Search

In reconfigurable intelligent surface (RIS)-assisted symbiotic radio (SR), the RIS acts as a secondary transmitter by modulating its information bits over the incident primary signal and simultaneously assists the primary transmission, then a cooperative receiver is used to jointly decode the primary and secondary signals. Most existing works of SR focus on using RIS to enhance the reflecting link while ignoring the ambiguity problem for the joint detection caused by the multiplication relationship of the primary and secondary signals. Particularly, in case of a blocked direct link, joint detection will suffer from severe performance loss due to the ambiguity, when using the conventional on-off keying and binary phase shift keying modulation schemes for RIS. To address this issue, we propose a novel modulation scheme for RIS-assisted SR that divides the phase-shift matrix into two components: the symbol-invariant and symbol-varying components, which are used to assist the primary transmission and carry the secondary signal, respectively. To design these two components, we focus on the detection of the composite signal formed by the primary and secondary signals, through which a problem of minimizing the bit error rate (BER) of the composite signal is formulated to improve both the BER performance of the primary and secondary ones. By solving the problem, we derive the closed-form solution of the optimal symbol-invariant and symbol-varying components, which is related to the channel strength ratio of the direct link to the reflecting link. Moreover, theoretical BER performance is analyzed. Finally, simulation results show the superiority of the proposed modulation scheme over its conventional counterpart., Comment: 16 pages,16 figures

This paper studies implicit surface reconstruction leveraging differentiable ray casting. Previous works such as IDR and NeuS overlook the spatial context in 3D space when predicting and rendering the surface, thereby may fail to capture sharp local topologies such as small holes and structures. To mitigate the limitation, we propose a flexible neural implicit representation leveraging hierarchical voxel grids, namely Neural Deformable Anchor (NeuDA), for high-fidelity surface reconstruction. NeuDA maintains the hierarchical anchor grids where each vertex stores a 3D position (or anchor) instead of the direct embedding (or feature). We optimize the anchor grids such that different local geometry structures can be adaptively encoded. Besides, we dig into the frequency encoding strategies and introduce a simple hierarchical positional encoding method for the hierarchical anchor structure to flexibly exploit the properties of high-frequency and low-frequency geometry and appearance. Experiments on both the DTU and BlendedMVS datasets demonstrate that NeuDA can produce promising mesh surfaces., Comment: Accepted to CVPR 2023, project page: https://3d-front-future.github.io/neuda

This paper studies how to flexibly integrate reconstructed 3D models into practical 3D modeling pipelines such as 3D scene creation and rendering. Due to the technical difficulty, one can only obtain rough 3D models (R3DMs) for most real objects using existing 3D reconstruction techniques. As a result, physically-based rendering (PBR) would render low-quality images or videos for scenes that are constructed by R3DMs. One promising solution would be representing real-world objects as Neural Fields such as NeRFs, which are able to generate photo-realistic renderings of an object under desired viewpoints. However, a drawback is that the synthesized views through Neural Fields Rendering (NFR) cannot reflect the simulated lighting details on R3DMs in PBR pipelines, especially when object interactions in the 3D scene creation cause local shadows. To solve this dilemma, we propose a lighting transfer network (LighTNet) to bridge NFR and PBR, such that they can benefit from each other. LighTNet reasons about a simplified image composition model, remedies the uneven surface issue caused by R3DMs, and is empowered by several perceptual-motivated constraints and a new Lab angle loss which enhances the contrast between lighting strength and colors. Comparisons demonstrate that LighTNet is superior in synthesizing impressive lighting, and is promising in pushing NFR further in practical 3D modeling workflows., Comment: Accepted by IEEE Transactions on Pattern Analysis and Machine Intelligence (T-PAMI), project page: http://3d-front-future.github.io/LighTNet

Neural Radiance Fields (NeRF) have emerged as a potent paradigm for representing scenes and synthesizing photo-realistic images. A main limitation of conventional NeRFs is that they often fail to produce high-quality renderings under novel viewpoints that are significantly different from the training viewpoints. In this paper, instead of exploiting few-shot image synthesis, we study the novel view extrapolation setting that (1) the training images can well describe an object, and (2) there is a notable discrepancy between the training and test viewpoints' distributions. We present RapNeRF (RAy Priors) as a solution. Our insight is that the inherent appearances of a 3D surface's arbitrary visible projections should be consistent. We thus propose a random ray casting policy that allows training unseen views using seen views. Furthermore, we show that a ray atlas pre-computed from the observed rays' viewing directions could further enhance the rendering quality for extrapolated views. A main limitation is that RapNeRF would remove the strong view-dependent effects because it leverages the multi-view consistency property.

Ecosystem services are the direct and indirect contributions of an ecosystem to human well-being and survival. Ecosystem valuation is a method of assigning a monetary value to an ecosystem with its goods and services,often referred to as ecosystem service value (ESV). With the rapid expansion of cities, a mismatch occurs between urban development and ecological development, and it is increasingly urgent to establish a valid ecological assessment method. In this study, we propose an ecological evaluation standard framework by designing an ESV monitoring workflow based on the establishment of multi-level grids. The proposed method is able to capture multi-scale features, facilitates multi-level spatial expression, and can effectively reveal the spatial heterogeneity of ESV. Taking Haian city in the Jiangsu province as the study case, we implemented the proposed dynamic multi-level grids-based (DMLG) to calculate its urban ESV in 2016 and 2019. We found that the ESV of Haian city showed considerable growth (increased by 24.54 million RMB). Negative ESVs are concentrated in the central city, which presented a rapid trend of outward expansion. The results illustrated that the ongoing urban expanse does not reduce the ecological value in the study area. The proposed unified grid framework can be applied to other geographical regions and is expected to benefit future studies in ecosystem service evaluation in terms of capture multi-level spatial heterogeneity.

Adapting semantic segmentation models to new domains is an important but challenging problem. Recently enlightening progress has been made, but the performance of existing methods are unsatisfactory on real datasets where the new target domain comprises of heterogeneous sub-domains (e.g., diverse weather characteristics). We point out that carefully reasoning about the multiple modalities in the target domain can improve the robustness of adaptation models. To this end, we propose a condition-guided adaptation framework that is empowered by a special attentive progressive adversarial training (APAT) mechanism and a novel self-training policy. The APAT strategy progressively performs condition-specific alignment and attentive global feature matching. The new self-training scheme exploits the adversarial ambivalences of easy and hard adaptation regions and the correlations among target sub-domains effectively. We evaluate our method (DCAA) on various adaptation scenarios where the target images vary in weather conditions. The comparisons against baselines and the state-of-the-art approaches demonstrate the superiority of DCAA over the competitors., Comment: Accepted to AAAI 2021

We introduce 3D-FRONT (3D Furnished Rooms with layOuts and semaNTics), a new, large-scale, and comprehensive repository of synthetic indoor scenes highlighted by professionally designed layouts and a large number of rooms populated by high-quality textured 3D models with style compatibility. From layout semantics down to texture details of individual objects, our dataset is freely available to the academic community and beyond. Currently, 3D-FRONT contains 18,968 rooms diversely furnished by 3D objects, far surpassing all publicly available scene datasets. In addition, the 13,151 furniture objects all come with high-quality textures. While the floorplans and layout designs are directly sourced from professional creations, the interior designs in terms of furniture styles, color, and textures have been carefully curated based on a recommender system we develop to attain consistent styles as expert designs. Furthermore, we release Trescope, a light-weight rendering tool, to support benchmark rendering of 2D images and annotations from 3D-FRONT. We demonstrate two applications, interior scene synthesis and texture synthesis, that are especially tailored to the strengths of our new dataset. The project page is at: https://tianchi.aliyun.com/specials/promotion/alibaba-3d-scene-dataset., Comment: Project page: https://tianchi.aliyun.com/specials/promotion/alibaba-3d-scene-dataset

Machine-type communications (MTC) devices in 5G will use the Non-orthogonal multiple access (NOMA) technology for massive connections. These devices switch between the transmission mode and the sleep mode for battery saving; and their applications may have diverse quality of service (QoS) requirements. In this paper, we develop a new uplink energy-efficient power control scheme for multiple MTC devices with the above mode transition capability and different QoS requirements. By using the effective bandwidth and the effective capacity models, the system's energy efficiency can be formulated as the ratio of the sum effective capacity to the sum energy consumption. Two new analytical models are used in system's energy efficiency maximization problem: 1) two-mode circuitry model and 2) accurate delay-outage approximation model. Simulation shows our proposed scheme is capable of providing exact delay QoS guarantees for NOMA systems.

This study briefly introduces the development of Shantou Special Economic Zone under Reform and Opening-Up Policy from 1980 through 2016 with a focus on policy making issues and its influences on local economy. This paper is divided into two parts, 1980 to 1991, 1992 to 2016 in accordance with the separation of the original Shantou District into three cities: Shantou, Chaozhou and Jieyang in the end of 1991. This study analyzes the policy making issues in the separation of the original Shantou District, the influences of the policy on Shantou's economy after separation, the possibility of merging the three cities into one big new economic district in the future and reasons that lead to the stagnant development of Shantou in recent 20 years. This paper uses statistical longitudinal analysis in analyzing economic problems with applications of non-parametric statistics through generalized additive model and time series forecasting methods. The paper is authored by Bowen Cai solely, who is the graduate student in the PhD program of Applied and Computational Mathematics and Statistics at the University of Notre Dame with concentration in big data analysis., Comment: 28 pages

The purpose of this study was to build a customer selection model based on 20 dimensions, including customer codes, total contribution, assets, deposit, profit, profit rate, trading volume, trading amount, turnover rate, order amount, withdraw amount, withdraw rate, process fee, process fee submitted, process fee retained, net process fee retained, interest revenue, interest return, exchange house return I and exchange house return II to group and rank customers. The traditional way to group customers in securities or futures companies is simply based on their assets. However, grouping customers with respect to only one dimension cannot give us a full picture about customers' attributions. It is hard to group customers' with similar attributions or values into one group if we just consider assets as the only grouping criterion. Nowadays, securities or futures companies usually group customers based on managers' experience with lack of quantitative analysis, which is not effective. Therefore, we use kmeans unsupervised learning methods to group customers with respect to significant dimensions so as to cluster customers with similar attributions together. Grouping is our first step. It is the horizontal analysis in customer study. The next step is customer ranking. It is the longitudinal analysis. It ranks customers by assigning each customer with a certain score given by our weighted customer value calculation formula. Therefore, by grouping and ranking customers, we can differentiate our customers and rank them based on values instead of blindly reaching everyone., Comment: 24 pages, Preliminary Report