Search

The rapid discrimination of bacteria is currently an emerging trend in the fields of food safety, medical detection, and environmental observation. Traditional methods often require lengthy culturing processes, specialized analytical equipment, and bacterial recognition receptors. In response to this need, we have developed a paper-based fluorescence sensor array platform for identifying different bacteria. The sensor array is based on three unique carbon quantum dots (CQDs) as sensing units, each modified with a different antibiotic (polymyxin B, ampicillin, and gentamicin). These antibiotic-modified CQDs can aggregate on the bacterial surface, triggering aggregation-induced fluorescence quenching. The sensor array exhibits varying fluorescent responses to different bacterial species. To achieve low-cost and portable detection, CQDs were formulated into fluorescent ink and used with an inkjet printer to manufacture paper-based sensor arrays. A smartphone was used to collect the responses generated by the bacteria and platform. Diverse machine learning algorithms were utilized to discriminate bacterial types. Our findings showcase the platform's remarkable capability to differentiate among five bacterial strains, within a detection range spanning from 1.0 × 10 3  CFU/mL to 1.0 × 10 7  CFU/mL. Its practicality is further validated through the accurate identification of blind bacterial samples. With its cost-effectiveness, ease of fabrication, and high degree of integration, this platform holds significant promise for on-site detection of diverse bacteria., (© 2024. The Author(s).)

Three specific catalysts, namely ZIF-67 (zeolitic imidazolate framework-67), Co@NCF (Co@Nitrogen-Doped Carbon Framework), and 3D NCF (Three-Dimensional Nitrogen-Doped Carbon Framework), were prepared and studied for pulp and paper mill effluent degradation using heterogeneous activation of peroxymonosulfate (PMS). Numerous characterizations, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and N 2 adsorption, were used to characterize the properties of three different catalysts. 3D NCF is remarkably effective at heterogeneous activation of PMS to generate sulfate radicals to degrade pulp and paper mill effluent (PPME) compared to the other as-prepared catalysts. The catalytic activity reveals a sequence of 3D NCF > Co@NCF > ZIF-67.3D NCF could degrade organic pollutants in 30 min at an initial COD concentration of 1146 mg/L of PPME, 0.2 g/L catalysts, 2 g/L PMS, and 50 °C. Consequently, it was observed that the degradation of PPME using 3D NCF followed first-order kinetics, with an activation energy of 40.54 kJ mol -1 . Overall, 3D NCF/PMS system reveals promising performance for PPME removal., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Paper-based carbon working electrodes were modified with mercury or bismuth films for the determination of trace metals in aqueous solutions. Both modification procedures were optimized in terms of selectivity and sensitivity for the determination of different heavy metals, aiming their simultaneous determination. Cd (II), Pb (II) and In (III) could be quantified with both films. However, Cu (II) could not be determined with bismuth films. The modification with mercury films led to the most sensitive method, with linear ranges between 0.1 and 10 µg/mL and limits of detection of 0.4, 0.1, 0.04 and 0.2 µg/mL for Cd (II), Pb (II), In (III) and Cu (II), respectively. Nevertheless, the bismuth film was a more sustainable alternative to mercury. Tap-water samples were analyzed for the determination of metals by standard addition methodology with good accuracy, by using a low-cost and easily disposable paper-based electrochemical platform. This system demonstrated its usefulness for monitoring heavy metals in water., Competing Interests: The authors declare no conflict of interest.

In this study, the performance of a paper-based, screen-printed biofuel cell with mesoporous MgO-templated carbon (MgOC) electrodes was improved in two steps. First, a small amount of carboxymethyl cellulose (CMC) was added to the MgOC ink. Next, the cathode was modified with bilirubin prior to immobilizing the bilirubin oxidase (BOD). The CMC increased the accessibility of the mesopores of the MgOC, and subsequently, the performance of both the bioanode and biocathode. CMC also likely increased the stability of the electrodes. The pre-modification with bilirubin improved the orientation of the BOD, which facilitated direct electron transfer. With these two steps, an open circuit potential of 0.65 V, a maximal current density of 1.94 mA cm -2 , and a maximal power density of 465 μW cm -2 was achieved with lactate oxidase as bioanode enzyme and lactate as fuel. This is one of the highest reported performances for a biofuel cell., (© 2022. The Author(s).)

In recent years, stable and photoluminescence (PL) tunable fluorescent materials known as carbon dots (CDs) have seen rapid development. Here, a simple, low-cost, and environmentally friendly approach has been developed to synthesize the orange-red CDs (OR-CDs) with paper tissues as the precursor in the presence of ethanol and concentrated sulfuric acid. The average diameter of the OR-CDs was measured at around 1.25 nm. The as-prepared OR-CDs are composed of carbon cores with the graphite structure distributed in the middle and wrapped or entangled by polymers for the outside. Moreover, the PL characteristics of the OR-CDs under the dilute solution state and the concentrated solution state, respectively, were explored. The former with the blue light showed prominent excitation-dependent characteristics in the range from 365 to 420 nm; the latter rendered the excitation-independent property with distinguished orange-red fluorescence emission. With an increase in the concentration, the emission fluorescence intensities gradually increased under the excitation wavelength of 540 nm, which can be attributed to the aggregation-induced emission property of the OR-CDs. By virtue of their excellent PL properties and low toxicity, we believe that the OR-CDs have potential applications in various optoelectronic areas, especially in white LED fields.

We explored the use of filter paper soaked in whole blood for measuring carbon (C) and nitrogen (N) stable isotopes, often used in feeding ecology or diet studies, to better understand drivers of exposure to contaminants. Our results showed no statistically or biologically relevant differences in C and N stable isotope measures between our gold standard (whole blood with anticoagulant) and eluates from processed, blood-soaked filter paper. Our data supported the effectiveness of using filter paper for assessing C and N stable isotopes in blood to address feeding ecology and other uses. The ease of sampling and processing should allow blood-soaked filter paper to be used in sampling of live (e.g., captured, stranded) and lethally taken (e.g., hunter-killed) wild vertebrates.

As China's demand for paper products increases, China's paper industry faces enormous pressure to reduce greenhouse gas emissions. By using material flow analysis in combination with input-output analysis, this study measured the waste paper recovery rate in a more accurate method and analyzed the impact of waste paper recycling on the carbon emissions from China's paper industry. China's waste paper recovery rate estimated in this study was close to 70% in 2017, much higher than that of 48% obtained with the traditional method. The regression results displayed a negative relationship between waste paper recovery rate and CO 2 emissions per unit of paper consumption during 2000-2017 in China. The rolling regression results further indicated that the impact of waste paper recycling was becoming stronger on reducing CO 2 emissions per unit of paper consumption in China. Since an inverted "U" shape relationship exists between waste paper recovery rate and its reduction effect on carbon emissions from the paper industry, the regression results suggested that China's waste paper recovery rate has not reached the optimal level with regard to carbon emissions from China's paper industry. Thus, although China's waste paper recovery rate has reached a relatively high level, currently waste paper recycling is still an effective method to reduce carbon emissions from China's paper industry.

Non-wood paper production, such as bamboo paper, is an alternative to meet the massive demand for paper consumption in the recent era. Bamboo paper, made from Bambusa vulgaris fibers and manufactured with the addition of activated nano-carbon, shows an improvement in paper quality. However, there is a potential worry with the incorporation of activated carbon since it may hinder the degradation process of paper. Concerning the substance's life cycle, degradation assisted by the fungal decomposer of this new product is crucial. This study investigated the effects of the white-rot fungi, viz. Phlebiopsis sp and Pycnoporus sp., on the degradation of bamboo paper with- or without- activated nano-carbon (BPAC and BPNAC). In vitro experiments that combined two variables (Fungal agents and Paper types) were carried out for 12 weeks. The results revealed that Pycnoporus sp. was more effective in decomposing both BPAC and BPNAC rather than Phlebiopsis sp. After being degraded by Phlebiopsis sp. and Pycnoporus sp. for 12 weeks, the remaining mass of BPAC was 64.14% and 48.96%, respectively, while the BPNAC was 69.89% and 38.25%, respectively. The ability of these fungal agents on composite-paper degradation was compared to other similar studies. Further investigation and possible applications were discussed.

Pulp and paper industry produces massive amounts of sludge from wastewater treatment, which constitute an enormous environmental challenge. A possible management option is the conversion of sludge into carbon-based adsorbents to be applied in water remediation. For such utilization it is important to investigate if sludge is a consistent raw material originating reproducible final materials (either over time or from different manufacturing processes), which is the main goal of this work. For that purpose, different primary (PS) and biological sludge (BS) batches from two factories with different operation modes were sampled and subjected to pyrolysis (P materials) and to pyrolysis followed by acid washing (PW materials). All the materials were characterized by proximate analysis, total organic carbon (TOC) and inorganic carbon (IC), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and N 2 adsorption isotherms (specific surface area (S BET )and porosity determination). Sludge from the two factories proved to have distinct physicochemical properties, mainly in what concerns IC. After pyrolysis, the washing step was essential to reduce IC and to considerably increase S BET , yet with high impact in the final production yield. Among the materials here produced, PW materials from PS were those having the highest S BET values (387-488 m 2  g -1 ). Overall, it was found that precursors from different factories might originate final materials with distinct characteristics, being essential to take into account this source of variability when considering paper mill sludge as a raw material. Nevertheless, for PS, low variability was found between batches, which points out to the reliability of such residues to be used as precursors of carbon adsorbents., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Glutathione is an important antioxidant found in body fluids and tissues, which inhibit damage to essential cellular constituents caused by reactive oxygen species. The analysis of glutathione levels in biological systems is important in early clinical diagnosis. A novel, cost-effective synthetic strategy has been developed for the fluorescent probe ethylenediamine passivated carbon dots. Tissue paper was chosen as the carbon source for this "green one pot" synthesis. Glutathione could induce quenching of the fluorescence intensity of ethylenediamine passivated carbon dots through surface interactions, resulting from their aggregation. Based on this, a novel fluorescence sensor was fabricated for the determination of Glutathione in body fluids. A linear calibration graph was obtained in the range of 6.0 × 10 -7 to 5.0 × 10 -8 M with a detection limit of 1.74 × 10 -9 M. The developed sensor was successfully used for the determination of glutathione in artificial saliva samples.

This article describes a method for the modification of paper with single-wall carbon nanohorns (SWCNHs) to form stable suprastructures. The SWCNHs form stable dahlia-like aggregates in solution that are then self-assembled into superior structures if the solvent is evaporated. Dipping paper sections into a dispersion of SWCNHs leads to the formation of a thin film that can be used for microextraction purposes. The coated paper can be easily handled with a simple pipette tip, paving the way for disposable extraction units. As a proof of concept, the extraction of antidepressants from urine and their determination by direct infusion mass spectrometry is studied. Limits of detection (LODs) were 10 ng/L for desipramine, amitriptyline, and mianserin, while the precision, expressed as a relative standard deviation, was 7.2%, 7.3%, and 9.8%, respectively.

Paper-based devices have been very much in the foreground of analytical science recently. This work innovatively proposed a fluorescent paper-based sensor (FPS) constructed on a hybrid polydimethylsiloxane (PDMS)/paper platform where cellulose papers functionalized with carbon dots (CDs) as fluorophores by Schiff base chemistry were loaded on the grooves array of a designed PDMS plate. As a proof of concept, the performance of FPS was investigated with folic acid (FA) as the target analyte. Under optimal conditions, FPS enabled a rapid fluorescence quenching response to FA via inner filter effect in a wide range of 1-300 μmol L -1 with the limit of detection of 0.28 μmol L -1 . The feasibility of FPS was further verified by the detection of FA in orange juice and urine samples with satisfactory results. The covalent modification of CDs on paper endowed the FPS with good assay reproducibility and stability. Interestingly, FPS achieved a more sensitive assay of FA than the conventional strategy, by which the same CDs were directly used to detect FA in a solution-based system. The FPS illuminated a novel strategy for construction of reliable and sensitive assays based on paper-based devices. It is of paramount importance for its practical application in biosensing and clinical diagnosis. Graphical abstract.

In this work, we developed a cascade signal amplification strategy for detection of IgG antigen by combining the rolling circle amplification (RCA) technique with oligonucleotide functionalized carbon dots (CDs), based on a paper-based electrochemiluminescence (ECL) origami device (PECLOD) for the first time. In this PECLOD, three-dimensional (3D) macroporous Au-paper electrode was fabricated and employed as the working electrode for specific and efficient antibodies capture. The RCA product containing tandem-repeat sequences could serve as an excellent template for periodic assembly of CDs, which presented per protein recognition event to numerous CDs tags for ECL readout. Under the optimal conditions, the proposed strategy showed remarkable amplification efficiency, very little nonspecific adsorption with good stability, reproducibility, and accuracy. Using human IgG (H-IgG) as a model protein, the designed strategy was successfully demonstrated for the ultrasensitive detection of protein target. The results revealed that the strategy exhibited a dynamic response to H-IgG range from 1.0 fM to 25 pM with a limit of detection as low as 0.15 fM. Importantly, the methodology can be further extended to the detection of other proteins or biomarkers., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Herein, an environment friendly paper-based biobattery is demonstrated that yields a power of 12.5W/m 3 . Whatman filter papers were used not only as support for electrode fabrication but also as separator of the biobattery. To provide electrical conductivity to the paper-based cathode and anode, commercially available eyeliner containing carbon nanoparticles and Fe 3 O 4 was directly employed as conductive ink without any binder. With an instant start-up, the as-fabricated biocompatible electrodes could hold bacteria in an active form at the anode allowing chemical oxidation of organic fuel producing current. The facile process delineated here can be employed for the tailored electrode fabrication of various flexible energy harnessing devices., (Copyright © 2017 Elsevier B.V. All rights reserved.)

As a kind of biomass resource, waste office paper can be used as a carbon precursor to prepare carbon materials. In this work, carbon microspheres with regular shape, uniform particle size and high carbon content were successfully prepared from waste office paper via a hydrothermal synthesis method with sulfuric acid as the catalyst. The effects of reaction temperature and sulfuric acid dosage on the morphology of the carbon microspheres were studied. The formation mechanism of the carbon microspheres was investigated by analyzing the structure and composition of the products. The results show that the hydrolysis of cellulose in waste paper under hydrothermal conditions was the key for the formation of carbon microspheres. The temperature of hydrothermal reaction and the use of sulfuric acid can affect the morphology of carbon microspheres. The carbon microspheres synthesized at 210 °C with 10 mL sulfuric acid have the best surface morphology, with uniform particle size and higher dispersion. Cyclic voltammetry and electrochemical impedance spectroscopy show that the carbon microspheres have good capacitance performance and can be used in capacitors. This study provides a low-cost precursor for carbon microspheres as well as a new method for the recycle of waste paper. [ABSTRACT FROM AUTHOR]

Copyright of Indonesian Journal of Forestry Research is the property of Indonesian Journal of Forestry Research and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Carbon fiber paper (CFP), a material frequently used as the diffusion layer in fuel cells, was found recently to exhibit a potential as an electrode for the development of sensitive, unmediated biosensors. After nitrogen plasma treatment, the CFP exhibited a quasi-reversible behavior to the redox couple (e.g., ferricyanide) with an electron transfer rate constant of 7.2 × 10(-3)cms(-1). This rate constant is approximately double that of a Pt-electrode and is much higher than that of many carbon-based electrodes. The unmediated CFP-based tyrosinase biosensor fabricated for this study exhibited an optimal working potential and operating pH value of -0.2V and 6.5, respectively. Compared to other unmediated tyrosinase biosensors, the CFP-based tyrosinase biosensor offers a high sensitivity for the monitoring of phenolic compounds (17.8, 7.1, 5.2 and 3.7 μA μM(-1)cm(-2) for catechol, phenol, bisphenol and 3-aminophenol, respectively). The lowest detection limit for catechol, phenol, bisphenol and 3-aminophenol was 2, 5, 5 and 12 nM, respectively. Furthermore, this biosensor exhibited a good repeatability, a fast response time (around 10s), and a wide linear dynamic range of detection for phenolic compounds., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Gold is among the highly conductive and stable materials, which are ideal anodes for microbial fuel cells (MFCs). However, previous studies have shown that bare gold surface is recalcitrant for the colonization of some exoelectrogens, e.g., Shewanella putrefacians. In this work, the problem regarding the poor bio-compatibility of gold as an anode material was sorted out through coupling it with carbon paper. A new composite anode material was fabricated through sputtering gold layer homogeneously on carbon paper matrix. Results of cyclic voltammetry and electrochemical impedance spectroscopy in Fe(CN)6(3-/4-) solution demonstrated better electrochemical performance of the carbon paper-gold (C-Au) composite than either carbon paper or bare gold, when they were used in MFCs. With Shewanella oneidensis MR-1 as the inoculum, the C-Au anode-based MFC produced total electric charges higher than the carbon-paper-anode-based MFC by 47%. The cyclic voltammetry analysis and the scanning electron microscopy observation showed that the MR-1 biofilm growth was accelerated when the carbon paper surface was sputtered with gold. Utilization of such a carbon paper-gold composite significantly enhanced the MFC performance., (Copyright © 2010 Elsevier B.V. All rights reserved.)

[Display omitted] Lithium metal is deemed a promising anode material for the next-generation batteries with high specific energy. Unfortunately, the growth of Li dendrites and infinite volume change during cycling, caused by the "hostless" feature of metallic Li, have posed a great challenge to the commercialization of Li metal anode. The introduction of appropriate host materials for Li metal is highly desirable. In this work, a N, P dual-doped 3D carbon derived from low-cost quantitative filter paper (NPCQP) is designed and fabricated for direct using as a host for Li metal anode. The resulting NPCQP host achieves a high deposition/stripping Coulombic efficiency of above 97.5 % with a low nucleation overpotential. Moreover, the NPCQP@Li symmetric cells enable an excellent long-term cycling performance (1000 h) with an ultralow voltage hysteresis (12 mV) and stable interface behavior. When paired with the commercial LiFePO 4 cathode, the full cell with NPCQP@Li anode displays impressive long-term cyclic stability and rate capability, outperforming the counter cell with bare Li anode. This contribution sheds light on the rational design of viable host for practical lithium metal anodes. [ABSTRACT FROM AUTHOR]

Forty-one bacterial strains isolated from the headbox water of two machines in a Canadian paper mill were associated with the genera Asticcacaulis, Acidovorax, Bacillus, Exiguobacterium, Hydrogenophaga, Pseudomonas, Pseudoxanthomonas, Staphylococcus, Stenotrophomonas based on the sequence of their 16S rRNA genes. The metabolic profile of these strains were determined using Biolog EcoPlate, and the bacteria were divided into four metabolic groups. Metabolic profiles of the bacterial communities colonizing the headbox water of two paper machines was also determined weekly over a 1 year period. The only compound that was not reduced by the bacterial community was 2-hydroxybenzoic acid. Utilization frequency of the other carbon sources in the Biolog EcoPlate ranged from 3 to 100%. The metabolic profiles of the bacterial community did not vary considerably between the two paper machines. However, the metabolic profile varied among the sampling dates.

The bagasse fly ash, obtained from the local sugar industry, has been used as an inexpensive and effective adsorbent for the removal of color from pulp and paper industry. Effect of various operating variables, viz., contact time, initial concentration, adsorbent dose and particle size on the removal of color has been studied and discussed. It is found that for optimum removal of color, contact time for adsorption equilibrium equals to 60 min., at dosage of 2 g/l of baggase fly ash. The material exhibits good removal capacity (86%) and follows both the Langmuir and the Freundlich models.

Carbon microsphere was successfully synthesized from waste office paper via hydrothermal method and high temperature treatment in nitrogen atmosphere. The process of carbon microsphere synthesis from waste office paper fiber using concentrated sulfuric acid was studied, and the influence of H2SO4 concentration and reaction time on the hydrolysis reaction was considered. To investigate the mechanism of conversion of waste office paper to carbon microsphere, Fourier transform infrared spectrometry was used to analyze the chemical composition of the supernatant liquid product and the non-carbonized carbon microsphere. The weight loss of the non-carbonized carbon microsphere was assessed through thermogravimetry. Scanning electron microscopy was used to analyze the morphology. The hydrolysis reaction of waste office paper fiber and synthesis mechanism of carbon microsphere under different conditions were evaluated. The results showed that when the reaction time reached 24 h, the product had uniform particle size and was well dispersed, and the more sulfuric acid present led to the waste office paper fiber being more thoroughly hydrolyzed. [ABSTRACT FROM AUTHOR]

Hydrophobic coatings on carbon paper electrodes are known to provide effective water management, superior gas transfer, and improved mechanical stability of the paper in fuel cell applications. Here, we describe the surface-initiated ring-opening metathesis polymerization (ROMP) of 5-(perfluorohexyl)norbornene (NBF6) to prepare fluorocarbon-rich films on carbon paper substrates that were pre-treated with O(2) plasma. For our reaction scheme, the growth of the pNBF6 films is dependent on the concentration of hydroxyl groups on the carbon paper substrate. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used to determine the required time for O(2) plasma exposure to saturate the surface with hydroxyl-termini. Complete, conformal pNBF6 films were grown on carbon paper electrodes exposed to O(2) plasma for at least 45 s. These films exhibit hydrophobic and oleophobic surface properties and serve as insulative barriers to the diffusion of aqueous ions to the conductive carbon fibers., (Copyright 2010 Elsevier Inc. All rights reserved.)

A carbonized interlayer effectively helps to improve the electrochemical performance of lithium–sulfur (Li–S) batteries. In this study, a simple and inexpensive carbon intermediate layer was fabricated using a traditional Korean paper called "hanji". This carbon interlayer has a fibrous porous structure, with a specific surface area of 91.82 m2 g−1 and a BJH adsorption average pore diameter of 26.63 nm. The prepared carbon interlayer was utilized as an intermediary layer in Li–S batteries to decrease the charge-transfer resistance and capture dissolved lithium polysulfides. The porous fiber-shaped carbon interlayer suppressed the migration of polysulfides produced during the electrochemical process. The carbon interlayer facilitates the adsorption of soluble lithium polysulfides, allowing for their re-utilization in subsequent cycles. Additionally, the carbon interlayer significantly reduces the polarization of the cell. This simple strategy results in a significant improvement in cycle performance. Consequently, the discharge capacity at 0.5 C after 150 cycles was confirmed to have improved by more than twofold, reaching 230 mAh g−1 for cells without the interlayer and 583 mAh g−1 for cells with the interlayer. This study demonstrates a simple method for improving the capacity of Li–S batteries by integrating a functional carbon interlayer. [ABSTRACT FROM AUTHOR]

The approach used to track the flow of carbon sequestered in the forest through harvest, processing into products, and final disposition of products is described. The methodology is broadly flexible and applicable to forest-based carbon balance assessments. A carbon balance is computed across all forestland ownerships for the production facility of interest. The balance considers forest uptake, harvest, combustion of fuels, emissions from process steps and losses from product use, disposition and recycling. The method also allows for sensitivity and marginal assessments of a variety of real and hypothetical situations using variable assumptions. Example results for a vertically integrated pulp and paper mill are presented. Results suggest that integrated forest products facilities drawing their raw material from sustainably managed forests can achieve a net positive carbon balance over the product cycle. The amount of net carbon sequestration attributable to such facilities depends upon a number of factors. The most critical of these include net forest growth, the method for allocating the growth in forest carbon among all of those harvesting from the drain area of a given facility, and the use and disposal patterns for the paper or wood products manufactured.

Nature-based Solutions (NbS) are integral to efforts to keep global warming below 2°C in accordance with the United Nations' 2015 Paris Agreement on Climate Change. Yet the transboundary governance dimensions of NbS remain unclear and largely undocumented. In Southeast Asia, NbS have emphasised the conservation and/ or sustainable commodification of carbon sinks found in terrestrial and mangrove forests, seagrass meadows, peatlands and agricultural soils. Mostly project-driven and fixed-term, these "solutions" have often failed to meet their social and ecological objectives. Increasingly, they have added to cross-border problems of: (1) displaced carbon emissions; and (2) economic migration and societal dispossession. This perspective paper delineates a transboundary governance research agenda to mitigate these trade-offs and enhance the co-benefits of NbS in carbon sinks. Building on NbS literature, it identifies cross-sector, multi-scalar and interdisciplinary pathways to improve transboundary cooperation, inclusion and equity in carbon sink governance in varying Southeast Asian contexts., (© 2023. The Author(s).)

Copyright of Journal of Harbin University of Science & Technology is the property of Journal of Harbin University of Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract Background There has been growing interest in the development of waste-specific decay factors for estimation of greenhouse gas emissions from landfills in national greenhouse gas inventories. Although engineered wood products (EWPs) and paper represent a substantial component of the solid waste stream, there is limited information available on their carbon dynamics in landfills. The objective of this study was to determine the extent of carbon loss for EWPs and paper products commonly used in Australia. Experiments were conducted under laboratory conditions designed to simulate optimal anaerobic biodegradation in a landfill. Results Methane generation rates over incubations of 307–677 days ranged from zero for medium-density fibreboard (MDF) to 326 mL CH4 g−1 for copy paper. Carbon losses for particleboard and MDF ranged from 0.7 to 1.6%, consistent with previous estimates. Carbon loss for the exterior wall panel product (2.8%) was consistent with the expected value for blackbutt, the main wood type used in its manufacture. Carbon loss for bamboo (11.4%) was significantly higher than for EWPs. Carbon losses for the three types of copy paper tested ranged from 72.4 to 82.5%, and were significantly higher than for cardboard (27.3–43.8%). Cardboard that had been buried in landfill for 20 years had a carbon loss of 27.3%—indicating that environmental conditions in the landfill did not support complete decomposition of the available carbon. Thus carbon losses for paper products as measured in bioreactors clearly overestimate those in actual landfills. Carbon losses, as estimated by gas generation, were on average lower than those derived by mass balance. The low carbon loss for particleboard and MDF is consistent with carbon loss for Australian wood types described in previous studies. A factor for carbon loss for combined EWPs and wood in landfills in Australia of 1.3% and for paper of 48% is proposed. Conclusions The new suggested combined decay factor for wood and EWPs represents a significant reduction from the current factor used in the Australian greenhouse gas inventory; whereas the suggested decay factor for paper is similar to the current decay factor. Our results improve current understanding of the carbon dynamics of harvested wood products, and allow more refined estimates of methane emissions from landfills.

The research proposes a model to estimate the carbon stock in mangrove forests from multispectral images from Landsat 8 and Sentinel 2B satellites. The Gramame River mangrove, located on the southern coast of Paraíba State, Brazil, was adopted as the study area. Carbon stocks in biomass, below and above ground, were measured from a forest inventory, and vegetation indices were processed on the Google Earth Engine (GEE) platform. To define the fit curves, linear and non-linear regressions were used. The choice of the model considered the highest coefficients of determination (R 2 ), the biomass and carbon stock were estimated from the equations. The biomass carbon stock, calculated from field data, corresponded to 22.27 Gg C, equivalent to 81.75 Gg CO 2 , with 13.85 Gg C (50.84 Gg CO 2 ) and 8.42 Gg C (30.91 Gg CO 2 ) stored in biomass above and below ground, respectively. Among the models fitted to the indices calculated from Landsat 8 images, NDVI was the one that best explained the spatial distribution of biomass and carbon, with 90.26%. For Sentinel 2B, SAVI was able to explain 80.76%. The total estimated plant carbon stocks corresponded to 26.66 Gg (16.20 Gg C above and 10.36 Gg C below ground) for Landsat 8 and 27.76 Gg C (16.93 Gg C above and 10.83 Gg C below ground) for Sentinel 2B. The proposed work methodology and the suggested mathematical models can be replicated to analyze carbon stocks in other locations, especially in the Americas, because they share the same species., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Pulp mill effluent was treated by different advanced oxidation processes (AOPs) consisting of UV, UV/H2O2, TiO2-assisted photo-catalysis (UV/TiO2) and UV/H2O2/TiO2 in lab-scale reactors for total organic carbon (TOC) and toxicity removals. Effects of some operating parameters such as the initial pH, oxidant and catalyst concentrations on TOC and toxicity removals were investigated. Almost every method resulted in some degree of TOC and toxicity removal from the pulp mill effluent. However, the TiO2-assisted photo-catalysis (UV/TiO2) resulted in the highest TOC and toxicity removals under alkaline conditions when compared with the other AOPs tested. Approximately, 79.6% TOC and 94% toxicity removals were obtained by the TiO2-assisted photo-catalysis (UV/TiO2) with a titanium dioxide concentration of 0.75gl(-1) at pH 11 within 60min.

Abstract Black liquor, an industrial waste, also generally called spent liquor is a promising feedstock for production of bio-carbon due to its high lignin and energy contents. Mild processing conditions and sustainable resource utilization can drive commercial utilization of this industrial waste. A novel oxidative procedure using hydrogen peroxide as a green liquid oxidant at room temperature for processing of paper recycling neutral sulphite semi-chemical spent liquor was established and evaluations were carried out for its efficiency. Standard hydrothermal carbonization was carried out for comparing bio-carbon production qualitatively and quantitatively using the same spent liquor. The oxidation procedure was performed at room temperature using 5% of H 2 O 2 followed by washing in diluted sulfuric acid (0.15 N) while hydrothermal carbonization was performed at 250 °C. The bio-carbon produced were similar in terms of ash percentage and ranged from 1.25 ± 0.05 to 1.48 ± 0.05% for oxidation method and from 1.11 ± 0.03 to 1.45 ± 0.04% for hydrothermal carbonization. The carbon contents for the oxidation method ranged from 60.54 to 61.50% and 66.81–67.31% for hydrothermal carbonization while higher heating values ranged from 25.32 to 26.11 MJ/kg and from 28.68 to 29.34 MJ/kg respectively. The mass yield ranged from 29.98 to 31.88% by the oxidation, while it was 15.02–16.08% by hydrothermal carbonization. Highlights • Bio-carbon is generated from byproduct of plant that uses recycled paper feedstock. • Oxidation method is a promising approach to obtain pure bio-carbon from spent liquor. • Hydrothermal carbonization demands energy for pure bio-carbon production. • Bio-carbon from both methods differ quantitatively but are similar qualitatively. • Bio-carbon can be a potential platform for environmental friendly fuel and materials. [ABSTRACT FROM AUTHOR]

The carbon oxides (CO2 and CO) in the insulating oil of power transformers come from the thermal aging of cellulosic insulating paper; the CO2/CO ratio can reflect the aging state of cellulosic insulating paper. At present, the formation mechanisms of CO2 and CO in oil-immersed power transformers are still unclear. In this article, the ReaxFF reaction force field is used to simulate the thermal aging process of cellulosic insulating paper, and the main reaction pathways of CO2 and CO molecules formed by cellulose pyrolysis are obtained. The study finds that the amount of CO2 and CO generated is related to temperature. When the pyrolysis temperature continues to rise, the amount of CO2 generated shows a downward trend, while the amount of CO generated continues to increase, and the CO2/CO ratio continues to decrease. The simulation results are consistent with the previous experimental results. Through pathway tracking, it is found that the CO2 and CO molecules are mainly derived from certain specific atoms of cellulose molecules. The COSMO-RS module is used to analyze the change trend of the solubility of CO2 and CO in insulating oil with temperature. The results show that the solubility of CO2 and CO decreases with the increase of insulating oil temperature, which provides theoretical support for accurate application of carbon oxides aging evaluation index at different temperatures. [ABSTRACT FROM AUTHOR]