Search

The use of solid activators to prepare alkali-activated materials (AAM) holds great potential for on-site applications, as it eliminates the need to transport and store large quantities of concentrated alkaline solutions. This study compared the early-age properties and efflorescence between alkali-activated slag/fly ash (AASF) using solid and liquid sodium silicates as activators. The results revealed that AASF with solid sodium silicates exhibited comparable mechanical strength while possessing reduced initial setting time and flowability. All AASF mixtures were susceptible to efflorescence and carbonation, resulting in varying mineralogical compositions of carbonation products: Vaterite was detected in AASF with solid activators, while aragonite and pirssonite were identified in AASF with liquid activators containing 4 and 6 wt.% Na2O, respectively. The efflorescence of AASF exposed to bottom water was more severe than those exposed to natural conditions, as evidenced by the decalcification of reaction products, migration of alkalis, and formation of crystalline carbonates. [ABSTRACT FROM AUTHOR]

Alkali-activated materials (AAMs) have gained increasing attention as potential candidates for conductive and self-sensing concretes. This study investigated the effect of fly ash microspheres and quartz sands on the piezoelectric properties of carbon fiber-reinforced alkali-activated fly ash/slag (AAFS) mortars. The rheological property, mechanical property, resistivity, and piezoelectric properties of different AAFS mortars were investigated. Our findings demonstrated that the use of fly ash microspheres (FAM) significantly reduced the yield stress and plastic viscosity of the mortars due to the "ball bearings" effect. In addition, the finer particles of FAM led to a dense gel pore structure of AAFS. The use of FAM improved carbon fiber dispersion and formed a stable conductive network. Therefore, AAFS mortars with FAM exhibited superior conductivity and piezoelectricity. The use of quartz sands exhibited adverse effects on the self-sensing properties of AAFS mortars. The incorporation of quartz sands predominantly hindered the conductive network formation of carbon fibers, resulting in a significantly higher resistivity and piezoresistivity with low strain sensitivity. • The use of FAM in carbon fiber reinforced-AAFS results in superior conductivity and piezoresistivity. • FAM improved the rheology of AAFS, facilitating the dispersion of carbon fibers. • The use of quartz sands led to a higher resistivity and poor piezoresistivity. [ABSTRACT FROM AUTHOR]

The development of smart concretes with self-sensing properties has gained increasing attention recently. In this study, the effect of different precursors, including blast furnace slag, fly ash, silica fume, and metakaolin, on the electrical conductivity and piezoresistive properties of alkali-activated materials (AAMs) with and without carbon fiber (CF) was investigated. The experimental results revealed that the electrical and self-sensing properties of AAMs were significantly influenced by the raw materials, both with and without carbon fiber. However, distinct trends were observed. The use of silica fume (25 wt%) was beneficial to the self-sensing property of CF-AAM mortars. Mixtures containing fly ash and pure slag exhibited higher sensitivity but with reduced repeatability of the piezoresistivity. Due to the poor dispersion of carbon fibers, as well as the porous microstructure, mixtures with metakaolin had poorer conductivity and piezoresistivity. AAM mortars had evident piezoresistivity under cyclic loading, but their stability was inferior to that of AAM with carbon fibers. The pore size distribution and gel pore quantity of the binder phase were important factors determining the conductive and piezoresistive properties of CF-AAM mortars. • AAM mortars without carbon fiber presented evident piezoresistivity but with poor stability. • The use of silica fume was beneficial to the self-sensing property of CF-AAM. • Mixtures with metakaolin had poorer conductivity and piezoresistivity. • The pore size distribution and gel pore quantity were important for the conductivity of CF-AAM. [ABSTRACT FROM AUTHOR]