Search

This paper examines the processes that drive Arctic anomalous surface warming and sea ice loss during winter-season tropospheric energy flux events, synoptic periods of increased tropospheric energy flux convergence (Ftrop), using the NASA MERRA-2 reanalysis. During an event, a poleward anomaly in Ftrop initially increases the sensible and latent energy of the Arctic troposphere; as the warm and moist troposphere loses heat, the anomalous energy source is balanced by a flux upward across the tropopause and a downward net surface flux. A new metric for the Arctic surface heating efficiency (Etrop) is defined, which measures the fraction of the energy source that reaches the surface. Composites of high-, medium-, and low-efficiency events help identify key physical factors, including the vertical structure of Ftrop and Arctic surface preconditioning. In high-efficiency events (Etrop ≥ 0.63), a bottom-heavy poleward Ftrop occurs in the presence of an anomalously warm and unstratified Arctic—a consequence of decreased sea ice—resulting in increased vertical mixing, enhanced near-surface warming and moistening, and further sea ice loss. Smaller Etrop, and thus weaker surface impacts, are found in events with anomalously large initial sea ice extent and more vertically uniform Ftrop. These differences in Etrop are manifested primarily through turbulent heat fluxes rather than downward longwave radiation. The frequency of high-efficiency events has increased from the period 1980–99 to the period 2000–19, contributing to Arctic surface warming and sea ice decline. [ABSTRACT FROM AUTHOR]

Biomass use for energy and materials is, on the one hand, one of the key mitigation options to reach the 1.5 °C GMT target set in the Paris Agreement, as highlighted by the IPCC and many other key analyses. On the other hand, particularly in parts of the EU, a strong negative connotation has emerged in public debate and EC policy, with a particular emphasis on the (presumed) displacement effect in markets and land use. This is a remarkable contrast because the reasons to use sustainable biomass, on the one hand, and the possibilities and synergies for supplying sustainable biomass, on the other, are underpinned with strong evidence, also providing insights on how displacement issues can be avoided. Sustainable biomass supplies can contribute 20–30% of the future global and European energy supply, leading to reduced overall mitigation costs, including realizing the net CO2 removal from the atmosphere using BECCS concepts. This paper highlights which options, pathways and preconditions are key to achieving such a substantial contribution of sustainable biomass in future (2050) energy and material supply (with a focus on the European setting). By pinpointing how "biomass can be done right" and how important synergies can be achieved via better agricultural methods, the restoration of marginal and degraded lands and the adaptation of climate change, a different policy agenda emerges in sharp contrast to how a biobased economy has been framed in recent years. It is recommended that future policy priorities, particularly at the EU level, take a more integral view on the synergy between the role of biomass in the energy transition, climate adaptation and mitigation, better agriculture and the better use of land in general. Strategies to achieve such positive results typically require an alignment between renewable energy, and agricultural, environmental, mitigation and adaptation policies, which is a largely missing nexus in different policy arenas. Resolving this lack of alignment offers a major opportunity, globally, to contribute to the European Green deal and improve energy security. [ABSTRACT FROM AUTHOR]

Energy efficiency policies can help to reduce energy use and mitigate the effects of climate change. This paper examines the U.S. and Chinese economies by applying HEM to both. Key sectors absorbing more energy from other sectors by purchasing intermediate products from them and, simultaneously, transferring more energy by selling products to the rest of the sectors are identified. This provides insights for decision-making on appropriate energy efficiency policies. It appears that the U.S. economy should focus on the service sector, and the Chinese should focus on the industrial sector. [ABSTRACT FROM AUTHOR]

School establishments have been considered the foundation of various civilizations, due to the importance of the educational process in producing future generations and shaping healthy societies. This paper aims to evaluate the thermal comfort sensation of pupils in school buildings under hostile climatic conditions in hot arid regions. The study employed the use of the post-occupancy approach with subjective assessments through questionnaires and physical measurements of the environmental physical parameters of thermal comfort: temperature, relative humidity, and air velocity as objective assessments. These measurements were in parallel with survey questionnaires that were undertaken during regular class sessions covering the hot and cold conditions of a school year, polling responses from 281 participants on their perception of the indoor climate. Finger's comfort indicators are calculated (PMV, predicted mean vote; and PPD, predicted percentage of dissatisfied people); and the actual people's clothing and metabolic rate are estimated in order to conclude the prevailing indoor thermal conditions. The investigations were carried out on three samples of school buildings in Biskra (Algeria) of different architectural styles. The study's results revealed that the levels of temperature were the most crucial parameter that influenced the thermal sensation with an average of 35C° with a PMV of 2.48, and 15C° in winter with a PMV of -2.56, indicating more than 90% dissatisfaction. Therefore, a well-thought bioclimatic school design is needed to ensure acceptable indoors, and promote healthy and safe learning spaces, by adopting sustainable design principles and low-energy-consuming techniques. [ABSTRACT FROM AUTHOR]

The dairy industry requires substantial energy resources at all stages of production and supply to meet consumer needs in terms of quantity, quality and food safety. The expected future climate change effects will cause serious uncertainty to the dairy industry. Adapting to these upcoming conditions is a challenge and one that is compounded by the continuous increase in food demand, as a result of global population growth. Predictably, under current conditions, this situation might lead to a significant increase in the energy requirements of the dairy industry. Therefore, there is a clear need to mitigate energy use through enhanced energy conservation, waste reduction and waste management. This review paper presents and discusses alternative dairy operations and mitigation strategies that have the potential to lead the dairy industry towards net-zero carbon emissions. Further, the focus of this work turns to supply chain energy modelling (SCEM) as means to mitigate energy use, while relevant work in the literature is reviewed. Supply chain energy models can provide a complete overview of the energy demand and the energy mix of a dairy supply chain. Additionally, they can highlight the most energy consuming processes and allow the evaluation of alternative energy-saving operations that can lead towards the net-zero carbon target. Overall, the development or use of computational tools for simulating the energy demand in the industry has strong potential for improving sustainability across the dairy supply chain. • Insight on climate change effects on the dairy supply chain and impact on energy demand. • Understanding the relevance and importance of the "net-zero" carbon emissions target in the dairy supply chain. • Identification of novel energy mitigation strategies across the dairy supply chain. • Importance of developing supply chain energy models (SCEM) to address energy mitigation in the dairy sector. • Evaluation of modelling techniques to develop or deliver supply chain energy models. [ABSTRACT FROM AUTHOR]

• The complex interconnectedness of climate change, energy demand, and health and long-term care poses current and future cascading challenges for the resilience of older people. • Key interconnections include a concern for the impact of frequent and intense weather events parallel to a global increase in life expectancy and social justice issues connected with strained resources and public infrastructure. • Comprehensive, targeted policies are needed on the national and global level that incentivize sustainable practices, enhance climate resilience, and support vulnerable populations in the Global South, and that mitigate the social justice implications of climate change for older adults. Challenges faced by many countries are energy insecurity, climate change, and the health and long-term care of growing numbers of older people. These challenges are increasingly intersecting with rising energy prices, aging populations, and an increased frequency and intensity of extreme climate events. This paper gives a deeper understanding of the current and predicted interconnections among these challenges through narrative-driven content and thematic analysis from workshops with a diverse group of international stakeholders from the Global North and Global South. Narratives emerged highlighting a complex nexus of interconnections and presenting critical action areas. Targeted local and global policies and interventions are needed to alleviate stress on health systems, encourage the integrated uptake of clean energy sources, and uphold social justice across all economies. Professionals can use this work to inform the design and implementation of effective interventions and increase the resilience of older adults by better preparing for systemic risks. [ABSTRACT FROM AUTHOR]

The solution to climate change demands new strategies in building sector. Thus, a review of existing literature was conducted to find out the new thinking in building sector in relation to climate change. The objectives were to: examine the relationship between climate change and building construction; identify paradigm shifts in building policies as a response to climate change and to find out climate change mitigation and adaptation strategies in the building sector. These were achieved through the review of literature published in the era of the recent global climate change from late 90s to date. Selection of paper was based on relevancy to the topic and date of publication. Preference was given to papers that link climate change with building sector, especially those that portray paradigm shift. Result showed that there are strong link between climate change and the building sector. As all previous reports reviewed revealed that climate change adversely affect building, a good number also argued that building construction is responsible for climate change mainly in terms of energy use and surface transformation/exposure. Although, there seems to be conflicting ideas on cause and effects between climate change and building construction, there is a general agreement that climate change affects building sector. Scholars also agree on integration of climatic parameters in building sector. Climate change has become a basis for policy reform in the building sector as many studies recommended knowledge and inclusion of climatic parameters in building planning, design, construction and use. Mitigation and adaptation of buildings to flood and extreme temperature were the common concerns of most studies. Raising of floor, use of local materials, orientation of building in accordance to sun and wind direction are among the mitigation and adaptation options for building construction in the face of changing climate. [ABSTRACT FROM AUTHOR]

Summary: Computationally intelligent energy forecasting methods for appropriate energy management at the consumer/producer side have a positive impact on the preservation of energy and play a constructive role in tackling global climate change. The energy production and consumption are very high worldwide, demanding intelligent methods with real‐world implementation potentials for appropriate energy management. In this paper, we survey the existing intelligent load forecasting (ILF) systems, highlight their advantages and downsides, and briefly discuss the workflow of the employed literature. Furthermore, we debate on the existing load forecasting datasets and their features along with a brief overview of the challenges confronted by researchers using these datasets. Distinct from previous survey papers, we provide a detailed review of performance evaluation metrics and comparison of employed methods for energy load forecasting, thereby concluding the need of efficient, effective, and adoptable ILF methods functional in real‐world scenarios. Finally, we assess the employed techniques and deliver future research opportunities based on the derived conclusions from existing research works. This paper delivers the overall energy forecasting literature in a compact form with possible future insights for researchers working in ILF domain. [ABSTRACT FROM AUTHOR]

• The mechanism of rolling resistance of asphalt pavements is presented. • The measuring and modelling approaches of rolling resistance are summarised. • The prediction methods of fuel consumption and environmental impact are reviewed. In the context of climate change and global warming, the attention on the environmental cost of pavements is increasing. To scientifically quantify the environmental cost of pavements, accurate prediction of rolling resistance and fuel consumption is important. In this paper, a comprehensive review on rolling resistance of asphalt pavements and its environmental impact was presented. At first, the commonly used definitions of rolling resistance and texture characterisation methods of pavement surface were introduced. Then, the influence of different factors on rolling resistance was discussed. Next, the measuring and modelling approaches of rolling resistance were reviewed. At last, methods which can be used to predict fuel consumption and environmental impact were presented. It was found that an ideal approach for texture characterisation of pavement surface is to make use of the entire wavelength spectrum of road profiles and consider the enveloping curve of tire treads. Furthermore, the fact that rolling resistance can be influenced by different factors introduces difficulties in accurate measurement and modelling of rolling resistance. Moreover, testing methods and conditions have a significant effect on the empirical modelling of rolling resistance, while it is difficult and time-consuming to consider all the energy loss in the computational modelling of rolling resistance. In addition, the prediction of fuel consumption and environmental impact highly depends on the formulating methods and measuring conditions. The work presented in this paper will help to gain more insight into rolling resistance and its environmental impact, which ultimately promotes the construction of environmentally friendly pavements. [ABSTRACT FROM AUTHOR]

Turkey has been one of the earliest participants of the international climate policy process, since the Ministerial Conference on Atmospheric Pollution and Climate Change held in 1989. The country has prepared strategy documents, actions plans, sectoral policies, and projects to detect and adapt climate change effects. However, any of this has not turned into a main plan to support climate change mitigation on an international scale. The purpose of this paper is to identify local climate change mitigation strategies of Sakarya city, Turkey, by strengths, weaknesses, opportunities, and threats (SWOT) analysis. For this purpose, relevant information were gathered from Covenant of Mayors, greenhouse gas inventories of the city, National Energy Efficiency Action Plan, online workshop with 44 local stakeholders from private sector and local universities held on 13.10.2020. The results emphasized the importance of the cross-link between local adaptation and mitigation in terms of energy demand and energy-based emissions on national and international scale. [ABSTRACT FROM AUTHOR]

When evaluating different roadway design alternatives, environmental impacts attributed to vehicular emissions should be considered as significant as their traffic safety and operational performances. In today's world we are aware of the impacts of climate change and global warming. As freight and passenger travel demands increase, so does congestion and emissions from transportation vehicles, which have drawn a significant attention in recent years. Transportation is the highest contributor to U.S. greenhouse gas (GHG) emissions by economic sectors. Vissim emission calculator provides an opportunity to perform a comparative emissions analysis. This paper summarizes a case study of an existing service interchange, a conventional diamond interchange (CDI) at Austin Blvd on 1-75 located 12 miles south of downtown Dayton, Ohio with other two alternative designs, a diverging diamond interchange (DDI) and a single point urban interchange (SPUI), in terms of fuel consumptions, emissions, and traffic operations for similar traffic conditions, and roadway characteristics through microsimulation. In this study we focused on three critical pollutant gases emitted from vehicles' exhaust pipes, i.e., carbon dioxide, carbon monoxide and nitrogen oxides, including fuel consumption. In addition, the study selected average stopped delay and average queue length for traffic operations measures of effectiveness (MOEs) because these two reflect all others in terms of the expected trends and expectations. The signal optimization for each interchange was conducted utilizing PTV Vistro and traffic simulation and emissions analysis using PTV Vissim. The results indicate that the existing CDI design results in much higher emission rates than the SPUI and the DDI for each traffic level condition considered. Although the SPUI's and DDI's performances were very close, a significant difference was observed at higher traffic volumes. Generally, emissions at the DDI design were lower compared to the SPUI design. [ABSTRACT FROM AUTHOR]

Improved biomass cookstoves have been widely proven to be more efficient than traditional cookstoves. They are however mostly designed as single burners to utilize one fuel type. This paper presents the development of a double burner natural-draft biomass cookstove. The study conforms with the global effort of harnessing clean and efficient methods of cooking towards curtailing deforestation and mitigating the impacts of climate change. The cookstove was designed as a batch-fed double burner type with a ceramic insulated combustion chamber. The insulators were equally made detachable to ease maintenance. The cookstove was evaluated and thermal efficiency, specific fuel consumption, time spent in boiling per given weight of water, and firepower were determined. The result of the experimental analysis yielded a mean thermal efficiency ranging from 17.2% - 33.1%, mean specific fuel consumption of 0.019 - 0.089, mean time spent in boiling per given weight of water of 0.172 - 0.354 h kg-1, and mean firepower of 0.458 - 3.324 kW. In line with the performance indicators, the developed cookstove was found to be energy efficient for domestic cooking with the potential to save fuel and emit less pollutants to the environment. Further studies should focus on evaluating the cookstove with other forms of biomass fuel and insulators. [ABSTRACT FROM AUTHOR]

According to the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment report, energy-efficient appliances can reduce global electricity consumption even though there is an expected increase in the number and ownership of appliances. The International Energy Agency (IEA) expects a high increase in energy efficiency in traditional appliances (refrigerators, washing machines, television, etc.), and in the number of new appliances installed (also called plug loads). The bibliometric study of publications related to energy-efficient appliances carried out in this paper shows that research on this topic is growing in developed regions (North America and Europe) and even more in some developing regions (Asia Pacific) with a high emphasis on China and India. The results indicate that, in general, policies are always implemented before the core of publications on the topic, with time spans ranging from 3 to 30 years. However, the trend seems to be changing with publications related to new appliances where the core research happens shortly after or in parallel to the establishment of policies. [ABSTRACT FROM AUTHOR]

Abstract With fast development and urbanization, Chinese cities are facing several challenges including issues of environmental pollution, climate change, resource depletion and landfills shortage. Waste recycling is one effective way to respond these challenges. Under such a situation, this paper aims to evaluate energy saving and carbon reduction potential of recycling wastes by taking Shanghai, the biggest city in China, as a case study. Results show that 8.7 Mt standard coal (tce) and 16.81 Mt CO 2 could be reduced under current recycling system in Shanghai. And recycling of waste steel and nonferrous metals were the two dominant contributors, accounting for about 44% and 42% of energy saving, and 60% and 33% of CO 2 reduction, respectively. If the recycling rates of main recyclable wastes were improved to 100%, additional 6.44 Mt energy and 10.02 Mt CO 2 could be further saved, mainly from recycling waste glass, waste plastic and waste metals. Adoption of RPF (Refuse Plastic & paper Fuel) could further contribute to 1.24 Mt energy saving and 2.67 Mt CO 2 reduction. Finally, policy implications on establishing a mature recycling system and promoting RPF technologies are discussed, in which the potential on reducing total energy consumption and CO 2 emission of Shanghai can reach 6.6% and 4.9%, respectively. [ABSTRACT FROM AUTHOR]

Agricultural tractors may idle from 10 to 43% of their entire operating life and this inoperative time must be minimised because it is detrimental to the environment, public health, fuel economy, and engine lifespan (Perozzi et al., 2016). On passenger cars, start and stop (SS) systems have been extensively used, but they are not currently installed in any commercial tractor. Studies show that for very short idling stops SS systems might be ineffective for the additional energy required for re-starting the engine. This study aims to investigate the potential advantages of SS systems on agricultural tractors. To this aim, the energy required for engine start-up and the subsequent emissions were measured and then compared with the energy and the emissions during idling. Moreover, a predefined control strategy of the SS system was developed, and its potential fuel and emission savings were estimated using real-world data. In terms of fuel consumption and CO emission, turning off the engine is recommended for stops longer than 4 s and 134 s, respectively. From the collected real-world data, the tractor was run on idle for 21.7% of the entire operating duration. The results obtained with the SS control strategy developed in this paper applied to the US area, where there are 1.2 million tractors of the same power level of the tractor used in this study with a yearly usage up to 850 h, would permit to save 285.6 million litres of fuel, and, respectively of 16.5 and 754 tons of CO and CO 2. • Turning off the engine for idling stops longer than 4 s leads to fuel savings. • Turning off the engine for idling stops longer than 134 s leads to CO savings. • 45% of idling time could be avoided by farmers. • Start and Stop systems are an effective way for saving fuel and emissions. [ABSTRACT FROM AUTHOR]

In the context of smart cities, sustainability is an essential dimension. One of the ways to achieve sustainability and reduce the emission of greenhouse gases in smart cities is through the promotion of sustainable energy. The demand for affordable and reliable electrical energy requires different energy sources, where the cost of production often outweighs the environmental factor. This paper aims to investigate the ways smart cities promote sustainability in the electricity sector. For this, a systematic literature review using the PRISMA protocol was employed as the methodological approach. In this review, 154 journal articles were thoroughly analyzed. The results were grouped according to the themes and categorized into energy efficiency, renewable energies, and energy and urban planning. The study findings revealed the following: (a) global academic publication landscape for smart city and energy sustainability research; (b) unbalanced publications when critically evaluating geographical continents' energy use intensity vs. smart cities' energy sustainability research outcomes; (c) there is a heavy concentration on the technology dimension of energy sustainability and efficiency, and renewables topics in the literature, but much less attention is paid to the energy and urban planning issues. The insights generated inform urban and energy authorities and provide scholars with directions for prospective research. [ABSTRACT FROM AUTHOR]

The excessive carbon emissions not only intensify the global climate change, but also seriously restrict the sustainable development of social economy. However, improving industrial carbon emissions efficiency is the most directly effective way to reduce emissions. Therefore, accurate measurement and analysis of carbon emissions efficiency and evolution characteristics of China's industrial system is the basis for China to improve carbon emissions efficiency. Based on this, we adopted energy consumption method and input-output method to calculate and analyze the industrial carbon emissions efficiency and evolution characteristics of China from 2002 to 2015. The results show that (1) If carbon emissions from cement production are ignored and only energy-related carbon emissions are considered, the calculation results of carbon emissions efficiency of heavy industry will be overestimated about 30%. (2) Compared with 2002, China's industrial carbon emissions efficiency increased by about twice in 2015. Specifically, the optimization of carbon emissions efficiency in agriculture, construction, light industry and service industry is very obvious, which has increased by 5.65, 5.00, 4.69 and 4.68 times respectively; The optimization of carbon emissions efficiency in power sector, heavy industry, transportation and chemical industry was obvious, which increased by 2.55, 2.01, 1.86 and 1.47 times respectively; The carbon emissions efficiency of the fossil energy sector has decreased by 0.36 times. (3) The carbon emissions efficiency of various industries has significant differences. Among them, agriculture, service industry, light industry and construction industry are generally industries with higher carbon emissions efficiency, while power sector, fossil energy sector, transportation industry, chemical industry and heavy industry are generally industries with lower carbon emissions efficiency, especially power and fossil energy sectors. Based on these, this paper provides policy implications and scientific evidence for accurately improving carbon emissions efficiency from the perspective of carbon emissions efficiency. [ABSTRACT FROM AUTHOR]

Summary: This paper is concerned with innovative approaches to renewable energy sources computation methodologies, which provide more refined results than the classical alternatives. Such refinements provide additional improvements especially for replacement of fossil energy usages that emit greenhouse gas (GHG) into the atmosphere leading to climate change impact. Current knowledge gap among each renewable energy source calculation is rather missing fundamentals of plausible, rational, and logical explanations for the interpretation of results. In the literature, there are rather complicated and mechanically applicable methodologies, which require input and output measurement data match with missing physical explanations. The view taken in this review paper is to concentrate on quite plausible, logical, rational, and effectively applicable innovative energy calculation methodologies with simplistic fundamentals. For this purpose, a set of renewable energy methodological approaches is revisited with their innovative structures concerning solar, wind, hydro, current, and geothermal energy resources. With the increase in the renewable energy utilizations to combat the undesirable impacts of global warming and climate change, there is a need for better models that will include physical environmental conditions and data properties in the probabilistic, statistical, stochastic, logical, and rational senses leading to refined and more reliable estimations with application examples in the text. Finally, new research directions are also recommended for more refined innovative energy system calculations. [ABSTRACT FROM AUTHOR]

The energy crisis caused by climate change is the most significant challenge of the 21st century. Single-objective and multi-objective optimization studies for buildings often only consider the building itself, without considering the impacts of climate change. However, in the future, energy-efficient design and appropriate operating parameters will be crucial considerations in the face of global climate change. This paper aims to discuss the impact of climate change in the humid-hot region over the past 60 years on the energy consumption of office buildings and propose countermeasures. Firstly, the meteorological data of Guangzhou from 1960 to 2020 is statistically analyzed, and four typical meteorological years and corresponding air conditioning design days are established. Secondly, Energyplus is used to simulate the building's energy consumption, and the energy consumption factors are analyzed for sensitivity using jEplus. Finally, a multi-objective optimization is performed using jEPlus + EA with the Non-dominated Sorting Genetic Algorithm (NSGA-II). The results found that climate change led to a significant increase in the duration of high outdoor temperatures during summer. Specifically, the daily dry-bulb temperature for air conditioning design increased by 0.4–0.7 °C, and due to climate change, the energy consumption of the office building increased by about 4.6 %. The main factor affecting the cooling energy consumption in summer was the indoor cooling set point (8.29%–30%), infiltration air volume (1.0%–8.6%), fresh air volume (3.2%–16.06%), the glazing solar transmission rate (1.25%–9.0%), building orientation (0%–1.43%), and relatively small influence of envelope insulation performance. The operation scheme determined by multi-objective optimization can reduce the cooling energy consumption of the building by 10.6%–16.8%, which can mitigate the rise in energy consumption resulting from climate change to a greater extent. [Display omitted] • Discuss the impact of climate change over the past 60 years on the energy consumption of office buildings. • There was a significant increase in the duration of high outdoor temperatures during the summer. • Multi-objective optimization is performed using jEPlus + EA. • Climate change caused energy consumption to increase by about 4.6 %. • Optimal solutions can reduce the cooling energy consumption of the building by 10.6%–16.8%. [ABSTRACT FROM AUTHOR]

This paper studies the influence of temperature and of rainfall intensity and the effect of such variations on the treatment efficiencies and on the electrical consumptions in seven medium-large size Wastewater Treatment Plants (WWTPs) in Apulia in South Italy (Bari, Barletta, Brindisi, Lecce, Foggia, Andria and Taranto). It has been observed, in the considered WWTPs, a slight but clear increase of the incoming flow due to the increase in rainfall intensity, which results to an increase of the energy consumption per incoming volume. The impact of the climate change to the incoming flow, during the last five years (2016–2020), has been assessed indicating that an increase in rainfall intensity results to an increase of the WWTPs energy consumptions per wastewater treated volume. More specifically, for a specific WWTP (Lecce) it was found that the electrical consumption increases from 0.36 kw/m3 to 0.51 kw/m3 when the rainfall intensity was increased from 0.8 mm/min to 2.9 mm/min. Some adaption measures have been considered to upgrade the existing WWTP so to mitigate the energy increase and to limit the global effects of climate change. [Display omitted] • As Rain intensity rises, wastewater influx into WWTPs increases. • Rainfall intensity influences negatively electrical consumptions. • BOD removal is lower with increasing annual precipitations. • Temperature influences BOD, COD and SST removal efficiency. [ABSTRACT FROM AUTHOR]

Given the significant energy consumption and carbon emissions associated with buildings, there is increasing interest in improving sustainability of building operations to reduce impact on climate change. A common goal is to operate buildings as "net-zero" energy users in which all energy consumed by the building is balanced against renewable energy purchased from the grid or produced on site. To achieve net-zero status, many buildings will require significant retrofit so as to both reduce energy consumption in the absolute sense and provide the remainder without consuming fossil fuels. Thus, multi-year planning is required to ensure that goals can be met on time. In addition, due to the inherent uncertainty associated with energy consumption and generation, actually achieving net-zero energy use may require discretionary curtailment actions to be taken, and deciding whether such actions are necessary can be challenging. To address these challenges, we propose in this paper a design optimization and operational planning strategy to make the decisions needed to achieve sustainability goals in buildings. The strategy can be applied to schedule design changes over a long horizon to meet annual targets, and it can also be applied in closed loop on a shorter horizon to determine whether curtailment is needed to stay on track. We discuss the formulation of the optimization problem, solution methods, and modeling approaches for key parameters. Application of the strategy is illustrated via examples. Overall, this approach will help automate planning that is often done manually, allowing buildings to take a significant leap forward toward achieving their sustainability goals. • Achieving sustainability goals in buildings requires multi-year planning. • The required design and operational decisions can be made via optimization. • Key problem parameters can be obtained from data-driven modeling. • The strategy allows sustainability goals to be met at minimum cost. [ABSTRACT FROM AUTHOR]

Practice social of people is the key to produce space and give a possibility to maintain thermal comfort and energy efficiency. The main objective of this research is to adapt the traditional strategies in the architecture actual, to achieved a thermal comfort and improve on reducing cooling load through the using of vernacular gait. Today, it is necessary to practice these systems in the current or conventional architecture of household. The study is especially for arid cities namely the region of Saoura, in the hot and dry climatic zone in Algeria, considered for this study. Two main factors is considered such as design and urban where taken into account in order to select the appropriate and specific passive cooling strategy. The results show that the passive cooling strategy of courtyard would be appropriate for arid regions, however a high thermal mass would be suitable for construction. In conclusion, this work made it possible to choose a suitable passive cooling strategy for all types of construction in hot and dry climates. Finally, this paper puts forward a set of recommendations to improve the passive design of future buildings in hot and arid climates. [ABSTRACT FROM AUTHOR]

• Overheating regulations and calculation methods in 26 European countries were compared. • Most of the existing calculation methods are outdated and do not fit climate-proof buildings. • France requires a mixed-mode operation of naturally ventilated households. • The UK developed a heatwave-based calculation approach. • Comfort-based, multi-zonal, and time-integrated calculation approaches are needed. With the ongoing significance of overheating calculations in the residential building sector, building codes such as the European Energy Performance of Building Directive (EPBD) are essential for harmonizing the indicators and performance thresholds. This paper investigates Europe's overheating calculation methods, indicators, and thresholds and evaluates their ability to address climate change and heat events. e study aims to identify the suitability of existing overheating calculation methods and propose recommendations for the EPBD. The study results provide a cross-sectional overview of twenty-six European countries. The most influential overheating calculation criteria are listed the best approaches are ranked. The paper provides a thorough comparative assessment and recommendations to align current calculations with climate-sensitive metrics. The results suggest a framework and key performance indicators that are comfort-based, multi-zonal, and time-integrated to calculate overheating and modify the EU's next building energy efficiency regulations. The results can help policymakers and building professionals to develop the next overheating calculation framework and approach for the future development of climate-proof and resilient residential buildings. [ABSTRACT FROM AUTHOR]

Reducing the shipping sector's contribution to climate change requires urgent emission reductions this decade. Both weather routing and wind propulsion offer immediate solutions, where combining sails with efficient routing amplifies the performance of each technology. However, while large emission savings are theoretically available, the impact of stochastic uncertainty from wind forecasts is unknown. Here, we present a novel approach that exploits fuel consumption calculations from over a thousand departures across three routes to characterise stochastic uncertainty. We show that routes with ideal wind conditions and long voyage times are most sensitive to uncertain forecast inputs, reducing savings from Flettner rotors and weather routing by up to 44% when a priori weather routing strategies are used. This paper further shows how an adaptive weather routing strategy can be used as an accurate prediction tool to reduce uncertainty on all routes investigated, reliably amplifying carbon savings from Flettner rotors by between 1.16 and 2.48 times typical great circle route savings. Overall, this paper provides greater assurance around the previously estimated carbon savings that serves to strengthen confidence in a wind-assisted decarbonisation strategy and its potential to provide essential emission reductions this decade. • We develop an a priori strategy to quantify stochastic uncertainty. • We discuss stochastic uncertainty when weather routing ships with wind propulsion. • We identify characteristics of routes that display high sensitivity to uncertainty. • We develop an adaptive strategy to reduce the impact of forecast uncertainty. • We discuss weather routing and wind propulsion as a decarbonisation strategy. [ABSTRACT FROM AUTHOR]

This paper set out to show the impacts of COVID-19 and climate change on smallholders through the lens of Sustainable Development Goals (SDGs) and ways to keep smallholders on the 2030 agenda. Descriptive statistical analysis of quantitative secondary data is applied to investigate the issues in question across world regions. Increasing energy and food demand have triggered greenhouse gas (GHG) emissions with effects on the environment, socio-economic and related sectors. If unchecked, climate change will jeopardize progress towards SDGs' agenda of ending hunger and poverty by 2030. COVID-19 exacerbates the underlying climate change impacts compromising food and water security. The widespread famines of Biblical proportions caused by COVID-19 effects are likely to cause more deaths than the virus. Improvement of water availability and food production is crucial to ending hunger and poverty. There is a need to strengthen smallholders' adaptation and mitigation capacity through cooperatives' platforms thereby reach out to smallholders who are the furthest first. International cooperation is urgent to support smallholders' adaptation of climate-smart agriculture to reduce GHG emissions thereby subdue climate impacts resulting in higher productivity, food security, poverty reduction and sustainable development. Cooperatives need support to facilitate adaptation and mitigation by applying site-specific technology to local needs and possibilities. [ABSTRACT FROM AUTHOR]

For insulation applications, boards thinner than 2 cm are under design with specific thermal conductivities lower than 15 mW m−1 K−1. This requires binding slightly hydrophobic aerogels which are highly nanoporous granular materials. To reach this step and ensure insulation board durability at the building scale, it is compulsory to design, characterise and analyse the microstructure at the nanoscale. It is indeed necessary to understand how the solid material is formed from a liquid suspension. This issue is addressed in this paper through wet-STEM experiments carried out in an Environmental Scanning Electron Microscope (ESEM). Latex-surfactant binary blends and latex-surfactant-aerogel ternary systems are studied, with two different surfactants of very different chemical structures. Image analysis is used to distinguish the different components and get quantitative morphological parameters which describe the sample architecture. The evolution of such morphological parameters during water evaporation permits a good understanding of the role of the surfactant. [ABSTRACT FROM AUTHOR]

The current work aims to analyze the existing situation in Romania compared to other EU countries, regarding bovines herds, given that this species is one of the ones that causes the highest level of greenhouse gases, with a direct effect on the environment and global warming. This is the reason why the subject has become a priority not only at the community level, but also worldwide. Through the Common Agricultural Policy, important funds have been allocated at the level of the European Union, which will continue to be allocated, not only for the reduction of climate change, but also for the adaptation of the states of the world to these existing climate changes at the global level. Given the path in which animal husbandry influences sustainable development, through the study we have followed both the effective changes, but also the obtained productions, with a direct impact on consumption. It was found that both at the community level, as well as at the national level, there was a decrease in bovines herds in in the period 2016-2020, the reasons being primarily of an economic nature, but equally important being the social and environmental ones. The analysis was carried out starting from the data published by the National Institute of Statistics and Eurostat, data that were then processed and analyzed with the help of statistical methods. Based on these, the conclusions were formulated that show us that in Romania the number of bovines herds decreased by 11% in the period 2016-2021. At the European Union level, Romania ranks 10th in terms of bovines herds and 20th in terms of density/100 ha. Although there are advances in terms of applied technologies or more productive breeds, at the global level the objectives pursued by the reduction of greenhouse gas emissions have not been influenced by these advances, which makes the activity of raising bovines to be considered one with effects negative effects on the environment, but also high consumption of energy and water, which in turn have a negative impact on climate change. [ABSTRACT FROM AUTHOR]

• The review on performance impact of different design components of PVT modules. • The electrical and thermal efficiency analysis from various researches work on PVT modules. • The performance capacity results of different PVT structures has been reviewed and presented. • Recommendations were drawn for future performance enhancement. The Photovoltaic/Thermal (PVT) technology has attracted many researchers and scholars in order to increase the level of renewable energy utilization minimizing the issues caused by climate change especially the global warming which has the main roots on the greenhouse emissions produced by nonrenewable energy utilization. A PVT module is a combination of photovoltaic (PV) technology and solar thermal (ST) technology that receives and converts solar radiation into electrical and thermal energy at the same time leaving less greenhouse emissions. Even though the PVT technology seems simple in some designs and has low utilization cost, the inadequate performance and initial costs of PVT modules can slowdown their market. Based on research work outcomes and analysis, the design components of PVT modules have a strong influence on the performance. Analyzing the performance impacts of different main components of PVT module is very important not only for researchers but also for manufacturers because it points out both weaknesses and strengths for further improvements and invention of the technology to meet the market requirements. In this paper we deeply investigated the performance of PVT modules and the performance influence of each of the main components of PVT module by making a comprehensive review, finding analysis, summarizing and presenting the outcomes. [ABSTRACT FROM AUTHOR]

This paper proposes a multi-carrier energy system or energy hub in which natural gas and electricity resources are used as inputs. The output demand profile includes electrical, heating and cooling energy, which is evaluated in four seasons. The significant differences in simulations and evaluation of the considered energy hub in different seasons have led to climate variation, resulting in higher electrical energy consumption in warmer seasons than thermal energy, while it is contrariwise in the cold season. When the customers are willing to participate in the demand response programs, total energy consumption decreases, and this can only change the pattern of customer consumption in the warmer seasons. A mixed-integer linear programing (MILP) formulation for this optimization problem is proposed and solved using the CPLEX solver in general algebraic modeling system (GAMS). Simulations of the energy hub system, including renewable wind and solar sources, will confirm and verify that the model provided represents a growth in energy hub profit, reducing the cost of purchased power from electricity grid as well as decreasing cost of social welfare. [ABSTRACT FROM AUTHOR]

This paper examines the effects of extreme temperatures on mortality rates, using random year-to-year variation in temperature based on county-level panel data from China. The analysis finds a robust, U-shaped relationship between temperature and mortality rates, indicating that extremely cold or hot temperatures lead to excess deaths. The heat-related (cold-related) effect is 3.5 times (3.2 times) as large as previous findings that used U.S. data, and it is especially large for the elderly population, mainly due to excess deaths caused by cardiovascular diseases. Applying these results to climate change predictions from Hadley Centre Global Environmental Model shows that by 2061–2080 the annual mortality rate is likely to increase by 14.2% if global greenhouse gas emissions continue to rise throughout the 21st century, the estimated health cost of which is around 0.98 trillion Chinese Yuan per year. The paper also explores households' adaptation behaviors to extreme temperatures. It finds that although urban households adaptively increase energy consumption when they are exposed to cold temperatures and purchase more air conditioners on hot and cold days, rural households are unresponsive to temperature fluctuations. This finding implies that rural people may be more resource constrained and suffer more when extreme temperatures occur. [ABSTRACT FROM AUTHOR]

Abstract Railways are a rather efficient transport mean, and yet there is increasing interest in reducing their energy consumption and making them more sustainable in the current context of climate change. Many studies try to model, analyse and optimise the energy consumed by railways, and there is a wide diversity of methods, techniques and approaches regarding how to formulate and solve this problem. This paper aims to provide insight into this topic by reviewing up to 52 papers related to railways energy consumption. Two main areas are analysed: modelling techniques used to simulate train(s) movement and energy consumption, and optimisation methods used to achieve more efficient train circulations in railway networks. The most used methods in each case are briefly described and the main trends found are analysed. Furthermore, a statistical study has been carried out to recognise relationships between methods and optimisation variables. It was found that deterministic models based on the Davis equation are by far (85% of the papers reviewed) the most common in terms of modelling. As for optimisation, meta-heuristic methods are the preferred choice (57.8%), particularly Genetic Algorithms. Highlights • Modelling and optimisation methods for railways energy efficiency are reviewed. • Modelling methods provide reliable simulations of the trains' energy consumption. • Optimisation methods help obtaining the most efficient solutions for train traffic. • Most used modelling methods are deterministic, based on Davis equation. • Most used optimisation methods are meta-heuristics, mainly genetic algorithms. [ABSTRACT FROM AUTHOR]

Abstract African countries are in a unique position to reap the socio-economic and environmental benefits of renewable resources as a means for meeting increasing energy demand in a sustainable way. A critical obstacle for the deployment of renewable energy technologies in Africa is the difficulty of attracting sufficient and affordable finance. This paper compares the impact of financial conditions on the cost of electricity generation across six renewable and three fossil-based technologies in 46 African countries. The results show large cost variations and highlight the extent to which renewables are disadvantaged by current financial practices. The energy-economy-environment model TIAM-ECN is used to show how lowering financing costs results in a much higher deployment of renewables. For example, solar PV could account for 10–15% of total electricity generation by 2050, even without explicit climate policy, thanks to financial de-risking programmes. The results demonstrate that changes in financing schemes could outweigh the impact of technology learning. This paper also demonstrates that, once ambitious climate policies are in place, reducing financing costs for renewables could be an efficient way to lower greenhouse gas emissions. Financial de-risking is thus a key ingredient for unlocking the renewable energy potential in Africa. Highlights • We show how renewables are disadvantaged by today's financial practices in Africa. • We show how lower financing costs result in a higher deployment of renewables. • PV can account for 10–15% of electricity generation by 2050 without climate policy. • Changes in financing schemes could outweigh the impact of technology learning. • Financial de-risking is key for unlocking the renewable energy potential in Africa. [ABSTRACT FROM AUTHOR]

Emissions reduction, energy security and energy affordability constitute core energy problems facing countries today. At the heart of these problems is the key issue of decarbonisation. Although there is an international drive to address the issue within the United Nations climate change regime, the domestic policy regime in the United States of America seems to be in conflict.While California has made, and is still making, positive strides in emissions reduction at a state level, the Trump administration seeks to lower the United States' fuel efficiency and emissions reduction standards at the federal level. Potentially this has multiple domestic, regional and international ramifications. This is in addition to the unpopular US withdrawal from the Paris Climate Change Agreement in 2017 by Trump. Accordingly, there is a need to understand the jurisprudential and philosophical underpinnings behind its changing stance and its relationship with the world. Against this backdrop, this paper critically examines the policy implications of these issues and argues for policy alignment between components of the federal structure and the need for persistent and concerted efforts by the nations to address climate change. The paper is divided into three parts. Part one examines the conflicting emissions reduction policies within the American federal system. Part two critically analyses the policy implications and need for policy alignment within the context of climate policy and part three draws conclusions and presents insights for further research. [ABSTRACT FROM AUTHOR]

Based on provincial panel data from 2000 to 2014, this paper measured the total factor energy efficiency by adopting the dynamic slacks-based measure model, and then employed the spatial econometric model to analyze the impact of regional mitigation of carbon dioxide on energy efficiency from both intra-regional and inter-regional perspectives in China. The results show the following: first, the average of total factor energy efficiency presents a rising trend from 2000 to 2014, and it shows a significant difference among regions. Second, the direct effect of carbon productivity on energy efficiency is positive, but the indirect effect is negative. The share ratio of direct and indirect effects is 1: −0.96; the total effect is positive but insignificant. Based on this conclusion, the paper provides some relevant policy suggestions and measures for regionally saving energy resources and relieving environmental constraints. [ABSTRACT FROM AUTHOR]

Abstract As a result of the increased awareness of the dangers posed by global climate changes (mainly caused by growing global energy consumption needs), the quest for clean and sustainable energy future is becoming of paramount importance. This can be largely realized via a large-scale integration of variable renewable energy sources (RESs) such as wind and solar, which have relatively low carbon footprints. In many power systems, the level of integration of such resources is dramatically increasing. However, their intermittent nature poses significant challenges in the predominantly conventional power systems that currently exist. Among others, frequency and voltage regulation issues can, for example, arise because of improperly balanced and largely uncoordinated RES supply and demand. Generally, the higher the integration level of intermittent power sources is, the higher the flexibility needs are in the system under consideration. Flexibility, in a power systems context, refers to the ability of such a system to effectively cope with unforeseen changes in operational situations, which are mainly induced by the inherent uncertainty and variability arising from the supply side, demand side or any other external factors. In the absence of appropriate flexibility mechanisms, it is increasingly difficult to manage the imbalances between generation and demand as a result of their natural variations in real-time. This paper presents an extensive and critical review of the main existing and emerging flexibility options that can be deployed in power systems to support the integration of "carbon-free" and variable power production technologies. Starting from a broader definition of flexibility, we highlight the growing importance of such flexibility in renewable-rich energy systems, and provide insights into the challenges and opportunities associated with various flexibility options provided by different technologies. Highlights • This paper presents an extensive and critical review of the main existing and emerging flexibility options. • Starting from a broader definition of flexibility, we highlight the growing importance of such flexibility. • Insights into the challenges and opportunities associated with various flexibility options are provided. • Certain barriers that may hinder their developments in the short to medium terms are also provided. [ABSTRACT FROM AUTHOR]

Abstract Numerous studies have investigated how small vulnerable territories are adapting to climate change, particularly non-interconnected islands with focus on Renewable Energy Sources (RES) and self-sufficiency. A key to success is an energy plan with appropriate policy tools. This paper first presents a discussion on barriers to RES deployment. Then, we present the energy situation and the legislative energy framework in Reunion Island. Are the legislative and policy frameworks sufficient to achieve the energy transition? This paper proposes an original view discussing the potential of a territory and available tools to develop RES. Energy transition is also view as an opportunity. Highlights • Reunion Island's potential for achieve the energy transition. • A complex legal context: town planning and energy planning not in phase. • A set of barriers identified and analysed isolated island. [ABSTRACT FROM AUTHOR]

Abstract Energy efficiency improvement is usually regarded as an effective way to decrease energy consumption and to fight climate change, but it also booms energy consumption through rebound effects. But the improvement of energy efficiency also has rebound effects, which increases energy consumption and emission. So this paper arms to capture the rebound effects of efficiency improvement by considering zero-cost breakthrough of energy efficiency and price jump of energy purchase. First, energy efficiency improvement, measured by zero-cost breakthrough of energy efficiency, stimulates energy consumption, but it may reduce the total emission. Second, both the direct and indirect rebound effects of energy efficiency improvement on energy consumption and environment are captured. Interestingly, jumping energy price decreases both the direct and indirect rebound effect. Finally, the result of the paper shows that restriction of individuals' entry or competition restriction moderates the rebound effects of energy efficiency improvement. Highlights • Effect of competition on energy efficiency rebound effects is developed in theory. • Rebound effects of energy efficiency are captured under zero-cost breakthrough. • Moderate monopoly is proofed to be helpful for reducing energy efficiency rebound effects. • Improvement of energy efficiency has both direct and indirect rebound effects. • Energy price jump has offset effects on rebound effects of efficiency promotion. [ABSTRACT FROM AUTHOR]

Improving energy efficiency in industry is recognized as one of the most vital activities for the mitigation of climate change. Consequently, policy initiatives from governments addressing both energy-intensive and small and medium-sized industry have been enacted. In this paper, the energy end-use and the energy efficiency potential among industrial small and medium-sized companies participating in the Swedish Energy Audit Program are reviewed. The three manufacturing industries of wood and cork, food products and metal products (excluding machinery and equipment) are studied. A unique categorization of their production processes’ energy end-use is presented, the results of which show that the amount of energy used in various categories of production processes differ between these industries. This applies to support processes as well, highlighting the problem of generalizing results without available bottom-up energy end-use data. In addition, a calculation of conservation supply curves for measures related to production processes is presented, showing that there still remains energy saving potential among companies participating in the Swedish Energy Audit Program. However, relevant data in the database used from the Swedish Energy Audit Program is lacking which limits the conclusions that can be drawn from the conservation supply curves. This study highlights the need to develop energy policy programs delivering high-quality data. This paper contributes to a further understanding of the intricate matters of industrial energy end-use and energy efficiency measures. [ABSTRACT FROM AUTHOR]

This paper provides a detailed analysis of the Tokyo Metropolitan Emissions Trading Scheme (Tokyo ETS), Japan’s first emissions trading scheme with mandatory cap initiated by the government of Tokyo. Unlike trading schemes in other countries, the Tokyo ETS covers indirect emissions from the commercial sector. It is well known that a variety of market barriers impede full realization of energy efficiency opportunities, especially in the commercial sector. Experiences with the Tokyo ETS should therefore provide important lessons for the design of climate change mitigation policies, especially when targeting the commercial sector. The emissions from covered entities have been drastically reduced from those at the scheme’s outset, with an average 14% reduction as of the end of the first commitment period of five years (2010-2014) compared with 2009 levels. This paper shows that the Tokyo ETS alone did not cause these reductions; there were other drivers. Among them, the energy savings triggered by the Great East Japan Earthquake in 2011 were crucial. The contribution of credit trading, in contrast, was limited since most of the covered entities reduced emissions by themselves. Through an investigation of official reports, an assessment of the emissions data from the covered entities compared to those of uncovered entities and in-depth interviews with firms covered by the scheme, this paper confirms that the main drivers of emissions reductions by covered entities were separate from the ETS. In fact, the advisory aspect of the scheme seems to be much more important in encouraging energy-saving actions. Key policy insights Most of the observed emission reductions were not caused by the Tokyo ETS alone. An advisory instrument was crucial to the effectiveness of the Tokyo ETS. The experience of the Tokyo ETS suggests that making full use of the advantages of emissions trading is difficult in the case of the commercial sector. Price signals have not provided a stimulus to climate change mitigation actions, which implies that establishing a cap to yield effective carbon prices poses a challenge. [ABSTRACT FROM AUTHOR]

The role of energy transition amidst the energy crisis and how policymakers can drive down emissions while focusing on energy security are critical. Given the geo-political situation, energy crisis volatility, energy shortage and climate change all affect the green transition and the short-term priorities for energy companies and policymakers. Energy security is not an isolated issue but has widespread implications as various sectors depend on energy supply to function properly. Governments around the world are faced with this trilemma, how to balance energy security with energy sustainability while also considering energy affordability. Sustainability has been in focus for about a decade. However, energy security is suddenly becoming one of the most important priorities that policymakers need to consider. Unfortunately, the renewable energy infrastructure is not yet ready to replace the growing volume of energy demand from hydrocarbon, which the world has been dependent on. This means, for now, a surge in energy generation through hydrocarbon to meet the existing energy demand deficit. However, it is important not to lose focus on the challenge of energy sustainability and climate change adaption and mitigation. Where trends like carbon capture and storage; solar, wind, hydro, green hydrogen, etc.; renewable energy infrastructure and integrations, with supply chain and engineering services consideration [in aspect for the growing market in this space] need better attention with regards to investment and full-scale implementation. This paper aims to analyze this 1st energy crisis of green transition with a priori on energy poverty with consideration of major influences and associated impacts. Furthermore, it proposes a specific framework for inclusive investigations, which considers the entire energy ecosystem with consideration of major influences, to enable the policymakers to better drive the green transition. This involves formulating energy policies that are not entirely conservative towards renewable energy sources but instead promote investments in both green and relatively more environmentally benign energy sources compared to high emission hydrocarbons. In this regard, this paper renders exhaustive prospects and recommendations. • The nexus between energy transition, energy poverty and their impacts are investigated. • Influence of climate change, COVID-19, geo-politics, and energy infrastructure on energy transition. • Exhaustive prospects and recommendations are rendered. • Requirement for inclusive investigations and recognition of energy poverty. [ABSTRACT FROM AUTHOR]

The growing awareness of climate change is constantly moving the attention of designers and policymakers from typical and current scenarios to future layouts. This new approach introduces a degree of uncertainty that should be accounted in the building design process. The multitude of possible scenarios suggests considering dynamic system that can adapt themselves to unpredicted operating conditions. The aim of this study is to test a new approach and a new flexibility metric analysing the behaviour of a high-performance dynamic internal curtain in current and future scenarios. The first part of the paper focuses on the optimization of the dynamic system in the current scenario; this preliminary analysis represents the traditional design approach and is considered the baseline for all the comparisons. Hence, defining a matrix of likely scenarios, this paper explores the behaviour of three different selected control strategies – always off (i.e., no curtain), fixed control, optimized control – in the different scenarios considering possible variations of i) climate, ii) urban context, iii) internal loads, and iv) building use. The main outcomes of the research are, on the one hand, the comparisons of the control strategies and the benefits of the dynamic system and, on the other hand, the definition of a new metric that can properly describe the flexibility of the building systems with reference to the future scenarios analysed. This metric is based on six classes – which describe the statistical distribution of the energy consumptions of all the scenarios simulated in the matrix – and an index called Energy Flexibility Index (EFI) that quantifies the flexibility of the technology considered. The case study analysed highlights how implementing a dynamic shading system, considering the same building use, can increase the EFI of nearly 21% for non-optimized control strategy and up to 23% when optimized. While changing the building use in residential reduces these values respectively, to 6% and 7%. [ABSTRACT FROM AUTHOR]

In order to improve the thermal comfort of the occupants within the buildings in summer and winter climates, the current study thoroughly examines several designs using the Trombe wall. This aids green building designers in making the best decision in light of the environment's present state and constantly changing climatic circumstances. In addition to using locally accessible resources to reduce the expense of importing substitute materials to create these structures. With a global view on energy conservation, there is a focused effort and research endeavor toward decreasing energy usage in light of the worldwide energy crisis and growing prices. Alternative solar energy must be maximized to provide thermal comfort for cooling and warming situations with the least amount of energy. A Trombe wall is a cost-effective and ecologically friendly approach to harness solar power to provide summertime natural ventilation that lowers inside temperatures. On the other hand, it causes overheating in the winter as the massive wall stores heat and transfers it to the interior of the building. The present study reviews previously published papers on all the various improvements made to the Trombe solar wall for optimization that deals with improving the performance of heating/cooling conditions through various experimental and numerical approaches. The current research shows that there are research gaps in many different improvement systems, which were clarified at the end of the research paper. Integrating the Trombe solar wall and PCM achieves a maximum energy saving of 36% in the summer and up to 55% in the winter. • A shortage of Trombe wall evaluation in the Middle East conditions was observed. • Employing the Trombe wall to buildings led to a reduction in energy demand. • TW system provided the proper internal thermal comfort during the summer/winter. • Investing in renewable energy results in energy source diversification and cost savings. [ABSTRACT FROM AUTHOR]

Nowadays, one of the factors that have an impact on climate change is wastewater treatment facilities. The main greenhouse gas (GHG) emissions are carbondioxide (CO2), nitrous oxide (N2O) and methane (CH4) in waste water treatment plants. GHG emissions are caused by several items such as the electric consumption, treatment process, sludge treatment, sludge transportation for disposal in the WWTP. The purpose of this paper is the optimization and estimation of GHG emissions from a central wastewater treatment plant in an organized industrial district in Tekirdag. GHG emissions from WWTP have been calculated using ECAM web tool that is designed by WaCCliM organization. This work analyzed GHG emissions are compared and estimated for different months with in two sections. The highest emissions were estimated in December to be 226.573 kgCO2eq/month because the wastewater flow and wastewater load were increased. The highest emission in summer months was estimated to be 195.174 kgCO2eq/month for July. The results of this work showed that the most of expenses are spent through electric energy consumption and sludge transportation and disposal in the WWTP. GHG emissions are minimized if it is increased the use of renewable energy sources and is decreased to produce disposal sludges. [ABSTRACT FROM AUTHOR]

• Climate change's impact on retrofitting was tested on Le Corbusier's apartment. • Climate change scenarios project up to 70% increase in summer overheating. • Adaptive natural ventilation can reduce warm discomfort of 50–60%. • Adaptive setpoints can reduce total energy consumption of 20–30%. • Adaptive strategies are particularly favourable in historic buildings. Historic buildings, often exempt from retrofits to preserve originality, require retrofitting due to potential future climate-related indoor issues. For Modern Architecture constructions, there is a need to find solutions that help address the discomfort and heat losses caused by the extensive use of glazing. By analysing Le Corbusier's studio-apartment this paper aims to inspect: (i) Solutions for energy, Indoor Environmental Quality, and preservation; (ii) Climate change impact on them; (iii) Possible adaptation strategies to cope with climate change. Spectrally selective glazing reduced summer overheating by 15%; high-performance glazing lowers cold discomfort (24%) and heating (22%) but increased warm discomfort; shadings maintained energy use and reduced summer discomfort by up to 44%; thermal insulation can reduce winter discomfort and halves energy use but raised summer discomfort by up to 41%. Tests on 2050–2100 climate change scenarios reveal up to 70% more warm discomfort hours. Adaptive strategies can help, with natural ventilation cutting warm discomfort by 50–60%, and adaptive setpoints reducing cooling demand by about 35%. Adaptive strategies can complement traditional retrofitting in addressing current and future climate conditions, especially in historic buildings that require minimal interventions to preserve their historical characteristics and enhance resilience. [ABSTRACT FROM AUTHOR]

The regional impact of climate change on heating and cooling demand is important to consider when designing optimal long-term energy policies. Several studies have addressed this issue, but either at a very aggregated level or without optimizing the whole energy system. The aims of this paper are to fill this gap in a generic way and to assess the impact of climate change on heating and cooling energy demands for residential and commercial sectors at the regional and nodal levels in the context of Chile's energy transition. We propose a methodology based on high resolution climate simulations for the Representative Concentration Pathways (RCP) RCP 2.6 and RCP 8.5 scenarios. First, a statistical analysis is performed to estimate the long-term trends of so-called heating and cooling degree-days and their impact on final regional energy demands. Then, demand pathways in the energy transition are assessed using a multi-sectoral energy planning model. Numerical experiments using data from Chile show an overall positive economic impact of climate change (limited to heating and cooling demands) for the energy system, with a significant decrease in heating demand compared to a limited increase in cooling requirements. For the RCP 8.5 scenario, cost reductions reach 2.1% of the total discounted system cost on the 2020-2050 period mainly due to a significant decrease of gas consumption for heating. This research highlights the importance for policymakers to consider climate change in efficient energy policies. [Display omitted] • Climate change impact on heating/cooling is assessed for Chile's energy transition. • Significant heating demand decrease and low cooling demand increase are observed. • A global positive economic impact for the energy system is estimated. • For the RCP 8.5 scenario, cost reductions reach 2.1% of the total discounted system cost. [ABSTRACT FROM AUTHOR]

The issues of energy efficiency and climate change belong to a complex scenario to which contemporaneity is called upon to answer. Architecture can contribute by promoting practices that look at the environment with a view to building the future. As an architectural activity, restoration of heritage buildings can actively participate in this fundamental challenge within the perspective of a circular economy proposing a globally sustainable model. Starting from a state-of-the-art investigation, this paper aims to enucleate the BECK project’s contribution in this field, as well as to underline how careful strategies of conservation and contemporary use can have positive effects on sustainable future scenarios. [ABSTRACT FROM AUTHOR]

The assessment of industrial-level energy efficiency's (EE) development is a critical research topic that has entrenched in the global battle against climate change. Under the Energy Efficiency Directives 2012/27/EU and 2018/2002/EU, European Commission sets specific industrial energy efficiency targets, rules and obligations for the 2020-2030 period aiming, among others, at specific energy intensity reduction and energy efficiency improvements. In this paper we use a balanced panel of fourteen European industries from twenty-seven countries for the period 1995-2011 under a metatechnology framework. The aim of this study is to evaluate, at a first stage, the industrial total factor energy efficiency (TFEE) at a national and European level by incorporating technological heterogeneity through a nonparametric approach. Reflecting the divergent views on the importance of desirable and undesirable outcomes in the pursuit of TFEE, we additionally estimate industrial performance by prioritizing either economic or environmental aspects. At the second stage of our analysis, econometric models are applied to investigate the main factors of industrial TFEE using sector specific and country characteristics while we further proceed with a ß and s-convergence analysis for our TFEE measures. The results of this study reveal that small-scale economies exhibit persistent high TFEE scores. At the same time, TFEE determinants suggest that path dependence phenomena have a strong presence, climatic characteristics occur while energy mix displays both linear and non-linear relationship. Either considering one desirable output or consolidating the undesirable output in the production function our results indicate a strong evidence of conditional and unconditional convergence in TFEE scores. [ABSTRACT FROM AUTHOR]

• Quantitative assessment of the heat waves in different city zones. • Quantification of the heat waves impact on building energy performance. • Influence of heat waves on the indoor operative temperature. • Impact of the synergic effect of heat waves and urban heat island. Global and local climate change increases the occurrence and the magnitude of extreme phenomena, as urban heat island and heat waves. These phenomena seriously affect the quality of life in several aspects: society, health, environment; they also heavily affect the building sector, increasing the energy use for cooling and deteriorating the indoor thermal environment. This paper utilizes data from a continuous urban microclimatic monitoring over three years to quantify the impact of heat waves on the thermal quality of two reference residential buildings in the city of Rome, Italy. The synergic effect of heat waves with the urban heat island is also analysed. The observation period includes summers of 2015, 2016 and 2017. The buildings' response is analysed through numerical thermal analyses in transient regime, taking into account several variants: thermal insulation, mechanical cooling system and thermal free-floating conditions, with different night ventilation strategies. Results show that daily average temperature and urban heat island intensity increase by up to 4.3 °C and 1.5 °C respectively during the heat waves with respect to the rest of the summer. The building cooling energy use rises up 87% during heat wave periods, while average operative temperature in free-running buildings increments by up to 3.5 °C. Results also show the impressive combined impact of heat wave and heat island: triplication of cooling energy use in the worst case and increase of the average operative temperature above 5 °C. [ABSTRACT FROM AUTHOR]