Search

Calcite cement is a common type of cementation in tight sandstone reservoirs of the Upper Triassic Yanchang Formation Chang 8 Member in the Zhijing-Ansai area of the Ordos Basin, which has significant influence on reservoir densification and heterogeneity. Calcite cements affect the quality of the reservoir conspicuously. The characteristics and origins of calcite were investigated using a series of approaches from the perspective of petrography and geochemistry, including thin section observation and identification, cathode luminescence, scanning electron microscopy, AMICS analysis, LA-ICP-MS elements analysis, and carbon and oxygen isotopes analysis. The results of all analytical tests indicated that calcite cements can be divided into two types according to their occurrence and origins. Type-I calcite cements mainly occur in sandstone reservoirs near the sandstone–mudstone interface or the sandstone layers adjacent to mudstone. Generally, there is no chlorite coating around them, and they appear dark orange under cathode luminescence. The carbon source of Type-I calcite cements may be related to the compaction and drainage of mudstone. Type-II calcite cements are formed in the early stage, and their carbon source may be related to the compaction and drainage of the adjacent mudstone. Type-II calcite cements are surrounded by chlorite coating primarily present in the interior of fine-grained sandstone, showing as bright yellow under cathode luminescence. Decarboxylation of organic matter in the source rocks may provide a crucial source of carbon for Type-II calcite cements. [ABSTRACT FROM AUTHOR]

Understanding diagenetic fluid types and their effects on diagenesis is important to identify the main control factors of reservoir characteristics and predict reservoir sweet spots. Reservoir space destruction caused by strong cementation is notable in the Lower Jurassic Ahe Formation sandstones near the deep-rooted fault (Yiqikelike Fault) in the Kuqa depression. Different authigenic minerals and widely varying cementation contents indicate the complexity of diagenetic fluids. Therefore, we investigated strong cementation using petrographic and geochemical methods, including cathodoluminescence, scanning electron microscopy, laser ablation inductively coupled plasma mass spectrometry, and stable isotope analysis. The contents of authigenic quartz and calcite increased as they approached the deep-rooted fault, with maximum concentration of quartz and calcite of up to 8.73% and 8.92%, respectively. Abnormally high homogenization temperatures of the fluid inclusions were observed in the quartz overgrowth, one of which reached 156 °C. In calcite, the rare earth element Eu exhibited abnormal characteristics, and the carbon isotopes ranged from −8.00‰ to −2.00‰. Therefore, it is likely that deep fluids are involved in reservoir diagenesis near a deep-rooted fault. This study provides a good example of diagenetic evolution in deep sandstone reservoirs and the negative effects of the involvement of deep fluids in diagenetic processes. • The deep fluids were involved in cementation of diagenesis in Jurassic Ahe Formation sandstones near the deep-rooted fault. • The deep fluids provided material source for authigenic quartz and calcite. • The deep fluid is one reason for the difference in diagenesis between the areas near and far from the deep-rooted fault. [ABSTRACT FROM AUTHOR]

Understanding reservoir heterogeneity and associated diagenesis, have a paramount importance for efficient petroleum exploration and development strategies. Diagenetic variations and factors that control these processes have, therefore, been investigated in this study using petrographic and geochemical methods, including cathodoluminescence, scanning electron microscopy, x-ray fluorescence, electron probe microanalyses and stable isotope analysis. Mechanical compaction and chemical diagenesis trends have obviously varied as a function of rock types and geological locations. The conglomerate reservoirs with high content of tuffaceous matrix and characterized by poor sorting showed stronger compaction. The tuffaceous matrix displays a large degree of dissolution during the progressive burial diagenesis due to its thermodynamic instability. The tuffaceous matrix in Na-rich conglomerate reservoir rocks mainly transformed into analcite, while it transformed into illite in K-rich conglomerate reservoir rocks. In most conglomerate reservoirs far away from deep-rooted faults, calcite cements are indicated to have been sourced from the decarboxylation of organic matter in the interbedded mudstones. Carbonate cements in conglomerate reservoirs near the deep-rooted faults possibly formed from hydrothermal fluids or thermochemical oxidation of pre-existing methane accumulations. This study can serve us an excellent example for the control of sediment composition and paleo-fluid evolution on diagenetic variations in fan-delta conglomerate reservoirs. • Compaction and dissolution in conglomerate reservoirs were controlled by sediment composition and texture. • Authigenic silicoaluminate minerals formation in conglomerate reservoirs were controlled by sediment composition. • Carbonate cements formation in conglomerate reservoirs were controlled by paleo-fluids evolution. [ABSTRACT FROM AUTHOR]

Sandy-conglomerate reservoir has gradually become a major target of oil and gas exploration. Complex diagenetic process and diagenetic fluid play a significant role in affecting reservoir heterogeneity. Carbonate cements form at various stages of the diagenesis process and record various geological fluid information. Recently, one-billion-ton sandy conglomerate oil field was exposed in Triassic Baikouquan Formation, Mahu sag, Junggar Basin. Therefore, an integrated study applying casting thin sections, cathodeluminescence, fluorescence, carbon and oxygen stable isotopes, electronic probe microanalysis and aqueous fluid inclusions measurements was performed in order to identify the types of carbonate mineral and its representative diagenetic environment and discuss the influences of different CO2 injections on reservoir quality. The main findings are as follows: The reservoir is mainly composed of 70.33% conglomerate and 16.06% coarse-grained sandstone. They are characterized by low compositional maturity and abundant lithic debris. Four types carbonate cements are identified according to the petrological and geochemical characteristics, including two types of Mn-rich calcite, ferroan calcite, siderite and dawsonite. They display an unusual broad spectrum of δ13C values (−54.99‰ to +8.8‰), suggesting both organic and inorganic CO2 injections. The δ13C values of siderite are close to 0, and its formation is related to meteoric water. The δ13C values of ferroan calcite and the occurrence of dawsonite indicate the trace of inorganic mantle-derived magmatic fluids. The δ13C values and trace elements of Mn-rich calcite record the information of hydrocarbon-bearing fluids. The fluid inclusions measurement data and reservoir properties and oil-test data show that the oil content of reservoir is not only affected by the formation time of different cements, but also by the relative content of dissolution and cementation. For these reservoirs altered by carbonate cements, it does not cause poor oil-bearing due to blockage of secondary minerals. [ABSTRACT FROM AUTHOR]

The influence of oil-wet calcite cements on oil migration in clastic reservoirs is of significant interest in the field of petroleum exploration. However, the microscopic migration of oil in microscopic pore spaces with oil-wet calcite cements has not been directly observed. Microscopic observations of oil migration were conducted in a glass micromodel at normal temperature and pressure to investigate the influence mechanism of oil-wet calcite cements on oil migration in pore spaces. The calcites were precipitated as cements prior to the oil migration. A two-dimensional glass micromodel with two interconnected spaces with the same pore throat structures was used in the experimental study. A new method to create firmly adhering calcites was used to precipitate equal amounts of calcites in the two interconnected spaces. The oil migration was recorded in real-time under a microscope throughout the experiment. The experimental results show that oil migration occurs faster in spaces with than without oil-wet calcites. During the oil migration in the pore-throat spaces, the oil migrates towards the surfaces of the oil-wet calcites when the oil is in contact with the calcites. The presence of oil-wet calcites significantly reduces the oil breakthrough pressure. The electrostatic attraction between the carboxylic groups and calcites and the intermolecular forces between the carboxylic groups and organic molecules in the oil cause the oil migration towards the surfaces of the oil-wet calcites. The experimental results indicate that oil preferentially migrates into clastic reservoirs that possess appropriate amounts of oil-wet calcite cements precipitated prior to oil emplacement. • Experimental method that allows calcite to precipitate and adhere tightly in glass micromodel was developed. • Microscopic processes of the influence of oil-wet calcites on oil migration in pore spaces were observed in micromodel. • Mechanism of oil-wet carbonate minerals affecting oil migration and accumulation in pore spaces was discussed. [ABSTRACT FROM AUTHOR]