Search

In determining wind loads when designing buildings—especially high-rise buildings—wind speed is a critical factor. With increased progression of city high-rise construction, accurate prediction has become ever more important. Many factors, such as local climates, roughness of surrounding conditions, and terrain, may affect wind speed. But among all factors considered, terrain has a very large influence. Difficulties in reflecting the influence of terrain on wind speed include (1) collecting topographic data information; (2) quantitatively evaluating terrain features; and (3) expressing specific area relationships with surrounding observation stations. This paper poses means to solve these limitations by (1) using satellite imagery to gather topographic information; (2) evaluating terrain quantitatively with convolutional neural network (CNN)–based encoders; and (3) employing a graph neural network (GNN) to estimate the wind speed relationship of an arbitrary place to that of observation stations. Herein, a machine learning model utilizing the aforementioned means was proposed. To support this model, an experiment was conducted using observed wind speed data in Korea. Throughout the experiment, previous studies were used to compare results with ratification of the posed model. Given the submitted findings, further research and investigation to establish correlation with other experimental case results are proposed. [ABSTRACT FROM AUTHOR]

The most important thing to operate a power system is that the power supply should be close to the power demand. In order to predict the amount of electric power transaction (EPT), it is important to choose and decide the variable and its starting date. In this paper, variables that could be acquired one the starting day of prediction were chosen. This paper designated date, temperature and special day as variables to predict the amount of EPT of the Korea Electric Power company. This paper also used temperature data from a year ago to predict the next year. To do this, we proposed single deep learning algorithms and hybrid deep learning algorithms. The former included multi-layer perceptron (MLP), convolution neural network (CNN), long short-term memory (LSTM), gated recurrent unit (GRU), support vector machine regression (SVR), and adaptive network-based fuzzy inference system (ANFIS). The latter included LSTM + CNN and CNN + LSTM. We then confirmed the improvement of accuracy for prediction using pre-processed variables compared to original variables We also assigned two years of test data during 2017–2018 as variable data to measure high prediction accuracy. We then selected a high-accuracy algorithm after measuring root mean square error (RMSE) and mean absolute percent error (MAPE). Finally, we predicted the amount of EPT in 2018 and then measured the error for each proposed algorithm. With these acquired error data, we obtained a model for predicting the amount of EPT with a high accuracy. [ABSTRACT FROM AUTHOR]

Coronavirus 2019 (COVID-19) has posed a serious threat to the lives and health of the majority of people worldwide. Since the early days of the outbreak, South Korea's government and citizens have made persistent efforts to provide effective prevention against further spread of the disease. In particular, the participation of individual citizens in complying with the necessary code of conduct to prevent spread of the infection, through measures such as social distancing and mask wearing, is as instrumental as the geographical tracking of the trajectory of the infected. In this paper, we propose an activity recognition method based on a wristband equipped with an IR array and inertial measurement unit (IMU) to detect individual compliance with codes of personal hygiene management, such as mask wearing, which are recommended to prevent the spread of infectious diseases. The results of activity recognition were comparatively analyzed by applying conventional machine learning algorithms and convolutional neural networks (CNNs) to the IMU time series and IR array thermal images collected from 25 subjects. When CNN and 24 × 32 thermal images were used, 97.8% accuracy was achieved (best performance), and when 6 × 8 low-resolution thermal images were used, similar performance with 97.1% accuracy was obtained. In the case of using IMU, the performance of activity recognition was lower than that obtained with the IR array, but an accuracy of 93% was achieved even in the case of applying machine learning algorithms, indicating that it is more suitable for wearable devices with low computational capability. [ABSTRACT FROM AUTHOR]

The energy manufacturers are required to produce an accurate amount of energy by meeting the energy requirements at the end-user side. Consequently, energy prediction becomes an essential role in the electric industrial zone. In this paper, we propose the hybrid ensemble deep learning model, which combines multilayer perceptron (MLP), convolutional neural network (CNN), long short-term memory (LSTM), and hybrid CNN-LSTM to improve the forecasting performance. These DL architectures are more popular and better than other machine learning (ML) models for time series electrical load prediction. Therefore, hourly-based energy data are collected from Jeju Island, South Korea, and applied for forecasting. We considered external features associated with meteorological conditions affecting energy. Two-year training and one-year testing data are preprocessed and arranged to reform the times series, which are then trained in each DL model. The forecasting results of the proposed ensemble model are evaluated by using mean square error (MSE), mean absolute error (MAE), and mean absolute percentage error (MAPE). Error metrics are compared with DL stand-alone models such as MLP, CNN, LSTM, and CNN-LSTM. Our ensemble model provides better performance than other forecasting models, providing minimum MAPE at 0.75%, and was proven to be inherently symmetric for forecasting time-series energy and demand data, which is of utmost concern to the power system sector. [ABSTRACT FROM AUTHOR]

Yoon, J.; Kim, S.; Kim, I., and Song, D., 2021. Detection of wave parameters using CCTV images-based on deep learning algorithm. In: Lee, J.L.; Suh, K.-S.; Lee, B.; Shin, S., Lee, J. (eds.), Crisis and Integrated Management for Coastal and Marine Safety. Journal of Coastal Research, Special Issue No. 114, pp. 281–284. Coconut Creek (Florida), ISSN 0749-0208. The closed-circuit television (CCTV) systems have been used for various applications in oceanic research fields. CCTV is an effective installation method for offshore monitoring that can conveniently and continuously observe the coastal region using the visible or infrared light in the electromagnetic spectrum. However, in the case of wave-observing CCTV images, there is a problem: it is difficult to extract the corresponding feature points between the video frames, which causes of inaccurate measurement of wave parameters. Recently, in the field of machine learning technology, deep learning-based video analysis that does not require the detection of feature points has been proposed. In this paper, we analyze wave-observing CCTV images with deep learning method in particular convolution neural network, and find the optimal method of observing waves through CCTV by three different datasets. For training, the CCTV data from the Samcheok Beach in the Republic of Korea were used. Wave observation data, which were used as input for machine learning, were collected by an acoustic wave and current profiler (AWAC). Moreover, to make up for insufficient observation data, the data to enhance the prediction model through deep learning were augmented. The results of this study confirm that the deep learning algorithm can be utilized to detect wave period and wave height. Consequently, continuous CCTV images can be combined with deep learning algorithm to clarify the complex characteristics of wave distribution and its temporal changes. [ABSTRACT FROM AUTHOR]

The aim of this study is to evaluate and compare the performances of 5 machine learning (ML) techniques for predicting the spatial probability of landslide at Atsuma, Japan, and Mt. Umyeon, Korea. 5 ML models used are Naïve Bayes (NB), ensemble learning (random forest (RF) and adaboost (AB)), and deep learning (multilayer perceptron (MLP) and convolutional neural network (CNN)) models. Real landslide events at the study areas are randomly separated to the training set for landslide mapping and the validation set for assessing performance. To assess the performance of the used models, the resulting models are validated using receiver operating characteristic (ROC) curve. The success rate curves show that the areas under the curve (AUC) for the NB, RF, AB, MLP, and CNN are 85.1, 88.8, 88.6, 87.5, and 95.0%, respectively, at Atsuma and 68.7, 85.6, 90.5, 81.6, and 92.0%, respectively, at Mt. Umyeon. Similarly, the validation results show that the areas under the curve for the NB, RF, AB, MLP, and CNN are 84.3, 87.1, 87.1, 86.7, and 89.7%, respectively, at Atsuma and 64.9, 85.5, 83.9, 84.7, and 90.5%, respectively, at Mt. Umyeon. In addition, statistical tests such as Chi-square test and difference of proportions test show that all classified landslide susceptibility maps have statistical significance and the significant difference in classified landslide susceptibility maps from different ML models. The comparison results among 5 ML models show that the CNN model had the best performance and NB model had the worst performance in both study areas. [ABSTRACT FROM AUTHOR]

As the deep learning algorithm has become a popular data analysis technique, atmospheric scientists should have a balanced perception of its strengths and limitations so that they can provide a powerful analysis of complex data with well-established procedures. Despite the enormous success of the algorithm in numerous applications, certain issues related to its applications in air quality forecasting (AQF) require further analysis and discussion. This study addresses significant limitations of an advanced deep learning algorithm, the convolutional neural network (CNN), in two common applications: (i) a real-time AQF model and (ii) a post-processing tool in a dynamical AQF model, the Community Multi-scale Air Quality Model (CMAQ). In both cases, the CNN model shows promising accuracy for ozone prediction 24 h in advance in both the United States of America and South Korea (with an overall index of agreement exceeding 0.8). For the first case, we use the wavelet transform to determine the reasons behind the poor performance of CNN during the nighttime, cold months, and high-ozone episodes. We find that when fine wavelet modes (hourly and daily) are relatively weak or when coarse wavelet modes (weekly) are strong, the CNN model produces less accurate forecasts. For the second case, we use the dynamic time warping (DTW) distance analysis to compare post-processed results with their CMAQ counterparts (as a base model). For CMAQ results that show a consistent DTW distance from the observation, the post-processing approach properly addresses the modeling bias with predicted indexes of agreement exceeding 0.85. When the DTW distance of CMAQ versus observation is irregular, the post-processing approach is unlikely to perform satisfactorily. Awareness of the limitations in CNN models will enable scientists to develop more accurate regional or local air quality forecasting systems by identifying the affecting factors in high-concentration episodes. [ABSTRACT FROM AUTHOR]