Search

An end-to-end network traffic matrix is significantly helpful for network management and for Software Defined Networks (SDN). However, the end-to-end network traffic matrix's inferences and estimations are a challenging problem. Moreover, attaining the traffic matrix in high-speed networks for SDN is a prohibitive challenge. This paper investigates how to estimate and recover the end-to-end network traffic matrix in fine time granularity from the sampled traffic traces, which is a hard inverse problem. Different from previous methods, the fractal interpolation is used to reconstruct the finer-granularity network traffic. Then, the cubic spline interpolation method is used to obtain the smooth reconstruction values. To attain an accurate the end-to-end network traffic in fine time granularity, we perform a weighted-geometric-average process for two interpolation results that are obtained. The simulation results show that our approaches are feasible and effective. [ABSTRACT FROM AUTHOR]

The DEM generalization is the basis of multi-dimensional observation, the basis of expressing and analyzing the terrain. DEM is also the core of building the Multi-Scale Geographic Database. Thus, many researchers have studied both the theory and the method of DEM generalization. This paper proposed a new method of generalizing terrain, which extracts feature points based on the tree model construction which considering the nested relationship of watershed characteristics. The paper used the 5 m resolution DEM of the Jiuyuan gully watersheds in the Loess Plateau as the original data and extracted the feature points in every single watershed to reconstruct the DEM. The paper has achieved generalization from 1:10000 DEM to 1:50000 DEM by computing the best threshold. The best threshold is 0.06. In the last part of the paper, the height accuracy of the generalized DEM is analyzed by comparing it with some other classic methods, such as aggregation, resample, and VIP based on the original 1:50000 DEM. The outcome shows that the method performed well. The method can choose the best threshold according to the target generalization scale to decide the density of the feature points in the watershed. Meanwhile, this method can reserve the skeleton of the terrain, which can meet the needs of different levels of generalization. Additionally, through overlapped contour contrast, elevation statistical parameters and slope and aspect analysis, we found out that the W8D algorithm performed well and effectively in terrain representation. [ABSTRACT FROM AUTHOR]

Generating synthetic baseline populations is a fundamental step of agent-based modeling and simulation, which is growing fast in a wide range of socio-economic areas including transportation planning research. Traditionally, in many commercial and non-commercial microsimulation systems, the iterative proportional fitting (IPF) procedure has been used for creating the joint distribution of individuals when combining a reference joint distribution with target marginal distributions. Although IPF is simple, computationally efficient, and rigorously founded, it is unclear whether IPF well preserves the dependence structure of the reference joint table sufficiently when fitting it to target margins. In this paper, a novel method is proposed based on the copula concept in order to provide an alternative approach to the problem that IPF resolves. The dependency characteristic measures were computed and the results from the proposed method and IPF were compared. In most test cases, the proposed method outperformed IPF in preserving the dependence structure of the reference joint distribution. [ABSTRACT FROM AUTHOR]

A new Interpolation based Reversible Data Hiding (IRDH) scheme is reported in this paper. For different applications of an IRDH scheme to the digital image, video, multimedia, big-data and biological data, the embedding capacity requirement usually varies. Disregarding this important consideration, existing IRDH schemes do not offer a better embedding rate-distortion performance for varying size payloads. To attain this varying capacity requirement with our proposed adaptive embedding, we formulate a capacity control parameter and propose to utilize it to determine a minimum set of embeddable bits in a pixel. Additionally, we use a logical (or bit-wise) correlation between the embeddable pixel and estimated versions of an embedded pixel. Thereby, while a higher range between an upper and lower limit of the embedding capacity is maintained, a given capacity requirement within that limit is also attained with a better-embedded image quality. Computational modeling of all new processes of the scheme is presented, and performance of the scheme is evaluated with a set of popular test-images. Experimental results of our proposed scheme compared to the prominent IRDH schemes have recorded a significantly better-embedding rate-distortion performance. [ABSTRACT FROM AUTHOR]

We describe in this paper the experimental procedure, the data treatment and the quantification of the black body correction: an experimental approach to compensate for scattering and systematic biases in quantitative neutron imaging based on experimental data. The correction algorithm is based on two steps; estimation of the scattering component and correction using an enhanced normalization formula. The method incorporates correction terms into the image normalization procedure, which usually only includes open beam and dark current images (open beam correction). Our aim is to show its efficiency and reproducibility: we detail the data treatment procedures and quantitatively investigate the effect of the correction. Its implementation is included within the open source CT reconstruction software MuhRec. The performance of the proposed algorithm is demonstrated using simulated and experimental CT datasets acquired at the ICON and NEUTRA beamlines at the Paul Scherrer Institut. [ABSTRACT FROM AUTHOR]

Sparse spectral clustering (SSC) has become one of the most popular clustering approaches in recent years. However, its high computational complexity prevents its application to large-scale datasets such as hyperspectral images (HSIs). In this paper, we propose two efficient approximate sparse spectral clustering methods for HSIs clustering in which clustering performance is improved by utilizing local information among the data. Firstly, we construct a smaller representative dataset on which sparse spectral clustering is performed. Then the labels of ground object are extending to whole dataset based on the local information according to two extending strategies. The first one is that the local interpolation is utilized to improve the extension of the clustering result. The other one is that the label extension is turned to a problem of subspace embedding, and is fulfilled by locally linear embedding (LLE). Several experiments on HSIs demonstrated that the proposed algorithms are effective for HSIs clustering. [ABSTRACT FROM AUTHOR]

Motion capture allows accurate recording of human motion, with applications in many fields, including entertainment, medicine, sports science and human computer interaction. A common difficulty with this technology is the occurrence of missing data, due to occlusions, or recording conditions. Various models have been proposed to estimate missing data. Some are based on interpolation, low-rank properties or inter-correlations. Others involve dataset matching or skeleton constraints. While the latter have the advantage of promoting a realistic motion estimation, they require prior knowledge of skeleton constraints, or the availability of a prerecorded dataset. In this article, we propose a probabilistic averaging method of several recovery models (referred to as Probabilistic Model Averaging (PMA) in this paper), based on the likelihoods of the distances between body points. This method has the advantage of being automatic, while allowing an efficient gap data recovery. To support and validate the proposed method, we use a set of four individual recovery models, based on linear/nonlinear regression in local coordinate systems. Finally, we propose two heuristic algorithms to enforce skeleton constraints in the reconstructed motion, which can be used on any individual recovery model. For validation purposes, random gaps were introduced into motion-capture sequences, and the effects of factors such as the number of simultaneous gaps, gap length and sequence duration were analyzed. Results show that the proposed probabilistic averaging method yields better recovery than (i) each of the four individual models and (ii) two recent state-of-the-art models, regardless of gap length, sequence duration and number of simultaneous gaps. Moreover, both of our heuristic skeleton-constraint algorithms significantly improve the recovery for 7 out of 8 tested motion-capture sequences (p < 0.05), for 10 simultaneous gaps of 5 seconds. The code is available for free download at: . [ABSTRACT FROM AUTHOR]

Craniofacial registration is used to establish the point-to-point correspondence in a unified coordinate system among human craniofacial models. It is the foundation of craniofacial reconstruction and other craniofacial statistical analysis research. In this paper, a non-rigid 3D craniofacial registration method using thin-plate spline transform and cylindrical surface projection is proposed. First, the gradient descent optimization is utilized to improve a cylindrical surface fitting (CSF) for the reference craniofacial model. Second, the thin-plate spline transform (TPST) is applied to deform a target craniofacial model to the reference model. Finally, the cylindrical surface projection (CSP) is used to derive the point correspondence between the reference and deformed target models. To accelerate the procedure, the iterative closest point ICP algorithm is used to obtain a rough correspondence, which can provide a possible intersection area of the CSP. Finally, the inverse TPST is used to map the obtained corresponding points from the deformed target craniofacial model to the original model, and it can be realized directly by the correspondence between the original target model and the deformed target model. Three types of registration, namely, reflexive, involutive and transitive registration, are carried out to verify the effectiveness of the proposed craniofacial registration algorithm. Comparison with the methods in the literature shows that the proposed method is more accurate. [ABSTRACT FROM AUTHOR]

The availability of digital X-ray detectors, together with advances in reconstruction algorithms, creates an opportunity for bringing 3D capabilities to conventional radiology systems. The downside is that reconstruction algorithms for non-standard acquisition protocols are generally based on iterative approaches that involve a high computational burden. The development of new flexible X-ray systems could benefit from computer simulations, which may enable performance to be checked before expensive real systems are implemented. The development of simulation/reconstruction algorithms in this context poses three main difficulties. First, the algorithms deal with large data volumes and are computationally expensive, thus leading to the need for hardware and software optimizations. Second, these optimizations are limited by the high flexibility required to explore new scanning geometries, including fully configurable positioning of source and detector elements. And third, the evolution of the various hardware setups increases the effort required for maintaining and adapting the implementations to current and future programming models. Previous works lack support for completely flexible geometries and/or compatibility with multiple programming models and platforms. In this paper, we present FUX-Sim, a novel X-ray simulation/reconstruction framework that was designed to be flexible and fast. Optimized implementation for different families of GPUs (CUDA and OpenCL) and multi-core CPUs was achieved thanks to a modularized approach based on a layered architecture and parallel implementation of the algorithms for both architectures. A detailed performance evaluation demonstrates that for different system configurations and hardware platforms, FUX-Sim maximizes performance with the CUDA programming model (5 times faster than other state-of-the-art implementations). Furthermore, the CPU and OpenCL programming models allow FUX-Sim to be executed over a wide range of hardware platforms. [ABSTRACT FROM AUTHOR]

A fast and robust interpolation filter based on finite difference TPS has been proposed in this paper. The proposed method employs discrete cosine transform to efficiently solve the linear system of TPS equations in case of gridded data, and by a pre-defined weight function with respect to simulation residuals to reduce the effect of outliers and misclassified non-ground points on the accuracy of reference ground surface construction. Fifteen groups of benchmark datasets, provided by the International Society for Photogrammetry and Remote Sensing (ISPRS) commission, were employed to compare the performance of the proposed method with that of the multi-resolution hierarchical classification method (MHC). Results indicate that with respect to kappa coefficient and total error, the proposed method is averagely more accurate than MHC. Specifically, the proposed method is 1.03 and 1.32 times as accurate as MHC in terms of kappa coefficient and total errors. More importantly, the proposed method is averagely more than 8 times faster than MHC. In comparison with some recently developed methods, the proposed algorithm also achieves a good performance. [ABSTRACT FROM AUTHOR]

The scientific demand for more accurate modeling of the climate system calls for more computing power to support higher resolutions, inclusion of more component models, more complicated physics schemes, and larger ensembles. As the recent improvements in computing power mostly come from the increasing number of nodes in a system and the integration of heterogeneous accelerators, how to scale the computing problems onto more nodes and various kinds of accelerators has become a challenge for the model development. This paper describes our efforts on developing a highly scalable framework for performing global atmospheric modeling on heterogeneous supercomputers equipped with various accelerators, such as GPU (Graphic Processing Unit), MIC (Many Integrated Core), and FPGA (Field Programmable Gate Arrays) cards. We propose a generalized partition scheme of the problem domain, so as to keep a balanced utilization of both CPU resources and accelerator resources. With optimizations on both computing and memory access patterns, we manage to achieve around 8 to 20 times speedup when comparing one hybrid GPU or MIC node with one CPU node with 12 cores. Using a customized FPGA-based data-flow engines, we see the potential to gain another 5 to 8 times improvement on performance. On heterogeneous supercomputers, such as Tianhe-1A and Tianhe-2, our framework is capable of achieving ideally linear scaling efficiency, and sustained double-precision performances of 581 Tflops on Tianhe-1A (using 3750 nodes) and 3.74 Pflops on Tianhe-2 (using 8644 nodes). Our study also provides an evaluation on the programming paradigm of various accelerator architectures (GPU, MIC, FPGA) for performing global atmospheric simulation, to form a picture about both the potential performance benefits and the programming efforts involved. [ABSTRACT FROM AUTHOR]

Anonymity, which is more and more important to multi-receiver schemes, has been taken into consideration by many researchers recently. To protect the receiver anonymity, in 2010, the first multi-receiver scheme based on the Lagrange interpolating polynomial was proposed. To ensure the sender’s anonymity, the concept of the ring signature was proposed in 2005, but afterwards, this scheme was proven to has some weakness and at the same time, a completely anonymous multi-receiver signcryption scheme is proposed. In this completely anonymous scheme, the sender anonymity is achieved by improving the ring signature, and the receiver anonymity is achieved by also using the Lagrange interpolating polynomial. Unfortunately, the Lagrange interpolation method was proven a failure to protect the anonymity of receivers, because each authorized receiver could judge whether anyone else is authorized or not. Therefore, the completely anonymous multi-receiver signcryption mentioned above can only protect the sender anonymity. In this paper, we propose a new completely anonymous multi-receiver signcryption scheme with a new polynomial technology used to replace the Lagrange interpolating polynomial, which can mix the identity information of receivers to save it as a ciphertext element and prevent the authorized receivers from verifying others. With the receiver anonymity, the proposed scheme also owns the anonymity of the sender at the same time. Meanwhile, the decryption fairness and public verification are also provided. [ABSTRACT FROM AUTHOR]

Sodium is an integral part of water, and its excessive amount in drinking water causes high blood pressure and hypertension. In the present paper, spatial distribution of sodium concentration in drinking water is modeled and optimized sampling designs for selecting sampling locations is calculated for three divisions in Punjab, Pakistan. Universal kriging and Bayesian universal kriging are used to predict the sodium concentrations. Spatial simulated annealing is used to generate optimized sampling designs. Different estimation methods (i.e., maximum likelihood, restricted maximum likelihood, ordinary least squares, and weighted least squares) are used to estimate the parameters of the variogram model (i.e, exponential, Gaussian, spherical and cubic). It is concluded that Bayesian universal kriging fits better than universal kriging. It is also observed that the universal kriging predictor provides minimum mean universal kriging variance for both adding and deleting locations during sampling design. [ABSTRACT FROM AUTHOR]

This paper introduces the Fuzzy Logic Hypercube Interpolator (FLHI) and demonstrates applications in control of multiple-input single-output (MISO) and multiple-input multiple-output (MIMO) processes with Hammerstein nonlinearities. FLHI consists of a Takagi-Sugeno fuzzy inference system where membership functions act as kernel functions of an interpolator. Conjunction of membership functions in an unitary hypercube space enables multivariable interpolation of N-dimensions. Membership functions act as interpolation kernels, such that choice of membership functions determines interpolation characteristics, allowing FLHI to behave as a nearest-neighbor, linear, cubic, spline or Lanczos interpolator, to name a few. The proposed interpolator is presented as a solution to the modeling problem of static nonlinearities since it is capable of modeling both a function and its inverse function. Three study cases from literature are presented, a single-input single-output (SISO) system, a MISO and a MIMO system. Good results are obtained regarding performance metrics such as set-point tracking, control variation and robustness. Results demonstrate applicability of the proposed method in modeling Hammerstein nonlinearities and their inverse functions for implementation of an output compensator with Model Based Predictive Control (MBPC), in particular Dynamic Matrix Control (DMC). [ABSTRACT FROM AUTHOR]

This paper examines the application of a bootstrap test error estimation of radial basis functions, specifically thin-plate spline fitting, in surface smoothing. The presence of noisy data is a common issue of the point set model that is generated from 3D scanning devices, and hence, point set denoising is one of the main concerns in point set modelling. Bootstrap test error estimation, which is applied when searching for the smoothing parameters of radial basis functions, is revisited. The main contribution of this paper is a smoothing algorithm that relies on a bootstrap-based radial basis function. The proposed method incorporates a k-nearest neighbour search and then projects the point set to the approximated thin-plate spline surface. Therefore, the denoising process is achieved, and the features are well preserved. A comparison of the proposed method with other smoothing methods is also carried out in this study. [ABSTRACT FROM AUTHOR]

We introduce a fast error-free tracking method applicable to sequences of two and three dimensional images. The core idea is to use Quadtree (resp. Octree) data structures for representing the spatial discretization of an image in two (resp. three) spatial dimensions. This representation enables one to merge into large computational cells the regions that can be faithfully described with such a coarse representation, thus significantly reducing the total number of degrees of freedom that are processed, without compromising accuracy. This encoding is particularly effective in the case of algorithms based on moving fronts, since the adaptive refinement provides a natural means to focus the processing resources on information near the moving front. In this paper, we use an existing contour based tracker and reformulate it to the case of Quad-/Oc-tree data structures. Relevant mathematical assumptions and derivations are presented for this purpose. We then demonstrate that, on standard bio-medical image sequences, a speed up of 5X is easily achieved in 2D and about 10X in 3D. [ABSTRACT FROM AUTHOR]

Aims: The 3D geometry of individual vascular smooth muscle cells (VSMCs), which are essential for understanding the mechanical function of blood vessels, are currently not available. This paper introduces a new 3D segmentation algorithm to determine VSMC morphology and orientation. Methods and Results: A total of 112 VSMCs from six porcine coronary arteries were used in the analysis. A 3D semi-automatic segmentation method was developed to reconstruct individual VSMCs from cell clumps as well as to extract the 3D geometry of VSMCs. A new edge blocking model was introduced to recognize cell boundary while an edge growing was developed for optimal interpolation and edge verification. The proposed methods were designed based on Region of Interest (ROI) selected by user and interactive responses of limited key edges. Enhanced cell boundary features were used to construct the cell’s initial boundary for further edge growing. A unified framework of morphological parameters (dimensions and orientations) was proposed for the 3D volume data. Virtual phantom was designed to validate the tilt angle measurements, while other parameters extracted from 3D segmentations were compared with manual measurements to assess the accuracy of the algorithm. The length, width and thickness of VSMCs were 62.9±14.9μm, 4.6±0.6μm and 6.2±1.8μm (mean±SD). In longitudinal-circumferential plane of blood vessel, VSMCs align off the circumferential direction with two mean angles of -19.4±9.3° and 10.9±4.7°, while an out-of-plane angle (i.e., radial tilt angle) was found to be 8±7.6° with median as 5.7°. Conclusions: A 3D segmentation algorithm was developed to reconstruct individual VSMCs of blood vessel walls based on optical image stacks. The results were validated by a virtual phantom and manual measurement. The obtained 3D geometries can be utilized in mathematical models and leads a better understanding of vascular mechanical properties and function. [ABSTRACT FROM AUTHOR]

Delay represents a significant phenomenon in the dynamics of many human-related systems—including biological ones. It has i.a. a decisive impact on system stability, and the study of this influence is often mathematically demanding. This paper presents a computationally simple numerical gridding algorithm for the determination of stability margin delay values in multiple-delay linear systems. The characteristic quasi-polynomial—the roots of which decide about stability—is subjected to iterative discretization by means of pre-warped bilinear transformation. Then, a linear and a quadratic interpolation are applied to obtain the associated characteristic polynomial with integer powers. The roots of the associated characteristic polynomial are closely related to the estimation of roots of the original characteristic quasi-polynomial which agrees with the system′s eigenvalues. Since the stability border is crossed by the leading one, the switching root locus is enhanced using the Regula Falsi interpolation method. Our methodology is implemented on—and verified by—a numerical bio-cybernetic example of the stabilization of a human-being′s movement on a controlled swaying bow. The advantage of the proposed novel algorithm lies in the possibility of the rapid computation of polynomial zeros by means of standard programs for technical computing; in the low level of mathematical knowledge required; and, in the sufficiently high precision of the roots loci estimation. The relationship to the direct search QuasiPolynomial (mapping) Rootfinder algorithm and computational complexity are discussed as well. This algorithm is also applicable for systems with non-commensurate delays. [ABSTRACT FROM AUTHOR]

A precise frequency synchronization detection method is proposed based on the group quantization steeping law. Based on the different-frequency group quantization phase processing, high-precision frequency synchronization can be achieved by measuring phase comparison result quantization. If any repeated phase differences in the quantized phase comparison results are used as the starting and stopping signal of the counter gate, the time interval between identical phase differences is a group period as gate time. By measuring and analyzing the quantized phase comparison results, the ±1−word counting error is overcome in the traditional frequency synchronization detection method, and the system response time is significantly shortened. The experimental results show that the proposed frequency synchronization detection method is advanced and scientific. The measurement resolution is notably stable and the frequency stability better than the E-12/s level can be obtained. The method is superior to the traditional frequency synchronization detection method in many aspects, such as system reliability and stability, detection speed, development cost, power consumption and volume. [ABSTRACT FROM AUTHOR]

We present a novel intensity-gradient based algorithm specifically designed for nanometer-segmentation of cell membrane contours obtained with high-resolution optical microscopy combined with high-velocity digital imaging. The algorithm relies on the image oversampling performance and computational power of graphical processing units (GPUs). Both, synthetic and experimental data are used to quantify the sub-pixel precision of the algorithm, whose analytic performance results comparatively higher than in previous methods. Results from the synthetic data indicate that the spatial precision of the presented algorithm is only limited by the signal-to-noise ratio (SNR) of the contour image. We emphasize on the application of the new algorithm to membrane fluctuations (flickering) in eukaryotic cells, bacteria and giant vesicle models. The method shows promising applicability in several fields of cellular biology and medical imaging for nanometer-precise boundary-determination and mechanical fingerprinting of cellular membranes in optical microscopy images. Our implementation of this high-precision flicker spectroscopy contour tracking algorithm (HiPFSTA) is provided as open-source at . [ABSTRACT FROM AUTHOR]

Probabilistic formalism of quantum mechanics is used to quantitatively link the global scale mass potential with the underlying electrical activity of excitable cells. Previous approaches implemented methods of classical physics to reconstruct the mass potential in terms of explicit physical models of participating cells and the volume conductor. However, the multiplicity of cellular processes with extremely intricate mixtures of deterministic and random factors prevents the creation of consistent biophysical parameter sets. To avoid the uncertainty inherent in physical attributes of cell ensembles, we undertake here a radical departure from deterministic equations of classical physics, instead applying the probabilistic reasoning of quantum mechanics. Crucial steps include: (1) the relocation of the elementary bioelectric sources from a cellular to a molecular level; (2) the creation of microscale particle models in terms of a non-homogenous birth-and-death process. To link the microscale processes with macroscale potentials, time-frequency analysis was applied for estimation of the empirical characteristic functions for component waveforms of electroencephalogram (EEG), eye-blink electromyogram (EMG), and electrocardiogram (ECG). We describe universal models for the amplitude spectra and phase functions of functional components of mass potentials. The corresponding time domain relationships disclose the dynamics of mass potential components as limit distribution functions produced by specific microscale transients. The probabilistic laws governing the microscale machinery, founded on an empirical basis, are presented. Computer simulations of particle populations with time dependent transition probabilities reveal that hidden deterministic chaos underlies development of the components of mass potentials. We label this kind of behaviour “transient deterministic chaos”. [ABSTRACT FROM AUTHOR]

With the introduction of various advanced deep learning algorithms, initiatives for image classification systems have transitioned over from traditional machine learning algorithms (e.g., SVM) to Convolutional Neural Networks (CNNs) using deep learning software tools. A prerequisite in applying CNN to real world applications is a system that collects meaningful and useful data. For such purposes, Wireless Image Sensor Networks (WISNs), that are capable of monitoring natural environment phenomena using tiny and low-power cameras on resource-limited embedded devices, can be considered as an effective means of data collection. However, with limited battery resources, sending high-resolution raw images to the backend server is a burdensome task that has direct impact on network lifetime. To address this problem, we propose an energy-efficient pre- and post- processing mechanism using image resizing and color quantization that can significantly reduce the amount of data transferred while maintaining the classification accuracy in the CNN at the backend server. We show that, if well designed, an image in its highly compressed form can be well-classified with a CNN model trained in advance using adequately compressed data. Our evaluation using a real image dataset shows that an embedded device can reduce the amount of transmitted data by ∼71% while maintaining a classification accuracy of ∼98%. Under the same conditions, this process naturally reduces energy consumption by ∼71% compared to a WISN that sends the original uncompressed images. [ABSTRACT FROM AUTHOR]

Objective: To develop an algorithm for automated quantification of Haller’s layer in choroid using swept-source optical coherence tomography (OCT). Background: So far, to understand the association of various diseases with structural changes of choroid, only gross indicators such as thickness, volume and vascularity index have been examined. However, certain diseases affect specific sublayers of the choroid. Accordingly, a need for targeted quantitation arises. In particular, there is significant interest in understanding Haller’s layer, a choroidal sublayer comprising relatively large blood vessels. Unfortunately, its intricate vasculature makes, manual quantitation difficult, tedious, and error-prone. To surmount this difficulty, it is imperative to develop an algorithmic method. Methodology: The primary contribution of this work consists in developing an approach for detecting the boundary between Haller’s and Sattler’s layers, the latter comprising medium-sized vessels. The proposed algorithm estimates vessel cross-sections using exponentiation-based binarization, and labels a vessel large if its cross-section exceeds certain statistically determined threshold. Finally, the desired boundary is obtained as a smooth curve joining the innermost points of such large vessels. On 50 OCT B-scans (of 50 healthy eyes), our algorithm was validated both qualitatively and quantitatively, by comparing with intra-observer variability. Extensive statistical analysis was performed using metrics including Dice coefficient (DC), correlation coefficient (CC) and absolute difference (AD). Results: The proposed algorithm achieved a mean DC of 89.48% (SD:5.03%) in close agreement with the intra-observer repeatability of 89.12% (SD:5.68%). Corresponding mean AD and mean CC were of 17.54 μm (SD:16.45μm) and 98.10% (SD:1.60%) which too approximate the respective intra-observer repeatability values 19.19 μm (SD:17.69 μm) and 98.58% (SD:1.12%). Conclusion: High correlation between algorithmic and manual delineations indicates suitability of our algorithm for clinically analyzing choroid in greater finer details, especially, in diseased eyes. [ABSTRACT FROM AUTHOR]

One method of solving the single-image super-resolution problem is to use Heaviside functions. This has been done previously by making a binary classification of image components as “smooth” and “non-smooth”, describing these with approximated Heaviside functions (AHFs), and iteration including l1 regularization. We now introduce a new method in which the binary classification of image components is extended to different degrees of smoothness and non-smoothness, these components being represented by various classes of AHFs. Taking into account the sparsity of the non-smooth components, their coefficients are l1 regularized. In addition, to pick up more image details, the new method uses an iterative refinement for the residuals between the original low-resolution input and the downsampled resulting image. Experimental results showed that the new method is superior to the original AHF method and to four other published methods. [ABSTRACT FROM AUTHOR]

Particle and object tracking is gaining attention in industrial applications and is commonly applied in: colloidal, biophysical, ecological, and micro-fluidic research. Reliable tracking information is heavily dependent on the system under study and algorithms that correctly determine particle position between images. However, in a real environmental context with the presence of noise including particular or dissolved matter in water, and low and fluctuating light conditions, many algorithms fail to obtain reliable information. We propose a new algorithm, the Circular Symmetry algorithm (C-Sym), for detecting the position of a circular particle with high accuracy and precision in noisy conditions. The algorithm takes advantage of the spatial symmetry of the particle allowing for subpixel accuracy. We compare the proposed algorithm with four different methods using both synthetic and experimental datasets. The results show that C-Sym is the most accurate and precise algorithm when tracking micro-particles in all tested conditions and it has the potential for use in applications including tracking biota in their environment. [ABSTRACT FROM AUTHOR]

Knowledge of the location of muscle Innervation Zones (IZs) is important in many applications, e.g. for minimizing the quantity of injected botulinum toxin for the treatment of spasticity or for deciding on the type of episiotomy during child delivery. Surface EMG (sEMG) can be noninvasively recorded to assess physiological and morphological characteristics of contracting muscles. However, it is not often possible to record signals of high quality. Moreover, muscles could have multiple IZs, which should all be identified. We designed a fully-automatic algorithm based on the enhanced image Graph-Cut segmentation and morphological image processing methods to identify up to five IZs in 60-ms intervals of very-low to moderate quality sEMG signal detected with multi-channel electrodes (20 bipolar channels with Inter Electrode Distance (IED) of 5 mm). An anisotropic multilayered cylinder model was used to simulate 750 sEMG signals with signal-to-noise ratio ranging from -5 to 15 dB (using Gaussian noise) and in each 60-ms signal frame, 1 to 5 IZs were included. The micro- and macro- averaged performance indices were then reported for the proposed IZ detection algorithm. In the micro-averaging procedure, the number of True Positives, False Positives and False Negatives in each frame were summed up to generate cumulative measures. In the macro-averaging, on the other hand, precision and recall were calculated for each frame and their averages are used to determine F1-score. Overall, the micro (macro)-averaged sensitivity, precision and F1-score of the algorithm for IZ channel identification were 82.7% (87.5%), 92.9% (94.0%) and 87.5% (90.6%), respectively. For the correctly identified IZ locations, the average bias error was of 0.02±0.10 IED ratio. Also, the average absolute conduction velocity estimation error was 0.41±0.40 m/s for such frames. The sensitivity analysis including increasing IED and reducing interpolation coefficient for time samples was performed. Meanwhile, the effect of adding power-line interference and using other image interpolation methods on the deterioration of the performance of the proposed algorithm was investigated. The average running time of the proposed algorithm on each 60-ms sEMG frame was 25.5±8.9 (s) on an Intel dual-core 1.83 GHz CPU with 2 GB of RAM. The proposed algorithm correctly and precisely identified multiple IZs in each signal epoch in a wide range of signal quality and is thus a promising new offline tool for electrophysiological studies. [ABSTRACT FROM AUTHOR]

The detection of short exons is a challenging open problem in the field of bioinformatics. Due to the fact that the weakness of existing model-independent methods lies in their inability to reliably detect small exons, a model-independent method based on the singularity detection with wavelet transform modulus maxima has been developed for detecting short coding sequences (exons) in eukaryotic DNA sequences. In the analysis of our method, the local maxima can capture and characterize singularities of short exons, which helps to yield significant patterns that are rarely observed with the traditional methods. In order to get some information about singularities on the differences between the exon signal and the background noise, the noise level is estimated by filtering the genomic sequence through a notch filter. Meanwhile, a fast method based on a piecewise cubic Hermite interpolating polynomial is applied to reconstruct the wavelet coefficients for improving the computational efficiency. In addition, the output measure of a paired-numerical representation calculated in both forward and reverse directions is used to incorporate a useful DNA structural property. The performances of our approach and other techniques are evaluated on two benchmark data sets. Experimental results demonstrate that the proposed method outperforms all assessed model-independent methods for detecting short exons in terms of evaluation metrics. [ABSTRACT FROM AUTHOR]

Modern soil mapping is characterised by the need to interpolate point referenced (geostatistical) observations and the availability of large numbers of environmental characteristics for consideration as covariates to aid this interpolation. Modelling tasks of this nature also occur in other fields such as biogeography and environmental science. This analysis employs the Least Angle Regression (LAR) algorithm for fitting Least Absolute Shrinkage and Selection Operator (LASSO) penalized Multiple Linear Regressions models. This analysis demonstrates the efficiency of the LAR algorithm at selecting covariates to aid the interpolation of geostatistical soil carbon observations. Where an exhaustive search of the models that could be constructed from 800 potential covariate terms and 60 observations would be prohibitively demanding, LASSO variable selection is accomplished with trivial computational investment. [ABSTRACT FROM AUTHOR]

We describe a physics-based data compression method inspired by the photonic time stretch wherein information-rich portions of the data are dilated in a process that emulates the effect of group velocity dispersion on temporal signals. With this coding operation, the data can be downsampled at a lower rate than without it. In contrast to previous implementation of the warped stretch compression, here the decoding can be performed without the need of phase recovery. We present rate-distortion analysis and show improvement in PSNR compared to compression via uniform downsampling. [ABSTRACT FROM AUTHOR]

In this study, an improved Data INterpolating Empirical Orthogonal Functions (DINEOF) algorithm for determination of missing values in a spatio-temporal dataset is presented. Compared with the ordinary DINEOF algorithm, the iterative reconstruction procedure until convergence based on every fixed EOF to determine the optimal EOF mode is not necessary and the convergence criterion is only reached once in the improved DINEOF algorithm. Moreover, in the ordinary DINEOF algorithm, after optimal EOF mode determination, the initial matrix with missing data will be iteratively reconstructed based on the optimal EOF mode until the reconstruction is convergent. However, the optimal EOF mode may be not the best EOF for some reconstructed matrices generated in the intermediate steps. Hence, instead of using asingle EOF to fill in the missing data, in the improved algorithm, the optimal EOFs for reconstruction are variable (because the optimal EOFs are variable, the improved algorithm is called VE-DINEOF algorithm in this study). To validate the accuracy of the VE-DINEOF algorithm, a sea surface temperature (SST) data set is reconstructed by using the DINEOF, I-DINEOF (proposed in 2015) and VE-DINEOF algorithms. Four parameters (Pearson correlation coefficient, signal-to-noise ratio, root-mean-square error, and mean absolute difference) are used as a measure of reconstructed accuracy. Compared with the DINEOF and I-DINEOF algorithms, the VE-DINEOF algorithm can significantly enhance the accuracy of reconstruction and shorten the computational time. [ABSTRACT FROM AUTHOR]

In recent years, comprehensive learning particle swarm optimization (CLPSO) has attracted the attention of many scholars for using in solving multimodal problems, as it is excellent in preserving the particles’ diversity and thus preventing premature convergence. However, CLPSO exhibits low solution accuracy. Aiming to address this issue, we proposed a novel algorithm called LILPSO. First, this algorithm introduced a Lagrange interpolation method to perform a local search for the global best point (gbest). Second, to gain a better exemplar, one gbest, another two particle’s historical best points (pbest) are chosen to perform Lagrange interpolation, then to gain a new exemplar, which replaces the CLPSO’s comparison method. The numerical experiments conducted on various functions demonstrate the superiority of this algorithm, and the two methods are proven to be efficient for accelerating the convergence without leading the particle to premature convergence. [ABSTRACT FROM AUTHOR]

Missing information in motion capture data caused by occlusion or detachment of markers is a common problem that is difficult to avoid entirely. The aim of this study was to develop and test an algorithm for reconstruction of corrupted marker trajectories in datasets representing human gait. The reconstruction was facilitated using information of marker inter-correlations obtained from a principal component analysis, combined with a novel weighting procedure. The method was completely data-driven, and did not require any training data. We tested the algorithm on datasets with movement patterns that can be considered both well suited (healthy subject walking on a treadmill) and less suited (transitioning from walking to running and the gait of a subject with cerebral palsy) to reconstruct. Specifically, we created 50 copies of each dataset, and corrupted them with gaps in multiple markers at random temporal and spatial positions. Reconstruction errors, quantified by the average Euclidian distance between predicted and measured marker positions, was ≤ 3 mm for the well suited dataset, even when there were gaps in up to 70% of all time frames. For the less suited datasets, median reconstruction errors were in the range 5–6 mm. However, a few reconstructions had substantially larger errors (up to 29 mm). Our results suggest that the proposed algorithm is a viable alternative both to conventional gap-filling algorithms and state-of-the-art reconstruction algorithms developed for motion capture systems. The strengths of the proposed algorithm are that it can fill gaps anywhere in the dataset, and that the gaps can be considerably longer than when using conventional interpolation techniques. Limitations are that it does not enforce musculoskeletal constraints, and that the reconstruction accuracy declines if applied to datasets with less predictable movement patterns. [ABSTRACT FROM AUTHOR]