Search

This work describes a sensitive voltammetric immunosensor for label‐free electroanalysis of the prostate specific antigen (PSA), the main biomarker of prostate cancer. A gold electrode was firstly modified with the optimum self‐assembled monolayer (SAM), 1,6‐hexanedithiol, followed by the subsequent adsorption of gold nanoparticles (AuNPs) and, then, the monoclonal antibody to recognize PSA was immobilized. The influence of the most significant experimental variables (SAM type and incubation time, AuNPs deposition, antibody concentration and bovine serum albumin immobilization) on the biosensor response was studied by microscopy and voltammetry techniques. The electroanalytical detection was based on the interaction between PSA antibody and PSA via square‐wave voltammetry using ferrocyanide/ferricyanide as electrochemical redox indicator. Using the proposed immunosensor, PSA was specifically detected within the linear range between 0.2 and 200 ng mL−1 with 0.01 ng mL−1 as limit of detection. The immunosensor allows accurate, reproducible and sensitive (22.7 % reduction mL ng−1) detection in a concentration range useful for clinical purposes. [ABSTRACT FROM AUTHOR]

A bi-enzymatic biosensor (LACC–TYR–AuNPs–CS/GPE) for carbamates was prepared in a single step by electrodeposition of a hybrid film onto a graphene doped carbon paste electrode (GPE). Graphene and the gold nanoparticles (AuNPs) were morphologically characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, dynamic light scattering and laser Doppler velocimetry. The electrodeposited hybrid film was composed of laccase (LACC), tyrosinase (TYR) and AuNPs entrapped in a chitosan (CS) polymeric matrix. Experimental parameters, namely graphene redox state, AuNPs:CS ratio, enzymes concentration, pH and inhibition time were evaluated. LACC–TYR–AuNPs–CS/GPE exhibited an improved Michaelis–Menten kinetic constant (26.9±0.5M) when compared with LACC–AuNPs–CS/GPE (37.8±0.2M) and TYR–AuNPs–CS/GPE (52.3±0.4M). Using 4-aminophenol as substrate at pH5.5, the device presented wide linear ranges, low detection limits (1.68×10−9 ±1.18×10−10–2.15×10−7 ±3.41×10−9 M), high accuracy, sensitivity (1.13×106 ±8.11×104–2.19×108 ±2.51×107 %inhibitionM−1), repeatability (1.2–5.8% RSD), reproducibility (3.2–6.5% RSD) and stability (ca. twenty days) to determine carbaryl, formetanate hydrochloride, propoxur and ziram in citrus fruits based on their inhibitory capacity on the polyphenoloxidases activity. Recoveries at two fortified levels ranged from 93.8±0.3% (lemon) to 97.8±0.3% (orange). Glucose, citric acid and ascorbic acid do not interfere significantly in the electroanalysis. The proposed electroanalytical procedure can be a promising tool for food safety control. [ABSTRACT FROM AUTHOR]

This work describes the development of an electrochemical enzymatic biosensor for quantification of the pesticide formetanate hydrochloride (FMT). It is based on a gold electrode modified with electrodeposited gold nanoparticles and laccase. The principle behind its development relies on FMT's capacity to inhibit the laccase catalytic reaction that occurs in the presence of phenolic substrates. The optimum values for the relevant experimental variables such as gold nanoparticles electrochemical deposition (at −0.2V for 100s), laccase immobilization (via glutaraldehyde cross-linking), laccase concentration (12.4mg/mL), substrate selection and concentration (5.83×10−5 M of aminophenol), pH (5.0), buffer (Britton–Robinson), and square-wave voltammetric parameters were determined. The developed biosensor was successfully applied to FMT determination in mango and grapes. The attained limit of detection was 9.5×10−8 ±9.5×10−10 M (0.02±2.6×10−4 mg/kg on a fresh fruit weight basis). Recoveries for the five tested spiking levels ranged from 95.5±2.9 (grapes) to 108.6±2.5% (mango). The results indicated that the proposed device presents suitable characteristics in terms of sensitivity (20.58±0.49A/μM), linearity (9.43×10−7 to 1.13×10−5 M), accuracy, repeatability (RSD of 1.4%), reproducibility (RSD of 1.8%) and stability (19days) for testing of compliance with established maximum residue limits of FMT in fruits and vegetables. [ABSTRACT FROM AUTHOR]

Abstract: The relentless discovery of cancer biomarkers demands improved methods for their detection. In this work, we developed protein imprinted polymer on three-dimensional gold nanoelectrode ensemble (GNEE) to detect epithelial ovarian cancer antigen-125 (CA 125), a protein biomarker associated with ovarian cancer. CA 125 is the standard tumor marker used to follow women during or after treatment for epithelial ovarian cancer. The template protein CA 125 was initially incorporated into the thin-film coating and, upon extraction of protein from the accessible surfaces on the thin film, imprints for CA 125 were formed. The fabrication and analysis of the CA 125 imprinted GNEE was done by using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques. The surfaces of the very thin, protein imprinted sites on GNEE are utilized for immunospecific capture of CA 125 molecules, and the mass of bound on the electrode surface can be detected as a reduction in the faradic current from the redox marker. Under optimal conditions, the developed sensor showed good increments at the studied concentration range of 0.5–400UmL−1. The lowest detection limit was found to be 0.5UmL−1. Spiked human blood serum and unknown real serum samples were analyzed. The presence of non-specific proteins in the serum did not significantly affect the sensitivity of our assay. Molecular imprinting using synthetic polymers and nanomaterials provides an alternative approach to the trace detection of biomarker proteins. [Copyright &y& Elsevier]