Search

The superconducting undulator (SCU) is a trend to be applied for future light sources to obtain the higher light brilliance. A planar SCU prototype with a period of 16 mm, a magnetic gap of 9.5 mm and 50-periods magnet has been under development at the Shanghai Synchrotron Radiation Facility (SSRF) since late 2013. The key technologies including magnet cooling, coil winding, low-temperature alignment of magnet and beam tube, and cryogenic magnetic field measurement have been investigated. A cryocooler-cooled test cryostat was developed for the purpose of both experimentally studying the key technologies and testing the performance of the SCU prototype. Two-stage cryocoolers were applied for cool down, helium liquefaction and keeping the SCU cooled at operation. The SCU magnet and the UHV beam tube were cooled separately. The magnet working at 4.2 K is cooled by thermosiphon-driven liquid helium flowing through the piping in the magnet mandrel. The beam tube, thermal shields and binary leads were conduction-cooled. The beam tube will work at between 4.2 K and 20 K up to dynamic loads generated by the SSRF beam. A set of improved self-centered support assembly for the magnet was developed in order to avoid the complex alignment at low temperature and lower down the machining cost. A cooling approach to effectively cool the junction of the binary lead made of copper and HTS lead commonly used in cryocooler-cooled superconducting systems was adopted and validated. The cryostat was successfully debugged and run at the early of 2016. This paper describes the design details of the cryostat including new approaches to cool the SCU and the binary leads, its fabrication and test results. [ABSTRACT FROM AUTHOR]

Highlights: [•] Energy performance of business buildings in different climate zones was investigated. [•] Exergy analysis method is used in the process of air cooling and dehumidification. [•] The effect of humidity on energy/exergy is greater than the effect of temperature. [•] Determining indoor temperature and humidity should associate with outdoor climate. [ABSTRACT FROM AUTHOR]

Abstract: In hot summer and cold winter zone in China, air conditioning system has four running modes yearly including cooling with dehumidification, cooling, dehumidification and heating in residential buildings. The conventional air source heat pump (ASHP) system is not designed to independently control temperature and humidity, and is not very suitable for the dehumidification mode in the view of building energy consumption. A novel ASHP system combining radiant cooling/heating for residential buildings was presented. The main feature of this hybrid ASHP system is that desiccant wheel and cooling coil accomplish dehumidification process together, and the regenerative heat needed by the desiccant wheel is supplied by the condenser dissipated heat. Based on simulation studies and performance analysis, this paper predicts the primary energy consumption of the hybrid ASHP system in comparison with the conventional ASHP system during the cooling and heating seasons. It was found that primary energy requirement can be reduced by more than 8% in cooling with dehumidification mode, by 50% in dehumidification mode, and by more than 14% in heating mode. The study results prove that the hybrid ASHP system can keep great energy saving and running cost saving yearly, especially in the dehumidification process. [Copyright &y& Elsevier]