Search

This paper presents a novel seven-level (7L) voltage source converter for high-power medium-voltage applications. The proposed topology is an H-bridge connection o f two nested neutral-point clamped (NNPC) converters and is referred to as an HNNPC converter. This converter exhibits advantageous features, such as operating over a wide range o f output voltages, particularly for 10-15 kV applications, without the need to connect power semiconductors in series; high-quality output voltage; and fewer components relative to other classic seven-level topologies. A novel sinusoidal pulse width modulation technique is also developed for the proposed 7L-HNNPC converter to control flying capacitor voltages. One of the main features o f the control strategy is the independent application of control to each arm of the converter to significantly reduce the complexity of the controller. The performance of the proposed converter is studied under different operating conditions via MATLAB/Simulink simulation, and its feasibility is evaluated experimentally on a scaled-down prototype converter. [ABSTRACT FROM AUTHOR]

The nested neutral-point clamped (NNPC) converter is a four-level converter topology for medium-voltage applications with interesting properties such as operating over a wide range of voltages (2.4-7.2 KV) without the need for connecting the power semiconductor in series, high quality output voltage, and less number of components in compare to other classical four-level topologies. The control and balance of the flying capacitors (FCs) of the NNPCconverter can be done by different control techniques taking advantage of the large number of redundant switching states. This paper presents a simple single-phase modulator for the NNPC converter, which can be applied to each phase of a three-phase NNPC converter. The proposed simple technique can control and balance the FCs to their desired values. Performance of the proposed technique under different operating conditions is investigated in the MATLAB/Simulink environment. The feasibility of the proposed converter is evaluated experimentally. [ABSTRACT FROM AUTHOR]

In this paper, a new voltage source converter for medium voltage applications is presented which can operate over a wide range of voltages (2.4-7.2 kV) without the need for connecting the power semiconductor in series. The operation of the proposed converter is studied and analyzed. In order to control the proposed converter, a space-vector modulation (SVM) strategy with redundant switching states has been proposed. SVM usually has redundant switching state anyways. What is the main point we are trying to get to? These redundant switching states help to control the output voltage and balance voltages of the flying capacitors in the proposed converter. The performance of the converter under different operating conditions is investigated in MATLAB/Simulink environment. The feasibility of the proposed converter is evaluated experimentally on a 5-kVA prototype. [ABSTRACT FROM AUTHOR]

In this paper, a model-predictive control of medium voltage, grid-tied four-level diode-clamped inverter for use in high-power wind energy conversion systems is presented. The control objectives such as regulation of net dc-link voltage, reactive power generation to meet the grid operator request, dc-link capacitor voltages balancing, and switching frequency minimization are included in the cost function. The latter objective is an important requirement for high-power converters, and this has been achieved without any modifications to the software or hardware configuration. The future behavior of the grid currents and dc-link voltages is predicted for all the possible switching states using the discrete-time model of the inverter, dc-link, inductive filter, and grid. The switching state that minimizes the cost function has been chosen and applied to the inverter directly. During different operating conditions, the switching frequency is regulated between 750 and 850 Hz with the help of a lookup-table-based weighting factor, and thus, the proposed methodology appears as a promising tool to control the high-power grid-tied inverters. The results obtained through the MATLAB simulations on 4 MVA/4000 V system and dSPACE DS1103-based experiments on 5 kW/208 V prototype are in a close relationship and thus validate the proposed control strategy. [ABSTRACT FROM AUTHOR]