Search

In determining wind loads when designing buildings—especially high-rise buildings—wind speed is a critical factor. With increased progression of city high-rise construction, accurate prediction has become ever more important. Many factors, such as local climates, roughness of surrounding conditions, and terrain, may affect wind speed. But among all factors considered, terrain has a very large influence. Difficulties in reflecting the influence of terrain on wind speed include (1) collecting topographic data information; (2) quantitatively evaluating terrain features; and (3) expressing specific area relationships with surrounding observation stations. This paper poses means to solve these limitations by (1) using satellite imagery to gather topographic information; (2) evaluating terrain quantitatively with convolutional neural network (CNN)–based encoders; and (3) employing a graph neural network (GNN) to estimate the wind speed relationship of an arbitrary place to that of observation stations. Herein, a machine learning model utilizing the aforementioned means was proposed. To support this model, an experiment was conducted using observed wind speed data in Korea. Throughout the experiment, previous studies were used to compare results with ratification of the posed model. Given the submitted findings, further research and investigation to establish correlation with other experimental case results are proposed. [ABSTRACT FROM AUTHOR]

In predicting energy consumption, classic econometric and statistical models are used to forecast energy consumption. These models may have limitations in an increasingly fast-changing energy market, which requires big data analysis of energy consumption patterns and relevant variables using complex mathematical tools. In current literature, there are minimal comparison studies reviewing machine learning algorithms to predict energy consumption in Korea. To bridge this gap, this paper compared three different machine learning algorithms, namely the Random Forest (RF) model, XGBoost (XGB) model, and Long Short-Term Memory (LSTM) model. These algorithms were applied in Period 1 (prior to the onset of the COVID-19 pandemic) and Period 2 (after the onset of the COVID-19 pandemic). Period 1 was characterized by an upward trend in energy consumption, while Period 2 showed a reduction in energy consumption. LSTM performed best in its prediction power specifically in Period 1, and RF outperformed the other models in Period 2. Findings, therefore, suggested the applicability of machine learning to forecast energy consumption and also demonstrated that traditional econometric approaches may outperform machine learning when there is less unknown irregularity in the time series, but machine learning can work better with unexpected irregular time series data. [ABSTRACT FROM AUTHOR]

The most important thing to operate a power system is that the power supply should be close to the power demand. In order to predict the amount of electric power transaction (EPT), it is important to choose and decide the variable and its starting date. In this paper, variables that could be acquired one the starting day of prediction were chosen. This paper designated date, temperature and special day as variables to predict the amount of EPT of the Korea Electric Power company. This paper also used temperature data from a year ago to predict the next year. To do this, we proposed single deep learning algorithms and hybrid deep learning algorithms. The former included multi-layer perceptron (MLP), convolution neural network (CNN), long short-term memory (LSTM), gated recurrent unit (GRU), support vector machine regression (SVR), and adaptive network-based fuzzy inference system (ANFIS). The latter included LSTM + CNN and CNN + LSTM. We then confirmed the improvement of accuracy for prediction using pre-processed variables compared to original variables We also assigned two years of test data during 2017–2018 as variable data to measure high prediction accuracy. We then selected a high-accuracy algorithm after measuring root mean square error (RMSE) and mean absolute percent error (MAPE). Finally, we predicted the amount of EPT in 2018 and then measured the error for each proposed algorithm. With these acquired error data, we obtained a model for predicting the amount of EPT with a high accuracy. [ABSTRACT FROM AUTHOR]

Coronavirus 2019 (COVID-19) has posed a serious threat to the lives and health of the majority of people worldwide. Since the early days of the outbreak, South Korea's government and citizens have made persistent efforts to provide effective prevention against further spread of the disease. In particular, the participation of individual citizens in complying with the necessary code of conduct to prevent spread of the infection, through measures such as social distancing and mask wearing, is as instrumental as the geographical tracking of the trajectory of the infected. In this paper, we propose an activity recognition method based on a wristband equipped with an IR array and inertial measurement unit (IMU) to detect individual compliance with codes of personal hygiene management, such as mask wearing, which are recommended to prevent the spread of infectious diseases. The results of activity recognition were comparatively analyzed by applying conventional machine learning algorithms and convolutional neural networks (CNNs) to the IMU time series and IR array thermal images collected from 25 subjects. When CNN and 24 × 32 thermal images were used, 97.8% accuracy was achieved (best performance), and when 6 × 8 low-resolution thermal images were used, similar performance with 97.1% accuracy was obtained. In the case of using IMU, the performance of activity recognition was lower than that obtained with the IR array, but an accuracy of 93% was achieved even in the case of applying machine learning algorithms, indicating that it is more suitable for wearable devices with low computational capability. [ABSTRACT FROM AUTHOR]

Yoon, J.; Kim, S.; Kim, I., and Song, D., 2021. Detection of wave parameters using CCTV images-based on deep learning algorithm. In: Lee, J.L.; Suh, K.-S.; Lee, B.; Shin, S., Lee, J. (eds.), Crisis and Integrated Management for Coastal and Marine Safety. Journal of Coastal Research, Special Issue No. 114, pp. 281–284. Coconut Creek (Florida), ISSN 0749-0208. The closed-circuit television (CCTV) systems have been used for various applications in oceanic research fields. CCTV is an effective installation method for offshore monitoring that can conveniently and continuously observe the coastal region using the visible or infrared light in the electromagnetic spectrum. However, in the case of wave-observing CCTV images, there is a problem: it is difficult to extract the corresponding feature points between the video frames, which causes of inaccurate measurement of wave parameters. Recently, in the field of machine learning technology, deep learning-based video analysis that does not require the detection of feature points has been proposed. In this paper, we analyze wave-observing CCTV images with deep learning method in particular convolution neural network, and find the optimal method of observing waves through CCTV by three different datasets. For training, the CCTV data from the Samcheok Beach in the Republic of Korea were used. Wave observation data, which were used as input for machine learning, were collected by an acoustic wave and current profiler (AWAC). Moreover, to make up for insufficient observation data, the data to enhance the prediction model through deep learning were augmented. The results of this study confirm that the deep learning algorithm can be utilized to detect wave period and wave height. Consequently, continuous CCTV images can be combined with deep learning algorithm to clarify the complex characteristics of wave distribution and its temporal changes. [ABSTRACT FROM AUTHOR]

Air pollution is a critical problem that is of major concern worldwide. South Korea is one of the countries most affected by air pollution. Rapid urbanization and industrialization in South Korea have induced air pollution in multiple forms, such as smoke from factories and exhaust from vehicles. In this paper, we perform a comparative analysis of predictive models for fine particulate matter in Daejeon, the fifth largest city in South Korea. This study is conducted for three purposes. The first purpose is to determine the factors that may cause air pollution. Two main factors are considered: meteorological and traffic. The second purpose is to find an optimal predictive model for air pollutant concentration. We apply machine learning and deep learning models to the collected dataset to predict hourly air pollutant concentrations. The accuracy of the deep learning models is better than that of the machine learning models. The third purpose is to analyze the influence of road conditions on predicting air pollutant concentration. Experimental results demonstrate that considering wind direction and wind speed could significantly decrease the error rate of the predictive models. [ABSTRACT FROM AUTHOR]

The energy manufacturers are required to produce an accurate amount of energy by meeting the energy requirements at the end-user side. Consequently, energy prediction becomes an essential role in the electric industrial zone. In this paper, we propose the hybrid ensemble deep learning model, which combines multilayer perceptron (MLP), convolutional neural network (CNN), long short-term memory (LSTM), and hybrid CNN-LSTM to improve the forecasting performance. These DL architectures are more popular and better than other machine learning (ML) models for time series electrical load prediction. Therefore, hourly-based energy data are collected from Jeju Island, South Korea, and applied for forecasting. We considered external features associated with meteorological conditions affecting energy. Two-year training and one-year testing data are preprocessed and arranged to reform the times series, which are then trained in each DL model. The forecasting results of the proposed ensemble model are evaluated by using mean square error (MSE), mean absolute error (MAE), and mean absolute percentage error (MAPE). Error metrics are compared with DL stand-alone models such as MLP, CNN, LSTM, and CNN-LSTM. Our ensemble model provides better performance than other forecasting models, providing minimum MAPE at 0.75%, and was proven to be inherently symmetric for forecasting time-series energy and demand data, which is of utmost concern to the power system sector. [ABSTRACT FROM AUTHOR]

Due to the availability of smart metering infrastructure, high-resolution electric consumption data is readily available to study the dynamics of residential electric consumption at finely resolved spatial and temporal scales. Analyzing the electric consumption data enables the policymakers and building owners to understand consumer's demand-consumption behaviors. Furthermore, analysis and accurate forecasting of electric consumption are substantial for consumer involvement in time-of-use tariffs, critical peak pricing, and consumer-specific demand response initiatives. Alongside its vast economic and sustainability implications, such as energy wastage and decarbonization of the energy sector, accurate consumption forecasting facilitates power system planning and stable grid operations. Energy consumption forecasting is an active research area; despite the abundance of devised models, electric consumption forecasting in residential buildings remains challenging due to high occupant energy use behavior variability. Hence the search for an appropriate model for accurate electric consumption forecasting is ever continuing. To this aim, this paper presents a spatial and temporal ensemble forecasting model for short-term electric consumption forecasting. The proposed work involves exploring electric consumption profiles at the apartment level through cluster analysis based on the k-means algorithm. The ensemble forecasting model consists of two deep learning models; Long Short-Term Memory Unit (LSTM) and Gated Recurrent Unit (GRU). First, the apartment-level historical electric consumption data is clustered. Later the clusters are aggregated based on consumption profiles of consumers. At the building and floor level, the ensemble models are trained using aggregated electric consumption data. The proposed ensemble model forecasts the electric consumption at three spatial scales apartment, building, and floor level for hourly, daily, and weekly forecasting horizon. Furthermore, the impact of spatial-temporal granularity and cluster analysis on the prediction accuracy is analyzed. The dataset used in this study comprises high-resolution electric consumption data acquired through smart meters recorded on an hourly basis over the period of one year. The consumption data belongs to four multifamily residential buildings situated in an urban area of South Korea. To prove the effectiveness of our proposed forecasting model, we compared our model with widely known machine learning models and deep learning variants. The results achieved by our proposed ensemble scheme verify that model has learned the sequential behavior of electric consumption by producing superior performance with the lowest MAPE of 4.182 and 4.54 at building and floor level prediction, respectively. The experimental findings suggest that the model has efficiently captured the dynamic electric consumption characteristics to exploit ensemble model diversities and achieved lower forecasting error. The proposed ensemble forecasting scheme is well suited for predictive modeling and short-term load forecasting. [ABSTRACT FROM AUTHOR]

With the development of modern power systems (smart grid), energy consumption prediction becomes an essential aspect of resource planning and operations. In the last few decades, industrial and commercial buildings have thoroughly been investigated for consumption patterns. However, due to the unavailability of data, the residential buildings could not get much attention. During the last few years, many solutions have been devised for predicting electric consumption; however, it remains a challenging task due to the dynamic nature of residential consumption patterns. Therefore, a more robust solution is required to improve the model performance and achieve a better prediction accuracy. This paper presents an ensemble approach based on learning to a statistical model to predict the short-term energy consumption of a multifamily residential building. Our proposed approach utilizes Long Short-Term Memory (LSTM) and Kalman Filter (KF) to build an ensemble prediction model to predict short term energy demands of multifamily residential buildings. The proposed approach uses real energy data acquired from the multifamily residential building, South Korea. Different statistical measures are used, such as mean absolute error (MAE), root mean square error (RMSE), mean absolute percentage error (MAPE), and R 2 score, to evaluate the performance of the proposed approach and compare it with existing models. The experimental results reveal that the proposed approach predicts accurately and outperforms the existing models. Furthermore, a comparative analysis is performed to evaluate and compare the proposed model with conventional machine learning models. The experimental results show the effectiveness and significance of the proposed approach compared to existing energy prediction models. The proposed approach will support energy management to effectively plan and manage the energy supply and demands of multifamily residential buildings. [ABSTRACT FROM AUTHOR]