Search

Accurate Origin-Destination (OD) prediction is significant for effective traffic monitor, which can support operation decision in traffic planning and management field. The enclosed expressway network system like toll gates system in China can collect mounts of trip records which can be gathered for OD prediction. The paper develops a novel neural network, which is named Expressway OD Prediction Neural Network (EODPNN) for toll data-based prediction. The network consists of the following three modules: The Feature Extension Module, the Memory Module, and the Prediction Module. In the process, the attributes data which can reflect the city attribute such as GDP, population, and the number of vehicles are considered to embeded into the notwork to increase the accuracy of the model. For the applicability improvment of the model, we categorize the cities in multiple classes based on their economy and population scales in this paper, which can provide a higher accurate prediction of OD by EODPNN. The results shows that, comparing to the traditional model like ARIMA and SVM, or typical neural networks like Bidirectional Long Short-term Memory, the EODPNN delivers a better prediction performance. The method proposed in this paper has been fully verified and has a potential to transplant to the other OD data-based management systems for a more accurate and flexible prediction. [ABSTRACT FROM AUTHOR]

Aiming to solve the safety problems of high-speed railway operation and management, one new method is urgently needed to construct on the basis of the rough set theory and the uncertainty measurement theory. The method should carefully consider every factor of high-speed railway operation that realizes the measurement indexes of its safety operation. After analyzing the factors that influence high-speed railway safety operation in detail, a rough measurement model is finally constructed to describe the operation process. Based on the above considerations, this paper redistricts the safety influence factors of high-speed railway operation as 16 measurement indexes which include staff index, vehicle index, equipment index and environment. And the paper also provides another reasonable and effective theoretical method to solve the safety problems of multiple attribute measurement in high-speed railway operation. As while as analyzing the operation data of 10 pivotal railway lines in China, this paper respectively uses the rough set-based measurement model and value function model (one model for calculating the safety value) for calculating the operation safety value. The calculation result shows that the curve of safety value with the proposed method has smaller error and greater stability than the value function method’s, which verifies the feasibility and effectiveness. [ABSTRACT FROM AUTHOR]

China’s fast economic growth contributes to the rapid development of its urbanization process, and also renders a series of industrial accidents, which often cause loss of life, damage to property and environment, thus requiring the associated risk analysis and safety control measures to be implemented in advance. However, incompleteness of historical failure data before the occurrence of accidents makes it difficult to use traditional risk analysis approaches such as probabilistic risk analysis in many cases. This paper aims to develop a new methodology capable of assessing regional industrial safety (RIS) in an uncertain environment. A hierarchical structure for modelling the risks influencing RIS is first constructed. The hybrid of evidential reasoning (ER) and Analytical Hierarchy Process (AHP) is then used to assess the risks in a complementary way, in which AHP is hired to evaluate the weight of each risk factor and ER is employed to synthesise the safety evaluations of the investigated region(s) against the risk factors from the bottom to the top level in the hierarchy. The successful application of the hybrid approach in a real case analysis of RIS in several major districts of Beijing (capital of China) demonstrates its feasibility as well as provides risk analysts and safety engineers with useful insights on effective solutions to comprehensive risk assessment of RIS in metropolitan cities. The contribution of this paper is made by the findings on the comparison of risk levels of RIS at different regions against various risk factors so that best practices from the good performer(s) can be used to improve the safety of the others. [ABSTRACT FROM AUTHOR]

How to effectively solve traffic congestion and transportation pollution in urban development is a main research emphasis for transportation management agencies. A carbon emissions tax can affect travelers’ generalized costs and will lead to changes in passenger demand, mode choice and traffic flow equilibrium in road networks, which are of significance in green travel and low-carbon transportation management. This paper first established a mesoscopic model to calculate the carbon emissions tax and determined the value of this charge in China, which was based on road traffic flow, vehicle speed, and carbon emissions. Referring to existing research results to calibrate the value of time, this paper modified the traveler’s generalized cost function, including the carbon emissions tax, fuel surcharge and travel time cost, which can be used in the travel impedance model with the consideration of the carbon emissions tax. Then, a method for analyzing urban road network traffic flow distribution was put forward, and a joint traffic distribution model was established, which considered the relationship between private cars and taxis. Finally, this paper took the city of Panjin as an example to analyze the road traffic carbon emissions tax’s impact. The results illustrated that the carbon emissions tax has a positive effect on road network flow equilibrium and carbon emission reduction. This paper will have good reference value and practical significance for the calculation and implementation of urban traffic carbon emissions taxes in China. [ABSTRACT FROM AUTHOR]

This paper aims to optimize a desirable fare structure for the public transit service along a bus-subway corridor with the consideration of those factors related to equity in trip, including travel distance and comfort level. The travel distance factor is represented by the distance-based fare strategy, which is an existing differential strategy. The comfort level one is considered in the area-based fare strategy which is a new differential strategy defined in this paper. Both factors are referred to by the combined fare strategy which is composed of distance-based and area-based fare strategies. The flat fare strategy is applied to determine a reference level of social welfare and obtain the general passenger flow along transit lines, which is used to divide areas or zones along the corridor. This problem is formulated as a bi-level program, of which the upper level maximizes the social welfare and the lower level capturing traveler choice behavior is a variable-demand stochastic user equilibrium assignment model. A genetic algorithm is applied to solve the bi-level program while the method of successive averages is adopted to solve the lower-level model. A series of numerical experiments are carried out to illustrate the performance of the models and solution methods. Numerical results indicate that all three differential fare strategies play a better role in enhancing the social welfare than the flat fare strategy and that the fare structure under the combined fare strategy generates the highest social welfare and the largest resulting passenger demand, which implies that the more equity factors a differential fare strategy involves the more desirable fare structure the strategy has. [ABSTRACT FROM AUTHOR]

China’s transport sector is facing enormous challenges from soaring energy consumption and greenhouse gas (GHG) emissions. Transport electrification has been viewed as a major solution to transportation decarbonization, and electric vehicles (EVs) have attracted considerable attention from policymakers. This paper analyzes the effects of the introduction of EVs in China. A system dynamics model is developed and applied to assess the energy-saving and emission-reducing impacts of the projected penetration of EVs until the year 2030. Five types of scenarios of various EV penetration rates, electricity generation mixes, and the speed of technological improvement are discussed. Results confirm that reductions in transport GHG emissions and gasoline and diesel consumption by 3.0%–16.2%, 4.4%–16.1%, and 15.8%–34.3%, respectively, will be achieved by 2030 under China’s projected EV penetration scenarios. Results also confirm that if EV penetration is accompanied by decarbonized electricity generation, that is, the use of 55% coal by 2030, then total transport GHG emissions will be further reduced by 0.8%–4.4%. Moreover, further reductions of GHG emissions of up to 5.6% could be achieved through technological improvement. The promotion of EVs could substantially affect the reduction of transport GHG emissions in China, despite the uncertainty of the influence intensity, which is dependent on the penetration rate of EVs, the decarbonization of the power sector, and the technological improvement efficiency of EVs and internal combustion engine vehicles. [ABSTRACT FROM AUTHOR]

China is facing severe pressure on its water resources and water environments. Calculating the industrial water efficiency of each province is an important index for the central government to evaluate local governments. In the traditional water resources evaluation index, the industrial water use efficiency and pollutant discharge are evaluated separately. In this paper, we collected industrial input data, output data and pollutant discharge data with a four-stage data envelopment analysis to calculate China's industrial water use efficiency with and without considering pollutant discharge, and then analyzed the factors influencing the industrial water use efficiency. The results show that the eastern coastal provinces of China have the highest water use efficiency and are less affected by pollutant discharge than other provinces. The industrial water use efficiency of the central and western provinces is lower than that of the other provinces, and the industrial water use efficiency in the central provinces is greatly affected by pollutant discharge. Factor endowment, economic development level, scientific and technological progress, industrial structure, proportion of foreign investment, water consumption per 10000 yuan of value-added by industry, industrial sewage treatment capacity and educational investment have a significant influence on the industrial water use efficiency of China. We suggest that the government strengthen the construction of sewage plants and other related infrastructure in central provinces when conducting the industrial transfer of heavy polluting enterprises. [ABSTRACT FROM AUTHOR]

This paper presents an evaluation of the effectiveness of two types of deceleration markings on freeways in China: fishbone-shaped (FS) markings and edge-rate (ER) markings. An actual 4-lane, 6-km long freeway in Province Hebei was created in a driving simulator and used for the experiments. Three scenarios of deceleration markings were adopted: one without markings, one with FS markings, and the third with ER markings. For each scenario, three traffic flow levels were adopted (low, medium, and heavy). The appropriate dimensions of deceleration markings were first established using relevant design guidelines and then used to develop the simulation scenarios using Multigen Creator software. Sixty drivers carried out the simulation experiments with eye tracker equipment. The adequacy of deceleration markings was analyzed with respect to speed, perceived distance, pupil diameter, and geometric parameters. The results showed that both types of deceleration markings made a certain effect on vehicle speed, drivers’visual behavior, and mental characteristics. However, the effect of the FS markings was more pronounced than that of the ER marking. Specifically, the FS markings showed a speed reduction of 12.3 km/h to 15.2 km/h and a perceived distance of 70 m to 90 m, compared with 6.7 km/h to 9.9 km/h and 40 m to 60 m, respectively, for the ER markings. Application comments of the results are provided in the conclusion. [ABSTRACT FROM AUTHOR]

This paper studies the heterogeneous effects of exchange rate and stock market on carbon emission allowance price in four emissions trading scheme pilots in China. We employ a panel quantile regression model, which can describe both individual and distributional heterogeneity. The empirical results illustrate that the effects of explanatory variables on carbon emission allowance price is heterogeneous along the whole quantiles. Specifically, exchange rate has a negative effect on carbon emission allowance price at lower quantiles, while becomes a positive effect at higher quantiles. In addition, a negative effect exists between domestic stock market and carbon emission allowance price, and the intensity decreasing along with the increase of quantile. By contrast, an increasing positive effect is discovered between European stock market and domestic carbon emission allowance prices. Finally, heterogeneous effects on carbon emission allowance price can also be proved in European Union Emission Trading Scheme (EU-ETS). [ABSTRACT FROM AUTHOR]

This paper combines a Granger causality test and a VAR model to investigate the relationships among oil price shocks, global economic policy uncertainty (GEPU), and China’s industrial economic growth. Based on monthly data from 2000 to 2017, we reveal that GEPU and world oil prices jointly Granger cause China's industrial economic growth; world oil prices have a positive effect on China's industrial economic growth, while GEPU has a negative effect. Further analyses investigate the asymmetry effect of oil prices and find that the negative component shows a more significant impact on China's industrial economic growth. The results are robust to different oil price and EPU proxies. [ABSTRACT FROM AUTHOR]

A reasonable micro-pits texture has been initially proved that it can improve friction characteristics between wood and cemented carbide surface and reduce surface friction coefficient. In order to study the cutting performance of the micro-texture when it is applied to the cutting tool for cutting wood more effectively, this paper selected micro-pit texture for studying influence of surface micro-texture cutting tool on wood cutting performance and cutting temperature, finding that when micro-pit cemented carbide cutting tool is adopted for turning the northeast China ash (Fraxinus spp.), it can reduce cutting force of turning and surface friction coefficient between rake face and cuttings. Moreover, for type A and type B cutting tools, when the texture parameters are that the diameter of the micro-pit is 80μm, the depth of the micro pit is: 10μm, area occupancy is 20% and the diameter of the micro-pit is 120μm, the depth of the micro-pit is 10μm and the area occupancy is 20%, the effect generated is the best. When a texture cutting tool is used for cutting, the decrease of the highest temperature in the cutting area is not very great, but the average temperature in the cutting area changes a lot, which is mainly caused by that micro-texture is processed at a position of the rake face close to the main cutting edge and that the highest temperature of cutting is mainly generated on the contact point between tool tip and wood. A reasonable micro-texture parameter can form a layer of liquid lubricating film on the up and down contact surfaces such that the direct contact between cemented carbide and northeast China ash is changed into indirect contact between lubricating films formed by the liquid so as to reduce the surface friction coefficient. [ABSTRACT FROM AUTHOR]

Following the emergence of H7N9 influenza in March 2013, local animal and public health authorities in China have been closing live bird markets as a measure to try to control the H7N9 influenza epidemic. The role of live bird market (LBM) closure on the spread of N7N9 influenza following the closure of LBMs during March to May 2013 (the first wave) and October 2013 to March 2014 (the second wave) is described in this paper. Different provinces implemented closure actions at different times, and intensive media reports on H7N9 in different provinces started at different times. Local broiler prices dropped dramatically in places with outbreaks and more live chickens were transported to other LBMs in neighboring areas without human cases from infected areas when live bird markets were being closed. There were six clusters of human infection from March to May 2013 and October 2013 to March 2014 and there may have been intensive poultry transportation among cluster areas. These findings provide evidence that the closure of LBMs in early waves of H7N9 influenza had resulted in expansion of H7N9 infection to uninfected areas. This suggests that provincial authorities in inland provinces should be alert to the risks of sudden changes in movement patterns for live birds after LBM closure or increased publicity about LBM closure. [ABSTRACT FROM AUTHOR]

In recent decades, various kinds of remote sensing-based drought indexes have been proposed and widely used in the field of drought monitoring. However, the drought-related software and platform development lag behind the theoretical research. The current drought monitoring systems focus mainly on information management and publishing, and cannot implement professional drought monitoring or parameter inversion modelling, especially the models based on multi-dimensional feature space. In view of the above problems, this paper aims at fixing this gap with a component-based system named RSDMS to facilitate the application of drought monitoring by remote sensing. The system is designed and developed based on Component Object Model (COM) to ensure the flexibility and extendibility of modules. RSDMS realizes general image-related functions such as data management, image display, spatial reference management, image processing and analysis, and further provides drought monitoring and evaluation functions based on internal and external models. Finally, China’s Ningxia region is selected as the study area to validate the performance of RSDMS. The experimental results show that RSDMS provide an efficient and scalable support to agricultural drought monitoring. [ABSTRACT FROM AUTHOR]

Aimed at the complicated problems of attraction characteristics regarding passenger flow in urban rail transit network, the concept of the gravity field of passenger flow is proposed in this paper. We establish the computation methods of field strength and potential energy to reveal the potential attraction relationship among stations from the perspective of the collection and distribution of passenger flow and the topology of network. As for the computation methods of field strength, an optimum path concept is proposed to define betweenness centrality parameter. Regarding the computation of potential energy, Compound Simpson’s Rule Formula is applied to get a solution to the function. Taking No. 10 Beijing Subway as a practical example, an analysis of simulation and verification is conducted, and the results shows in the following ways. Firstly, the bigger field strength value between two stations is, the stronger passenger flow attraction is, and the greater probability of the formation of the largest passenger flow of section is. Secondly, there is the greatest passenger flow volume and circulation capacity between two zones of high potential energy. [ABSTRACT FROM AUTHOR]

Today, China is facing a very serious issue of Air Pollution due to its dreadful impact on the human health as well as the environment. The urban cities in China are the most affected due to their rapid industrial and economic growth. Therefore, it is of extreme importance to come up with new, better and more reliable forecasting models to accurately predict the air quality. This paper selected Beijing, Tianjin and Shijiazhuang as three cities from the Jingjinji Region for the study to come up with a new model of collaborative forecasting using Support Vector Regression (SVR) for Urban Air Quality Index (AQI) prediction in China. The present study is aimed to improve the forecasting results by minimizing the prediction error of present machine learning algorithms by taking into account multiple city multi-dimensional air quality information and weather conditions as input. The results show that there is a decrease in MAPE in case of multiple city multi-dimensional regression when there is a strong interaction and correlation of the air quality characteristic attributes with AQI. Also, the geographical location is found to play a significant role in Beijing, Tianjin and Shijiazhuang AQI prediction. [ABSTRACT FROM AUTHOR]

The effectiveness of rapid rail transit system is analyzed using tools of complex network for the first time. We evaluated the effectiveness of the system in Beijing quantitatively from different perspectives, including descriptive statistics analysis, bridging property, centrality property, ability of connecting different part of the system and ability of disease spreading. The results showed that the public transport of Beijing does benefit from the rapid rail transit lines, and the benefit of different regions from RRTS is gradually decreased from the north to the south. The paper concluded with some policy suggestions regarding how to promote the system. This study offered significant insight that can help understand the public transportation better. The methodology can be easily applied to analyze other urban public systems, such as electricity grid, water system, to develop more livable cities. [ABSTRACT FROM AUTHOR]

As a sustainable transportation mode, high-speed railway (HSR) has become an efficient way to meet the huge travel demand. However, due to the high acquisition and maintenance cost, it is impossible to build enough infrastructure and purchase enough train-sets. Great efforts are required to improve the transport capability of HSR. The utilization efficiency of train-sets (carrying tools of HSR) is one of the most important factors of the transport capacity of HSR. In order to enhance the utilization efficiency of the train-sets, this paper proposed a train-set circulation optimization model to minimize the total connection time. An innovative two-stage approach which contains segments generation and segments combination was designed to solve this model. In order to verify the feasibility of the proposed approach, an experiment was carried out in the Beijing-Tianjin passenger dedicated line, to fulfill a 174 trips train diagram. The model results showed that compared with the traditional Ant Colony Algorithm (ACA), the utilization efficiency of train-sets can be increased from 43.4% (ACA) to 46.9% (Two-Stage), and 1 train-set can be saved up to fulfill the same transportation tasks. The approach proposed in the study is faster and more stable than the traditional ones, by using which, the HSR staff can draw up the train-sets circulation plan more quickly and the utilization efficiency of the HSR system is also improved. [ABSTRACT FROM AUTHOR]

Estimating gross primary production (GPP) and net primary production (NPP) are significant important in studying carbon cycles. Using models driven by multi-source and multi-scale data is a promising approach to estimate GPP and NPP at regional and global scales. With a focus on data that are openly accessible, this paper presents a GPP and NPP model driven by remotely sensed data and meteorological data with spatial resolutions varying from 30 m to 0.25 degree and temporal resolutions ranging from 3 hours to 1 month, by integrating remote sensing techniques and eco-physiological process theories. Our model is also designed as part of the Multi-source data Synergized Quantitative (MuSyQ) Remote Sensing Production System. In the presented MuSyQ-NPP algorithm, daily GPP for a 10-day period was calculated as a product of incident photosynthetically active radiation (PAR) and its fraction absorbed by vegetation (FPAR) using a light use efficiency (LUE) model. The autotrophic respiration (Ra) was determined using eco-physiological process theories and the daily NPP was obtained as the balance between GPP and Ra. To test its feasibility at regional scales, our model was performed in an arid and semi-arid region of Heihe River Basin, China to generate daily GPP and NPP during the growing season of 2012. The results indicated that both GPP and NPP exhibit clear spatial and temporal patterns in their distribution over Heihe River Basin during the growing season due to the temperature, water and solar influx conditions. After validated against ground-based measurements, MODIS GPP product (MOD17A2H) and results reported in recent literature, we found the MuSyQ-NPP algorithm could yield an RMSE of 2.973 gC m-2 d-1 and an R of 0.842 when compared with ground-based GPP while an RMSE of 8.010 gC m-2 d-1 and an R of 0.682 can be achieved for MODIS GPP, the estimated NPP values were also well within the range of previous literature, which proved the reliability of our modelling results. This research suggested that the utilization of multi-source data with various scales would help to the establishment of an appropriate model for calculating GPP and NPP at regional scales with relatively high spatial and temporal resolution. [ABSTRACT FROM AUTHOR]

Many studies indicated that industrialization and urbanization caused serious soil heavy metal pollution from industrialized age. However, fewer previous studies have conducted a combined analysis of the landscape pattern, urbanization, industrialization, and heavy metal pollution. This paper was aimed at exploring the relationships of heavy metals in the soil (Pb, Cu, Ni, As, Cd, Cr, Hg, and Zn) with landscape pattern, industrialisation, urbanisation in Taiyuan city using multivariate analysis. The multivariate analysis included correlation analysis, analysis of variance (ANOVA), independent-sample T test, and principal component analysis (PCA). Geographic information system (GIS) was also applied to determine the spatial distribution of the heavy metals. The spatial distribution maps showed that the heavy metal pollution of the soil was more serious in the centre of the study area. The results of the multivariate analysis indicated that the correlations among heavy metals were significant, and industrialisation could significantly affect the concentrations of some heavy metals. Landscape diversity showed a significant negative correlation with the heavy metal concentrations. The PCA showed that a two-factor model for heavy metal pollution, industrialisation, and the landscape pattern could effectively demonstrate the relationships between these variables. The model explained 86.71% of the total variance of the data. Moreover, the first factor was mainly loaded with the comprehensive pollution index (P), and the second factor was primarily loaded with landscape diversity and dominance (H and D). An ordination of 80 samples could show the pollution pattern of all the samples. The results revealed that local industrialisation caused heavy metal pollution of the soil, but such pollution could respond negatively to the landscape pattern. The results of the study could provide a basis for agricultural, suburban, and urban planning. [ABSTRACT FROM AUTHOR]

The conversion of farmland to forestland not only changes the ecological environment but also enriches the soil with organic matter and affects the global carbon cycle. This paper reviews the influence of land use changes on the soil organic carbon sink to determine whether the Chinese “Grain-for-Green” (conversion of farmland to forestland) project increased the rate of SOC content during its implementation between 1999 and 2010 in the hilly and gully areas of the Loess Plateau in north-central China. The carbon sink was quantified, and the effects of the main species were assessed. The carbon sink increased from 2.26×106 kg in 1999 to 8.32×106 kg in 2010 with the sustainable growth of the converted areas. The black locust (Robinia pseudoacacia L.) and alfalfa (Medicago sativa L.) soil increased SOC content in the top soil (0–100 cm) in the initial 7-yr period, while the sequestration occurred later (>7 yr) in the 100–120 cm layer after the “Grain-for-Green” project was implemented. The carbon sink function measured for the afforested land provides evidence that the Grain-for-Green project has successfully excavated the carbon sink potential of the Shaanxi province and served as an important milestone for establishing an effective organic carbon management program. [ABSTRACT FROM AUTHOR]

The green mirid bug Apolygus lucorum is a regional pest of multiple crops in northern China, and the survival and development of diapausing eggs during winter plays an important role in the population dynamics of this species. The effect of water on the survival and development of A. lucorum eggs was investigated using laboratory-induced diapause. Diapausing eggs were exposed to various humidity regimes under three conditions: (1) termination of diapause with exposure to warm long-day (WLD) conditions (i.e., 26 ± 1°C and 75 ± 5% relative humidity (RH) under a photoperiod of 16 hours light and 8 hours dark), (2) termination of diapause by chilling at 4°C, or (3) during the post-diapause stage, i.e., from transfer to WLD conditions after chilling, until the hatching of nymphs. The results indicate that water availability is crucial for the post-diapause resumption of development of A. lucorum. However, exposure to excessive moisture was detrimental, as indicated by a decrease in diapause termination rate and a prolonged pre-hatching period of diapausing eggs, compared to limited moisture conditions. This implies that both too dry and too humid environmental conditions would suppress survival and postpone hatching of overwintered A. lucorum eggs, and might explain why this pest has not caused severe damage in either southern or western China where the respective climates are very humid or dry. [ABSTRACT FROM AUTHOR]