple-input multiple-output (MIMO) antennas. Each device is preassigned a unique signature sequence, and the BS identifies the active devices by detecting which sequences are transmitted. This device activity detection problem can be formulated as a maximum likelihood estimation (MLE) problem for which the sample covariance matrix of the received signal is a sufficient statistic. The goal of this paper is to characterize the feasible set of problem parameters under which this covariance based approach is able to successfully recover the device activities in the massive MIMO regime. Through an analysis of the asymptotic behaviors of MLE via its associated Fisher information matrix, this paper derives a necessary and sufficient condition on the Fisher information matrix to ensure a vanishing probability of detection error as the number of antennas goes to infinity, based on which a numerical phase transition analysis is obtained. This condition is also examined from a perspective of covariance matching, which relates the phase transition analysis to a recently derived scaling law. Further, we provide a characterization of the distribution of the estimation error in MLE, based on which the error probabilities in device activity detection can be accurately predicted. Finally, this paper studies a random access scheme with joint device activity and data detection and analyzes its performance in a similar way. [ABSTRACT FROM AUTHOR]

The capability of controlling and modifying wireless propagation channels is one of the prerogatives of beyond-5G systems. In this paper, we propose the use of a controllable local propagation environment surrounding the terminals, and analyze its positive effect on the multiplexing capability of massive MIMO systems. In particular, we focus on using a few switched passive elements surrounding each terminal. In this way, the modification of the propagation environment is not realized by means of a single structure, as in reconfigurable intelligent surfaces (RIS), but is achieved by the cooperative work of all the terminals. By employing numerical simulations, we show that the proposed system outperforms its non-reconfigurable counterpart in terms of the number of contemporary connected users. Moreover, the optimized system enables a substantial increase in the minimum received power by the terminals, thus guaranteeing superior channel fairness. [ABSTRACT FROM AUTHOR]

In this paper, we study the average throughput performance of energy beamforming in a multi-antenna wireless-powered communication network (WPCN). The considered network consists of one hybrid access point (AP) with multiple antennas and a single-antenna user. The user has no constant power supply and, thus, needs to harvest energy from the signals broadcast by the AP in the downlink (DL) before sending its data back to the AP with the harvested energy in the uplink (UL). We derive closed-form expressions of the average throughput and their asymptotic expressions at a high SNR for both delay-limited and delay-tolerant transmission modes. The optimal DL energy harvesting time, which maximizes the system throughput, is then obtained for high SNR. All analytical expressions are validated by numerical simulations. The impact of various parameters, such as the AP transmit power, the energy harvesting time, and the number of antennas, on the system throughput is also investigated. [ABSTRACT FROM AUTHOR]

This paper discusses a method to regularize linear problems in presence of incomplete and noisy data generated by partially or totally unknown sources. The idea is to identify the “simplest” solution, looking for the system having the minimum number of degrees of freedom (NDF) compatible with the available data. It is shown that a normalized version of the trace norm (known as 1-Schatten norm in functional analysis) is a good convex approximation of the NDF of the field. This allows to use the trace norm as a convex surrogate of the NDF in the minimization process, taking advantage of the recent literature on rank minimization. Examples regarding MIMO beamforming from incomplete channel matrix, field interpolation with no a priori information on the sources, and land-mine identification using the total field are discussed. [ABSTRACT FROM PUBLISHER]

This paper deals with the efficient computation of scattering problems by fast oscillating periodic surfaces using two-scale expansion homogenization techniques. The proposed method splits the field between an effective field and a boundary layer corrector and applies an asymptotic expansion. Then, the evaluation of these boundary layers leads to the extraction of effective parameters, modeling the effects of the highly oscillating surface on the scattered field. A previous paper has already presented such a technique to deal with TM polarization. First, this paper extends the approach to TE polarization and completes it by pointing out all the key points. Especially it shows the map of the split fields underlining the physical contribution of each term. Second, this paper exposes and compares two different uses of these computed effective parameters. Numerical examples show the validity of the method, especially by justifying the asymptotic expansion ansatz. Computational efficiency is discussed. [ABSTRACT FROM AUTHOR]

This paper discusses the design and implementation of a biomimetic, flexible antenna system consisting of flexible dipoles on Pyralux AP. They are implemented into a novel, airborne atmospheric sensor system. The antennas and substrate serve a secondary function as a rotor system, forcing the sensor nodes to autorotate when falling to maximize drag and decrease their fall speed. The designed antenna system works both in the industrial, scientific, and medical band and the GPS L1 band with the designed antennas having bandwidths of 100 and 130 MHz, respectively. This paper also presents a test procedure to characterize the antenna performance at different bend angles. [ABSTRACT FROM AUTHOR]

Singular divergence-conforming bases have been proposed for the solution of integral equations although they have seen only occasional use in practical applications. The existing singular bases are not hierarchical, which prevents their use in adaptive $ {p}$ -refinement applications. In this paper, a new family of singular hierarchical basis functions is proposed for quadrilateral cells. These functions model the singularities associated with current and charge density at edges and are more convenient for modeling such singularities than triangular bases of the same kind. The basis functions are of the additive kind and combine a hierarchical polynomial representation on quadrilaterals with linearly independent singular terms that incorporate general exponents that may be adjusted for the specific wedge angle of interest. Moreover, the added singular basis functions are computed on the fly. On the basis of various reported numerical results, this paper also illustrates the difficulties, the advantages, the accuracy, and the cost of using such bases in the method of moment solutions of integral equations. [ABSTRACT FROM AUTHOR]

This paper presents a novel surface-wave (SW)-based high-impedance surface (HIS) multibeam antenna with 360° scanning capability in azimuth. The proposed antenna consists of four rotationally symmetric beamforming networks (BFNs) and a microstrip patch array-based HIS. Regarding to the BFN, it is formed by a planar offset parabolic reflector fed by multiple substrate integrated waveguides. Through proper design, the proposed BFN can efficiently launch guided SWs with TM0 mode. With the perturbation of the HIS structure, the bounded SWs can be transformed to $m=-1$ space harmonic mode leaky-wave radiation. Combining the feature of the leaky-wave radiation in the elevation plane and the manipulation of the propagation direction of the SWs by switching the feeding ports, beam scanning in the azimuth direction with a tilted elevation angle can be realized. As the HIS is shared by the four BFNs, the size of the antenna can be reduced and a broadened antenna scanning range is achieved. In this paper, a prototype of the proposed antenna with 28 feeding ports, 7 in each BFN, is numerically analyzed and experimentally demonstrated. The proposed antenna features low-cost, low-profile, and single layer configuration. [ABSTRACT FROM PUBLISHER]

The use of unmanned aircraft systems (UAS) is expanding rapidly. For safe and reliable integration of UAS into the National Airspace System (NAS), control and nonpayload communication (CNPC) system requirements are being developed. The air-to-ground (AG) channel characteristics essentially determine CNPC link performance. The National Aeronautics and Space Administration (NASA) Glenn Research Center has sponsored a comprehensive AG channel measurement campaign in 2013 in both the L- and C-bands recently allocated for UAS. These measurements covered nearly all typical ground site (GS) local environments, including over water, hilly, mountainous, suburb, and near urban. As a continuation of results reported for the over-water scenarios, a description of the measurement campaign, measured results, and complete AG channel models for hilly and mountainous terrains are provided in this paper. The path loss is modeled by a modified log-distance path loss model with a correction for flight direction; path loss results are close to those of free space. A strong ground reflection was observed only for some small portions of some of the flight paths. The small-scale fading is well modeled by the Ricean distribution with a $K$-factor of 29.4 dB in the C-band and 12.8 dB in the L-band. The interband signals are uncorrelated. The spatial correlation for the two intraband channels with an aircraft antenna separation of 1.8 m is greater than 0.85. The C-band root-mean-square delay spread (RMS-DS) is 10 ns most of the time, with a maximum of 1 \mu\text{s} in hilly terrain and 180 ns in mountainous terrain. Tapped delay line (TDL) models accounting for the line of sight (LOS) and up to seven intermittent multipath components (MPCs) were developed, including the MPCs' probability of occurrence, relative power, phase, duration, and excess delay. [ABSTRACT FROM PUBLISHER]

This paper analyzes the performance of the recently proposed quadrature spatial modulation (QSM) multiple-input–multiple-output (MIMO) system over Nakagami- $m$ fading channel. In the analysis, the general distribution of the Nakagami- m$ channel phase is considered. In the literature, performance analysis of spatial modulation (SM) over Nakagami- m$ channel with uniform phase is conducted. However, apart from the very special case of , where Nakagami- $m$ fading corresponds to Rayleigh fading, the phase of the Nakagami- $m$ distribution is not uniformly distributed. It is shown in this paper that the phase of the channel has major impact on the performance of spatial multiplexing MIMO systems such as SM and QSM systems. A general upper bound expression for the average bit error ratio (ABER) performance of QSM is derived, and the impact of different channel parameters is studied. Monte Carlo simulation results are provided to corroborate the exactness of the derived analysis. [ABSTRACT FROM PUBLISHER]

This paper presents a new theory for analyzing the leaky-wave (LW) mechanism supported by planar metasurfaces (MTSs) described by continuous, anisotropic, nonuniform, locally periodic boundary conditions (BCs), and excited by a vertical dipole at the interface. These BCs well represent a dense distribution of subwavelength metal patches of infinitesimal thickness, printed on a grounded slab. We denote succinctly this theoretical formulation as flat optics for LWs. This formulation is based on an adiabatic, asymptotic form of the Floquet theorem, introduced here for the first time. The adiabatic Floquet-wave analysis allows for: 1) describing the mechanism of global interaction between the cylindrical surface wave (SW) launched by the dipole and the modulated MTS; 2) introducing a generalized curvilinear-wavefront LW field that can be used for controlling the radiation-pattern shaping; 3) describing the local and global transfer of energy from SW to LW; 4) establishing an analytical relationship between the aperture field polarization and the anisotropic parameters of the MTS and 5) between the leakage parameter $\alpha $ and the MTS modulation index. Concerning the latter point, a closed-form formula for $\alpha $ is introduced, which allows for unprecedented control of the aperture field amplitude. The theoretical results are successfully validated by comparison with a full-wave analysis, showing impressive accuracy. In a companion paper published in this Journal issue, the present theory is used for the synthesis of a large class of planar aperture antennas. [ABSTRACT FROM AUTHOR]

Since the end of the 19th century, radioelectronic devices (REDs) have actively penetrated into all modern community spheres. Achievements in the fields of radio engineering and electronics, as well as computing, information, telecommunications, and other technologies, have greatly contributed to this. The main elements of REDs are antennas and microwave devices. For example, linear (wire) antennas are the basis of long-distance communication agency networks of various law enforcement agencies and departments. The manufacturing of REDs requires the regular and rapid appearance of more and more advanced types with minimal costs. At the same time, the design complexity of REDs and the tightening of EMC requirements caused by the growth of upper frequencies of useful and interfering signals, the mounting density, as well as the capabilities of generators of intentional electromagnetic impacts, together with the need to take into account inter-element, inter-unit, and inter-system interference, require more and more accurate designs of REDs. However, this becomes impossible without computer modeling, which saves the time and financial resources required for their development, as well as to evaluate the correctness of the proposed technical solutions. During the design process, as a rule, a multivariate analysis or optimization of the product is performed. In this case, methods of computational electrodynamics (one of which is the method of moments) are used. They are based on the replacement of continuous functions with their discrete analogues (construction of a grid), which reduces the problem to the solution of a system of linear algebraic equations (SLAE). The problem's complexity depends on the complexity of the SLAE solution, which is determined by its order (which in turn is determined by the complexity of the simulated object and its surrounding area) and by the number of the required SLAE solutions for each problem (determined by the upper frequency of the signal, the number, and range of the optimized parameters). This dramatically increases the computational cost, which becomes the main constraint for the optimal design. Therefore, reducing the computational cost for the analysis and optimization of RED elements (in particular, linear antennas) is an important scientific problem. Meanwhile, finding new antenna structures that meet all the desired features (low price, required characteristics, manufacturable design with small dimensions and windage, etc.) is no less important today. One of the promise solutions for these problems is using a wire grid and sparse antennas for modeling and constructing antennas. Since the last century, a lot of research has been performed on them. The aim of this paper is to review their history and the main related aspects such as computational, acceleration, and optimization used methods, the fields of their application, and their evolution to this moment. In addition, this paper provides a possible future implementation of wire-grid and sparse antennas from the authors' point of view by presenting a new method that is under research to obtain effective wire sparse antennas. [ABSTRACT FROM AUTHOR]

There is an on-going need for faster, more accurate, and easier to implement threat identification systems for concealed electronics, to thwart terrorism and espionage attempts. Common electronics are used in the design of improvised explosive devices (IEDs), targeting military, and civilian populations, while concealed recording devices steal proprietary/confidential data, compromising both government and industrial resources. This paper discusses a novel, nonintrusive, repeatable, reliable, expandable, and simple-to-implement detection and identification (D&I) system for identifying threats by using unintended radiated emissions (URE). This paper differs from current URE proposals, by avoiding energy radiation. The proposed process also addresses big data problems involved in capturing and building databases of URE characteristics. Issue interpretation is utilized with URE data to distinguish between threat/nonthreat devices using multiple criteria decision analysis and other decision-making techniques to determine model and mode of hidden devices. System optimization, verified by testing, is used to improve the speed and accuracy of the identification algorithm. The system is developed with data from 130 devices and validated with 33 separate devices, which are representative of IED and espionage threats. Due to slow progress in the URE D&I field, the properties and potential of a more effective D&I system, compared to current methods, will be of interest to the explosive ordnance disposal, security services, electronic systems manufacturing, automated inventory, mobile application development communities, and potentially others as well. For a field that is not well documented, this paper provides a clear, concise, and detailed model for future research and applications of URE D&I. [ABSTRACT FROM AUTHOR]

In this paper, we focus on the downlink ergodic sum rate of a single-cell large-scale multiuser MIMO system in which the base station employs $N$ antennas to communicate with $K$ single-antenna user equipments (UEs). A regularized zero-forcing (RZF) scheme is used for precoding under the assumption that each UE uses a specific power and each link forms a spatially correlated MIMO Rician fading channel. The analysis is conducted assuming that $N$ and $K$ grow large with a given ratio and perfect channel state information is available at the base station. New results from random matrix theory and large system analysis are used to compute an asymptotic expression of the signal-to-interference-plus-noise ratio as a function of system parameters, spatial correlation matrix, and Rician factor. Numerical results are used to validate the accuracy of asymptotic approximations in the finite system regime and to evaluate the performance under different operating conditions. It turns out that the asymptotic expressions provide accurate approximations even for relatively small values of $N$ and $K$. [ABSTRACT FROM AUTHOR]

This paper investigates the achievable performance of cell-free massive multiple-input multiple-output (MIMO) systems with low resolution analog-to-digital converters (ADCs) at both the access points (APs) and users. A closed-form expression for the achievable rate is derived, which enables the study of the effects of AP number, antenna number per AP, user number, and ADC resolution on the achievable rate. In addition, a simple asymptotic approximation for the individual user rate is presented, which shows that the user rate is mainly constrained by the ADC resolution at the user. Moreover, we propose an ADC resolution bits allocation scheme aiming at maximizing the sum rate subject to the total ADC resolution bits constraint, which substantially outperforms the equal ADC resolution bits allocation scheme. Furthermore, a max–min power control scheme is proposed, which not only ensures user fairness, but also improves the achievable rate. Finally, simulation results are provided to corroborate the analytical results. [ABSTRACT FROM AUTHOR]

The problem of multiple-input multiple-output (MIMO) channel estimation at millimeter-wave frequencies, both in single-user setting and in multi-user setting, is tackled in this paper. Using a subspace approach, we develop a protocol enabling the estimation of the right (respectively, left) singular vectors at the transmitter (respectively, receiver) side; then, we adapt the projection approximation subspace tracking with deflation and the orthogonal Oja algorithms to our framework and obtain two-channel estimation algorithms. We also present an alternative algorithm based on the least squares approach. The hybrid analog/digital nature of the beamformer is also explicitly taken into account at the algorithm design stage. In order to limit the system complexity, a fixed analog beamformer is used at both sides of the communication links. The obtained numerical results, showing the accuracy in the estimation of the channel matrix dominant singular vectors, the system achievable spectral efficiency, and the system bit error rate, prove that the proposed algorithms are effective and that they compare favorably, in terms of the performance-complexity tradeoff, with respect to several competing alternatives. [ABSTRACT FROM AUTHOR]

In this paper, a single‐layer substrate‐integrated waveguide (SIW) filtering antenna with three independently controllable radiation nulls is presented. The antenna consists of a single‐layer SIW loaded with two radiation gaps, four metallization columns, and folded‐type slots etched on the chip. The back‐cavity double slots are responsible for extending the bandwidth and realizing the radiation function. Three radiation nulls are generated by analyzing the current distribution of the radiation chip, radiation gap, and folded slots. By adjusting the radiation gap distance, the length of the radiation gap, and the folded slot, three broadside radiation nulls are independently controlled without influence on each other. Therefore, flexible out‐of‐band suppression characteristic is obtained. For demonstration, a prototype is fabricated and tested. The measurements match the simulation results better. The filtering antenna operates at 3.70 GHz with a bandwidth of 5.68% (3.59–3.80 GHz), achieving an average realized gain of 5.10 dBi in a flat passband. The out‐of‐band rejection level exceeds 20 dB. [ABSTRACT FROM AUTHOR]

Multiple signal classification (MUSIC) has been widely applied in multiple-input multiple-output (MIMO) receivers for direction-of-arrival (DOA) estimation. To reduce the cost of radio frequency (RF) chains at millimeter-wave bands, hybrid analog-digital structure has been adopted in massive MIMO transceivers. In this situation, received signals at the antennas are unavailable to the digital receiver, and as a consequence, the spatial covariance matrix (SCM), which is essential in MUSIC algorithm, cannot be obtained using traditional sample average approach. Based on our previous work, we propose a novel algorithm for SCM reconstruction in hybrid massive MIMO systems with multiple RF chains in this paper. By switching the analog beamformers to a group of predetermined DOAs, SCM can be reconstructed through the solutions of a set of linear equations. Furthermore, a low-complexity algorithm, as well as a careful selection of the predetermined DOAs, will be also presented in this paper. Simulation results show that the proposed algorithms can reconstruct the SCM accurately so that MUSIC algorithm can be well used in hybrid massive MIMO systems with multiple RF chains. [ABSTRACT FROM AUTHOR]

Long-Range Wide-Area Networks (LoRaWAN) allow the transmission of data via radio link from sensors, which are potentially isolated or difficult to access, to gateways and servers that are connected to cellular networks for data processing, exchange, or relay, with low transmission power. This concept employs Long-Range (LoRa) modulation and has led to the emergence of many applications for the monitoring and tracking of objects. However, due to its characteristic of a low data rate for low-power communication, the transmission of information with LoRa technology is not suitable for the fast real-time monitoring of data. Additionally, due to its narrow bandwidth, an attempt to perform localization through the LoRa modulation technique will result in very limited accuracy because of its inability to resolve multipath problems. Thus, in this paper, we propose a multi-standard Ultra-Wide Bandwidth (UWB) and LoRa end-device that is capable of measuring location with high accuracy using UWB technology and then transmitting the location information through LoRa method to gateways and the Internet of Things Network. The results of measurements in indoor and outdoor scenarios show a UWB localization accuracy that is of sub-meter level, being between 10 and 33 cm, and a UWB range of 124 m in Line-of-Sight (LOS) and 55 m in Non-Line-of-Sight (NLOS) applications, respectively. [ABSTRACT FROM AUTHOR]

In this paper we present the results of a study of electronically and mechanically generated transverse magnetic (TM) and transverse electric (TE) dipoles in a lossy environment, so that antenna design guidelines may be established at the system level. At far-zone, the ratio | E H | : = η 0 is the intrinsic impedance, and they are identical for the TM and its dual TE dipoles. Nonetheless, the ratio in near-zone behaves drastically different between the TM and dual TE. We derived closed form expressions of the antenna Ohmic loss in a spherical lossy shell (SLS) for the first time, yielding precise radiation efficiency η r and accurate computations. For electrically small dipole of normalized half dipole-length | k a | ≪ 1 , analytic results show that η r is proportional to | k a | 3 for TM dipole, and |ka| for TE dipole, respectively. Consequently, efficiency η r of TE can be better than TM in two to three orders of magnitude for under seawater communication. The time-domain energy flow velocity (EFV) patterns show that the TE dipoles are always radiation-dominating, in either lossless or lossy medium. Numerical results reveal that mechanically spinning dipole is smaller in size and weight but it requires more operation power, compared to its electromagnetic counter-partners. Finally, design, tuning and impedance matching of low-profile TE dipole antenna are outlined. [ABSTRACT FROM AUTHOR]