Search

Abstract Different on‐chip antennas in Complementary Metal‐Oxide‐Semiconductor (CMOS) technology for THz detector and source are proposed. Firstly, the size of these antennas is estimated with an equivalent CMOS substrate model. Finally, through electromagnetic simulation, the structure optimised and slotted the on‐chip antenna to realise multi‐band detection, miniaturised detection, and miniaturised source. For the THz detector, multi‐band antennas with a dual‐ring structure and miniaturised antennas with circular and diamond structures are designed. At the frequency of 300, 600, and 800 GHz, the gain of the ring antennas is 5.7, 7.2, and 7.2 dBi, respectively. The gain of the circular and diamond antenna is 5.3 and 5.96 dBi at 300 GHz. For the THz source, rectangular‐slot and T‐slot antennas are designed at the frequency of 300 GHz and the gain of the rectangular‐slot and T‐slot antennas is 2.92 and 3.87 dBi, respectively. Multi‐band antennas and miniaturised antennas effectively save the occupation area and improve the performance of the THz system. The effectiveness of antennas is verified by the measurement of the detector and the source, which indicates that the proposed on‐chip antennas have potential prospects for CMOS THz applications.

Different on‐chip antennas in Complementary Metal‐Oxide‐Semiconductor (CMOS) technology for THz detector and source are proposed. Firstly, the size of these antennas is estimated with an equivalent CMOS substrate model. Finally, through electromagnetic simulation, the structure optimised and slotted the on‐chip antenna to realise multi‐band detection, miniaturised detection, and miniaturised source. For the THz detector, multi‐band antennas with a dual‐ring structure and miniaturised antennas with circular and diamond structures are designed. At the frequency of 300, 600, and 800 GHz, the gain of the ring antennas is 5.7, 7.2, and 7.2 dBi, respectively. The gain of the circular and diamond antenna is 5.3 and 5.96 dBi at 300 GHz. For the THz source, rectangular‐slot and T‐slot antennas are designed at the frequency of 300 GHz and the gain of the rectangular‐slot and T‐slot antennas is 2.92 and 3.87 dBi, respectively. Multi‐band antennas and miniaturised antennas effectively save the occupation area and improve the performance of the THz system. The effectiveness of antennas is verified by the measurement of the detector and the source, which indicates that the proposed on‐chip antennas have potential prospects for CMOS THz applications. [ABSTRACT FROM AUTHOR]

Imperfect Channel State Information at the Transmitter (CSIT) is inevitable in modern wireless communication networks, and results in severe multi-user interference in multi-antenna Broadcast Channel (BC). While the capacity of multi-antenna (Gaussian) BC with perfect CSIT is known and achieved by Dirty Paper Coding (DPC), the capacity and the capacity-achieving strategy of multi-antenna BC with imperfect CSIT remain unknown. Conventional approaches therefore rely on applying communication strategies designed for perfect CSIT to the imperfect CSIT setting. In this work, we break this conventional routine and make two major contributions. First, we show that linearly precoded Rate-Splitting (RS), relying on the split of messages into common and private parts and linear precoding at the transmitter, and successive interference cancellation at the receivers, can achieve larger rate region than DPC in multi-antenna BC with partial CSIT. Second, we propose a novel scheme, denoted as Dirty Paper Coded Rate-Splitting (DPCRS), that relies on RS to split the user messages into common and private parts, and DPC to encode the private parts. We show that the rate region of DPCRS in Multiple-Input Single-Output (MISO) BC with partial CSIT is enlarged beyond that of conventional DPC and that of linearly precoded RS. Gaining benefits from the capability of RS to partially decode the interference and partially treat interference as noise, DPCRS is less sensitive to CSIT inaccuracies, networks loads and user deployments compared with DPC and other existing transmission strategies. [ABSTRACT FROM AUTHOR]

This article is an interesting substrate material for environmental-friendly printable electronics. In this study, screen-printed RFID tags on paper substrate are examined. Their reliability was tested with low temperature, high temperature, slow temperature cycling, high temperature and high humidity and water dipping test. Environmental stresses affect the tag antenna impedance, losses and radiation characteristics due to their impact on the ink film and paper substrate. Low temperature, temperature cycling and high humidity did not have a radical effect on the measured parameters: threshold power, backscattered signal power or read range of the tags. However, the frequency response and the losses of the tags were slightly affected. Exposure to high temperature was found to even improve the tag performance due to the positive effect of high temperature on the ink film. The combined high humidity and high temperature had the most severe effect on the tag performance. The threshold power increased, backscattered power decreased and the read range was shortened. On the whole, the results showed that field use of these tags in high, low and changing temperature conditions and high humidity conditions is possible. Use of these tags in combined high-humidity and high-temperature conditions should be carefully considered. [ABSTRACT FROM PUBLISHER]

The feasibility of electrically conductive paper as a low-cost and eco-friendly alternative to copper is presented for application as an antenna conductor in UHF radio-frequency identification (RFID) systems. The conductivity of the paper is determined to be 50 S/m and the effect of such a low conductivity on the radiation performance of a half-wavelength dipole is investigated through simulation and experimental measurements. The radiation efficiency of a dipole cut from a 0.4 mm thick conductive paper sheet is measured to be 5.0%, which translates to an RFID tag read range of 22% of that obtained using copper. This performance is deemed unacceptable for most antenna applications. However, through simulation a conductivity of 500 S/m is identified as a reasonable target for the developers of conductive paper as the current distribution and terminal properties of the resulting antenna become similar to those observed when using copper. The radiation efficiency is projected at 56 % in this case, resulting in an RFID read range of 73% of that obtained using copper. [ABSTRACT FROM PUBLISHER]

Copyright of European Journal of Applied Business & Management is the property of ISAG - European Business School and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A complete characterization of the inkjet printing process using metallic nanoparticle inks on a paper substrate for microwave frequencies up to 12.5 GHz as well as its application to low-cost, high gain and wideband antenna design are demonstrated in this work. Laser and heat sintering of metallic nanoparticles are compared on paper substrate for the first time which demonstrate immense cost and time benefits of laser sintering. The antennas fabricated using the characterized process include a Vivaldi for the UWB band which exhibits a significantly higher gain of up to 8 dBi as compared to the currently published inkjet printed antennas, and a novel slow-wave log periodic dipole array which employs a new miniaturization technique to show 20% width reduction. [ABSTRACT FROM PUBLISHER]

This paper deals with a low-cost method for the assembly of flexible substrate antennas and UHF RF identification silicon (Si) chips. Such a method exploits a magnetic coupling mechanism, thus not requiring for galvanic contacts between the Si chip and antenna itself. The magnetic coupling is established by a planar transformer, the primary and secondary windings of which are implemented on flexible substrate and Si chip, respectively. As a result, the Si chip can be assembled on the antenna with a mere placing and gluing process. First, the idea has been validated by theory. Electromagnetic simulations of a square heterogeneous transformer (1.0-mm side) show a maximum available power gain (MAG) of -0.4 dB at 868 MHz. In addition, the heterogeneous transformer is also quite tolerant with respect to misalignment between primary and secondary. An offset error of 150 \mu\ m reduces the MAG to -0.5 dB. A sub-optimal matching strategy, exploiting a simple on-chip capacitor, is then developed for antennas with 50-\Omega input impedances. Finally, the idea has been experimentally validated exploiting printed circuit board (PCB) prototypes. A PCB transformer (1.5-mm side) and a transformer rectifier (two-diode Dickson multiplier) have been fabricated and tested. Measurements indicates a MAG of -0.3 dB at 868 MHz for the transformer and the capability of the developed rectifier to supply a 220-\k\Omega load at 1.5 V with a -2-dBm input power. [ABSTRACT FROM AUTHOR]

This paper presents a wireless, self-powered, affinity-based biosensor based on the integration of paper-based microfluidics with our previously reported method for self-assembling radio-frequency (RF) antennas. At the core of the proposed approach is a silver-enhancement technique that grows portions of a RF antenna in regions where target antigens hybridize with target specific affinity probes. The hybridization regions are defined by a network of nitrocellulose based microfluidic channels which implement a self-powered approach to sample the reagent and control its flow and mixing. The integration substrate for the biosensor has been constructed using polyethylene and the patterning of the antenna on the substrate has been achieved using a low-cost ink-jet printing technique. The substrate has been integrated with passive radio-frequency identification (RFID) tags to demonstrate that the resulting sensor-tag can be used for continuous monitoring in a food supply-chain where direct measurement of analytes is typically considered to be impractical. We validate the proof-of-concept operation of the proposed sensor-tag using IgG as a model analyte and using a 915 MHz Ultra-high-frequency (UHF) RFID tagging technology. [ABSTRACT FROM PUBLISHER]

Keywords: antennas; bandwidth allocation; microwave propagation EN antennas bandwidth allocation microwave propagation 415 418 4 06/01/23 20230501 NES 230501 INTRODUCTION A revolutionary enhancement of transmission data rates is required to meet the challenge of an exponential capacity increase for the sixth generation (6G) and beyond mobile communication and sensing systems in the era of 2030 and beyond. They can be clustered into three main categories, namely antennas at the THz band, antennas at the mmWave band, and propagation at mmWave and THz bands. SUMMARY All of the papers selected for this Special Issue provide the first-hand information and the state of the art of advanced antenna technologies and propagation modelling at mmWave, sub-mmWave, and THz bands. [Extracted from the article]

A compact dual-WLAN-band antenna, in the shape of a paper clip, is presented. The antenna can be easily manufactured by bending few times a single copper wire with a length of about 65 mm, and it operates in the 2.4 and 5.2 GHz bands in the WLAN environment. In addition to the simple configuration, the antenna is easily fed by a 50-Ω mini-coaxial cable which allows it to be flexible in a defined location for installation. An experimental prototype of the proposed antenna with the overall dimensions of about 5 mm × 23.5 mm is constructed, tested, and demonstrated. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2572–2574, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23760 [ABSTRACT FROM AUTHOR]

This paper presents the evolution of the publication of microstrip antenna papers in the IEEE Transactions on Antennas and Propagation. Both the number of papers and the topics of the papers are examined. To set the reference point and the general trends, the most relevant figures and statistics of all the papers published in the journal since 1970 are also analyzed. [ABSTRACT FROM AUTHOR]

Applications of Liquid Crystals (LC) beyond displays have gained increasing interest throughout established material and display industries as well as disruptive startup companies. In this paper we describe new materials and device concepts for smart antennas and digital optics applications. [ABSTRACT FROM AUTHOR]

This paper considers sparse device activity detection for cellular machine-type communications with non-orthogonal signatures using the approximate message passing algorithm. This paper compares two network architectures, massive multiple-input-multiple-output (MIMO) and cooperative MIMO, in terms of their effectiveness in overcoming inter-cell interference. In the massive MIMO architecture, each base station (BS) detects only the users from its own cell while treating inter-cell interference as noise. In the cooperative MIMO architecture, each BS detects the users from neighboring cells as well; the detection results are then forwarded in the form of a log-likelihood ratio (LLR) to a central unit where final decisions are made. This paper analytically characterizes the probabilities of false alarm and missed detection for both architectures. The numerical results validate the analytic characterization and show that as the number of antennas increases, a massive MIMO system effectively drives the detection error to zero, while as the cooperation size increases, the cooperative MIMO architecture mainly improves the cell-edge user performance. Moreover, this paper studies the effect of LLR quantization to account for the finite-capacity fronthaul. The numerical simulations of a practical scenario suggest that in specific case cooperating three BSs in a cooperative MIMO system achieves about the same cell-edge detection reliability as a non-cooperative massive MIMO system with four times the number of antennas per BS. [ABSTRACT FROM AUTHOR]

This paper presents experimental verification results for a finite‐sized array of a simple non‐reciprocal metasurface elements. The metasurface elements consists of ferrite loaded metal patches. Experimental results demonstrate nonreciprocity, achieving isolation exceeding 20 dB at 6.4 GHz in a 2×2 array. Additionally, these findings are compared with simulation results for a 4×4 array to validate its practicality in a finite array setting. [ABSTRACT FROM AUTHOR]

The integration of antennas into disposable paper drones using inkjet printing technology is presented. These drones or unmanned aerial vehicles (UAVs) are developed using origami folding structures. Two vertical monopole antennas based on the same design concept are proposed and their performance assessed for two different conditions. The conditions relate to the placement of the other electronic components and circuits on the origami drones as reported in the literature. The first is when the electromechanical components and corresponding metallic layers are located in the wings. In this case, the effect of the possible location of the antenna as well as the deformation of the wings on S11 is discussed. The second is a more general case scenario which includes when the components and motors are placed at the tail and lower part of the body of the drone. The antenna elements are directly printed onto a photo paper substrate using silver nanoparticle conductive ink. Subsequently, the substrate is folded to create a paper drone. Low-cost desktop inkjet printing equipment is used to deposit the metallic tracks of the antenna. The designs target the current frequency bands employed in the control and wireless communication of commercial drones (2.4 GHz and 5 GHz bands). The purpose of this work is to investigate potential antenna scenarios for disposable drones which may one day be fully fabricated using inkjet printing technology. All antenna designs and studies have been simulated using CST Microwave Studio and compared well with experimental results. [ABSTRACT FROM AUTHOR]

In this paper, we study the diversity-multiplexing-gain tradeoff (DMT) of wireless relay networks under the half-duplex constraint. It is often unclear what penalty if any, is imposed by the half-duplex constraint on the DMT of such networks. We study two classes of networks; the first class, called KPP(I) networks, is the class of networks with the relays organized in K parallel paths between the source and the destination. While we assume that there is no direct source-destination path, the K relaying paths can interfere with each other. The second class, termed as layered networks, is comprised of relays organized in layers, where links exist only between adjacent layers. [ABSTRACT FROM PUBLISHER]

Additive manufacturing has emerged as a transformative methodology in numerous engineering domains, with the fabrication of antennas and electromagnetic devices being a promising application area. This study presents a comprehensive review of the application of these technologies for manufacturing electromagnetic devices, offering a categorized analysis based on different types of additive manufacturing techniques. Each category is examined, and its characteristics are briefly described, highlighting not only the most innovative and significant devices fabricated using specific technologies, but also identifying their limitations and strengths. Through a dual analysis, this paper provides a deep understanding of the potential of and challenges associated with using different additive manufacturing technologies in the design and crafting of electromagnetic components. Moreover, this review offers recommendations for future studies, suggesting how the unique features of this new manufacturing paradigm could be further leveraged for breakthroughs in the electromagnetic field. [ABSTRACT FROM AUTHOR]

This paper studies the effectiveness of relaying for interference mitigation in an interference-limited communication scenario. We are motivated by the observation that in a cellular network, a relay node placed at the cell edge observes a combination of intended signal and inter-cell interference that is correlated with the received signal at a nearby destination, so a relaying link can effectively allow the antennas at the relay and at the destination to be pooled together for both signal enhancement and interference mitigation. We model this scenario by a multiple-input multiple-output (MIMO) Gaussian relay channel with a digital relay-to-destination link of finite capacity, and with correlated noise across the relay and destination antennas. Assuming a compress-and-forward strategy with Gaussian input distribution and quantization noise, we propose a coordinate ascent algorithm for obtaining a stationary point of the non-convex joint optimization of the transmit and quantization covariance matrices. For fixed input distribution, the globally optimum quantization noise covariance matrix can be found in closed-form using a transformation for the relay’s observation that simultaneously diagonalizes two conditional covariance matrices by congruence. For fixed quantization, the globally optimum transmit covariance matrix can be found via convex optimization. This paper further shows that such an optimized achievable rate is within a constant additive gap of the MIMO relay channel capacity. The optimal structure of the quantization noise covariance enables a characterization of the slope of the achievable rate as a function of the relaying link capacity. Moreover, this paper shows that the improvement in spatial degrees of freedom by MIMO relaying in the presence of noise correlation is related to the aforementioned slope via a connection to the deterministic relay channel. [ABSTRACT FROM AUTHOR]

Space Systems have been historically characterised by high performance, high reliability and high cost. Every new generation of space systems tends to improve performance, keep as much as possible reliability, speeding the lead time and lower the cost. Aggressive approach is nowadays followed by some of the players of the new space ecosystem where, for instance, reliability can be relaxed thanks for the in-orbit redundancy or robustness to failures by having a constellation with a high number of satellites. This push towards the technology and system limit requires to investigate new methods for the manufacturing of RF/Microwave parts. RF devices such as those based on waveguide structures, benefit from an additive manufacturing approach in terms of radio frequency (RF) performance and compactness. However each manufacturing approach comes with specific features and limitations which need to be well understood and, in some cases, even taking advantage of them. This paper provides a short review of some of the RF/Microwave parts already manufactured using this technology. The paper will focus mainly on metal 3D printing parts since this technology is, at the moment, well accepted by the space community. [ABSTRACT FROM AUTHOR]

Respiratory problems are common amongst older people. The rapid increase in the ageing population has led to a need for developing technologies that can monitor such conditions unobtrusively. This paper presents a novel study that investigates Wi-Fi and ultra-wideband (UWB) antenna sensors to simultaneously monitor two different breathing parameters: respiratory rate, and exhaled breath. Experiments were carried out with two subjects undergoing three breathing cases in breaths per minute (BPM): (1) slow breathing (12 BPM), (2) moderate breathing (20 BPM), and (3) fast breathing (28 BPM). Respiratory rates were captured by Wi-Fi sensors, and the data were processed to extract the respiration rates and compared with a metronome that controlled the subjects' breathing. On the other hand, exhaled breath data were captured by a UWB antenna using a vector network analyser (VNA). Corresponding reflection coefficient data (S11) were obtained from the subjects at the time of exhalation and compared with S11 in free space. The exhaled breath data from the UWB antenna were compared with relative humidity, which was measured with a digital psychrometer during the breathing exercises to determine whether a correlation existed between the exhaled breath's water vapour content and recorded S11 data. Finally, captured respiratory rate and exhaled breath data from the antenna sensors were compared to determine whether a correlation existed between the two parameters. The results showed that the antenna sensors were capable of capturing both parameters simultaneously. However, it was found that the two parameters were uncorrelated and independent of one another. [ABSTRACT FROM AUTHOR]

Ever‐increasing bandwidth requirements from various industries drive the need for the ever‐increasing bandwidth of antennas used for testing. Broadband Double‐Ridged Guide Horn (DRGH) antennas are used extensively in antenna measurement and ElectroMagnetic Compatibility/Interference (EMC/I) testing. The current state‐of‐the‐art broadband DRGH antennas reported in the literature for use in measurement applications cover bandwidth ratios as large as 36:1 (0.5–18 GHz). This paper presents the design and realisation of a DRGH antenna with a 100:1 bandwidth ratio (0.5–50 GHz). To achieve such a wide bandwidth, the ridge gap, width and feed were optimised, and a novel coaxial‐to‐ridge waveguide launcher section based on a typical Vivaldi antenna was developed. Backward radiation was reduced using an absorber‐filled cavity. A prototype DRGH antenna was manufactured using additive manufacturing, also referred to as 3D printing. Simulated and measured results obtained in an anechoic chamber are presented. [ABSTRACT FROM AUTHOR]

In this paper, we revisit the fundamental problem of computing MIMO capacity under per-antenna power constraint (PAPC). Unlike the sum power constraint counterpart which likely admits water-filling-like solutions, MIMO capacity with PAPC has been largely studied under the framework of generic convex optimization. The two main shortcomings of these approaches are 1) their complexity scales quickly with the problem size, which is not appealing for large-scale antenna systems and/or 2) their convergence properties are sensitive to the problem data. As a starting point, we first consider a single user MIMO scenario and propose two provably-convergent iterative algorithms to find its capacity, the first method based on fixed-point iteration and the other based on alternating optimization and minimax duality. In particular, the two proposed methods can leverage the water-filling algorithm in each iteration and converge faster, compared with current methods. We then extend the proposed solutions to multiuser MIMO systems with dirty paper coding-based transmission strategies. In this regard, capacity regions of Gaussian broadcast channels with PAPC are also computed using closed-form expressions. Numerical results are provided to demonstrate the outperformance of the proposed solutions over existing approaches. [ABSTRACT FROM AUTHOR]

In this paper, a quad-mode endfire planar phased antenna array with wide scan angle and 1.2 mm clearance is proposed for 5G mobile terminals. The proposed antenna can obtain over 8 GHz of impedance bandwidth. In this paper, it is suggested to efficiently combine a multimode array element with different radiation patterns for each mode into a phased antenna array. In the array, similar and wide embedded radiation patterns are obtained for the all four modes. Furthermore, a coaxial to differential stripline transition is designed in this paper. The differential feeding structure is very compact and utilizes only MMPX connector and vias. The total scan pattern and coverage efficiency of the measured and simulated phased array antenna are calculated in the range from 25 to 33 GHz, and good agreement between measured and simulated results is observed. The mean coverage efficiency along the frequency range is very similar, but minor difference in variance of coverage efficiency is observed in the measurements. The coverage efficiency of around 50% for the threshold gain of 5 dBi is achieved in the chosen frequency range. [ABSTRACT FROM AUTHOR]

RFID-based pose perception can enable industrial automation applications such as industrial robot grasping. In this paper, a RFID pose estimation method based on classification algorithm and phase-position transformation model for moving objects is proposed, which converts the traditional pose estimation problem into a machine learning classification problem by dividing the direction angle value domain of the object into several classes. The phase information of multiple RFID tags attached to the object is transformed into position information using an unwrapped phase-position model, on which the input features of the classifier is constructed. A classifier based on the LightGBM framework is constructed and trained to realize the mapping between RFID phase information and the object’s pose. Extensive experiments demonstrate that the proposed method in this paper can accurately estimate the pose of moving objects in real time and successfully complete the robot grasping task for objects on the conveyor belt. [ABSTRACT FROM AUTHOR]

In this paper, the B-scan technique is applied to a reverberation chamber (RC) for the first time to characterize the time-domain behavior of the chamber. Based on B-scan measurement results, three things are studied in this paper. 1) The statistical behavior of the fields in the time domain is investigated, and it is found that the received power of the impulse response follows chi-square distribution with one degree of freedom. 2) The stirrer efficiency is quantified based on the equivalent total scattering cross section (TSCS) of stirrers, and this definition is not sensitive to the antenna position and load in the RC. It is shown that the stirrer efficiency defined in this paper provides, for the first time, a quantitative way to evaluate the stirrer design and the chamber performance. 3) A time-gating technique is proposed which provides an alternative method to eliminate the early time response and obtain the chamber transfer function of the RC accurately. This could be potentially used to increase the stirrer efficiency without changing the stirrers physically. It is demonstrated that the B-scan technique is a very useful approach for the study and evaluation of an RC. [ABSTRACT FROM PUBLISHER]

The growing interest in unmanned aerial vehicles (UAVs) from both the scientific and industrial sectors has attracted a wave of new researchers and substantial investments in this expansive field. However, due to the wide range of topics and subdomains within UAV research, newcomers may find themselves overwhelmed by the numerous options available. It is therefore crucial for those involved in UAV research to recognize its interdisciplinary nature and its connections with other disciplines. This paper presents a comprehensive overview of the UAV field, highlighting recent trends and advancements. Drawing on recent literature reviews and surveys, the review begins by classifying UAVs based on their flight characteristics. It then provides an overview of current research trends in UAVs, utilizing data from the Scopus database to quantify the number of scientific documents associated with each research direction and their interconnections. This paper also explores potential areas for further development in UAVs, including communication, artificial intelligence, remote sensing, miniaturization, swarming and cooperative control, and transformability. Additionally, it discusses the development of aircraft control, commonly used control techniques, and appropriate control algorithms in UAV research. Furthermore, this paper addresses the general hardware and software architecture of UAVs, their applications, and the key issues associated with them. It also provides an overview of current open source software and hardware projects in the UAV field. By presenting a comprehensive view of the UAV field, this paper aims to enhance our understanding of this rapidly evolving and highly interdisciplinary area of research. [ABSTRACT FROM AUTHOR]

In this paper, an antenna gain measurement method for millimeter-wave antennas in an on-wafer probe station environment is studied. The one-antenna gain measurement has been known since the 1940s. However, the authors believe that this extension of their previous work is the first time when the method is systematically studied in the on-wafer probe station environment. The main difference between the original one-antenna gain measurement and our method is that in the probe station environment, the space is limited and, therefore, the reflecting plate dimensions are limited. We have studied the effect of the reflector size limitation through computations using physical optics and through measurements with a standard gain horn (SGH) and with a printed microstrip patch antenna. The necessary size of the reflecting plate naturally depends on the beamwidth of the antenna under test and on the distance. Time gating has been applied in the retrieving calculation to filter out multiple reflections. According to this paper, the one-antenna gain measurement in the $W$ -band results in the correct antenna gain with very high accuracy for the highly directional SGH. For the patch antenna, the gain measured in the on-wafer probe station environment agrees well with the simulated one. [ABSTRACT FROM AUTHOR]

Intelligent fault detection is an important application of artificial intelligence and has been widely used in many mechanical systems. The shipborne antenna that is a typical and an important mechanical system plays an irreplaceable role in ships. Considering the tough working environment and heavy background noise, fault detection is difficult for the shipborne antenna. Therefore, the paper presents an intelligent fault detection method via multiscale inner product with locally connected feature extraction for shipborne antenna fault detection. Inspired by inner product principle, this paper takes advantage of inner product to capture fault information in the vibration signals and detect the faults in rolling bearing of the shipborne antenna. Meanwhile, multiscale analysis is employed in two layers of the network to improve the feature extraction ability. The local features under different scales are collected and used for fault classification. Finally, the proposed method is verified by three datasets and comparison methods are also developed to show its superiority. Results show that the proposed method can learn sensitive features directly from raw vibration signals and detect the faults in rolling bearing of shipborne antenna effectively. [ABSTRACT FROM AUTHOR]

This paper compares three modern and two classical multiobjective optimizers (MOOs) as applied to real-world problems in electromagnetics. The behavior of sophisticated optimizers on simple test functions has been studied exhaustively. In contrast, the algorithms here are tested on practical applications, where the function evaluations are computationally expensive, making the convergence rate a crucial factor. The examples considered include the optimization of a narrowband slot antenna, a mushroom-type electromagnetic bandgap structure, and an ultrawideband Vivaldi antenna. Another popular topic in the literature is in comparing classical MOOs on electromagnetics problems. The modern optimizers chosen in this paper are state of the art and each has a distinct design philosophy. This paper introduces two unique MOOs to the electromagnetics community: BORG, an auto-adaptive genetic algorithm and the Multi-Objective Covariance Matrix Adaptation Evolutionary Strategy (MO-CMA-ES), an extension of the popular single-objective CMA-ES. These algorithms are compared to the Multi-objective Evolutionary Algorithm based on Decomposition (MOEA/D), a Chebysheff scalarization algorithm, and two classical MOOs. This paper will study the behavior of these algorithms on problems in electromagnetics with a limited number of function evaluations using five distinct metrics and will provide useful guidelines and recommended optimizer settings. [ABSTRACT FROM AUTHOR]

The multi-user Holographic Multiple-Input and Multiple-Output Surface (MU-HMIMOS) paradigm, which is capable of realizing large continuous apertures with minimal power consumption, has been recently considered as an energy-efficient solution for future wireless networks, offering increased flexibility in impacting electromagnetic (EM) wave propagation according to the desired communication, localization, and sensing objectives. The tractable channel modeling in MU-HMIMOS wireless systems is one of the most critical research challenges, mainly due to the coupling effect induced by the excessively large number of closely spaced patch antennas. In this paper, we focus on this challenge for the downlink of multi-user MIMO communications and extend an EM-compliant channel model to multi-user case, which is expressed in the wavenumber domain using the Fourier plane wave approximation. Based on the presented channel model, we investigate the spectral efficiency of maximum-ratio transmission and Zero-Forcing (ZF) precoding schemes. We also introduce a novel hardware efficient ZF precoder, leveraging Neumann series (NS) expansion to replace the required matrix inversion operation, which is very hard to be computed in the conventional way due to the extremely large number of patch antennas in the envisioned MU-HMIMOS communication systems. In comparison with the conventional independent and identical Rayleigh fading channels that ignore antenna coupling effects, the proposed EM-compliant channel model captures the mutual couplings induced by the very small antenna spacing. Our extensive performance evaluation results demonstrate that our theoretical performance expressions approximate sufficiently well the simulated achievable spectral efficiency with the considered linear precoding schemes, even for the highly correlated cases, thus verifying the effectiveness and robustness of the presented analytical framework. In addition, it is verified that the proposed NS-based ZF precoder achieves similar performance to conventional ZF, while requiring lower hardware complexity, thus, providing a hardware efficient solution for practical design of MU-HMIMOS communications systems. [ABSTRACT FROM AUTHOR]